Used Bellow for sale (170)

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,330 mm, loading space height: 2,400 mm, loading space volume: 51 m³, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, KEMPF SKM 36/3 SHL-Light ? 3-Axle Steel Tipper New Vehicle Expected delivery date: February 2026 General Specifications Type: SKM 36/3 SHL-Light * Design: 3-axle semi-trailer tipper with conical steel trough * Permissible gross weight: 36,000 kg * Axle load: 3 x 8,000 kg * Fifth wheel load: approx. 12,000 kg * Nominal saddle height: 1,200 mm (technical: 1,200–1,260 mm) * Loading length: approx. 9,000 mm * Loading width: front 2,280 mm / rear 2,330 mm * Trough height: approx. 2,400 mm * Trough volume: approx. 51.1 m³ * Overall height: approx. 3,805 mm to loading edge (loaded) Chassis KEMPF welded fine-grain steel construction, sandblasted * Conical-offset design (offset approx. 80 mm) * All attached parts hot-dip galvanized * Chassis color: Jet Black (RAL 9005) * Trough color: White Aluminium (RAL 9006) * Tarp color: Silver (Mehler 911) * Side (white) and rear (red) contour marking to EC Directive Axles, Tyres & Suspension SAF INTRADISC plus Integral (Offroad version) * Disc brakes Ø 430 mm * Chassis laser-aligned (optimized tyre wear & consumption) * Lift axle (fully automatic, forced lowering when unladen) * Air suspension system with compact 300-mm bellows and lift/lower device * Quick air release fitted * Load gauge, tonne graduations, front left * Tyres: 385/65 R 22.5 * Rims: Alcoa Ultra ONE aluminium rims, Dura-Bright EVO, 11.75 x 22.5, ET 120 Braking System & Safety Electronic braking system (Knorr EBS) with RSP (Roll Stability Program) * ABS 4S/2M with stop light supply * Tyre pressure monitoring to ECE R141 (TPMS) * Trailer Info Module TIM G2 with brake wear indicator * Acoustic reversing warning system * Folding underrun protection (ECE R58.03) with spring lifting aid * Removable towing coupling (right side) * Reflex panel (200 x 1,130 mm) Hydraulics Front tipper cylinder Hyva (single-circuit hydraulic system, 190 bar) Gedpfx Ahjxn Eckj Dsuk * Hard-chromed piston * Hydraulic connection: Edbro 1" screw coupling * Tractor unit pressure can be adjusted if necessary Trough/Superstructure Conical steel trough (wider towards the rear) * Material: HARDOX steel (HB 450 / HB 500) * Floor: 5 mm HARDOX steel, continuous * Side walls: lower 4 mm / upper 3 mm HARDOX with reinforced edges * Front wall: 20° inclined, 3.2 mm HARDOX steel * Rear wall: * Double-winged (1/3 left, 2/3 right) * Non-swivelling, manual hook locking * Grain-tight with rubber seal * Slide gate 400 x 400 mm, manual lever operation * Rear wall approx. 40 mm lower (tarp can remain open) * Pneumatic vibrator, switch operation rear left * Catwalk with guard rail per accident prevention regulations, ladder left side, 2-step entry * Internal access via steps on the front wall * Shovel and broom mount on front wall Tarp & Roof Bows Roll tarp made of high-quality PVC (680 g/m²), color silver * 3 arched roof bows (1 fixed steel, 2 telescopic aluminium) * Crank operation right side, central locking left side * Aluminium tarp guard, swiveling and lockable * Accessories: stainless steel hooks/tension rod Lighting & Electrics Complete LED equipment to EC/ADR standard * LED three-chamber lights with chrome rings * LED rear fog lamp, LED license plate lighting * LED side markers with indicator function * Brake light (LED) * 2 additional LED reversing lights (side mounted) * Internal trough lighting (LED, switch left on frame with indicator) * Socket: 15-pin Accessories Two PVC toolboxes (each 660 x 500 x 4

Condition: new, We can deliver all spare parts for JUNG JF- und HF-series. z.B. grinding flanges, switches, bellows, refurbished grinding and transvers spindles, hydraulic pistons etc. Also equipment like magnetic chucks (new oder refurbished), dressers, filtrtion units, lubrication pumps etc. Gjdpfxogbt U No Ah Dsuk Also used parts which are discontinued by the manufacturer. Please inquire wih the exact part name.

Condition: used, mileage: 5,55,500 km, power: 294 kW (399.73 HP), first registration: 05/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2025, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, Special equipment: 2 power take-offs NAS/10 without top flange and with bottom flange, car telephone antenna, trailer data display, exterior mirrors and wide-angle mirror electrically adjustable and heatable, wide-angle mirror with electric maneuvering aid, battery 225 Ah, curb mirror right electr. adjustable and heatable, digital axle load display for axles with air suspension, pressure sensor for air suspension bellows, ETA automatic fuse, driver's cab: with air suspension, driver's seat comfort, air suspension, heated and air-conditioned with lumbar support, flame start system, transmission 12-speed - type: ZF 12 AS, Tipmatic, fuel tank: combi tank aluminum - 580 ltr. Diesel + 60 liters urea solution (AdBlue), air baffle against dust turbulence, 2-cylinder 720 cc air compressor, heated air dryer, Eberspächer D4S auxiliary air heater, battery emergency switch, retarder, stationary air conditioning system, 12V and 24V cab socket, fleet management system control module, door extension for cab, additional high beam/fog lights with cornering light Further equipment: Axle configuration: 4x2, ambient lighting, collision/front mirror, trailer socket 24V / 7-pin, trailer socket ABS, traction control system (ASR), audio system: MAN Media Truck Advanced 12V radio with navigation system preparation, MAN-Tronic on-board computer, rear axle differential lock, MAN-Brakematic electronic braking system, EURO 6 engine, cab: with Nordic insulation, cab: XLX, suspension: leaf / air, electric windows, remote central locking, tinted windscreen, generator 28 V 80 A, mechanical lifting roof, body/structure: tractor unit, rocker arm - brake EVB, automatic air conditioning, heated fuel filter, steering wheel with multifunction, raised air intake, engine 12.4 ltr. - 294 kW diesel, engine compartment encapsulation, wheelbase 3600 mm, side spare wheel lift, fifth wheel coupling: Jost JSK 37 C, rear axle disc brakes, front axle disc brakes, tinted rear side windows, seat cover / upholstery: Comfort quality, Sunblind for windscreen, Sunblind for side window, Driver's door, Spray mist reduction, Stabilizer bar on one rear axle, Stabilizer bar front axle, Storage box accessible from outside, Tinted door windows, Visco ventilator, Central locking, Perm. Gross vehicle weight 18.00 t Godpfsr Iv Dbsx Ah Deuk

Condition: used, mileage: 4,18,122 km, power: 265 kW (360.30 HP), overall weight: 26,000 kg, fuel type: diesel, color: grey, axle configuration: 3 axles, gearing type: mechanical, emission class: euro4, loading space width: 2,480 mm, loading space length: 6,350 mm, loading space height: 1,300 mm, first registration: 09/2009, total width: 2,550 mm, total height: 3,500 mm, Equipment: ABS, crane, soot filter, MAN 26.360 TGS Flatbed + PK 16502 Crane 6x2 Suspension: Leaf/Air Wheelbase: 5.10 m PALFINGER Crane Type: PK16502 Year: 2009 5x hydraulic extensions 2x hydraulic stabilizers 1x remote control Flatbed Length: 6.35 m Width: 2.48 m Height from ground: 1.30 m Special Equipment: - Storage box - Front axle load 9.5 t - 2 work lights on cab roof - Exterior and wide-angle mirrors, electrically adjustable and heated - Mechanical battery isolator switch - Kerb mirror on the right, electrically adjustable and heated - Rear axle differential lock - Air suspension bellows pressure sensor - Cab with 2 tinted rear windows - Comfort driver's seat, air-suspended and heated, with lumbar support and shoulder adjustment - Alternator 28 V / 110 A - 12-speed transmission - Type: ZF 12 AS, TipMatic - NOL-08 trailing axle, steered, liftable - PTO NH/4C - 2 rotating beacons - Seat covers / upholstery: comfort quality - Exterior sun visor - 12V and 24V cab sockets - Control module for external data exchange - 3-piece steel bumper - Front axle VOK-09 cranked - Additional heated fuel filter with water separator Further Equipment: - Axle configuration: 6x2 - Approach/front mirror - 24V / 7-pin trailer socket - ABS trailer socket - Anti-slip regulation (ASR) - Audio system: MAN basic Line radio (Radio/CD) - Battery 175 Ah - On-board computer MAN-Tronic - Electronic braking system MAN Brakematic - Cab: M (medium length) - Electric windows - Flamestart system - Tinted windscreen - Manual sunroof - EVB brake - Heated fuel filter - Fuel tank: 400 liters - Raised air intake - Air compressor 1-cyl. 360 cm³ - Air dryer - Engine 10.5 L – 265 kW diesel - Spare wheel holder behind rear axle - Rear disc brakes - Front disc brakes - Side underrun protection - Rear side windows tinted - Sunblind for windscreen - Spray suppression - Rear axle stabilizer - Front axle stabilizer - TGS - Tinted door windows - Rear underrun protection - Front underrun protection - Viscous fan - Central locking - Perm. gross weight 26.0 t We are also pleased to support you with financing/leasing through our partners. All information without guarantee. Subject to errors and prior sale. Gujdpfx Ahswzd Eyj Dek

Condition: good (used), Year of construction: 2014, functionality: fully functional, overall weight: 130 kg, GRUNDFOS electronically controlled dry-running pump TPE100-110/4AFA-BAQE, single-stage inline pump, Art. 96110379. PN16. 3 x 380-500 V DN100. Equipped with MGE100LC4-FF215-G3 motor. We offer a Grundfos electronically controlled dry-running pump. Gsdpfx Asutdbvoh Douk ⭐︎ Condition: Good (used) The electronically controlled dry-running pump is used but fully operational. The pump was in flawless working condition until it was dismantled a few weeks ago. Manufacturer: Grundfos Model: TPE100-110/4AFA-BAQE Description: Single-stage inline pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 1,455 rpm Rated flow: 85.9 m³/h Rated head: 8.692 m Mechanical seal: BAQE Pump housing: cast iron Impeller: cast iron Gross weight: 130 kg For further technical data, please refer to the nameplate. Scope of delivery as shown in the pictures. Inspection prior to purchase is possible and explicitly encouraged. Single-stage volute pump with opposing suction and discharge ports in inline design. The suction and discharge ports have the same diameter. The pumps are designed according to the top-pull-out principle, meaning the pump head (motor, cover, and impeller) can be easily removed for maintenance or servicing while the pump casing remains in the pipework. The pump is fitted with a non-balanced rubber bellows seal. The mechanical seal meets EN 12756 standards. Piping connection via DIN flanges PN 16 in accordance with EN 1092-2 and ISO 7005-2. The pump is equipped with a fan-cooled permanent magnet synchronous motor. The motor efficiency complies with energy efficiency class IE5 according to IEC 60034-30-2. For speed control, the motor features an integrated frequency converter and PI controller, both housed in the motor terminal box. Shipping is available, but shipping costs are to be borne by the buyer. Worldwide shipping possible.

Condition: as good as new (ex-display), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. Gsdpfx Ahjt E Nw Te Douk 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Other similar roller tables also available.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,430 mm, loading space height: 2,300 mm, loading space volume: 50 m³, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, KEMPF SKM 36/3 AK | 3-Axle Aluminium Tipper Semi-Trailer 50m³ | New Vehicle Delivery date: approx. January 2026 Vehicle Data Manufacturer: Fahrzeugbau KEMPF GmbH * Model: SKM 36/3 AK * Design: 3-axle tipping semi-trailer with aluminium box body * Target country: Germany * Permissible gross weight: 36,000 kg * Axle load: 3 × 8,000 kg * Fifth wheel load: approx. 12,000 kg * Nominal coupling height (loaded): approx. 1,200 mm (technically possible 1,200–1,260 mm) * Load length: approx. 9,000 mm * Load width: approx. 2,430 mm * Body height: approx. 2,300 mm * Body volume: approx. 50.3 m³ * Overall height: approx. 3,710 mm up to loading edge (loaded) ---Paintwork / Design Chassis: Deep black RAL 9005 * Attachments: hot-dip galvanized and powder-coated black * Axles and wheel hubs: black (KTL-coated) * Body: White aluminium RAL 9006 * Tarp: Silver no. 911 (Mehler) * Contour marking (side white, rear red) in accordance with EC directives ---Chassis and Running Gear Frame: High-quality welded construction from fine-grained steel, conical offset (approx. 80 mm) * Axles: SAF INTRADISC plus Integral | Off-road version, disc brakes Ø 430 mm * Lift axle: 1st axle, fully automatic lift, forced lowering in unloaded state * Air suspension: air suspension units with small air bellows (300 mm), plastic covers * Air reservoirs: aluminium version * Support legs: 2 aluminium drop-down legs, max. 24 t (2 × 12 t) * Mudguards: PVC half-shells with rigid spray suppressors * Toolboxes: 2 pieces, PVC, black, approx. 660 × 500 × 460 mm each * Side underrun protection: right side * Ladder: removable, aluminium, approx. 4,000 mm long * Access ladder: extendable at the rear (not UVV) ---Underrun Protection and Rear Foldable steel underrun protection according to ECE R58.03 * With spring-assisted lifting and integrated towing eye * Full-length KEMPF mudflap with large reflective plate (200 × 1,130 mm) ---Lighting and Electrics Fully LED version according to ADR standard * Marker, position, reversing, and rear fog lights in LED * 2 LED working lamps (left/right) * Cargo area lighting with switch and indicator * 15-pin electrical connector * Round lights with chrome rings * Without reversing camera ---Tyres Rims: Alcoa Ultra ONE aluminium wheels, Dura-Bright EVO, ET 120 * Tyres: 385/65 R 22.5, make at Kempf’s discretion ---Brakes and Safety Electronic Braking System (EBS) Wabco with RSS (Roll Stability Support) * ABS 4-channel (4S/2M) * Parking brake via spring cylinder * Axle load indicator via EBS-CAN bus (display in cab possible) * Trailer information module SmartBoard (Wabco) * Tyre Pressure Monitoring System (TPMS/RDKS) as per ECE R141 ---Hydraulics Hydraulic front tipping cylinder (Hyva), operating pressure 190 bar, single-circuit hydraulic system * Smallest piston hard chrome plated * Hydraulic connection: Edbro 1" screw coupling Godoxn Eb Hepfx Ah Douk ---Body / Tipping Body Aluminium rear tipper body made with hollow profiles * Front wall sloped 20°, approx. 5 mm thick, with robust supports for front cylinder * Floor approx. 7 mm thick, annealed aluminium * Side walls made from aluminium hollow profiles, continuous 2.5 mm internal wall, welded * Rear wall straight, swinging, double-winged (2/3 left, 1/3 right), automatic pneumatic locking * Rear wall control: left switch (swing function), right switch (door function) * Grain-tight design * Slide: approx. 400 × 400 mm, lever-actuated to the left * Dust sack with adapter frame (hopper approx. 250 mm high) * Catwalk with safety r

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout, Special Light Grey Paint, CE Compliant!!! Technical Data: - Year of manufacture: 1984, Machine No. 2203-1429 Gusdpfx Aew N Sfvjh Dok - Fixed angle table (newly planed) - Speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel X/Y/Z: 500/400/400 mm - Vertical milling head on spindle carrier, adjustable by 150 mm - Vertical and horizontal quill – SK40 - Vertical quill, 90 mm retractable - Drawbar system: M16 - Weight approx. 1500 kg Accessories and Equipment: - 3-axis Heidenhain digital readout - Coolant system - Swarf tray - Central lubrication About the machine: For sale is a Deckel FP4M universal milling machine, CE compliant, in very good condition. The machine is partly overhauled, with minimal play in the handwheels and all spindles move smoothly and evenly. Even at maximum speed, the milling machine runs quietly. Rapid traverse is available on all axes; all bellows are as new. The fixed angle table has been newly planed. A reliable and user-friendly machine. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout allows for easier and more precise work. Take the opportunity to view and test the machine under power on site.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1791, MATEC 30HV/NC X = 2,000 mm Y = 825 mm Z = 800 mm / horizontal Z = 675 mm / vertical - 1-axis CNC swivel head Swivel radius 300 mm, swivel angle max. +/- 105 degrees Direct path measuring system +/-3, optionally continuous or indexed with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Electronic handwheel (portable) - Remote diagnosis / remote maintenance - Tool magazine with 48 positions - Additional tool magazine with 216 positions Fixed tool magazine for loading the internal tool changer of a machine tool. Including: - Linear and rotary axes with drives - Controllers and sensors - Gripper for tool holder SK40 - Sheet steel enclosure - 6 tool levels for storing up to 216 tools with SK40 holders D = 80 mm or D = 160 mm if adjacent slots are free, comprising: 40 pcs. with L = 430 mm 64 pcs. with L = 260 mm 112 pcs. with L = 160 mm Maximum tool weight: 10 kg - Tool loading and unloading via tool flap - Transfer to machine via double gripper - Tool data entry via the machine operating panel, selection of tool positions via the operating panel of the additional magazine - Option: Operating panel for tool data entry at additional magazine - Additional price for motor spindle 9,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar - Internal coolant supply 40 bar - Compressed air to external nozzles - Internal compressed air through tool - Rotoclear - Automatic safety doors - HOWIMAT CNC 220.2/TMI-50 rotary table 1-axis precision indexing table with direct drive Indexing accuracy deviation max. +/- 10 seconds Radial/axial runout deviation max. +/- 0.003 mm - Single rotary union for rotary table or counter bearing - Zero-point clamping system integrated in the machine table, without draw studs and cover. - Tool breakage monitoring - Fully enclosed work area with roof - Bellows with steel lamellae - Direct measuring system X-, Y-, Z-axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Installation elements Gujdjxg D Atspfx Ah Dek

Condition: used, mileage: 1,43,560 km, power: 335 kW (455.47 HP), first registration: 03/2021, overall weight: 32,000 kg, fuel type: diesel, color: blue, axle configuration: > 3 axles, next inspection (TÜV): 04/2026, brakes: retarder, gearing type: automatic, emission class: euro6, loading space width: 2,420 mm, loading space length: 6,100 mm, loading space height: 1,000 mm, total width: 2,500 mm, total height: 3,600 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, Suspension: leaf-air Wheelbase: 4,800 mm Axles: lift-steer axle DUOMATIC Navigation system Rear-view camera Lane assist Including Palfinger rear crane preparation BK009-01A Special equipment: 2-line trailer brake, connections on the left 220 Ah battery Standard and DuoMatic brake connections Interactive multimedia cockpit 2 air horns on cab roof Electrical pre-installation in cab 24V / 100 A Cab: movable entry Cab: steel-sprung, comfort Remote online query function Speed limiter system 12-speed gearbox - Type: G 230-12 Rear axle crown wheel 300 Cabin filter for construction vehicles Comfort telephony (Bluetooth) with inductive charging cradle 3-piece fender with spray protection Fuel tank: 290 l steel left side Cool box / refrigerator Enhanced engine brake Trailing axle 8 t, steerable, liftable PTO MB 123-10c Wheelbase variant 4850 mm Chassis lowering without residual pressure control of air bellows Chassis overhang 1300 mm Rain sensor Retarder Reinforced rear cross member Additional remote-control key (2) Seat cover/upholstery: passenger seat velour Seat cover/upholstery: driver’s seat Dinamica fabric Cab seats: air-suspended driver’s seat, climate-controlled Cab seats: fold-down driver’s seat backrest Exterior sun visor Sun protection roller blind, side window driver’s door Additional stabilizer, rear/trailing axle Steel rims 11.75x22.5 (front axle) Additional 24V socket in front passenger footwell Pre-installation for 4 surround cameras (display in onboard monitor) Pre-installation for rotating beacon Gearbox oil cooler Further equipment: Emission standard EURO 6 Axle configuration: 8x2/4 Front axle load 7.5 t Heated starting/front mirror 24V / 15-pin trailer socket Arocs 5, exhaust to right side Two-piece exhaust system Exhaust pipe bend above 2nd axle Batteries arranged one above the other Compressed air connection in cabin Steel compressed air tank Condensate monitoring air unit Medium air system Automatic driving light activation (light sensor) Cab: Hydraulic tilting device Cab: M ClassicSpace, 2.30 m, 170 mm tunnel Suspension: leaf/air Front springs 7.5 t, 3-leaf Electric window lifters tinted windshield Vehicle without rear wall window Generator 100 A Urea tank (AdBlue): 25 l Manual roof hatch (steel) Body/chassis: chassis, comfort locking system Non-regulated power steering pump Multifunction steering wheel Power steering oil cooling 2-cylinder air compressor Heated air dryer Engine 10.7 l - 335 kW in-line 6 diesel (OM 470) Engine variant OM 470 Intended use: local transport Ramp mirror Residual heat utilization Disc brakes with partial protection Disc brakes front and rear axles Remote-control keys (2) LED side marker lights (flashing) Servotwin power steering Passenger comfort seat in cab Front spray guards Front axle stabilizer Steel rims 9.00x22.5 12V socket in front passenger footwell Front steel bumper corners Tachograph / EC control device Automatic daytime running lights Truck Data Center 7 (fleet management system) Fixed rear underride guard Front underride guard Pre-installation for toll recording Pre-installation Truck Data Center (fleet management system) Dropped front axle Regulated water pump Godpfx Asw Umkdjh Deuk Permissible gross weight 32.00 t We are also happy to assist you with financing/leasing through our partners. All information is provided without guarantee. Errors and

Year of construction: 2015, condition: used, workpiece diameter 300 mm workpiece weight 999 kg workpiece height 145 mm Features: -Digital display vertical axis -Automatic feed -Programmable automatic end stop -Grinding spindle drive with infinitely variable electronic speed control -Infinitely variable cross feed and table rotation -24V magnetic clamping plate 300 mm -Various occupational safety devices, e.g. protective cover monitoring, operating status display via traffic light -Lubricating oil level monitoring -The machine was completely overhauled in 2015, at which time the entire electrical system was replaced with PLC control and 24V control voltage -Paper belt filter system specially designed for this machine The following work has now been carried out: -Replacement of bellows and belts -New bearings for grinding spindle -Grinding carriage bed and rotary table bed scraped by hand Guodpfsxflcljx Ah Dok to restore better and more precise running characteristics -Grinding carriage and cross table lifted from machine body and all tracks cleaned, lubrication checked -Various wear parts, such as rubber caps and switching elements, replaced -Detailed functional check -Modernisation of feed arm -Paint touch-up work, machine colour: light grey RAL 7035 and RAL 7012

Condition: used, functionality: fully functional, Year of construction: 2009, 1 Universal Testing Machine Type H 10 KM Used device with Windows 11 software for tensile, compression, and bending tests; comes with one pair of wedge grips up to 10 kN and a certificate for tensile and compression displacement measurement. For testing in tension, compression, shear, bending, etc. • This is a dual-spindle benchtop model. • The machine complies with DIN 51220 and 51221, Class 1. • Digital display for force and displacement, 4½ digits, with peak value memory. Guodpfoxghlfox Ah Djk • Five-range automatic switching for force and displacement measurements. • Digital speed adjustment from 0.5 to 1000 mm/min in increments of 0.1 mm. • Break detector and automatic return function are standard features. • Driven by a precision servo motor with high-frequency chopper control unit and digital feedback for load-independent, constant speed. • Quiet operation thanks to toothed belt drive and ball screw spindles with bellows cover. • Fully computer-controllable via RS 232 interface. Max. load: 10 kN in tension and compression Max. travel: 1150 mm without grips Force measurement: Strain gauge Measurement principle: Temperature-compensated Displacement measurement: Built-in optical encoder, 0.01 mm resolution Power supply: 220-250 V, 50-60 Hz Power consumption: 1.0 kW Dimensions: Height 1575 mm, Width 635 mm Clear width of frame: 410 mm Weight: approx. 95 kg Includes: 10 kN load cell and certificate for force and displacement.

Condition: used, maximum load weight: 30,240 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2017, next inspection (TÜV): 12/2025, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, Kempf SKM aluminum tipping trough Gjdovpa Nljpfx Ah Deuk * BPW axles with air suspension and disc brakes * 1st axle can be lifted * Tires 385/65R22.5 * Air suspension raise/lower * Spare wheel holder * Work lights * Roll-up roof tarpaulin * Work platform with access * Aluminum drop supports * Brake pads on second and third axle replaced * Six air suspension bellows replaced * New TÜV approval We are happy to provide you with further information

Condition: used, mileage: 2,65,905 km, power: 309 kW (420.12 HP), first registration: 10/2018, overall weight: 26,000 kg, fuel type: diesel, color: grey, axle configuration: 3 axles, next inspection (TÜV): 11/2025, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, navigation system, parking heater, Stock No. 5674 Mercedes Benz 2642 Arocs with HIAB XR21S51 Hooklift / Container lengths up to 6.00 m / 6x4 / Hub Reduction Axles / 265,905 km ---- * Manufacturer: Mercedes Benz * Model: 2642 Arocs * Mileage: approx. 265,905 km * Transmission: Automatic (Powershift) * Gross Vehicle Weight: 26,000 kg * Unladen Weight (as per registration): 11,606 kg * Payload: 14,394 kg * Axle Configuration: 6x4 / Hub Reduction Axles * Wheelbase: 3.90 m * Suspension: Front leaf springs, rear air suspension Gusdpfx Ahjxffk Ns Djk * Tyres: 1st axle 385/65 R22.5 / 2nd & 3rd axles 315/80 R22.5 * Cab: M-Cab ClassicSpace / 2 seats * Colour: Grey * MOT (TÜV): 11/2025 * ABS / EBS / ASR * Power: 420 hp / Euro 6 * HIAB XR21S51 hooklift (year of manufacture: 2018) * Container lengths: 4.50 m to 6.00 m * Preparation for front snow plough * 1x 390-litre aluminium diesel tank, left side * 1x 60-litre AdBlue tank, left side * 1x toolbox, right side * 1x open mesh box, right side * 2nd & 3rd axles: continuous aluminium mudguards * 50 mm trailer coupling with air, electrical and hydraulic connections * LED work lights on the back of the cab * Additional LED reverse lights * Additional LED front lights * Beacons * Sun visor * Roof hatch * Window in cab rear wall * Driver's seat with seat heating * Electrically adjustable and heated mirrors * Electric windows * Radio (CD/AUX/Bluetooth) * Navigation system * Multifunction steering wheel * Air conditioning * Auxiliary heater * Rocking mode * Hill-start assist * Engine brake * Cruise control * Central locking with remote control * First owner German vehicle! German documents! One owner! Further equipment as per manufacturer: Front axle load 8.0 t, 2-line trailer brake, audio navigation system Bluetooth comfort, nearside exterior mirror with maneuvering position, air horn, reinforced cab suspension rear, cab: steel suspension, comfort, front suspension: 8.0 t, 3-leaf, 12-speed gearbox - Type: G 230-12, construction vehicle interior filter, additional fuel pre-filter, 390 ltr. aluminium fuel tank, left, air intake behind cab, programmable special module, beacons left/right, reinforced rear end cross member, cab seats: comfort driver's suspension seat, exterior sun visor, steel rims 11.75x22.5 (front axle), steel rims 9.00x22.5, exterior stowage flap left, additional 24V socket in passenger footwell, CB radio preparation, additional water heater. Emission standard EURO 6, ABS can be disabled, axle configuration: 6x4, trailer socket 24V / 15-pin, Arocs, electrically adjustable and heated exterior mirrors, 170 Ah battery, rear axle differential lock, compressed air connection inside cab, steel air tanks, cab width: 2.30 m, movable cab entrance, hydraulic cab tilting device, ClassicSpace M-cab, cab floor with 170 mm engine tunnel, suspension: leaf/air, electric windows, tinted windscreen, 100 A alternator, urea tank (AdBlue): 60 ltr., manual sunroof (steel), rear axle pinion 233, 10.4 cm info display, interior pollen filter, body: tipper, unregulated steering power pump, 2-cylinder air compressor, heated air dryer, engine 10.7 ltr. - 315 kW R6 diesel (OM 470), engine brake, engine compartment encapsulation, PTO MB 131-2c, chassis lowering without residual bellows pressure regulation, ramp mirror, residual heat utilisation.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1786, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik One, table load: 1,500 kg, rotary table diameter: 800 mm, rotational speed (min.): 25 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, tool length: 460 mm, tool diameter: 200 mm, tool weight: 10,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MATEC-30HV X = 3,000 mm Gedexg Dhcspfx Ah Deuk Y = 825 mm Z = 1,100 mm / Horizontal Z = 975 mm / Vertical - 1-axis CNC swivel head Swivel radius 300 mm, maximum swivel angle +/- 105 degrees Direct path measuring system +/-3, optionally continuous or settable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Bellows with steel lamellae - Direct path measuring system on X, Y, Z axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Siemens Sinumerik ONE control Modern CNC system for highly productive machine tools, consisting of: NCU 1740 22" ITC2200 V3 display MCP 2200 machine control panel - Electronic handwheel (portable) HT2 - Telephone diagnostics / remote maintenance - Motor spindle 15,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar Tank capacity of paper filter system 900 l Filter capacity 160 l/min. - High-pressure coolant at external nozzles High-pressure coolant pump switchable via M-function in the part program to the external nozzles at the spindle head. #20 bar# - IK-compressed air through the tool - Partition wall for double-station system - 3D wireless probe - RTS table probe for measuring and inspection - UT-Tec collision monitoring - Automatic safety doors

Condition: used, axle configuration: 3 axles, first registration: 09/2017, loading space length: 10,550 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 50 m³, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension Disc brake 430 mm "Off Road Version" Gusdpfoxf Sn Isx Ah Dsk SAF-Intradisc axle assemblies 3 x 9 t with SAF air suspension, air bellows centrally arranged to the chassis longitudinal member, 1st axle liftable with start-up aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with electro-hydraulically lockable trailing steering axle, Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 40-50% remaining tread with Alcoa aluminum rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminum rims Landing Legs Mechanical version with one-sided operation in 2 speeds with swivel foot for air suspension, 2x20t support load Brake System According to E.C. standard, two-line system Wabco, spring-actuated parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard info center, aluminum air tank system Electrical System According to STVZO regulations with 2 five-chamber lights type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, All air and electrical lines are cleanly routed in plastic pipes! Tipper Body/Container body fully welded inside Aluminum tipping body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide welded, floor 8 mm thick high-wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as double-wing door in straight version with 2 wing doors 1/2-1/2 design, each with a grain hatch, air vibrator under the floor with pneumatic control, rear bow in aluminum can be swivelled, two hold-down devices with rubber buffers attached to the tipper body at the front wall, Hydraulic System Tipping cylinder with "Cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted on front wall with operating pressure 220 bar, brand Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flap across the full vehicle width attached to the underrun protection, ALU spare wheel holder, foldable side underrun protection on the right, large toolbox type 860, approx. 3 m aluminum ladder, 3 centrally raised aluminum swing hoops approx. 150 mm higher, roll tarp with central light strip and separate reinforcements in the wear areas approx. 660 g/m² quality with roll tarp system, all-round rubber rope at the rear end of the tarp with two hooks to attach to the rear swing hoop, catwalk on container body with access on the left, tarp closure on the side with tension belts, rear tarp closure with welded-in rubber rope to prevent water ingress, robust foldable underrun guard in aluminum with two towing eyes left and right incl. fastening bolts, 2 "Clear-Pass" spray flaps on mudguards according to EC standard, etc. Offer and images subject to confirmation.

Condition: used, Year of construction: 2002, grinding diameter 450 mm Gujdpfsuxfu Nsx Ah Dok grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Year of construction: 2024, condition: new, machine/vehicle number: H3000-H5000TM, Universal testing machine H3000TM-H5000TM according to DIN EN ISO 7500 The universal testing machine of the H3000TM-H5000TM series is a single-spindle machine, a robust construction made of aluminum and V2a with ball screws, ball bushing guides and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor controlled and has a membrane keypad. The 2-line LCD display shows the force and travel. The testing machine can be used as standalone or with a PC via USB interface. The displacement is measured by means of an encoder 0.01 mm visible resolution on LCD (internal 0.0001mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally it is possible to add a second channel for a second load cell or a displacement transducer. The universal testing machine is manufactured with two different travels, 500mm or 1200mm (without load cell and testing tool). Further scope of delivery: One load cell up to nominal load, 220 Volt cable, USB cable, description, CE declaration of conformity. For more information, please refer to the attached description. Load cell 3000N-5000N Measuring range: 5-5000N tension and compression, with nom. 2mV/V output signal, overload protection: +/- 1000%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate Long travel extensometer HE 900mm measuring travel, measuring arms motorized, including electronics Guedpfx Ahsiq Hxkj Dok Accuracy class class 1 from 1mm travel according to DIN EN ISO 9513 Measuring principle optical incremental Measuring path 900 mm , minus measuring length Display error 6 µm or 2 Resolution 1 µm Actuating force 10 cN Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps Lo adjustment is manual Measuring arm opening and closing is motorized specimen diameter 0-30 mm specimen thickness 0-30 mm sample width 0-100 mm Weight approx. 32kg Scope of delivery strain gauge complete with electronics Cutting edges round: 1 set each carbide / rubber wear parts measuring blades optional rectangular cutting edges ATTENTION: When using optional cutting edges a readjustment of the lo a readjustment of the lo stop is necessary.

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CO2-1125-5000, 1x Vacuum Belt Filter Completely constructed in stainless steel 1.4404/1.4571, grates in stainless steel 1.4301 Finish: pickled and passivated Including: 1x drive roller 508x1427 1x steering roller 88.9x1850 6x support/tension rollers 88.9x1850 1x VBF frame 1x VBF hood frame Gjdpexfvahsfx Ah Dsuk 1x safety grilles (1.4301) 2x spray pipes, each fitted with 12 nozzles 6x hood brackets for vacuum tube 1x mounting materials, incl. gaskets 1x holder for control valve and paddle 2x slide blocks for tension roller HMPE100 2x bearing blocks for scraper blade HMPE100 1x scraper blade HMPE100 1x drive SEW KH87/T R57 DRN90L4TF 2x bellows d100 wbz 100-E1 2x misalignment switches 2x emergency stop switches 2x emergency stop cords 1x pressure reducer 1x hose and coupling for connection to bellows 23x nozzle holders 23x nozzles 4x rubber seals for wash cabinet 1x rubber seal for suspension conveyor 2x double wash gutters

Condition: like new (used), functionality: fully functional, mileage: 5,500 km, power: 242.71 kW (329.99 HP), first registration: 12/2023, fuel type: diesel, color: white, axle configuration: 4x2, tire size: 315/80 R 22.5, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, machine/vehicle number: NM0KKXTP6KNA91282, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, soot filter, tail-lift, traction control, NM0KKXTP6KNA91282 - PT_003 - 1 year warranty STANDARD EQUIPMENT: Pre-Collision Assist ▪ Lane Keeping Alert (LDWS) ▪ Electronic Stability Program (ESP) ▪ Driver Alert System ▪ Roadside Information System (MOIS) ▪ Rear View Camera ▪ Blind Spot Information System (BLIS) ▪ Alcohol Interlock Facilitator ▪ Traffic Sign Recognition ▪ Emergency Stop Signal ▪ Tire Pressure Monitoring System (TPMS) ▪ EBS: Electronic Braking System with ABS & ATC (Automatic Traction Control) ▪ Differential Lock ▪ Improved Sound and Heat Insulation ▪ Air Conditioning ▪ Adjustable Steering Wheel ▪ Seat Belt Reminder ▪ Electric Windows & Height Adjustment via Remote Control ▪ Tinted Side Windows ▪ Multifunction Key Remote control, 2 pieces ▪ Heated and electrically operated side mirrors ▪ Spare wheel / rim front ▪ Halogen headlights ▪ Smart tachograph ▪ Medium bumper ▪ 19T GVW OPTIONAL EQUIPMENT: 4 bellows air suspension rear (C4AS) ▪ 315/80 Continental tires ▪ 4.375 FDR ▪ 8T front axle ▪ Armrests driver's seat ▪ Electrically tiltable cab ▪ Colored front bumper ▪ Full Trailer Pack 2: O3 with towing capacity up to 10T ▪ Manual sunroof ▪ NH4C PTO ▪ Rain sensor with automatic headlights ▪ 3 seats ▪ Side underride protection ▪ Aluminum rims ▪ 350L fuel tank BODY: Loading bed with D'hollandia tail lift with 2,000kg loading capacity Discover our dealers via the website fordtrucksbelux.be Interested? Feel free to contact your nearest Ford Trucks dealer. Gjdjwa Tuzspfx Ah Douk - Herman Noyens Trucks NV

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0728, X = 5,000 mm Y = 1,025 mm Z = 1,100 mm / Horizontal Z = 1,000 mm / Vertical - Continuously adjustable NC swivel head, +/- 105 degrees, as a CNC axis for horizontal and vertical machining, indexing accuracy +/- 5 seconds - Heidenhain iTNC530 controller, hard disk with approx. 21 gigabytes of free space - HSK100 motor spindle, speed range 20-8,000 rpm, drive power 44 kW, torque 350 Nm - NC rotary table SKH 4/630 Horizontal faceplate Faceplate diameter: 630 mm Standard height: 300 mm Indexing accuracy: +/- 12" Max. load: 900 kg Max. tangential torque at 63 bar: 2400 Nm Includes AC motor with integrated rotational measuring system and hydraulic clamping, as well as an additional CNC axis - NC rotary table SKH-NC 9/1450 Horizontal faceplate Faceplate diameter: 1450 mm Indexing accuracy: +/- 12" Without direct measuring system Max. load: 5,000 kg Max. tangential torque with clamping: 16,000 Nm Includes AC motor with integrated rotational measuring system and hydraulic clamping, as well as an additional CNC axis Special enclosure for rotary table diameter 1450 mm included Swing circle diameter: 1500 mm No turning operation possible! - 60 tool stations - Fully enclosed working area with roof - Bellows with steel lamellae - Direct measuring system for NC rotary table, indexing accuracy +/- 5 degrees - Direct linear measuring system for X, Y, Z axes - Chip conveyor - Rinsing gun - Centralized oil lubrication - Working area lighting, 6-fold - Mounting elements - 3D wireless measuring probe - Tool probing system for measuring and checking cutting tools in the machine, TT140 - Unilok ESM 130 zero-point clamping system 36 units integrated in the machine table Guodpfx Asxgnfxjh Dsk 16 units embedded in the rotary table faceplate (diameter 1450 mm) 4 units embedded in the rotary table faceplate (diameter 630 mm)

Condition: used, Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling Gsdpfxsg A U Nnj Ah Dsuk -Claw coupling: Torsionally flexible claw coupling -Bore: Ø 10 mm -Dimension:Ø 90 x 70 mm -Weight: 1,8 kg

Condition: used, Lamellar aprons, samurai aprons, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, -Width: 730 mm -Extendable to: 1600 mm -Number: 2x covers available -Price: complete for 2 pieces -Dimensions: 1600/730/165 mm -Weight: 34 kg/piece Gujdpfx Ajd Nkr Djh Dek

Condition: used, Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: Torsionally flexible claw coupling -Bore: Ø 29 mm -Number: 3x coupling available -Price per piece Gedpog A I Ebsfx Ah Douk -Dimension: Ø 225 x 180 mm -Weight: 26.4 kg/pc.

Condition: used, Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling Gusdpfxeg A U N Do Ah Dsk -Manufacturer: Poly, torsionally flexible claw coupling type PKZ 15/1 -Bore: Ø 15 mm -Dimension: Ø 157 x 130 mm -Weight: 9.6 kg