Used Benfra 135 B for sale (40,338)

Condition: good (used), Complete control block. Input: 24 VDC Output: 24 VDC Application: Originally from a glass processing machine manufactured by Lisec Width: 615 mm Prjdpfoy I Td Sjx Airec Height: 150 mm Depth: 70 mm Weight: 3.0 kg Condition: good, second-hand

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 16,418 h, load capacity: 7,000 kg, lifting height: 5,500 mm, free lift: 700 mm, fuel type: diesel, mast type: telescopic, construction height: 3,900 mm, fork carriage width: 1,600 mm, fork length: 1,400 mm, empty load weight: 11,800 kg, total length: 5,000 mm, drive type: Diesel, construction width: 2,250 mm, Side loader Load center: 700 ISO class: FEM 4 B Prjdpjz Ifpbofx Airoc Mast type: Telescopic Transmission: Automatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 32x12.1-15 (30%) Rear tire size: 2 x 32x12.1-15 (30%) Battery year of manufacture: 2005 Additional single hydraulic circuit, cabin with heater, dust protection, pivoting fork carriage (hydraulic), table height: 900mm, table width: 1400mm, lighting according to StVZO (German Road Traffic Licensing Regulations), 1 work light at the front.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric winch Equipment: -LED lighting -Electric winch -Aluminum rims Net price: €26,126.05 / Gross price: €31,090.00 Article number: RSB235552100.01 Technical data: • Brand: Brian James • Model: Race Sport • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Interior dimensions (LxWxH): 550 x 210 x 199 cm • Exterior dimensions (LxWxH): 740 x 249 x 254 cm • Loading height of the floor: 52 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,445 kg • Payload: 2,055 kg • Chassis: Low-loader (wheels beside the body) • Tires: 155/70R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Black body made of high-quality, glass fiber reinforced plastic. Lightweight, yet extremely stable • Daylight roof running along the entire length of the trailer • Handling grips at the front and rear • Front door panels on both sides facilitate the securing of the front wheels • Large, two-wing side doors on the left and right, lockable • Lockable rear ramp in full height and width • Rollers in the rear of the vehicle • Rear supports enable safe loading and unloading of the trailer • Interior height 199cm - Loading height at the rear 188cm • Side tower dimensions: XXX cm x XXX cm (WxH) • Lower edge of the side door height inside: XX cm • Perforated steel floor offers high slip resistance and is extremely durable, even under the harshest operating conditions. • Numerous lashing points and a highly load-bearing floor offer flexible lashing options and perfect grip. • Wheel chocks, fully adjustable with a quick-adjustment system. Suitable for lowered vehicles • Perforated steel floor offers high slip resistance and is extremely durable, even under the harshest operating conditions. • Floor storage box, integrated into the loading area, offers the ideal storage option for heavy, bulky objects. Aluminum lids are included. • Electric winch, 12V with wireless remote control, with steel cable and shackle hook. Powered by an on-board battery • Optional additional options, such as a hydraulic tilting function, can be retrofitted at any time. • Central control unit for tilting function. Including a charge level indicator for the on-board battery • Very stable steel frame, welded • Frame completely hot-dip galvanized • Spare wheel with holder mounted • Very stable V-drawbar, REINFORCED • ALKO over-run device and parking brake • Reverse automatic function • Coupling head made of cast steel with integrated high-security lock ALKO • Plastic mudguards • 13-pin connector • LED interior lighting with LED strip • Rear lights • Large, full-LED safety lighting • Side LED reversing lights Prjdoz Ri Eajpfx Airsc • LED work lights at the rear for better visibility when loading and unloading • Integrated rear fog light • Various marker lights at the front, side and rear • Aluminum alloy wheels in anthracite • Heavy-duty support wheel • 5-year chassis warranty • 4 wheel lashing straps for securing over the wheel

Condition: ready for operation (used), Heidenhain 324 955-17 interface board SN: 71 401 350 B, the item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, delivery as per photos. Pedox Ervuspfx Airorc

Condition: used, Year of construction: 2009, machine/vehicle number: 19727, with CNC control, manufactured by HEIDENHAIN, type: ITNC 530, travel ranges: X-axis: 800 mm, Y-axis: 600 mm, Z-axis: 500 mm, with automatic tool changer with 30 tool positions, with coolant system, chip conveyor, manufactured by KNOLL, type: 340 K-1, machine weight: 7000 kg. Pjdpfxs Af Nlxs Airerc

Condition: used, FOR SALE – 4x ABB INDUSTRIAL DRIVE CABINETS Available in stock: 3x ABB ACS800-07-0135-3 – 225 A 1x ABB ACS880-07-0206A-3 – 206 A / 143 kVA ✅ Used, good condition ✅ Complete drive cabinets ✅ For heavy-duty industrial applications ✅ Available immediately 📍 EXW Rotterdam, The Netherlands Available as a complete set or individually. Pedpszz Sbyofx Airsrc SURPLUS – Industrial Solutions ♻️ From Surplus to Second Life

Condition: good (used), Year of construction: 2012, CNC lathe TAKANG TNC-N200DS-B Control: Fanuc 0i-TD Configuration: Twin spindle, inclined bed, 12-station servo turret Swing over bed: Ø 650 mm Max. machining diameter: Ø 490 mm Max. machining length: 510 mm Main spindle nose: A2-6 Main spindle bore: Ø 61 mm Main spindle bar capacity: Ø 51 mm Main spindle bearing (ID): Ø 100 mm Main spindle hydraulic chuck: 8″ Main spindle speed range: 42 – 4,200 rpm Sub spindle nose: A2-5 Sub spindle bore: Ø 56 mm Sub spindle bar capacity: Ø 45 mm Sub spindle hydraulic chuck: 6″ Sub spindle speed range: 60 – 6,000 rpm Sub spindle stroke (E axis): 500 mm Turret: 12 stations, servo X-axis travel: 280 mm Z-axis travel: 560 mm Rapid traverse X / Z: 20 m/min Tool change time: 0.2 sec Tool holder: □ 20 mm Max. boring bar: Ø 32 mm Main spindle motor: Fanuc 18iP, 9 / 11 kW Sub spindle motor: Fanuc 6i, 5.5 / 7.5 kW Hydraulic pump / tank: 1.5 kW / 60 l Coolant pump / tank: 750 W / 100 l Pedpo Agcrgjfx Airerc Machine weight: 7,030 kg Year of manufacture: 2012 (July) Manufacturer: CNC-Takang, Taiwan For more information, please contact us.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 2,130 mm, total height: 1,550 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 5 rpm, overall weight: 14,100 kg, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B1/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 6000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 8,000 kg - maximum workpiece weight between centers + 1 steady: 10,000 kg - maximum workpiece weight between centers + 2 steadies: 11,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power: 27/41 kW - overall dimensions: total length: 8500 mm width: 2130 mm Prjdpfofhk Insx Airjc height: 1550 mm total weight: 14100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 9,420 h, load capacity: 13,500 kg, lifting height: 3,400 mm, fuel type: gas, mast type: simplex, construction height: 2,950 mm, empty load weight: 18,500 kg, total length: 3,500 mm, drive type: Treibgas, construction width: 1,610 mm, Compact forklift – internal combustion engine Load center: 600 Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid/cushion Front tire size: 40x16x30 Rear tire type: Solid/cushion Rear tire size: 840/350-559 Description: In addition to this RMF model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website – sago-online. Lease-to-own and financing options are available at favorable terms. We would also be happy to buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed information about this KSB135G. P.S.: Our forklift workshop specializes in repair, refurbishment, overhaul, and custom construction for forklifts from 8 tons upwards. We will also gladly display your vehicle for consignment sales. Crane arm, extendable – and tiltable. Telescopic arm from 2410-3750mm; the boom arm can be tilted from approximately 30° downwards to 45° upwards. Prodpfez Evu Ajx Airec

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 105 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 3,000 mm, total length: 5,500 mm, total width: 1,800 mm, total height: 1,800 mm, overall weight: 11,400 kg, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B/3M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 3000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 105 mm - maximum workpiece weight between centers: 8000 kg - maximum workpiece weight between centers + 1 steady: 10000 kg - maximum workpiece weight between centers + 2 steadies: 11000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 5500 mm width: 2130 mm height: 1550 mm total weight: 11400 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers Psdpfedy I I Aox Airorc - MULTIFIX quick change tool post

Condition: excellent (used), mileage: 6,60,000 km, power: 375 kW (509.86 HP), first registration: 03/2011, fuel type: diesel, axle configuration: 8x4, wheelbase: 6,000 mm, fuel: diesel, brakes: retarder, color: yellow, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro5, suspension: other, number of seats: 2, total length: 8,870 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,500 kg, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, fog lights, parking heater, retarder, trailer coupling, = Additional Options and Accessories = - Adaptive Cruise Control - Alarm System - Aluminum Fuel Tank - Heated Mirrors - Brake Booster - High Beam Lights - Refrigerator - Air Suspension - Air-Suspended Seats - Radio/CD Player - Rotating Beacon - Sunroof - Sun Visor - Auxiliary Heater - Toolbox - Central Lubrication System - Towing Hitch = Notes = 8x4 semi-trailer tractor unit Euro 5 Retarder Crane: Effer 1355/8S + 6S Fly-Jib 8-stage hydraulic extension Fly-Jib with 6-stage hydraulic extension Prjdpfx As Aghizjirsc Total working height approx. 37 meters Remote control Hydraulic winch CroSStab outrigger system Adjustable fifth wheel coupling Wheelbase 4.60 m Dutch vehicle Main inspection (APK) valid until 30.03.2027 In very good condition! Immediately ready for use 2 units in stock = Additional Information = General Information Year of construction: 2011 License plate: BZ-DJ-13 Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: ZF, 16 gears, manual transmission Axle Configuration Front axle: Max. axle load: 9000 kg; Suspension: Leaf spring suspension Rear axle 1: Max. axle load: 9000 kg; Suspension: Leaf spring suspension Rear axle 2: Max. axle load: 9500 kg; Reduction: External planetary axles; Suspension: Air suspension Rear axle 3: Max. axle load: 9500 kg; Reduction: External planetary axles; Suspension: Air suspension Weights Unladen weight: 29,725 kg Payload: 7,275 kg GVW: 37,000 kg Maintenance, History and Condition APK (Technical Inspection): valid until 03/2027 Technical condition: very good Optical condition: very good Financial Information Price: On request

Condition: ready for operation (used), Trumpf Laser TruMark 3000 marking laser controller, SN: L0131E1357, with 6m power cable and 2 keys, used, in good condition, 100% operational, scope of delivery as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! Podpfxsz Adcrj Airsrc

Condition: ready for operation (used), Siemens 6SL3120-1TE15-0AA4 Single Motor Module Version: B SN:T-FO6013590, used, in good condition, 100% functional, delivery scope as shown in the photos. Pjdsx Euz Hjpfx Airjrc

Condition: excellent (used), functionality: fully functional, power: 110.32 kW (149.99 HP), fuel type: diesel, Year of construction: 2021, operating hours: 172 h, Equipment: air conditioning, all wheel drive, car registration, hydraulics, trailer coupling, BOKI MUNICIPAL VEHICLE 1352T Length x Width x Height – 5070 x 1700 x 2190 mm (excluding mirrors) Wheelbase 2400 mm / 990 mm Tank capacity: Diesel 50 liters, AdBlue 25 liters, Hydraulic oil 50 liters Additional equipment affects unladen weight, payload and dimensions Engine FPT F1C 1152, EU 6C, 110kW (standard) FPT, Type F1C, 2998 cm³, 4-cylinder diesel 110 kW / 150 hp at 3500 rpm. Torque: 320 Nm at 1200 rpm. Emission standard Euro 6C (Stage V in vehicle documents) Permissible total weight 7490 kg Drive system (standard) Hydrostatic drive, ECO-Drive speed optimization Permanent all-wheel drive with self-locking differential High-pressure hydrostatic system (400 bar), max. output torque 500 Nm Steering (standard) Mechanically steered front axle with up to 40° steering angle Left-hand drive Power steering with hydraulic assistance 3rd axle forced steering and liftable Suspension (standard) Parabolic leaf springs with stabilizer Brakes (standard) ABS 6-wheel disc brakes with brake booster and spring-loaded parking brake Incl. 4-channel ABS braking system with anti-slip control Parking brake with optical and acoustic warning Tires 285/65 R16 (standard) Boki equipped with 285/65 R16C tires Frame (standard) With ball coupling system Ø 42 mm, for mounting tipper bodies and other superstructures Paintwork (standard) Cab + engine box: deep orange RAL 2011 Chassis: anthracite gray RAL 7016 Underbody protection Dinitrol (standard) Corrosion protection chassis Dinitrol 4010 Temperature resistant up to 210° resistant to alkaline and acidic influences can be washed off with special cleaner Hydraulic oil HVLPD 46 (standard) Filled with HVLPD 46 Service interval approx. 2000 hours Including the following winter equipment: Kugelmann spreader Duplex 2.5 m³ stainless steel Type SD B180 H80 L270 KH KA VA Stainless steel design (container and sheet metal parts made of stainless steel, glass bead blasted and painted with special paint) color RAL 2011 Dimensions: Hopper width (B): 1800mm Hopper height (H): 800mm Hopper length (L): 2700m Rear overhang (X): 50mm Discharge type: short Control k-tronic 2 Fixed cable harness Terminal box for cable separation Mounting kit Universal, spider for spreading width B105 - B120 Subframe for mounting on the tipper spider, mounted on the spreader Special paint of the spreader RAL 5002 Ultramarine Blue Access ladder A Duplex stainless steel Podpfx Aezf Etweirjrc Foldable with quick-release fastener Platform slip-resistant with handrail, suitable for Duplex spreader Electric spreading pattern adjustment (ESB) from the driver's cab Electric spreading pattern adjustment Standard (ESB) complete Electric servo - adjustment motor to move the spreading pattern position Display and adjustment of the spreading pattern position by means of control panel Hummel Vario - snow plow LF - D 2700mm With support foot, 2 double-acting hydraulic cylinders, 6 hydraulic hoses with couplings and horizontal adjustment Complete with hydraulic lifting and lowering device including Hydraulic cylinder, hoses, couplings and device-side mounting plate (DIN plate) Can be used in a variety of ways as: - side plow (diagonal plow) - wedge-shaped plow - V-shaped plow Paintwork: RAL 5002 Blue Height: approx. 900mm Weight: approx. 500Kg Total width: approx. 2700mm Snow plow - additional lighting consisting of 2 elastically mounted marker lights, holder, cable, plug Rubber - corundum strip 2700mm Changes, typing errors, errors and prior sale are subject to chan

Condition: reconditioned (used), Year of construction: 2026, functionality: fully functional, spindle bore: 105 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, total length: 5,500 mm, total width: 2,130 mm, total height: 1,550 mm, overall weight: 12,300 kg, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B/4M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 4000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 105 mm - maximum workpiece weight between centers: 8000 kg - maximum workpiece weight between centers + 1 steady: 10000 kg - maximum workpiece weight between centers + 2 steadies: 11000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 Prjdpfx Aioflaxvsrjc - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 - engine power: 27/41 kW (1st gear / 2nd gear) - overall dimensions: total length: 6500 mm width: 2130 mm height: 1550 mm total weight: 12300 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: good (used), functionality: fully functional, machine/vehicle number: 10575, Year of construction: 1995, load capacity: 4,500 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: duplex, motor manufacturer: Briggs & Stratton, overall weight: 9,800 kg, empty load weight: 9,800 kg, total height: 3,500 mm, total length: 5,000 mm, total width: 2,700 mm, Equipment: lighting, A very well-maintained side loader is offered for sale. It is in good technical condition and is a truly robust machine. Prjdpfx Aezu Stisiroc

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 5,000 mm, total length: 7,500 mm, total width: 2,130 mm, total height: 1,550 mm, rotational speed (max.): 630 rpm, rotational speed (min.): 5 rpm, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B1/5M universal lathe has been comprehensively rebuilt and modernized and has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. Prsdova Elaspfx Airec The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: 3,5 months, starting from the order Technical data: - distance between centers/turning length: 5000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - Power feed on compound slide for machining tapers, conical parts, 1°- 90°, up to 450 mm - maximum workpiece weight between centers: 8,000 kg - maximum workpiece weight between centers + 1 steady: 10,000 kg - maximum workpiece weight between centers + 2 steadies: 11,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 22/41 (1st gear / 2nd gear) - overall dimensions: total length: 7500 mm width: 2130 mm height: 1550 mm total weight: 13200 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover, chip tanks Additional equipment available for price upgrade: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: excellent (used), Year of construction: 2024, 259 USED Arabic Bread Line, Oven Line: TECHNICAL DATA: - capacity: 3500-9000 pieces/h, - diameter: 15-38 cm, - number of rows: max. 3, - working width: 100 cm. Predszix Amepfx Airsc - year of manufacture: 2024. EQUIPMENT: - divider, - pre-proofer, - rolling, - final proofer, - tunnel oven + 2 burners, - cooling conveyor: 80 m, - stacker (folding and counting devices). The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), mileage: 6,20,000 km, power: 375 kW (509.86 HP), first registration: 03/2011, fuel type: diesel, axle configuration: 8x4, wheelbase: 6,000 mm, fuel: diesel, brakes: retarder, gearing type: mechanical, number of gears: 16, emission class: euro5, suspension: other, number of seats: 2, total length: 8,870 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,500 kg, Equipment: air conditioning, central locking, cruise control, electric window regulation, fog lights, parking heater, retarder, trailer coupling, = Additional Options and Accessories = - Alarm system - Aluminum fuel tank - Heated mirrors - High beam headlights - Refrigerator - Air suspension - Air-suspended seats - Radio/CD player - Rotating beacon - Sunroof - Sun visor - Auxiliary heater - Toolbox - Central lubrication system - Tow hitch = Notes = 8x4 semi-trailer tractor Euro 5 Retarder Crane: Effer 1355/8S + 6S Fly-Jib 8-stage hydraulic extension Fly-Jib with 6-stage hydraulic extension Total working height approx. 37 meters Remote control Hydraulic winch CroSStab outrigger system Adjustable fifth-wheel coupling Wheelbase 4.60 m Dutch vehicle Main inspection (APK) valid until 29.03.2027 In very good condition! Immediately ready for use 2 units in stock = Additional Information = General Information Year of construction: 2011 Registration number: BZ-DJ-12 Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: ZF, 16 gears, manual transmission Axle Configuration Front axle: Max. axle load: 9000 kg; Suspension: Leaf spring suspension Rear axle 1: Max. axle load: 9000 kg; Suspension: Leaf spring suspension Rear axle 2: Max. axle load: 9500 kg; Reduction: External planetary axles; Suspension: Air suspension Rear axle 3: Max. axle load: 9500 kg; Reduction: External planetary axles; Suspension: Air suspension Weights Unladen weight: 29,725 kg Payload: 7,275 kg GVW: 37,000 kg Functional CE marking: yes Maintenance, History, and Condition APK (Technical Main Inspection): valid until 03.2027 Technical condition: very good Optical condition: very good Prodpfe Agntpjx Airec Financial Information Price: On request

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 960 mm Travel range Y-axis: 380 mm Travel range Z-axis: 380 mm Distance from table center to stand: 190–570 mm Rapid traverse: 15 m/min Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Table dimensions: 700 × 360 mm T-slots: 3 × 18 mm T-slot spacing: 110 mm Distance from table to floor: 840 mm Max. table load capacity: 300 kg Spindle mount: ISO 40 Spindle speed: 100–6,000 rpm Ball screw X and Y axis diameter: 32 mm Ball screw X and Y axis pitch: 10 mm Tool positions: 16 Max. tool diameter with occupied auxiliary positions: 85 mm Max. tool diameter with free auxiliary positions: 135 mm (?) Max. tool length: 250 mm Max. tool weight: 6 kg Max. total weight of tools: 60 kg MACHINE DETAILS CNC control: HEIDENHAIN TNC 425 Connected power: 13 kW Pjdpfx Ajz Il E Ajirerc Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg EQUIPMENT 16-position tool changer 3D measuring probe Note: The vise shown in the photos is not included. External reference: Schönichen - Lot 23

Condition: used, Year of construction: 2007, grinding wheel diameter: 400 mm, table load: 800 kg, grinding wheel width: 100 mm, overall weight: 5,700 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, Horizontal Surface Grinding Machine Manufacturer: ABA Z&B Model: ECOLINE 806 E Year of manufacture: 2007 Control system: SIEMENS 840D powerline Technical details: Spindle motor: 11 kW Grinding wheel diameter: 400 mm Grinding wheel width: 100 mm Max. table load: approx. 800 kg Prodpezy Sinofx Airec X-axis: 800 mm Y-axis: 700 mm Z-axis: 600 mm Machine weight approx.: 5,700 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 960 mm Travel range Y-axis: 380 mm Travel range Z-axis: 380 mm Distance from table center to stand: 190–570 mm Rapid traverse: 15 m/min Positional accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Table dimensions: 700 × 360 mm T-slots: 3 × 18 mm T-slot spacing: 110 mm Distance from table to floor: 840 mm Max. table load capacity: 300 kg Spindle mount: ISO 40 Spindle speed: 100–6,000 rpm Ball screw X and Y axis diameter: 32 mm Ball screw X and Y axis pitch: 10 mm Tool positions: 16 Max. tool diameter with occupied auxiliary positions: 85 mm Max. tool diameter with free auxiliary positions: 135 mm (?) Max. tool length: 250 mm Max. tool weight: 6 kg Max. total weight of tools: 60 kg MACHINE DETAILS Prodpjz Il Hasfx Airsc CNC control: HEIDENHAIN TNC 425 Connected load: 13 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg EQUIPMENT 16-position tool changer 3D measuring probe Note: The vise shown in the photos is not included. External reference: Schönichen - Lot 25

Condition: excellent (used), For sale is a lot of Sandvik brand side and face milling cutters and tool holders. Also included are roughing and finishing cutters. Scope of delivery as shown in the pictures. Side and face milling cutters in various sizes up to 300 mm diameter. Sandvik tool holders are included. Among others, the following types: 391.01-50 50 060, 391.10-27, 391.10.63.63.080, 391.42, 391.20. Predpfxsyrnqte Airjc

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 135001, travel distance X-axis: 1,350 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time between September 21st and October 1st! TECHNICAL DETAILS Travel in X-axis: 1,350 mm Travel in Y-axis: 620 mm Travel in Z-axis: 810 mm Feed rate and rapid traverse Feed rate X/Y/Z-axis: 15 m/min Rapid traverse X/Y/Z-axis: 30 m/min Spindle Spindle speed: 12,000 rpm Spindle drive power: 10 kW (100% ED) Spindle drive power: 12 kW (40% ED) Spindle mounting: ISO 40 Spindle bearing diameter (front): 70 mm Spindle bearing diameter (rear): 60 mm Spindle operating hours: 6,510 h Distance from spindle to table: 90 – 900 mm Distance from spindle center to machine frame: 655 mm Tool magazine Tool magazine capacity: 40 Max. tool length: 300 mm Max. tool diameter with occupied neighboring positions: 80 mm Max. tool diameter with free neighboring position: 125 mm Work table Table length: 1,550 mm Table width: 620 mm Number of table slots: 6 Control system Control system manufacturer: HEIDENHAIN Control system model: iTNC 530 MACHINE DETAILS Psdpjzqunusfx Airorc Input voltage: 400 V Input frequency: 50 Hz Input current: 63 A Rated apparent power: 35 kVA Dimensions and weight Overall length: 7,000 mm Overall width: 2,700 mm Overall height: 2,900 mm Machine weight: 8,650 kg EQUIPMENT - Dividing head, 4th and 5th axis, manufacturer WALTER, type TANIH 200 - LANG 5-axis clamping system - RENISHAW measuring probe - Chip conveyor - Documentation and manuals External reference: Wahl - Lot 69 Note: without the machine vice located on the clamping surface.

Condition: ready for operation (used), Siemens 1PH6135-1NF46-0AA0 motor, serial number: EH110037685005, with encoder ERN 1387 2048 SIG/R and 2CW8 366 fan, used, in good condition, 100% functional. Scope of delivery as shown in the photos. NOTE: Please request the costs for packaging and shipping separately! ATTENTION: Please enquire for charges for packing and transport separately!, professionally and completely overhauled and tested, 100% functional, scope of delivery as shown in the photos. Prjdpfjzb T Shsx Airjc