Used Boston Wire Stitcher for sale (3,635)

Condition: used, Year of construction: 2009, operating hours: 3,641 h, functionality: fully functional, machine/vehicle number: 09N12011, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, total height: 2,015 mm, total length: 2,706 mm, total width: 2,706 mm, workpiece height (max.): 215 mm, workpiece width (max.): 700 mm, workpiece length (max.): 810 mm, table width: 550 mm, overall weight: 2,500 kg, table length: 650 mm, We are selling a Mitsubishi NA1200 Advance wire EDM machine. The machine was in operation in our single-shift production until recently and can be inspected under power. Iiedpfx Aasxm Rl Isbsh

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2015 Travel paths (X/Y/Z): 220 x 160 x 100 mm Travel paths (U/V): ±40 mm Max. taper: 3° at 80 mm height Iiodpfjxfvfwox Aabjh Includes F-Module, suitable for wire diameters from 0.02 mm to 0.2 mm Best achievable surface finish: Ra=0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER hand box for convenient machine setup 15” LCD color display with lifting keyboard and mouse AGIEVISION control system Includes AGIESETUP 3D Includes AGIEDUO dual-wire system for automatic switching between two wire diameters Machine dimensions: 1400 mm x 1900 mm x 1970 mm Machine weight: 2,700 kg The machine will be cleaned, completely overhauled, and thoroughly tested by our specialist technicians. We are happy to install the machine at your site and provide training for both control system operation and machine handling.

Condition: good (used), functionality: fully functional, A Thermobend 2000 is a bending machine used for bending plastic sheets such as PMMA (acrylic glass) and methacrylate. The machine operates with heating wires to heat and bend the sheets at specific locations. Key features Capacity: The machine has a usable length of 2000 mm. Functionality: Can bend sheets with a thickness of 1 mm to 20 mm. Configuration: Equipped with 2 bending beams heated both from above and below. The distance between the wires is adjustable, with 3 wires above and 3 below per group. Dimensions: Length: 3200 mm x Width: 1000 mm x Height: 1600 mm Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Iijdpfoxn T Nrsx Aaboh Financial information VAT/margin: Margin: The listed price includes VAT (VAT is non-deductible for businesses).

Condition: like new (used), 🧰 Product Features • Condition: as new • Colour: galvanized • Dimensions: 875 x 1115 mm • Mesh size: 50 x 112 mm • Load capacity: 500 kg per grid • For beam length 1800 mm: 2 units required • For beam length 2700 mm: 3 units required • For beam length 3600 mm: 4 units required 💰 Price €9.90 net excl. VAT Iisdjwhvv Depfx Aabeh • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment Constantly over 5000 linear metres of pallet racking from various manufacturers in stock (Specifications, details, and prices subject to change and errors excepted. Sale subject to prior sale! See our terms and conditions, all prices excl. VAT ex stock.)

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Ijdpfx Aajtylpcobsih

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 2700 mm Measurements depth 2550 mm Measurements height 2545 mm Machine weight 5500 kg Control Unit Brand FANUC Model PC Main Drive Number of axis 5 Movement X-Axis Movement 800 mm Y-Axis Movement 550 mm Z-Axis Movement 510 mm V-Axis Movement 550 mm U-Axis Movement 800 mm Isdpfx Aoxbum Ejaboih Workpiece Workpiece weight 3000 kg Media Power consumption 12 kVA This 5-axis AgieCharmilles FI 640 CC was manufactured in 2008, featuring a robust design with machine dimensions of 2550 × 2700 × 2545 mm and a weight of 5500 kg. It supports a maximum workpiece weight of 3000 kg and dimensions up to 1300 × 1000 × 510 mm. Equipped with collision protection and automatic wire threading, it's ideal for precise wire EDM tasks. Contact us for more information about this machine. Application Types EDM

Condition: used, SCM L'Invincibile F4 Surface planer + drilling machine Ijdpeqqu Amofx Aabsih

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Optional: - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation Ijdeuuz Iiepfx Aabsih - Clamping bar set

Condition: used, Year of construction: 1999, functionality: fully functional, Fully functional machine. Ijdpfxjwmw I Ss Aabeih Viewable at our Semsales premises from mid-June.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, The used FANUC ALFA 1-iD wire EDM is a medium-sized 5-axis CNC erosion machine with immersion machining; travel X 600, Y 400, Z 410 mm; year of manufacture 12/2007 (installed 2008), CE compliant, complete with automatic wire threading and chiller. Technical specifications of the FANUC ROBOCUT ALPHA 1iD wire EDM: CNC Control: Fanuc Series 310is-WA 5 axes (X, Y, Z, U, V) Iedpexd R R Eefx Aaboih Axis travels X/Y/Z/U/V: 600/400/410/200/200 mm Rapid traverse on axes X,Y,Z: 900 mm/min Rapid traverse on axes U,V: 450 mm/min Maximum workpiece dimensions (L x W x H): 1050 x 820 x 400 mm Maximum workpiece weight: 1000 kg Maximum cutting angle: 30 degrees Automatic wire threading Maximum wire spool weight: 16 kg Wire diameter: 0.1-0.3 mm Total power required: 13 kW Machine dimensions (L x W x H): 2440 x 2930 x 2160 mm Total machine weight: 3000 kg

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Iodpfxetylpis Aabjih

Condition: refurbished (used), Year of construction: 2001, NICE MACHINE REFURBISHED Iedpfx Aasxc Elhebeih

Condition: ready for operation (used), functionality: fully functional, Technical Data – SENY D75B: Rolling Pressure: 220 kN Workpiece Diameter: min. 3 mm – max. 70 mm Maximum Pitch: 6 mm Maximum Groove Pitch: 2.25 mm Maximum Roll Width: 160 mm Roll Diameter: min. 133 mm – max. 170 mm Roller Shaft Rotational Speeds: 24 – 30 – 38 – 45 – 62 – 72 – 90 – 114 rpm Iiedpfx Aaexm Stgjboh Roll Holder Shaft Diameter: 54 mm standard – 69.85 mm special Distance Between Shafts: min. 135 mm – max. 230 mm Working Stroke: max. 15 min Feed Rate: 0.5 mm/s – 6 mm/s Rolling Time: 0.1 s – 100 s Pause Time: 0.1 s – 100 s Main Motor Power: 5.5 kW Electrical Consumption: 8.6 kW Reservoir Capacity: 130 liters Weight: approx. 2,100 kg. Additional rolls available: M4.5 x 0.75 ISO. M6 ISO. M10 ISO.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 25227, conveyor belt width: 60 mm, punching force: 7 t, Two Bihlers are for sale. Price per piece Iiodpfjv Nv Dljx Aaboh A reel is available if needed.

Condition: excellent (used), Year of construction: 2002, operating hours: 34,000 h, functionality: fully functional, Agie Excellence 2F, year 2002. Machine in excellent condition. Can be inspected at our premises in Semsales, Switzerland. Iiedpfsw N Tazsx Aabeh

Condition: good (used), Year of construction: 2004, functionality: fully functional, The used FANUC ALFA 1-iC wire EDM is a medium-sized, 5-axis CNC-controlled electrical discharge machine with submerged machining; X/Y/Z travel: 550/370/410 mm; year of manufacture: 2004, CE-compliant, complete with automatic wire threading, chiller, and openable roof. Technical specifications of the FANUC ROBOCUT ALPHA 1iC wire EDM: - Maximum workpiece dimensions (L x W x H): 820 x 730 x 300 mm - Maximum workpiece weight: 1000 kg - CNC control: Fanuc Series 180is-WB - 5 axes (X, Y, Z, U, V) - Stroke on axes X/Y/Z/U/V: 550/370/410/120/120 mm - Rapid traverse on X, Y, Z axes: 900 mm/min - Rapid traverse on U, V axes: 450 mm/min Iijdpfxsxd R Hms Aabeh - Worktable size (L x W): 780 x 600 mm - Maximum cutting angle: 30 degrees - Automatic wire threading - Wire diameter: 0.1–0.3 mm - Electrical supply: 400 V; 50/60 Hz - Total power requirement: 13 kW - Total machine weight: 3100 kg

Condition: used, Year of construction: 2002, Saddle stitcher Heidelberg ST 400 Year: 2002 Feeders - Number of chain stations: 10 - Horizontal signature feeders: 7 x TAL 400 - Vertical signature feeders: 2 x TAS 400 - Cover feeder: UFA 400 - Pump(s) Stitching unit Heidelberg ST 400 (HM 400) - Stitching heads: 2 Trimmer Heidelberg TRZ 400 - Sets of knives: 1 Ijdpsxftgrofx Aaboih Delivery Heidelberg Sa 350/450 Year: 2005 - Belt delivery

Condition: used, Year of construction: 2015, x-axis 550 mm y-axis 350 mm z-axis 400 mm U-axis 550 mm V-axis 350 mm Ijdpfx Aasxddtmebeih volume 1200 L inclination +/-30°/400 mm dimensions 1200x700x400 mm weight 1500 kg wire dia. 0,10-0,33 mm Bobbin Weight max. 25 kg

Condition: used, Year of construction: 2004, Technical details: table length: 920 mm table width: 600 mm ampere: 13,2 A weight of the machine ca.: 6 t Iiedpfx Aeuzbaysabeh dimensions of the machine ca.: 2,46 x 2,24 x 2,33 m X-axis: 600 mm y-axis: 400 mm Z-axis: 260 mm max. table load: 1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg. *

Condition: excellent (used), Electric closing machines for RENZ RING WIRE® wire comb binding. Effortless binding. The fast and user-friendly solution for small, medium, and time-critical runs. The machines are available with a 360 mm working width. - Quick adjustment of wire comb diameter via rotary knob with scale - Integrated hang-up device for convenient operation Iiodjxmaqaepfx Aabsh - Binds up to 340 sheets - Reliable, fast, and continuous binding cycle from first to last bind - Handles the largest RENZ RING WIRE® elements up to 1 1/2" (38 mm) diameter - Automatic safety device - Parallel adjustment for uniform binding Connection: 230V / 50Hz

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 690 h, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 222 mm, total length: 300 mm, total width: 185 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 820 mm, type of input current: three-phase, overall weight: 2,850 kg, Equipment: cooling unit, GF CUT E 350, year 2022. Machine like new, only 685 hours of operation (upgradable). Available in our Semsales workshop at the end of February. Ijdpfx Aevvld Ioabeih

Condition: good (used), Year of construction: 1999, machine/vehicle number: 321.0400, Equipment: compressor, 4 feeders, max format 31 cm x 44 cm 1 stitching station 321 with 4 HK stitching heads, 2 narrow stitching heads, 2 loop stitching heads Iijdpfoxf Uvnox Aabsh 1 three-knife trimmer 306, centre-cutting device 1 cross stacker 306

Condition: refurbished (used), Year of construction: 2012, operating hours: 24,760 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 200 mm, total length: 220 mm, total width: 200 mm, type of input current: three-phase, empty load weight: 2,450 kg, GF CUT 200 MS, year 2012. Iiedovvlhyspfx Aabjh Excellent condition, the machine will be cleaned, revised and tested. Option 0.1 mm. Available in our workshop in Semsales during March.

Condition: refurbished (used), Year of construction: 2007, operating hours: 15,125 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 200 mm, total length: 260 mm, total width: 280 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, type of input current: three-phase, overall weight: 3,300 kg, Charmilles Robofil 440SLP, 2007. Only 15,100 hours of work. Machine fully serviced and working. Viewable at our Semsales premises in Switzerland. Iisdpjv Rbxwefx Aabsh

Condition: excellent (used), Year of construction: 2005, operating hours: 27,000 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, empty load weight: 2,500 kg, Equipment: documentation/manual, Machine in excellent condition. Machine already cleaned. Sold as is or revised on request. Machine visible in our premises in Semsales in Switzerland. Iisdpfjv Im R Tsx Aabsh