Used Beveler for sale (632)

Condition: used, mileage: 20,553 km, power: 260 kW (353.50 HP), first registration: 09/2023, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, parking heater, Like-new municipal winter service truck: Mercedes-Benz Arocs 2235 4x4 all-wheel drive tipper, 22 t gross vehicle weight, equipped with Meiller three-way tipper body and Meiller winter service hydraulics, front mounting plate, additional winter service lighting, heated windscreen, differential locks on front and rear axles, automatic transmission, automatic climate control, reversing camera and much more. German vehicle, single owner, only 20,553 km, new service performed by Mercedes-Benz in 10/2025. Wheelbase: 3,900 mm Unladen weight: 10,328 kg Payload at 18,000 kg GVW: 7,672 kg Payload at 22,000 kg GVW (winter service): 11,672 kg Weight variant: 20.5 t (9.0/13.0) Permissible gross vehicle weight for winter service: 22,000 kg Increased front axle load for winter service: 10.5 t Front axle: 9.0 t straight; rear axle: bevel gear 300, planetary gears, 13.4 t Front spring: 10.5 t, 3-leaf; rear spring: 13.0 t Meiller winter service hydraulics for plough and spreader Front mounting plate with hydraulic connections Winter service lighting Heated windscreen M-cab ClassicSpace with rear window Additional thermal insulation Engine: OM936, inline-6, 7.7 l, 260 kW (354 hp), 1400 Nm, Euro 6 E Drive: 4x4 Differential locks front and rear axles Axle ratio: i = 4.143 Meiller three-way tipper body, approx. 4.60 m long x 2.42 m wide Bulkhead height: 800 mm Side boards: 600 mm high Prodpfxsxlwngo Abpsa Additional removable aluminium side board extensions +400 mm Lashing eyes in tipper bed floor Automatic transmission G 211-12/14.93-1.0 Mercedes PowerShift 3 Transfer case VG 3000-3W, 1.04, engageable PTO via engine driven output Automatic climate control Auxiliary hot water heater Towing hitch: Maul Ringfeder D40 with air connections Tipper hydraulics connections at rear Towing capacity: 30,000 kg Gross combination weight: 40,000 kg Front and rear axles with leaf springs Front and rear stabilizer Electronic braking system with ABS and ASR High Performance Engine Brake Drum brakes Predictive Powertrain Control Cruise control Engine brake Reversing camera Sun visor 290-litre fuel tank LED daytime running lights LED rear lights Fog lamps 2 rotating beacons on the rear above cab roof Rear work lights Exhaust routed vertically behind cab Electrically adjustable and heated exterior mirrors Electric windows Comfort driver's air-suspension seat Comfort central locking system with remote control Last Mercedes-Benz service performed 10/2025 German vehicle, one owner Top-maintained, like-new condition Net price plus 19% VAT. Attractive financing options available. All information subject to change. Errors and intermediate sale reserved. Internal vehicle number: 2577.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, working range: 12,000 mm, sheet thickness (max.): 300 mm, sheet thickness steel (max.): 300 mm, sheet thickness aluminum (max.): 60 mm, cutting current: 300 A, warranty duration: 24 months, travel distance X-axis: 3,000 mm, travel distance Y-axis: 12,000 mm, travel distance Z-axis: 450 mm, type of cooling: water, One of the most advanced and efficient plasma cutting machines on the market! Thunder 3D is a plasma system capable of cutting and beveling steel plates, pipes, and profiles, as well as open sections such as H, L, C, and T beams. 100% MADE IN POLAND! Travel speed up to 60 m/min! Working area: 3000x12000 mm (other options available from 1500 mm to over 30,000 mm) Compatible with Hypertherm and Kjellberg plasma units. Optional gas torch (propane, acetylene, natural gas). 3D bevel head with a rotation angle of at least: ±93° on the A axis and at least: ±50° on the B axis. Capable of cutting V, A, X, K, Y, and 2Y bevels. Access to Industry 4.0 application. Podpexw Ihhjfx Abpjra For more detailed information, please contact us.

Condition: new, Year of construction: 2026, For sale: versatile Eckert Opal Waterjet cutting system, ideal for processing stone (natural stone, marble, granite), but also suitable for a variety of other materials. Waterjet cutting is performed without thermal impact, enabling precise and clean cutting edges. Perfect for complex contours, inlays, cutouts, or demanding shapes in stone. 🛠 Technical Specifications & Equipment (Manufacturer Data) Working width: 1,000 – 6,000 mm Working length: 1,000 – 12,000 mm Cuttable material thickness (waterjet 2D): 0.5 – 250 mm Cuttable material thickness (waterjet 3D, optional): 0.5 – 150 mm Pedpfx Asx A Tr Nsbpera Positioning speed: up to 25,000 mm/min Positioning accuracy: ± 0.025 mm Design: Gantry construction with closed steel profiles for maximum stability and durability. The cutting tank is statically decoupled and corrosion-protected. Control system: Modern CNC control with touch display (Corning® Gorilla® Glass) – intuitive to operate for efficient workflow. Cutting process: Pure water or abrasive waterjet cutting; optional 5-axis cutting head available for 3D/bevel cutting. Optional additional equipment (if available / to be specified): [e.g. “Pro-X 3D Cutting Head”, “Abrasive Cutting”, “Multiple Cutting Heads (e.g. 2-Head / 4-Head)”, “CAD/CAM Software”, “Water Softening System”, “Scraper Chain Conveyor”, “Wastewater / Filtration Unit”, etc.] 🎯 Ideal for: Stone and natural stone processing businesses, marble or natural stone design workshops. Companies requiring precise, heat-free cuts for contours, inlays, cutouts, or shaped stones. Operations that value clean cutting quality, minimal reworking, and high flexibility in terms of materials. Projects with complex shapes, bevel cuts, or 3D processing – especially with the optional 3D cutting head.

Condition: good (used), Heavy-duty universal carpentry circular saw, carpentry universal circular saw, miter saw, crosscut and miter saw, joinery circular saw -Manufacturer: Schneider Carpentry Machines, CNC joinery circular saw with roller conveyor, laterally movable left/right -Type: SLS 28 -Circuit saw: for crosscuts, miter cuts, bevel cuts, rip cuts, -Circuit saw: for cutting valley rafters, eaves boards, chamfers, and wedge boards -Saw unit: swivels 30°, rotates 180° -Drive motor: 11 kW Predjx Ityyspfx Abpsa -Saw blade: Ø 750 mm -Cutting height: max. 280 mm at 90° -Cutting height: max. 140 mm at 30° -Cutting width: max. 550 mm -Roller conveyors: 5020/750/H970 mm / 2000/750/H970 mm 320 kg -Saw dimensions: 2400/2130/H1600 mm 984 kg -Total weight: 1304 kg

Condition: used, power: 331 kW (450.03 HP), fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: white, driver cabin: day cab, emission class: euro6, Year of construction: 2026, Equipment: AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, differential lock, electric window regulation, electronic stability program (ESP), onboard computer, = Additional Options and Equipment = - Heated mirrors - Leaf suspension - Differential lock - High beam - Air conditioning - Air-suspended seats - Reversing camera = Remarks = Mercedes-Benz Arocs, 5th model generation, 4145, 8x4 EURO 6e, EuromixMTP TMK 18m³ and 20m³ HARDOX TUF 500 Psdsypar Depfx Abpjra - NEW - without registration - Vehicle specifications: Engine OM471, inline 6-cylinder, 12.8 l, (451 HP), 2100 Nm, Euro 6e Transmission G 330-12 / 11.63-0.77, Offroad driving mode, PowerShift 3 automatic Front axle: 7.5 t; Rear axle: bevel gear 300, planetary, 13.4 t Front axle tires: 315/80 R 22.5; Rear axle tires: 315/80 R 22.5 Wheelbase: 4550 mm Cab: M-Cab Classic Space Disc brakes, front and rear axle Fuel tank 290 l, left side, 735 x 700 x 750 mm, aluminum – AdBlue tank 25 l Cab rear wall with window – tinted windshield Light sensor – daytime running lights Roof hatch/roof ventilation flap External sun visor, transparent Multifunction steering wheel Multimedia cockpit Air conditioning Cruise control Vehicle class N3G, off-road vehicle Comfort central locking system Tipper specification: Euromix MTP TMK 18m³ – 20m³ half-pipe tipper (Hardox® 500 Tuf) Semi-circular design CE standard Floor: Hardox® 500 Tuf – 6mm Sides: Hardox® 500 Tuf – 5mm Swinging rear wall Spare wheel holder with lifting winch Aluminum mudguards Versatile lighting options Access steps to the tipping body (access steps: inside the tipping body) EuromixMTP shear tipping stabilizer Accessories: Hydraulically opening tailgate Tarpaulin: manual or electric Chute for asphalt Toolbox Shovel and broom holder Fire extinguisher Work lights Sliding tarpaulin manual or electric, with or without tarpaulin protection roof Foldable underrun protection systems Partial unloading for small areas EUROMIX REAR TIPPER – DURABLE AND ROBUST FOR YOUR OPERATION! For further inquiries, our team is available to assist you in the following languages: We speak German We speak English Nous parlons français Mówimy po polsku Мы говорим по русски Govorimo Srpskohrvatski = Further Information = Year of manufacture: 2026 Front axle 1: steered Front axle 2: steered Gross vehicle weight: 41,000 kg Body brand: EuromixMTP TMK 18m³ – 20m³ Please contact Denis Omeragic for more information.

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Prsdpfxeyh S Aij Abpsa Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: good (used), Year of construction: 2006, voltage 110 - 230 V frequency 50 - 60 Hz Power connection 0,5 kVA weight 150 kg dimensions of the machine ca. 1,0 x 0,8 x 1,75 m Stick blade profile control unit - Control via PC control with Windows XP operating system - Digital drive amplifiers, linear motors and measuring systems - Fully automatic position determination of the cutting edges and axis position of the stick blade - Measurement of almost all single-part and continuous processes required for spiral bevel gears and hypoid gears - Machine concept designed for the shortest set-up and changeover lines and maximum measuring accuracy - Combination probe for measuring tip and surface measurement - Integrated drawer for accessories - Keyboard integrated in flat drawer Psdoymfz Sspfx Abpjra - Operating elements and PC protected against unauthorized access with lockable cabinet element

Condition: new, Punch Grinding and Dressing Device Application: > Grinding of punches: radii, bevels, and shapes (e.g., rectangle, hexagon, elongated hole, etc.) > Dressing of grinding wheels: radii and bevels Base unit: Prism clamping range Ø 4–25 mm Lockable at 24 positions at 15° increments or steplessly fixable Prism adjustable by 38 mm Dimensions: length 216 mm, width 103 mm, height 131.5 mm Weight: 6.8 kg Scope of delivery: Predpoymxxqsfx Abpja Base unit Diamond holder arm for radius grinding Diamond holder for bevel grinding 2 pcs. dressing diamonds Operating manual

Condition: new, maximum load weight: 36,461 kg, overall weight: 49,500 kg, axle configuration: 3 axles, total width: 2,480 mm, total height: 860 mm, Year of construction: 2026, Technical Description Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm thick hardwood flooring. Loading Platform: Loading platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel of approx. 1,000 mm x 8°. 6 pairs of outward-folding lashing rings (LC 5,000 daN). 2 pairs of outward-folding lashing rings (LC 10,000 daN). 1 pair of inward-folding lashing rings on the front central beam (LC 10,000 daN). Grating flooring C40/4 (point load 2.3 t on an area of 20 x 20 cm), over the axles with chequer plate covering. Two-Part Steel Ramps: One pair of galvanized, two-part steel ramps approx. 3,185 + 1,420 x 1,250 mm with grating flooring C40/5 (point load 8 t on an area of 20 x 20 cm). Ramp with hydraulically foldable ramp sections and hydraulic lifting system. Maximum load per pair: 40,000 kg In accordance with regulation 1230/2012/EU, ramps less than 300 mm in length do not count towards the vehicle length of 16,500 mm in driving position. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: Tyres 235/75 R17.5 3PMSF as per manufacturer’s choice. TPMS: TPMS tyre pressure monitoring system as per ECE R 141. Data transmission to the tractor unit via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to receive and display these data. Axles: BPW axles and suspension, 2 fixed axles, 1 self-steering trailing axle. Technical axle load: 12,000 kg Electromagnetic reverse lock, activated via reverse gear and manually. Pjdsw Dl Hwopfx Abpjra Air suspension with raise and lower valve. Axle tools included. Brake System: WABCO braking system compliant with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit. Electrical System: Electrical system compliant with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3). All LED side marker lights flash with the indicator. ASPÖCK-UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets. Connection according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Structure: Steel frame made of high-strength fine-grain steels. Steel grades: – S355J2+N/S355MC (yield strength 355 MPa) – S690QL/S700MC (yield strength 690 MPa) Tarp Structure: Tarp structure approx. 3,960 mm – Galvanized front wall with a tensioning mechanism for the sliding curtains. – “EDSCHA” roof, forward-sliding on aluminum roof rail profiles (bolted to front and rear walls). – 3 pairs of movable stanchions on the loading platform. – Body can be hydraulically widened at the rear by approx. 750 mm to the left and right. – Sliding roof with upward-swinging portal carrier. – Sliding tarp with 700 mm length reserve and tensioning straps at approx. 600 mm intervals. Height to top edge of structure approx. 3,960 mm (loaded). – Driving with open sliding roof is not permitted and will cause damage to the tarp. Painting: Entire steel structure is automatically shot-blasted after welding using a blasting wheel system. Second blasting treatment with corundum for optimal coating adhesion. Full metallizing of the entire chassis with ZINACOR 850 (85% zinc / 15% aluminum) for best corrosion protection. Top coat with 2 layers of 2K finish, single-color in a shade of your choice according to the RAL 841GL standard. Rear section metallized and coated in RAL 9010 (pure white). No metallic paint.

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,000 mm, total width: 600 mm, total height: 1,400 mm, cutting range round steel at 45°: 90 mm, cutting height (max.): 105 mm, saw drive: 4,700 W, empty load weight: 200 kg, COSEN CIRCULAR SAWS MANUAL MC-315 These circular saws are new in the COSEN portfolio, and are available in manual, which means you have to pull the lever down to cut. Technical features: Compact, pedestal-mounted, hand-operated circular saws can be easily handled in the workshop or even on factories. Prodpfx Absv R Dxaopoa Hand-operated vise Heavy duty motor Robust construction Low voltage on/off switch 45° and 90° bevel cutting Two cutting speeds Electric coolant pump with tank COSEN MC-315 CURRENT POWER: 400V DISC DIAMETER: 315 mm MOTOR CAPACITY: 4.7 kW DIMENSIONS: 1000 x 600 x 1400 mm WEIGHT: 200 kg RPM 45/90 RPM MAXIMUM CUTTING CAPACITY ROUND MATERIAL 90°: 105 mm; 45°: 90 mm SQUARE MATERIAL 90°: 85 x 85 mm; 45°: 80 x 80 mm RECTANGULAR MATERIAL 90°: 120 x 60 mm; 45°: 90 x 60 mm Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, Year of construction: 2001, functionality: fully functional, NC rotary table Fibro 10.36.8 with face gear, year 2001 well maintained, very good condition, little used Pitch 120 teeth +/- 1" With hydraulic locking via face gearing, table top does not lift off Rotary table height 380 mm with substructure height 245 mm (total height 625 mm) Predjyg N Hrjpfx Abpoa Table size Ø 1180 mm Top table plate Ø 1300 mm, Table load approx. 5000 kg Table surface smooth, with dirt grooves with Siemens servo drive 1FT6105-8WF71-4EG2 and bevel gearbox Table speed max. 20 rpm with bevel gearboxes itot = 72 Tangential torque with motor operation 7200 Nm Total weight 3.800 kg without fixators, without installation and commissioning

Condition: new, neu ca. 4 Wochen ab Auftragse Polen 7390 € 142.63 € 1 1 14 mm 30 ° 9 U/min 6 - 40 mm 55 mm 100 mm 2600 mm/min 2.2 kW 589 mm 541 mm 320 mm 65 kg bevelling machine designed to mill plates and pipes made of carbon steel, alloy steel, stainless steel or aluminum alloys bevelling of lower edge in inverted position standard shearing cutter for processing stainless/alloyed steel reversible spindle against stuck milling tool STANDARD SET ABM-14 beveller milling cutter for stainless steel cutter extraction tool tube bevelling shaft tube bevelling washer Prjdpfxoyrhn Ss Abpea flat wrenches: 12 - 13 mm, 18 - 19 mm, 24 - 26 mm hex wrenches: 5 / 6 mm user manual

Year of construction: 2021, operating hours: 8,000 h, condition: excellent (used), Real occasion due to automization of the workshop: Edilux 10+6 from 2021 for straight edges from 10 to 100mm thickness with: 10 frontal polishing spindles 3 upper bevelling spindles 3 lower bevelling spindles automatic lubrication 2 roller tables of 2mt. each Prsdpfx Aeyrr Uvjbpoa Very good condition

Condition: good (used), Gearboxes, spur gears, bevel gears, transmission gears, crane gears, hoist gears, grab lifting and closing gears Psdpexb Rppjfx Abpsra -Manufacturer: GfA, Elektromat Type SE 3.5.120-25.00 -Speed: 120/20 rpm see photos nameplate -Motor: Siemens, power 0.37 kW -Shaft: Ø 25 x 100 mm -Protection class: IP 55 -Dimensions: 375/140/H260 mm -Weight: 11.6 kg

Condition: new, maximum load weight: 38,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Podew Tpq Depfx Abpora Excerpt from equipment. Full equipment details available on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized cover over wheel recesses (width approx. 670 mm – max. point load 5 t / pc.) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) Landing legs: - JOST landing legs (manual) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - Tyres 235/75 R17.5 3PMSF, make at our discretion - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transfer to the towing vehicle via standardised EBS interface as per ISO 11992 - For correct display, the towing vehicle must be able to receive and display this data Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lockout activated automatically when reversing and manually - Air suspension with lifting and lowering valve. Axle tools Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without piping to the tractor unit Electrical system: - Electrical system per EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets, according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure automatically shot-blasted after welding in a wheel-blasting system - Second shot-blasting with corundum for optimum coating adhesion - HRM metallization of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, rear section metallized and painted in RAL 9010 Pure White - Metallic finish not available - Paint structure tested in salt spray test according to ISO 9227-NSS - Internal cavities sealed with special wax Including the following accessories: - On the gooseneck and rear, left and right, one holder for warning signs each, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - Galvanized folding supports under the inclination at the rear of the loading area - A hardwood crash protection strip at the rear wall from gooseneck to the loading area - 1 pair of recessed lashing rings along the central beam at the rear inclination (LC 10,000 daN) - Aluminium drop sides and tailgate on the gooseneck

Condition: excellent (used), Ayen drilling units with Festo control system Psdpsw I R Iaofx Abpera 4 drilling units, 1.5 kW, stroke 240 mm. 2 units with bevel gear as sawing units; individual sale possible.

Condition: excellent (used), Year of construction: 2020, PR9000 pallet racking for 42 Euro pallets This pallet racking is tested with a maximum load of 2,200 kg per beam level in accordance with DIN EN 15512 and therefore has a maximum bay load of 9,000 kg and can be loaded with 550 kg per pallet. The push-through protection prevents stored goods from slipping through when shelves are positioned parallel to each other Made of solid, high-quality steel for extreme robustness. Withstands high loads of up to 9,000 kg per bay without any problems High-quality workmanship of the entire pallet rack Plenty of storage space thanks to the 2 levels and 4 bays Eye-catching blue and orange color scheme for maximum safety Upright profile: Height: 5000 mm Material: S-355 JR steel Dimensions: 80 W x 70 D x 1.5 Perforation: 50 mm (grid - offset) Surface: Powder-coated blue Profile structure: Omega profile shape Depth: 1100 mm Manufacture: Cold-rolled profile Pjdpfx Abev Hpz Eopera Bay load: 9000 kg Crossbars: The height of the cross beams can be individually adjusted in 50 mm increments Total load capacity per truss level 1800 mm truss: 2000 kg 2700 mm truss: 3000 kg 3600 mm truss: 2200 kg Material Steel S-235 JR (cold-rolled steel) Profile structure: Rectangular profile Fastening: Hook lugs on each side of the crossbeam for hooking in, secured with locking pin Finish: Powder-coated orange Manufacture: Beveled sheet steel Scope of delivery 05 x PR9000 upright 5 m high / 110 cm deep Bay load: 9,000 kg 12 x PR9000 spreader beam 3600 cm wide incl. safety pins, shelf load: 2200 kg 04 x cross beam PR9000 1800 cm wide incl. safety pins, shelf load: 2000 kg 06 x Push-through protection PR9000 3600 mm 02 x Push-through protection PR9000 1800 mm Year 2020-2022 You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, Year of construction: 2007, with feed unit for molded parts with hot melt glue specification Top condition cleaned, function tested, tested, trial run used, good condition Manufacturer: Artech-Biesse Type: Single Year of manufacture: 2007 Machine no.: 91009 CE type tested with automatic edge trimming, round edge banding tilt-adjustable worktable – for bevel edge banding Pjdpfx Ajvwgizsbpera extendable table extension with roller support feed system – steplessly adjustable edge thickness 0.4 - 3.0 mm workpiece height min. 10, max. 120 mm required space approx. 1400 mm x 1000 mm x 1600 mm weight approx. 320 kg total connected load 5.2 kW Location 97447 Gerolzhofen, free loaded, unpacked Transfer in as-inspected condition, without warranty or guarantee.

Condition: good (used), Gearbox, bevel gear, worm gear -Gearbox: Worm gear Ratio: i = 16 -Shafts: Ø 7 x 25 mm / Ø 10 x 35 mm -Dimensions: 100/107/H96 mm Podpfet Snxpox Abpora -Weight: 0.7 kg

Condition: excellent (used), Geared motor, electric motor, electric geared motor, worm geared motor, bevel geared motor, bevel geared motor -Condition: unused -Manufacturer: SEW-Eurodrive, bevel gearmotor with brake -Type: K77 DRE132MC4BE11/TF -Translation: i= 7.24 -Speed: 203 rpm -Power: 7.5 kW -Protection class: IP55 -Shaft: Ø 50 x 100 mm on both sides Prsdpfx Abet Ult Ajpsa -Brake: 55 Nm -Number: 1x motor available -Price: per piece -Dimensions: 860/410/H290 mm -Weight: 132 kg/piece

Condition: good (used), Year of construction: 1992, Mini tine cutter Hirsch type LQP 180 used For sawing For mini tines For countering For slotting Wood thickness min/max 50/80 mm Angle adjustment range +70/-70 degrees For cross processing of mini-joints and counter profiles. Changeover to +70/-70 degree bevel Length measurement at the stop, Wood clamping with bridge 8 bar Manual feed of the saw and milling carriage, safety circuit, electric brake system Wood thickness max. 80 mm Wood thickness min. 10 mm Profile depth max. 50 mm Saw unit: Three-phase motor 2.2 kW Spindle speed 2800 rpm. horizontal adjustment 50 mm Predpfoumk Dkex Abpja Milling unit: Three-phase motor 4 kW Spindle speed 6000 rpm. Spindle length 100 mm usable Spindle diameter 40 mm Tool diameter 180 mm Weight 850 kg Dimensions 1600 x 1450 mm

Condition: good (used), Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Nord, gear motor -Type: SK 4282AZ-132 S/4 i = 9.23 -Speed: 158 rpm -Engine: Nord Type SK 132 S/4 -Power: 5.5 kW / 1450 rpm -Hollow shaft: Ø 50 x 195 mm -Protection class: IP55 -Dimensions: 630/320/H450mm Psdpst E D Hpefx Abpera -Weight: 104 kg

Condition: good (used), flat gear motor, geared motor, electric motor, electric geared motor, bevel geared motor -Manufacturer: Nord, gear motor -Type: 1SU63A-80 L/4 i = 18.50 Predpfst E D Hvox Abpoa -Speed: 76 rpm -Engine: Nord Type SK 132 M/40 -Power: 9.2 kW / 1450 rpm -Voltage: 400/690 V -Hollow shaft: Ø 50 x 195 mm -Protection class: IP55 -Dimensions: 620/320/H465 mm -Weight: 125 kg

Condition: used, Synchronous servo motor with holding brake and gearbox, gear motor, electric motor, bevel gearbox motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-4-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8015 Machine type: Permanent magnet synchronous servo motor Intermediate circuit voltage of the controller Uzk: 560 VDC Rated power: 12.13 kW Rated speed: 3000 rpm Rated torque Mn: 38.6 Nm Stall torque M0: 61.5 Nm Rated current In: 26.6 A Stall current I0 / I0max: 41 / 164 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length: 50 mm - Shaft end with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver, 1 pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection, 8-pole connection box - Resolver connection, 12-pole connection box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order No.: 717173 Art. No.: 228-00043 Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 160 Nm Bevel gearbox WESTFALIA Systemtechnik Shaft end output: Ø 60 mm with key Shaft end length: approx. 120 mm Gearbox output speed: max 450 rpm Gearbox input speed: max 4500 rpm Gear ratio: 10:1 - Gearbox can be mounted on two flange surfaces - Mounting hole on the gearbox 180 x 180 mm / 180 x 230 mm - Gearbox with triple chain sprocket, outer diameter: 147 mm, number of teeth: 17 Overall dimensions L x W x H: 1020 x 250 x 350 mm Prodpfx Absf Dlzqspoa Total weight: 175 kg good condition 2 units available, price per unit.

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling Podpfx Abod R U Acspora unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, chain feed, double roller top pressure, extendable work piece support and signal lamp for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0 mm and of 8 – 50 mm work piece thickness. Speed: 7,0 m/min. • 2 spaces for finishing units • 7,0“ Colour Touch screen →Automatic edge feeding for material over turntable D=600 mm →Infeed lineal (400mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Rotatable control panel with 7,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights →Optional : Riepe non-stick spray station and Riepe cleaning spray station Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 67641340eaae3