Used Belt Dryer for sale (11,983)

Condition: used, Year of construction: 2011, Manufacturer: BEGA capacity: 21 m3/min Ijdpfouk A Enjx Ab Ioa

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: Iodpfx Abswp Rqfs Isa • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 30,000.00 EUR (VAT is not included)

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 2-Belt Wide Belt Sander - Usable working width: 1100 mm - Abrasive belt dimensions: 1120 x 2150 mm Ijdpfx Absxz Ials Iea - Max. workpiece thickness: 160 mm - Steel calibration roller, Art. 018: 150 mm - Sanding shoe width: 50 mm - Motor power: 14.7 kW - Belt speed: 18/16 m/s - Feed motor power: 0.55 kW - Adjustable feed conveyor with infinitely variable speed: 4–20 m/min - Motorized height adjustment: 0.24 kW - Mechanical belt oscillation "ECO GEAR PATENT SYSTEM" - 1 pc. drum brake for belt deceleration - Swiveling roller for belt tensioning - 3 pcs. rubber-coated pressure rollers - Emergency stop bar at infeed - Electronic workpiece thickness display - 2 extraction ports, Ø 160 mm - Automatic table positioning Additional options: - Electronically segmented sanding pad with 20 segments - Increased belt motor power to 14.7 kW instead of 11 kW - Frequency-controlled feed speed - Electronic machine function control with 7" touchscreen BASE MACHINE ACCORDING TO CE STANDARD Art. 029 IMPORTANT: New patented belt oscillation system 1. No valves 2. No light barrier 3. Not sensitive to dust 4. Energy-saving and environmentally friendly system Availability: Short notice Location: Holm

Condition: used, Year of construction: 1998, Belt sanding unit for machining the side surfaces of workpieces with a pneumatic belt tensioner. Technical specifications: Belt sanding unit: - Tilting device from -1° to +15° - Belt size 2500 x 100 mm - Cutting speed 18/36 m/s - Motor 3.7/4.4 kW Isdpjxqqczofx Ab Ija - With protective cover and 120 mm diameter connection for hose attachment to dust extraction system - Two-roller system for slack belt sanding. Roller diameter 75 mm, axle distance adjustable from 225 to 320 mm - Swiveling horizontal slide, travel 130 / 220 mm, operated via handwheel - Solid mounting bracket for sanding unit - Feed unit, pneumatically controlled, travel 5 - 20 mm Table unit: - Linear workpiece carrier table with automatic feed, travel 700 mm, clamping surface 300 x 250 mm, working speed from 15 - 150 mm/s, working stroke freely programmable by automation - Cable drag chain for cable duct, for electrical wiring and pneumatic hose - Clamping of workpieces via spring, unclamping via pneumatic cylinder

Condition: ready for operation (used), Year of construction: 1996, The object of my auction is a belt conveyor of length 14 tape width 0.65m Possibility of transport. Ijdpevbvgqsfx Ab Iea Möglichkeit des Transports.

Condition: good (used), Code: 0249 Brand: SCM Model: SANDYA 3 - RCS - CE Standard Automatic 2-belt calibrating sanding machine for carpentry, furniture, custom-made furnishings, wooden window frames, panels and various - CE Standard Technical data: Working width 950 mm Min/max working thickness 4/170 mm Abrasive belt dimensions 1900 x 970 mm Motor power 10 Hp Isdpjxz Hcrsfx Ab Ioa Belt feed speed 4,5/9 mt/min 1° Group: Steel calibrating roller 2° Group: Combined group equipped with 45 Shore rubber sanding roller - Finishing pad Automatic table positioning Digital display of working thickness Infeed and outfeed roller conveyors Compressed air 7-8 bar Suction inlet diameter 140 mm Overall dimensions mm 1350 x 1600 x 2000 h Weight kg 970

Year of construction: 2003, condition: good (used), capacity: 350 m3/h Iodofl Ig Ropfx Ab Iea

Condition: ready for operation (used), Year of construction: 2018, operating hours: 3,551 h, Additional Equipment Steel roller Belt release Rubber roller with a device for a needle roller (unused) This Kundig Premium-2 1350-RG belt sander was manufactured in 2018. It features a steel roller and a rubber roller, complemented by a belt release system. Accessories include two 3-meter roller conveyors, remaining sanding belts, V-belts, and various small parts. Consider the opportunity to buy this Kundig Premium-2 1350-RG belt sander. Contact us for more information about this machine. Isdpfexzlpwsx Ab Ioa Application Types Sanding

Condition: used, Year of construction: 1990, Used machine Year of manufacture: 1990 Features and technical data: Iedpfx Aowxh Dusb Ioa Max. working width: 1100 mm Min / max. workpiece thickness: 3 / 160 mm Sanding belt dimensions: 2150 x 1120 mm Sanding belt speed: 18 m/sec Feed speed: 4 + 8 m/min Sanding unit motor power: 15 kW Feed belt motor power: 1.1 / 1.8 kW Operating pressure: 6 bar Air consumption: 20 l/min Extraction nozzles: 2 x 150 + 1 x 120 mm Dimensions: 2690x1800x2100 mm Weight: approx. 3500 kg Note: Machine is not operational (feed belt is missing) Storage location: Flörsheim Availability: by arrangement

Year of construction: 2023, condition: used, Size: 100x3,000 mm, RITTAL control terminal with SIEMENS Simatic HMI Touch touchscreen, workpiece size: 100-1,200 mm wide / 100-8,000 mm long, 2-50 mm thick, swiveling angle 0-75°, extraction system; Compact cartridge filter unit TECAU Dustec 6 XL Iedpex Akl Tefx Ab Iea Serial no.: 1009024-530, Year of manufacture: 2023; Chip collection container KAISER + KRAFT SL0650/BH511A Year of manufacture: 2023, max. load capacity: 2,000 kg, volume: approx. 0.5 m³

Condition: reconditioned (used), Year of construction: 2021, Belt Grinding Machine Manufacturer: REMA Model: BS 75 Column-type Design Year of Manufacture: 2021 – workshop-tested Description: - Flat grinding table usable both horizontally and vertically - Extremely robust and durable machine construction - High-quality components designed for continuous industrial operation - High safety standards with CE certification - Numerous customization options - Simple and quick belt change Iodpsxy Rfhofx Ab Ija Technical data: - Belt dimension: 950 x 100 mm - Motor power: 0.55/0.7 kW - Motor speed: 1,450/2,900 rpm - Cutting speed: 8/16 m/s - Worktable size: 225 x 120 mm - Mitre table size: 110 x 120 mm - Belt guard housing made of steel - Extraction port Ø 75 mm - Dimensions: 380 x 410 x H 1,209 mm - Weight: 70 kg Used as seen, without warranty. The machine is technically in line with the standards of its year of manufacture.

Condition: used, Abrasive belt length 1st unit: 2,150 mm Max. working width: 1,300 mm Isdpexzi S Nsfx Ab Ioa Number of belts: 3 Belt 1st unit: cross belt Design 1st unit: cross belt Sanding pad 1st unit: electronic segmented pad Abrasive belt width 1st unit: 150 x 4,800 mm Drive 1st unit: kW 2nd unit: longitudinal roller Design 2nd unit: steel calibration roller Abrasive belt length 2nd unit: 2,150 mm Abrasive belt width 2nd unit: 1,350 mm Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: pad unit Design 3rd roller: electronic segmented pressure beam SDS system Sanding pad 3rd unit: electronic segmented, 32 mm width Abrasive belt length 3rd unit: 2,150 mm Abrasive belt width 3rd unit: 1,350 mm Suitable for lacquer sanding: yes Belt air blast: yes Vacuum conveyor: yes Feed speed, fixed: stepless 5 – 15 m/min Control: screen control Electrical/pneumatic belt oscillation: electrical Infeed height: variable (lower table moves) Table height adjustment: electric motor Table height display: digital Working height / feed table height: 880 mm Location: Supplier

Condition: good (used), Year of construction: 1988, Working width 1.100 mm Number of sanding units 1 st. Iodjxzuwqepfx Ab Isa Workpiece thickness max. 150 mm sanding belt measurements 1.120 x 1.900 mm Motor roller 15 kW kW Feed speed 2,5 - 12,5 m/min.

Condition: used, total length: 1,100 mm, total width: 3,880 mm, total height: 3,170 mm, - Documentation available: No - CE marking present: Yes - CE certificate present: No - Transport dimensions: 1100mm x 3880mm x 3170mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Iedpjwivp Hjfx Ab Isa Peter Stroomberg

Condition: ready for operation (used), For sale: conveyor belt as seen in the photos, 6 m long. Belt width: 0.65 m (belt is new). Possibility of transport. Isdpfor Nvx Ujx Ab Ija

Condition: good (used), Year of construction: 1999, Refrigeration Dryer Manufacturer: KAESER Model: TE 121 Year of manufacture: 1999 Rated motor power: 2.1 kW Maintenance carried out by Kaeser. Isdpfx Asttwzbsb Ioa

Condition: good (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 220, Dear customers, We are currently offering a very good used vertical band sander for model and mould making from the brand F. Zimmermann. Below are the technical details: Sanding belt width: 250 mm Sanding height: 400 mm Belt length: 2,400 mm Sanding speed: 18 m/s Work table: 750 x 350 mm Table tilt: 30/45° Power: 4.0 kW Speed: 1,400 rpm Extraction port diameter: 120 mm Dimensions: 990 x 850 x 1,740 mm Weight: 470 kg Isdpfxsxy Nrge Ab Ioa Equipment: - Foot emergency stop Price plus VAT; this will be itemised separately on the invoice.

Year of construction: 2002, condition: used, Empty weight: 1.000 kg Iodpfownhp Ajx Ab Isa Price: On request - Year: 2002 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 7068 - Automatic output system present: No - Automatic feed system present: No - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 1996, The subject of my auction is a conveyor belt with a length of 11m and a belt width of 0.6m. Possibility of transport. Ijdpfx Asvylp Ssb Ioa

Condition: used, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! Isdpfxsxb N Tgj Ab Isa - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: ready for operation (used), Year of construction: 1996, The item for sale in my auction is a conveyor belt with a length of 15 m and a belt width of 0.6 m. Possibility of transport. Ijdpfxjv T H R Re Ab Ioa

Condition: used, Wide belt sander SCM Sandya 10S M2 110 Built in 1999 Isdpfx Aownh A Ajb Isa Sanding belt dimensions 2620x1115mm 380V 1st sanding unit Contact roll 180mm Engine 18.5kW 2nd sanding unit Combi aggregate with sanding pad Engine 11kW Sanding width max 1100mm Sanding height Min/max 4/170mm Throughput speed 4.5-9 m/mins Dimensions 2300x2205x2500mm, weight 1850kg - Documentation available: No - CE certificate present: No - Number of units [pcs]: 2 - └ Unit 1: - - Type of unit: Contact roller - - Roller diameter [mm]: 180 - - Motor power [kW]: 18.5 - └ Unit 2: - - Type of unit: Combi - - Sanding belt length [mm]: 2620 - - Sanding belt width [mm]: 1115 - - Motor power [kW]: 11 - Max. working width [mm]: 1100 - Min. working height [mm]: 4 - Max. working height [mm]: 170 - Min. feed speed [m/min]: 4.5 - Max. feed speed [m/min]: 9 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2018, Wide belt sander Boere Sandrite 1100C 380V Maximum sanding width 1100mm Maximum sanding height 150mm Sanding unit COMBI Engine 11kW (15HP) Ijdjwnhwaepfx Ab Iea Transport dimensions:1800x1300x2100mm (LxWxH), Weight 1850kg - Year: 2018 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, operating hours: 27,518 h, BOERE sanding line 'Compact' Elite Year of construction 2002 (CE) Operating hours 27518 Maximum height 150 mm Maximum width 1100 mm Elite BKKS 1100 First generator 30kW engine Second generator 18.5kW engine Third generator 15kW engine Voltage 380V, 128Amp Elite TKKS 1100 First generator 30kW engine Second generator 18.5kW engine Third generator 15kW engine Iodpewng Hmefx Ab Ioa Voltage 380V, 117Amp - Year: 2002 - Documentation available: No - CE certificate present: No - Serial number: - Operating hours: 27518 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2009, total width: 1,970 mm, total height: 2,250 mm, total length: 2,280 mm, Empty weight: 1.650 kg Price: On request - Year: 2009 Isdpfsx Ad H Dex Ab Isa - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 2 - └ Unit 1: - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1320 - - Roller diameter [mm]: 13 - - Roller material: Rubber - - Motor power [kW]: 35 - Min. working width [mm]: 1100 - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Max. feed speed [m/min]: 4 - Voltage [V]: 400 - Current consumption [A]: 69 - Power [kW]: 35.0 - Transport dimensions: 2280mm x 1970mm x 2250mm (l x w x h) - Transport weight [kg]: 1650kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels