Used Bima for sale (100)

Condition: ready for operation (used), Heidenhain UVR 140D ID: 728 253-01 SN: 39240185B – complete with test report, professionally overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Dsdpjzhqt Iofx Aptowb Please note: In the exchange process, your defective exchange part must not show any mechanical damage, such as fractures, as these can no longer be repaired. In this case, an additional charge of €600 including VAT will be applied. Attention: You are bidding on a Heidenhain inverter, model UVR 140D, ID: 728 253-01, SN: 39240185B, offered as an exchange service. It has been professionally and completely overhauled and tested and comes with a 3-month warranty. The scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €600 including VAT will be issued.

Condition: excellent (used), functionality: fully functional, !!!DEMO MACHINE!!! For sale is a used Felder combination machine CF5-31 with a maximum thickness of up to 230 mm. The machine is in very good condition and has been refurbished and inspected by our qualified personnel. (fully functional) Technical data: - Planing and thicknessing width 310 mm - 4-knife cutterblock (reversible knives) - Thickness capacity 4-230 mm - Folding planing table - Adjustable planing fence 90-45° - Tilting circular saw and router 90-45° - Sliding table 1300 mm - Miter fence 1300 mm - 4 router speeds 3000/6000/8000/10000 rpm - Router fence 230 mm - 3 motors, each 5.5 hp (4 kW), 400 volts - Machine No. 440.10.242.17 The combination machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planer, thicknesser, thickness, Felder, router, routing machine, circular saw, saw Dwodezliiiepfx Aptsb Reference: R-D1618

Condition: new, Attachment suited for: Hoisting equipment Selling price: € 1.000, US$ 1.056 Dwsdpfx Aopa Rtuoptjb Price is representative. For detailed information, please contact us.

Condition: ready for operation (used), You are bidding on a Heidenhain UM 116D Inverter, model 667 945-01, SN: 59397457B, offered through an exchange service. The unit is professionally and completely overhauled, thoroughly tested, and comes with a 3-month warranty. It is 100% functional, with the scope of delivery as shown in the photos. Important: In the exchange procedure, your defective return unit must not have any mechanical damage such as cracks or breaks, as these cannot be repaired. In the event of such damage, an additional charge of €1,000 incl. VAT will apply. Dwedpfx Apsx Etfwotjb

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UV 140, type 335 009-01, SN: 8657728B, offered under an exchange service. The unit is professionally overhauled and fully tested, supplied with a 6-month warranty and guaranteed 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective return unit must not have any mechanical damage such as breakage, as these cannot be repaired. In such cases, an additional charge of €500 incl. VAT applies. Dwjdpfox Etmzjx Aptob Attention: You are bidding on a Heidenhain Inverter UV 140, 335 009-01, SN: 8657728B in exchange (Exchange service), professionally fully overhauled and tested, with a 6-month warranty, 100% functional. Scope of delivery as per photos. Please note: In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage such as fractures, as these are irreparable. In such a case, an additional invoice for €500 incl. VAT will be issued.

Condition: ready for operation (used), Heidenhain UV 130 ID: 324 998-03 SN: 13939866B – including test protocol, professionally fully overhauled and tested with 3 months warranty, 100% functional, scope of delivery as shown in photos. Please note: In the exchange process, your defective exchange part must not exhibit any mechanical damages such as fractures, as these are beyond repair. In such cases, a subsequent charge of €500 incl. VAT will be applied. Attention: You are bidding on an inverter from Heidenhain UV 130 ID: 324 998-03 SN: 13939866B on an exchange basis (exchange service), professionally fully overhauled and tested with 3 months warranty, 100% functional, scope of delivery as per photos. In both repair and exchange procedures, your defective exchange part must not show any mechanical damage such as breakages, as these are no longer repairable. In this case, a surcharge of €500 incl. VAT will apply. Dedpsy Nrm Ujfx Aptjwb

Condition: new, Year of construction: 2024, Tube and Flat-Bed Laser 4 kW | Combination Unit HD-F 3015 BH Laser Combination Machine Machine Dimensions: • (L x W x H) 9,350 mm x 3,800 mm x 2,300 mm, length including filter 5,300 mm. Technical Details: • Max. sheet size: 3,048 x 1,524 mm • Max. sheet weight: 200 kg/m² • Laser power (IPG): 4 kW • Z-axis travel: 125 mm • Max. synchronous speed (X-Y): 141 m/min • Max. acceleration (X-Y): 10 m/s² • Positioning accuracy: ±0.05 mm • Repeatability: ±0.05 mm Cutting Range: • Steel: 20 mm • Stainless steel: 10 mm • Aluminum (AlMg3): 12 mm • Brass: 10 mm • Copper: 6 mm Dedpfxsfl T T Ne Aptjwb Equipment: IPG 4000W fiber laser source (including cooler) Compact dust extraction (filter) for 4 kW Air conditioning unit in the control cabinet Flat-bed laser with automatic exchange table Laser cutting monitoring Automatic laser head positioning CE - exchange table with light curtain safety system Control system SIEMENS SINUMERIK 840D Auto-focusing Precitec Procutter cutting head F150 focus Flat-bed laser with exchange table (automatic pallet change system) Tube cutting device, side mounting, max. Ø400 mm Sheet metal inspection (automatic sheet metal position and size measurement system) Positioning laser diode Automatic nozzle cleaning Central lubrication Motorized chip conveyor Simple user interface, parameter page (power, speed, pressure) Software: Lantek or Metalix CAD/CAM software with automatic nesting Lighting for the work area Multi-chamber extraction system Warning light Special laser cutting options Positioning laser diode Piercing line (piercing settings) Focus line Plasma line Fast line Fly line Training support for CAD/CAM programming Application training Remote maintenance, by connecting to the machine, at no additional cost

Condition: good (used), Year of construction: 1998, functionality: fully functional, Stefani Ibimatic Double Edge Bander Year 1998 S/N NH 002993 Manufacture StefaniS.p.A. Italy Edge banding min / max 14-65mm Thickness min 0,3mm Max size of ABS 3 x 35mm Panel thickness min/ max 60mm Panel size 220- 3200mm Working edge 30-75mm Distance between the edges 400mm Adjustable feed speed from 6 to 36 m/min Units: 1+1 front milling units, 4 kW, pneumatic 1+1 air blast for cleaning the workpieces Dwedpfjtrgy Njx Aptsb 1+1 gluing station / hot melt adhesive unit GR_HMP-P HM-P GLUING UNIT FOR STRAIGHT EDGES The device is designed for gluing straight edges using a thermo-meltable adhesive with a removable container container and a premelter for quick melting The unit includes A Glue container B Strip storage table C Pneumatic device box D Support base for strip storage E Guillotine shears F Side pusher G Inclination of the glue unit H Mobile table top 1+1 feeding device for edge trims, 5 stations 1+1 head cutting unit, 0.35 kW, 12,000 rpm 1+1 equalizing unit, 1 kW, 12,000 rpm 1+1 chamfer trimming unit, 0.5 kW, 12,000 rpm R14/R25, diameter 80 mm, 12,000 rpm 1+1 head rounding unit with two 0.35 kW motors 1+1 milling unit, 4 kW, right side, left side empty space ( U28+U55), diameter 125mm- RPM 12,000 1+1 Self-adjusting scraper RCA 95 1+1 Brush / buffing unit 0,29 kW, 1500 rpm SPO ( 150/50x 50mm ) 1+1 ABS strip color brightener, 1600 W

Condition: used, x-travel 6500/13150 mm y-travel 4000 mm z-travel 1250 mm w-travel 2250 mm control Sinumerik 840 D table surface area 5500/12150 x 3000 mm Dwodjwa Dx Rspfx Aptjb distance between columns 3500 mm max. distance between table and spindle-nose 3000 mm max. workpiece weight 70000 / 105000 kg ram head dimension 480 x 510 mm spindle turning speed - stepless 6,3 - 4000 U/min milling spindle motor 63 kW max. torque on the spindle 3300 Nm tool taper DIN 39871 AD ISO 50 feed speeds X/Y/Z= 24000 mm/min total power requirement 120 kVA weight of the machine ca. 245 t dimensions of the machine ca. 29 x 7,7 x 8,1 m The Machine is in almost new condition - in 2020, it was completely retrofit and modernized for 1.6 million Euro! Equipment/accessories: - automatic tool magazine for 153 tools - automatic milling head magazine for 6 milling heads - machining modules/ milling heads: 1. machining module -straight - straight long - 2. machining module -standard angle - 4000 rpm, 144 x 2.5°, ISO 50 3. machining module -narrow angle extended -40 kW, 4000 rpm, 1800 Nm, 144 x 2.5°, ISO 50 4. machining module -universal index - 40 kW, 4000 rpm, 2100 Nm, - C-axis 144 x 2.5° , B-axis +/- 44 x 2.5°, ISO 50 - coolant unit - chip conveyor - technical documentation

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, workpiece height (max.): 60 mm, workpiece width (max.): 2,800 mm, edge thickness (max.): 20 mm, controller model: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hot melt adhesive tank, pre-press for hot melt adhesive Edge bonding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sanding machine (1 motor) Unit 7: Belt sanding machine (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed tracks: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking Dodpfx Apoyttrxotjwb The machine is sold and delivered in its actual and legal condition ('as seen and approved') on the basis of photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination location. External reference: 6561

Condition: reconditioned (used), Shrinking tunnel / film wrapper Make: Kallfass Type: Semi/automatic shrinking tunnel Model: Combimatic 600 Frame: Painted steel Range: Max. package width x length x height = 600 x 380 x 400 mm Capacity: Max. 600 packs/min Dimensions: Length x width x height = 4,200 x 1,550 x 2,000 mm Weight: 850 kg Dedpfx Aog D Nyhsptewb Power supply: 380 Volt – 50Hz – 23.5 kW Features: Mobile Water-cooled sealing bar Automatic / semi-automatic 2 hand controls Remark: Excellent condition

Condition: used, This listing is for a IBICO Ibimaster 300 Multifunctional Comb Binding Machine The unit is in full working condition and is ready for immediate release. Specifications & Features It’s a multi‑functional binding machine that can both punch and bind documents. Canterbury Used Office Furniture Punching capacity: 21‑hole: ~ 20 sheets of 80 gsm paper at once 4‑hole (for e.g. 4‑hole filing): up to ~ 30 sheets Binding capacity: Up to ~ 500 sheets (80 gsm) using a 51 mm plastic comb Maximum punching width: ~ 315 mm (fits A4 / A5 width) Dimensions & weight (from used listing): ~ 425 × 125 × 425 mm, weight ~ 10.8 kg It supports simultaneous punching and binding thanks to its combined design Djdpfxsxv Acks Aptowb

Condition: used, functionality: unexamined, Ferwood Code: RU0011394 - Manufacturer Code: 10.F4.C3D-4M00 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC - EDGE BANDING MACHINE IMA COMBIMA - IMA BIMA - HOMAG - WEEKE - If interested we offer an overhaul service, contact us. Dwedpfxov I Ahbe Apteb

Condition: used, functionality: fully functional, Manufacturer Code: 401110 - Condition: Used - Functionality: Fully operational - Compatible Machine: CNC IMA BIMA - If interested, we offer overhaul service, please contact us. Weight and dimensions for transport: 4KG 36X26X21 CM Dedovu A A Sopfx Aptjwb

Condition: used, functionality: fully functional, Ferwood Code: AGG0085 - Manufacturer Code: 4970445 - Condition: Used - Functionality: Fully operational - Compatible Machine: CNC IMA BIMA - If interested, we offer an overhaul service, please contact us. Transport weight and dimensions: 6KG, 36X26X21 CM Dsdpfxevu A Ino Aptowb

Condition: used, functionality: unexamined, Ferwood Code: RU0000078 - Manufacturer Code: 5816 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC IMA BIMA - HOMAG BAZ - HOMAG BOF - WEEKE VENTURE - WEEKE BHC - WEEKE BHP/BP - If interested we offer a revision service, contact us. Djdpfev Azgfex Aptjwb

Condition: used, functionality: fully functional, Ferwood Code: AGG0010 - Manufacturer Code: 4-15134 - Condition: Used - Functionality: Fully functional - Compatible machine: CNC IMA BIMA - If interested, we offer an overhaul service, please contact us. Transport weight and dimensions: 8kg, 36x26x21 cm Dwjdpfx Apevu Afyoteb

Condition: used, functionality: unexamined, Ferwood Code: RU0009414 - Manufacturer Code: 10.S4.D30-347M - Condition: Used - Functionality: Not tested - Compatible Machine: CNC - EDGE BANDING MACHINE IMA COMBIMA - IMA BIMA - HOMAG - WEEKE - If interested we offer an overhaul service, contact us. Dwjdpjv Hzu Refx Aptjb

Condition: used, functionality: unexamined, Ferwood Code: RU0010842 - Manufacturer Code: 3TK2807-0AL2 - Condition: Used - Functionality: Not tested - Compatible Machine: EDGE BANDING MACHINE - CNC IMA COMBIMA - IMA BIMA - If interested we offer an overhaul service, contact us. Dedpfxev I Abhe Aptjwb

Condition: used, functionality: unexamined, Ferwood Code: RU0009418 - Manufacturer Code: 10.S4.D31-347M - Condition: Used - Functionality: Not tested - Compatible Machine: CNC - EDGE BANDING MACHINE IMA COMBIMA - IMA BIMA - HOMAG - WEEKE - If interested we offer an overhaul service, contact us. Dwodpfxjv Hzvhs Aptob

Condition: used, functionality: unexamined, Ferwood Code: RU0010841 - Manufacturer Code: 6ES5955-3LC42 - Condition: Used - Functionality: Not tested - Compatible Machine: EDGE BANDING MACHINE - CNC IMA COMBIMA - IMA BIMA - If interested we offer an overhaul service, contact us. Dodpev I Abbsfx Aptewb

Condition: used, functionality: unexamined, Ferwood Code: RU0010843 - Manufacturer Code: 3TK2907-0AL2 - Condition: Used - Functionality: Not tested - Compatible Machine: EDGE BANDER - CNC - PANEL SAW IMA COMBIMA - IMA NOVIMAT - IMA BIMA - HOMAG - WEEKE - If interested we offer an overhaul service, contact us. Dwsdpfx Apev I Abzstsb

Condition: used, functionality: unexamined, Ferwood Code: RU0002725 - Manufacturer Code: 10.F4.C1D-4M00 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC - EDGE BANDING MACHINE IMA COMBIMA - IMA BIMA - HOMAG - WEEKE - If interested we offer an overhaul service, contact us. Dwjdpfxewnn T Ue Aptob

Condition: used, functionality: fully functional, Ferwood Code: AGG0115 - Manufacturer Code: 612597021 - Condition: Used - Functionality: Fully operational - Compatible machine: CNC IMA BIMA - If interested, we offer an overhaul service, please contact us. Weight and transport dimensions: 6 kg 36x26x21 cm Djdevu A Tkepfx Aptswb

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 20787, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, IMA BIMA 410 V 140/600 – Professional CNC Woodworking Machining Centre. The machine features a gantry construction and is designed for the production of furniture, stairs, and special components. The large Z-axis travel (600 mm) enables machining of high workpieces. It is equipped with a 7.5–11 kW spindle, automatic tool changer, vertical and horizontal drilling heads, and a vacuum table with consoles. Controlled by IMA WOP. Manufacturer: IMA (Germany) Model: BIMA 410 V 140/600 Type: CNC Machining Centre for Wood (point-to-point) 🧩 Working Area • X-axis: up to approx. 6000 mm • Y-axis: approx. 1400 mm • Z-axis: version 140 / 600 mm (high Z-axis – large clearance) • Number of axes: 3–5 (depending on configuration and head) ⚙️ Main Spindle • Power: 7.5 – 11 kW • Speed: 1,500 – 24,000 rpm • Tool holder: HSK F63 • Max. tool diameter: approx. 100–150 mm • Max. tool length: approx. 150 mm • Max. tool weight: approx. 6 kg 🔧 Tool Magazine • Automatic tool changer • Number of positions: 18 🪚 Working Units (typical) • Vertical drilling heads: up to 21 spindles • Horizontal (cross) drilling heads • Special aggregates (optional): • Lock case routing units • Grooving saw • Blum/Lamello hardware aggregates • Angular aggregates 🧲 Worktable • Pod & rail vacuum table (consoles) • Approx. 8 working consoles • Vacuum pumps: 2 units (approx. 100–140 m³/h) Djdpfx Ajyky Hdjptowb ⚡ Drives and Feed Rates • Rapid traverse: • X: up to approx. 100 m/min • Y: up to approx. 80 m/min • Z: up to approx. 25 m/min 💻 Control • CNC: IMA WOP / IMAWOP (optionally Siemens / Beckhoff) ⚙️ Installed Power • Total connected load: approx. 23 kW 📏 Machine Weight • approx. 6,500 – 8,500 kg (depending on configuration)