Used Bolt Cutters for sale (4,522)

Condition: good (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and separating waste sheets - as is - System equipped with a high-performance sheet feeder for automatic NON-STOP operation ⦁ For fully automatic punching, scoring, and embossing with or without gripper edges ⦁ For removing the inner waste as well as the side and rear sheet edges ⦁ For stacking the punched and removed sheets with the attached gripper edges, or ⦁ For separating the gripper edges and subsequently stacking the remaining sheets ⦁ With a patented gripper carriage register system for maximum registration accuracy ⦁ With a package stacking machine that enables fully automatic feeder operation and NON-STOP stacking, and does not need to be reconfigured even for the smallest cut sizes. (Rotary table with comb structure) ⦁ Separator magazine with electric stock control, can be refilled during production ⦁ With centerline equipment ⦁ With automatic pallet changing device in the stacker Bwjdpfxez H Smwj Afgjw Specification Sheet format max. 760 x 1060 mm Sheet format min. 350 x 400 mm Maximum punching force 3.3 MN (330t) Speed 9,000 sheets/h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet curvature 4 %) Machine configuration Feeder • Fully automatic non-stop feeder with logistics for processing Euro pallets, system pallets and disposable pallets • Preset function for W4 feeder • Automatic format adjustment of the suction head • Automatic stack side limitation in the feeder System • Dyset Pro bar system • Lateral sheet alignment based on registration marks or sheet edge, max. ±10 mm • Optical side mark Punching station • Vacuum punching plate for the use of 1 mm punching plates • Pneumatic closing frame with quick-release function • Motorized punching plate fine adjustment via touchscreen, adjustment range ±1.5 mm • Motorized punching pressure adjustment Waste removal • Quick-release frame for fixed tools • Sheet guiding device • Integrated quick-release system with fine adjustment for accommodating waste removal frames with fixed tools Stacker • Quick-release frame for fixed tools • Brake brush stacker • Integrated quick-release system with fine adjustment for accommodating separating frames with fixed tools

Condition: excellent (used), Year of construction: 2008, KRAUSS MAFFEI KM 1000-4300 MX *General* Year of manufacture: 2008 Bodpfx Afoz Eu Uuogjww Control: MC5 Clamping force: 11,000 kN Quick mould change: bolt holes *Clamping unit* Mould height min/max: 600 / 1,200 mm Platen size (H x V): 2,210 x 1,910 mm Tie bar distance (H x V): 1,550 x 1,250 mm Opening stroke: 2,000 mm Ejector stroke: 300 mm Locating ring FP/MP: Ø250 / Ø250 mm Max. mould weight FP/MP/total: 25 t / 25 t / 50 t *Injection unit 1 (main)* Screw diameter: 80 mm L/D ratio: 23 Shot volume: 1,810 cm³ Injection rate: 503 cm³/s Max. hydraulic pressure: 190 bar Max. injection pressure: 2,328 bar Screw stroke: 354 mm *Injection unit 2 (2K)* Screw diameter: 40 mm L/D ratio: 20 Shot volume: 204 cm³ Injection rate: 161 cm³/s Max. injection pressure: 1,860 bar Screw stroke: 160 mm *Peripherals* Core pulls FP/MP: 2 / 2 Sequential valve gate control: 16 zones Hot runner zones: 48

Condition: used, functionality: fully functional, Year of construction: 2003, ALLOY CUTTING MACHINE, used AUTOMATIC, IMET VELOX 350 AF-E. FULLY OVERHAULED Bwodpfjzh Ugfox Afgjw

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Kilia 325 Liter Cutter 5000 Express – Factory overhauled 2025 Powerful high-performance cutter system with extensive general overhaul – ready for continuous use in professional food processing Top Features & Highlights: Overhauled in 2025 – numerous main components newly installed: Vacuum pump Base plate Main motor & plate motor Knife shaft incl. bearing Electronic control incl. new control cabinet (stainless steel) Frequency converter Hydraulic cylinder & unit Ejector motor & bearing Feeder motor & bearing Electronic control panel with 10-inch touch panel & joysticks All scrapers Technical equipment: Robust stainless steel design (machine & bowl) High-performance knife shaft drive, infinitely variable from 50–4000 rpm, with reverse (50–500 rpm) Knife shaft drive power: 81 kW, bowl: 3 kW (400 V, 50 Hz) Hydraulically operated noise protection cover (double-walled, stainless steel) Fully automatic ejector (hydraulic) Bodpfjyk Tuuex Afgoww Maintenance-free knife shaft system Automatic central lubrication (ADS 100) Knife shaft brake (electric) 6-knife set Knecht K24 Thermometer & tachometer with end shut-off (electronic) Hydraulic knife tension nut Loading system for 200-liter trolleys (hydraulic) Vacuum function for highest product quality Integrated maintenance and inspection module Remote diagnosis via encrypted internet connection (broadband required) Separate stainless steel control cabinet (wall-mountable) Manual or automatic water addition

Year of construction: 2008, operating hours: 2,893 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0390062, Equipment: CE marking, YAWA MW1050 YA – High-Quality Machine in Very Good Condition YAWA MW1050 YA in very good condition, available for sale. This YAWA MW1050 YA has been well maintained and carefully operated throughout its service life. The machine has only been used for a few hours per day on average, making it an attractive opportunity for a buyer looking for a well-preserved and reliable machine. The machine is in very good overall condition and is ready for continued production. It has been operated in a professional production environment and has received regular maintenance and care. Machine highlights: Manufacturer: YAWA Model: MW1050 YA Very good overall condition Well maintained Only used a few hours per day on average Carefully operated Bwjdpfxsz Hkm Ns Afgow Ready for immediate continued production Inspection possible by appointment This is an excellent opportunity to acquire a well-maintained YAWA MW1050 YA with relatively low usage and in very good working condition. Further technical specifications, photographs and additional information are available upon request.

Condition: good (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 1137.05, Used tool grinding machine Bodpfx Aswzk R Njfgoww Manufacturer: KAPP Model: AST305B Year of manufacture: 1979 Serial number: 1137.05 With accessories

Condition: excellent (used), Year of construction: 1979, Deckel FP2 Aktiv tool milling machine with 3-axis Heidenhain TNC 111 Aktiv digital readout. The machine is in very good condition and comes from a state training department. Fixed table, SK 40 spindle taper. Accessories: various collets and arbor holders, tailstock. Very good, ready-to-operate condition. Can be demonstrated under power by arrangement. Bedpfx Aoxyhmvsfgjww

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Inline Cutter/Emulsifier Brand: Inotec GmbH Model: I175CDI-75 Bwjdpfswxza Nex Afgow Machine number: 103-00605 Year of manufacture: 2007 Voltage: 230/400 V, 50 Hz, 152 A Power: 91 kW, 106 kVA Dimensions: 2000 mm x 900 mm x 850 mm With distribution cabinet Dimensions: 1200 mm x 600 mm x 2100 mm

Condition: ready for operation (used), Year of construction: 2020, Garbin FIBER 630 E – Fiber Optic Cable Installation Machine For sale is a Garbin FIBER 630 E, a machine designed for use in fiber optic cable installation work in civil engineering and road construction. Bwsdpfx Afs Agg Igegew This machine is suitable for professional use in fiber optic network expansion and supports efficient workflows on construction sites. If you are interested, we can provide further information regarding the year of manufacture, operating hours, and technical condition. Inspection is possible by appointment.

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) Bwedpfx Afowh Tq Segjw • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.

Condition: good (used), Year of construction: 2005, operating hours: 63,102 h, machine/vehicle number: A0230A1162, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 28,387 h, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, TRUMPF Trumatic L3050 Laser Cutting Machine Year of manufacture: 2005 Control system: Sinumerik 840D Laser type: TLF 6000 Laser power: 6000 W Working area X: 3000 mm Working area Y: 1500 mm Working area Z: 115 mm Max. speed X: 60 m/min Bwedpfx Afex Ap A Regsw Max. speed Y: 60 m/min Laser on hours: 63,102 h, Beam on hours: 28,387 h Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 15 mm Equipment: HI-LAS high-pressure cutting Cutting head with 5" lens Cutting head with 7.5" lens Quick-change cutting heads Sheet position detection system Laser positioning diode Programmable selection of cutting gases with stepless pressure adjustment Micro welds PMS plasma monitoring system Sprint-Las Head distance regulation (DIAS III) ContourLas AutoLas Plus Oil spray system Hydraulic pallet changer Work area lighting Longitudinal conveyor Sectional extraction system Filtration system Automatic shut-off Light barriers Tele-service RJ 45 3.5'' floppy disk drive User manual Used machine in good condition, inspected by qualified personnel. Machine available in March 2026.

Condition: used, POWERLOCK MOUNTED MILLING HEADS, price €7,500 Two cabinets filled with milling heads for various applications, approximately 45 pieces. Working dimensions in mm: 40 - 1 piece 60 - 12 pieces 80 - 7 pieces 100 - 9 pieces 130 - 3 pieces 140 - 1 piece 150 - 7 pieces 170 - 3 pieces Bjdpfjzxguiex Afgoww 180 - 2 pieces

Condition: good (used), Year of construction: 1976, Deckel FP3 tool milling machine with 3-axis Heidenhain digital display, the machine is in good condition. Rigid table, SK 40 spindle taper, accessories: various collets and arbor holders, counterholder. Good, operational condition. Can be demonstrated under power by arrangement. Bjdpfxexbx R Us Afgoww

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Bwjdpfxoz N Sfmo Afgsw Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container.

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter A very rare model on the market. The machine is ready to work, in very good technical condition. Bodpfoz N Sftjx Afgsww After inspection. Suitable for die-cutting. Central lubrication. Format 40×57 cm Weight 3500 kg Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, input voltage: 220 V, The JAC Eco+ 450 (also referenced as the ECH 450/99) is an automatic, mobile bread slicer manufactured by JAC Machines, featuring their patented Intelligent Slicing Control (ISC) system. This machine is suitable for slicing bread with a maximum dimension of 440 x 160 mm. Key Features Intelligent Slicing Control (ISC): An automatic pressure and slicing speed regulation system that adjusts cutting parameters based on bread consistency without requiring manual adjustments. Jacflaps: A specialized mechanism that holds the loaf together securely to make unloading seamless. Loaf Pusher Heights: configurable with Extra low (50mm), Low (80mm), or High (100mm) The slicing thickness is 14 mm. Amperage: 4 A Frequency: 50 Hz Power supply: 230V single phase Blade/Knife Count: 34 knives Working width: 450 mm Blade dimensions: 13 x 0.5 mm steel Max. Loaf dimension: 44 x 31 x 16 cm Motor power: 0.49 kW Noise level during operation: < 70 db Surround environment temperature: 5 to 40°C Surround relative humidity: 30%-95% With metal & plastic crumb tray: 18-liter capacity (accessible via front tilting door); Outside dimensions: length 600 mm x depth 750 mm x height 1300 mm Machine weight 180 kg This machine is in good condition Video: Price Euro 1.500 Euro + VAT, negotiable, FCA: Oradea/Romania Bsdpfxoz Evims Afgjww Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), SUDA FC 1530 Steel Laser Cutter Material / Metal Laser type / Fiber laser Cutting area / 1500 x 3000 mm Cutting thickness / depends on the processed materials Laser source brand / RAYCUS RFL-C1000 Operating mode / continuous wave Configuration / 3-axis Supported cutting products / sheet metal and tube Cooling / air and liquid cooled using S&A CWFL-1000 chiller Cutting speed / depends on the material type Supported graphic formats / AI, PLT, DXF, BMP, DST, DWG, LAS, DXP CNC / yes Bjdpjvkf Rdofx Afgeww Laser head brand / WSX Servo motor brand / Schneider Guideway brand / THK Control system brand / Cypcut Control system Operating system / CYPCUT system Power supply / 1000W Laser wavelength / 1080nm Working area / 1500 x 3000 mm Positioning / red dot pointer Height: 1850 mm Width: 2111 mm Length: 3450 mm Weight (kg) / 2500 kg The offer concerns a SUDA FC 1530 steel laser cutter + S&A CWFL-1000 chiller. !The sheet metal straightener is listed in a separate auction!

Condition: good (used), Year of construction: 2004, max. grinding diameter 230 mm grinding length 5x9 / 19.05x27,94 mm workpiece length 65 mm control GE Fanuc Series 160i-M weight of the machine ca. 7,7 t dimensions of the machine ca. 3,8x2,6x2,3 m Bsdpfx Afs Ahdt Njgsww

Condition: excellent (used), Year of construction: 1962, Ref: 11154 . 1962 Heidelberg SBG Cylinder Bjdpfez Ek Nuex Afgjww Professionally converted for precision die cutting and creasing applications. Features: For die-cutting / creasing in packaging and commercial finishing Used for carton production, creasing, embossing, or die-cutting Cylinder mechanism ensures consistent pressure distribution Ideal for materials such as cardboard, paperboard, and synthetic substrates Highly efficient, accurate and durable Long-term mechanical reliability. Comprising; Single sheet suction feeder Spring loaded gripper action Chain delivery 2 Standard chases. Specification: Max sheet size: 570 × 770 mm Min sheet size: 210 × 280 mm Max. impression area: 530 x 760 mm Speed: Max. 4,600 sheets/hour Machine size (L×W×H): 3,500 × 2,000 × 1,850 mm Net weight: 5,850 kg

Condition: good (used), Year of manufacture: 2021 Empty weight: 620 kg Dimensions of cargo space: 279 x 89 x 126 cm Technical condition: good Visual appearance: good Production country: NL Please contact Christian Theißen for more information Bsdpfx Aoz R S I Sjfgoww Manufacturer: Vermeer Corporation Model: Stump Cutter SC362 Year of build: 2021 Condition: Used Data: Drive type: 35 PS Performance: 21,1 kW Fuel type: Benzin Number of milling teeth: 16 Milling height: 61 cm Milling radius: 119 cm Milling depth: 38 cm Transport dimensions LxHxW: 2,79 x 0,89 x 1,26 m Empty weight: 620 kg Special features: Caterpillar drive Price on demand Location: 41468 Neuss Available immediately

Condition: used, Year of construction: 2017, functionality: fully functional, Rotox FWS 381 Bsdpozpygyjfx Afgsww

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Bjdpfx Afjz Dtbwsgeww Photo safety barriers. Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Year of construction: 2022, condition: like new (used), functionality: fully functional, WOOKIL MEGACUT MC-2500 Die Cutter Bwjdpfoz Suafjx Afgjw MAX. SHEET SIZE: 1800x2600 mm MAX. CUTTING SIZE: 1700x2500 mm MAX. CUTTING PRESSURE: 550 tons

Condition: excellent (used), Year of construction: 2006, Ref: 11165 . 2006 Young Shin Revotec 106 SR Automatic flatbed die cutter engineered for precision die cutting and stripping Only 12 Million Sheets Run! Features: Bobst die compatibility Integrated lead-edge removal 20% heavier frame than comparable models offers exceptional stability and accuracy The 25% higher impression tonnage expands substrate flexibility Non-stop delivery apron supports continuous production Specification: Maximum Sheet Size 1060 x 760 mm Minimum Sheet Size 400 x 340 mm Maximum Cutting Size 1060 x 745 mm Inside Chase 1140 x 784 mm Minimum Gripper Margin 8 mm Bjdpfxo Affa Uj Afgoww Maximum Speed 7500 sph Maximum Cutting Pressure 300 Tons Sheet Thickness Manila: 0.1 – 1.5 mm Corrugated Board: E, B Flute (Max. 4 mm)

Condition: used, functionality: fully functional, overall weight: 2,800 kg, Year of construction: 1996, Rock/Excavator-mounted milling cutter Cutting head diameter x width: 750 x 1,500 mm 76 cutting tools Maximum operating pressure: 300 bar Bwsdpez Az S Ijfx Afgsw Cutting force: 60 kN