Used Benfra 135 B for sale (8,755)

Condition: used, axle configuration: 3 axles, first registration: 08/2007, color: other, Year of construction: 2007, Empty weight: 5.350 kg Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm Gjdpfsw Tatiox Ah Hjil We have the possibility to stack trailers!

Condition: excellent (used), functionality: fully functional, Schaublin 135 High-Precision Lathe with 3-Axis K&C Digital Readout NEW and Accessory Cabinet in Excellent Ex-University Condition! Technical Data: >> Centre height: 135 mm >> Distance between centres: 630 mm >> Swing over bed: 315 mm >> Spindle mount: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric thread pitches: 0.25–14 mm Gijdpfxsx H Szyo Ah Hel >> Tailstock: MT3 >> Infinitely variable speed range: 55–3000 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 3-axis digital readout by K&C (new), 12 months manufacturer’s warranty with user manual Functions: Switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> Accessory cabinet containing: - 160 mm 3-jaw chuck with two sets of jaws - Multifix B toolholder with 3 pockets - Internal and external collets with quick-change system - Change gears - 4-jaw chuck - Face plate - Fixed and travelling steady rests - Coolant system - Centres - Operating manual - And much more About the machine: For sale is a Schaublin 135 high-precision lathe. The machine is in excellent condition, coming from a university and only lightly used. Equipped with a NEW K&C 3-axis digital readout and a comprehensive range of accessories. You are invited to inspect the machine under power on site to verify its condition.

Condition: good (used), End mill, end mill, milling cutter, indexable inserts Godpfx Ahjb A R E Us Hoil -Outer diameter: 50 mm -Teeth: 4 -Weight: 0.5 kg

Condition: good (used), axle configuration: 3 axles, first registration: 04/2016, loading space length: 13,320 mm, loading space width: 2,490 mm, loading space height: 2,590 mm, total length: 14,040 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,980 mm, color: white, Year of construction: 2016, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: BPW EcoPlus Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 8.789 kg Carrying capacity: 32.211 kg GVW: 41.000 kg Functional Gjdpfox Rzu Rox Ah Hsil Make of bodywork: Krone Coolliner Carrier Vector 1950 Cooling engine: diesel and electric (2234 operating hours diesel; 516 electric) Wall thickness: 5 mm Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Gluing Unit for Hot-Melt Adhesive: Single roll/strip magazine for roll material up to 3 mm and strips up to 12 mm End Trimming Unit: 2 motors, each 660 W, pneumatic swiveling 0° + 25° Godpfx Aex D I D Aeh Hoil This IMA Combima/II/390/B/L12 was manufactured in 2010. A robust double-sided edgebander, it features a max feed width of 3,300 mm and handles workpiece thicknesses up to 60 mm. Equipped with ICOS OPEN control for precision, it supports both roll and strip edgebanding materials. Ideal for high-capacity environments requiring flexibility and reliability in edge finishing. Contact us for more information about this machine. Application Types Edge Banding

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips/lippings (Min/max) mm 3 / 10 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 - 50 - Without Transmission bar (Master & Slave system) Distance (center-axes) of the Disappearing Dogs (mm) 1080 SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x kW 8) Free Space (for Milling unit) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 04.1570 + 283.205 Band Pressure zone - Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) speed 30 m/min (0° - 25) Fine Trimming unit 08.055 (2 x Kw 1) / 0° - 30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) with servo-motors Gisdpfed Nt Rqsx Ah Hol Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (4 x Kw 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270°

Condition: used, axle configuration: 3 axles, first registration: 01/2012, color: other, Year of construction: 2012, Empty weight: 7.005 kg Axle 1: left 14 mm right14 mm Axle 2: left 14 mm right 14mm Godpexr Abfjfx Ah Hsil Axle 3: left 14 mm right 14 mm

Condition: excellent (used), functionality: fully functional, Schaublin 135 High Precision Lathe with 3-Axis Digital Readout (ELESTA) and Accessory Cabinet in Excellent University Condition! Technical Data: - Centre Height: 135 mm - Distance Between Centres: 630 mm - Swing Over Bed: 315 mm - Spindle Nose: Camlock D1-4 - Spindle Bore: 40 mm - Longitudinal and Cross Feeds: 0.025–0.35 mm/rev - Metric Threads: 0.25–14 mm - Tailstock Taper: MK3 - Infinitely Variable Speeds: 55–3000 rpm - Total Power Requirement: 4.45 kW - Weight: approx. 1,200 kg Accessories: - 3-Axis Digital Readout (ELESTA) with Heidenhain Scales Giedpfx Ahjx Hivns Hol - Accessory Cabinet including: - 160 mm 3-jaw chuck with 2 sets of jaws - Multifix B, 3 tool holders - Internal and external quick-change collet system - Change gears - Eccentric chuck - Faceplates - Fixed and travelling steadies - Coolant system - Centre points - Operating manual - And much more About the Machine: For sale is a Schaublin 135 high precision lathe. The machine is in very good condition, comes from a university, and has seen very little use. It is equipped with a 3-axis digital readout and a wide range of accessories. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Condition: new, Schleicher UCN2 (B) No. 31309121 120 Master CPU Numerical Control, serial number, unused in opened original packaging, 100% functional, scope of delivery as per photos. Gijdpfx Ahsx Eub Ts Hol

Condition: used, mileage: 1,78,083 km, first registration: 07/2002, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro3, total length: 7,250 mm, total width: 2,350 mm, total height: 3,200 mm, Year of construction: 2002, Number of doors: 2 Unladen weight: 4,980 kg Gjdpfxsxr Ikfo Ah Hjil Price: On request Registration number: BN-DN-14 = Company Information = For further information, you can reach us on weekdays from 8:30 am to 5:00 pm and on Saturday from 10:00 am to 3:00 pm by phone. You can also email us at: See you soon!

Condition: like new (used), Year of construction: 2020, operating hours: 4,848 h, functionality: fully functional, machine/vehicle number: 14750, turning length: 765 mm, turning diameter over cross slide: 680 mm, turning diameter: 552 mm, spindle motor power: 40,000 W, spindle speed (min.): 10 rpm, spindle speed (max.): 4,500 rpm, spindle bore: 77 mm, travel distance X-axis: 305 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 860 mm, rapid traverse X-axis: 18 m/min, rapid traverse Y-axis: 7 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (max.): 4,500 rpm, rotational speed (min.): 10 rpm, type of input current: three-phase, feed length Y-axis: 140 mm, feed length Z-axis: 860 mm, torque: 286 Nm, bar passage: 71 mm, feed rate X-axis: 18 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 24 m/min, chuck outer diameter: 250 mm, Equipment: documentation/manual, rotational speed infinitely variable, We offer this Biglia B.750-YS CNC turning and milling center, year of manufacture 2020, in like-new condition. Gedpox N Edaefx Ah Heil Model: B.750-YS Serial number: 14750 Year of manufacture: 2020 Weight: 7,400 kg Operating hours: 4848 Turret with 16 driven tools, main spindle, sub-spindle, Y-axis, bar feeder preparation, Renishaw tool setter, extractor, chip conveyor, high pressure coolant through driven tools. We are selling it fully equipped with driven tools, soft jaws, and tools as shown in the photos. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings mm 1,3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 266 / 2400 (option 3000) Distance (center-axes) of the Disappearing Dogs (mm) 540 (prepared for 270 mm) Godpfou Ekbnsx Ah Hjil Numerical Control ICOS OPEN Feeding speed (adjustable) max. 60 m/min Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 283.205 Band Pressure zone. Edge coils supporting unit (No. 2 reels) Servo-drive Snipping (end-cutting) unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min) Fine Trimming unit 08.055 (KW 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Spraying Unit (for polishing liquid) Free space (for possible addition of a scraper) Buffing unit 08.617 (Kw 0.18 x 2)

Condition: used, axle configuration: 3 axles, first registration: 03/2011, color: other, Year of construction: 2011, Empty weight: 7.260 kg Axle 1: left10 mm right 10 mm Axle 2: left 10 mm right 6 mm Gedsxr Ambjpfx Ah Hoil Axle 3: left 10 mm right 10 mm

Condition: used, machine/vehicle number: 008266, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 25 m/min Gedjx A Hfiepfx Ah Hjil Operating Units Right Side: 9 nr Operating Units Left Side: 9 nr

Condition: ready for operation (used), Philips 4022 226 3622 LM / LM DRIVE MOD board, E-version: 4 / B, used, in good condition, 100% fully functional, delivery scope as per photos. Giodjx Et Tbjpfx Ah Hjl

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg Giedpfx Ajx Ein Ssh Hsl - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: good (used), Year of construction: 2003, machine/vehicle number: 81913, Offer 25449 Technical Data: - Press force: 135 t - Working width: 3100 mm - Clearance between uprights: 2600 mm Gjdpfx Asx I I Hbjh Hoil - Table width: 180 mm - Throat depth: 250 mm - Installation height: 325 mm - Approach speed: 70 mm/sec - Working speed: 7 mm/sec - Return speed: 60 mm/sec - Ram stroke: 120 mm - Adjustment range of fixed stops: 120 mm - Drive: 400 V / 7.5 kW - Oil filling: approx. 300 l - Space requirement: approx. W 3300 x H 2400 x D 1600 mm - Weight: approx. 7500 kg - Equipped with: - Swing-arm control panel with HACO ATS 560 control - For setting pressing depth + pressing force + backgauge - Motorized backgauge - 4-way universal die + sharp tool - Goose-neck tool incomplete - Two-hand operator panel with foot switch - Support arms

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) max mm 1,0 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins Godpfjwz Ic Ajx Ah Heil SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt glue) 04.1570 Pressure zone Edge coils supporting unit (No. of reels) 2 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Rough Trimming unit 08.0555 (1 x Kw 0,66) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Milling grooving unit: 75.30 (2 x Kw 4,4)

Condition: used, axle configuration: 3 axles, first registration: 03/2011, color: other, Year of construction: 2011, Empty weight: 7.865 kg Godpfjxqxq Hjx Ah Hsil Axle 1: left 8 mm right 8 mm Axle 2: left10 mm right10 mm Axle 3: left 8 mm right 8 mm

Condition: used, mileage: 1,99,999 km, power: 115 kW (156.36 HP), first registration: 06/2012, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 2,700 mm, loading space volume: 20 m³, loading space length: 4,220 mm, loading space width: 2,450 mm, loading space height: 1,900 mm, Year of construction: 2012, Equipment: ABS, soot filter, tail-lift, * Curtain side body, Ewers system * DEKRA certified according to VDI 2700 ff and DIN EN 12642 Code XL * Cargo space dimensions: 4,220 x 2,450 x 1,900 mm * 4 rows of load securing rails * Lashing rings integrated in the outer frame * 1,500 kg Bär tail lift * Rear axle with air suspension * Ball head and eye-type trailer coupling with compressed air brake connection * Differential lock * 3 seats * 6-speed manual transmission * Euro 5, low noise emission --- Special features: 2-line trailer brake system, Ringfeder trailer coupling, 13-pin trailer socket, audio system: Radio Truckline CD 65 / 70 incl. CD drive, rear axle differential lock, alternator 100 A, compressed air operated engine brake, reinforced rear crossmember, cab seats: hydraulically suspended driver's seat, reinforced rear axle stabilizer, reinforced front axle stabilizer. Further equipment: Giedpfxox Ix Hfj Ah Hel EURO 5 emission standard, front axle load 2.5 t, heated exterior mirrors, 74 Ah battery, cab: single cab, suspension: leaf / air, 6-speed gearbox, hydraulic steering, body/chassis: chassis, fuel tank: 90 liters, engine: 4.3 L - 115 kW diesel (OM 904 LA), rear fog lamp, wheelbase 3,700 mm, reversing lights, disc brakes rear axle, disc brakes front axle, cab seats: double passenger seat, permissible gross weight 7.49 t.

Condition: ready for operation (used), Siemens 6FC5203-0AF52-0AA0 Operator Panel Front SN T-U32018414, 12.1" TFT, width: 19", used, in good condition, 100% fully functional, scope of delivery as per photos. Giodpfsx Dxpiex Ah Hjl

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Without Transmission bar (Master & Slave system) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins "Hopper Feeder" (panels fall directly onto the feeding chains) Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Giedpfxeum Unte Ah Hjl Hogging Units (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Pressure zone Edge coils supporting unit (No. of reels) 6 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Fine Trimming unit 08.055 (2 x Kw 0,66) 30 m/min Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x Kw 0,18) Free space

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 + in stips / lippings (max mm 1) Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 (Master & Slave) Safety and sound-proof enclosures/cabins Giedoxggzlepfx Ah Hel SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Max 35 m/min Milling unit (Joint Trimmer) 75.186 (1 x Kw 4,4) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) VTG 3-24 + 283.203 Pressure zone + Edge coils supporting unit (No. 24 reels) Snipping (end-cutting) unit 08.42 / 30 / B (2 x Kw 0,66) 30 m/min (0°-25°) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min OPTIONAL: KFA 30 Profile Scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.604 (Kw 0,25 x 4) No. 2 Grooving units 08.190 (1 x Left-hand + 1 x Right-hand) (Kw 4,5 x 2) swivelling 90°/180°/270°

Condition: excellent (used), DOUBLE-SIDE EDGE BANDER Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 12 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Numerical Control ICOS OPEN Feeding speed (adjustable) m/min 6 - 30 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space Glueing Unit (Hot Melt Glue) 04.1570 Gedpfx Ahjd Rcige Hsil Band Pressure zone Edge coils supporting unit (reels N°) 2 Snipping (end-cutting) unit 08.42 (KW 0.66 x 2) 0°-25° Fine Trimming unit 08.055 (KW 1 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612 Free space (to add a Grooving Milling Unit)

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Loader) Separate electric and command panel Gjdjwbp Nwepfx Ah Heil Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80