Used Boston Wire Stitcher for sale (3,633)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Technical Specifications Travels (X / Y / Z): 350 × 250 × 256 mm U / V Axis Travels: ± 70 mm Max. Workpiece Dimensions (LxWxH): approx. 750 × 550 × 250 mm Max. Workpiece Weight: approx. 450 kg Table Size: 620 × 400 mm Wire Diameter: 0.15 – 0.33 mm (commonly 0.25 mm) Max. Taper Cutting Angle: ± 30° at 100 mm height Positioning Accuracy: ± 2 µm Iiedpfoxmu Sfox Aabjh Psw N Hjxdubzjl Icsrb Wire Threading System: Fully automatic, fast, reliable Generator: Intelligent GF AC Cut, real-time spark control Surface Finish: up to Ra 0.1–0.2 μm (after finishing cuts) Control System: AgieVision (ergonomic, touch display, 3D graphics) Dielectric: Deionized water Machine Dimensions (LxWxH): approx. 2200 × 2200 × 2200 mm Machine Weight: approx. 3500–4000 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 21,250 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, workpiece height (max.): 305 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 820 mm, table width: 840 mm, overall weight: 4,090 kg, table length: 640 mm, A Mitsubishi MV2400R is for sale. Travel: X-axis: 600 mm Y-axis: 400 mm Z-axis: 310 mm U/V-axis: +/- 75 mm Design: 4-sided frame table, hardened with automatic vertical sliding door as a water bath machine Iisdpowlq Hlefx Aabeh Table size: 840 x 640 mm Workpiece size: max. 1050 x 820 x 305 mm Workpiece weight: max. 1500 kg Wire ¯: 0.1 to 0.3 mm for wire spool holder 10 kg Control: MITSUBISHI M800 with 19" full-touch monitor (including handheld pilot with configurable LCD monitor) Closed control loops Min. axis resolution 0.05 μm Generator: H-FS fine finishing generator Digital AE II Generator Equipment: Tubular drives with linear scales (X/Y/U/V) Handheld pilot with configurable LCD monitor 20 kg wire station Angle Master Advance II Set Consumable parts box Ergolux lamp Corehold function Job planner Filter pump pressure sensor Operating data output Free software update as needed Digital electricity meter / filter pressure sensor Ethernet/DNC/FTP Automation ready McAfee AntiVirus embedded McAnywhere Service 3D CamMagic on board Machine weight: 4,090 kg Installation dimensions: 2687 x 3030 x 2150 mm Option: HIRSCHMANN clamping system (not included in price)

Condition: good (used), Year of construction: 2011, operating hours: 25,000 h, functionality: fully functional, Equipment: compressor, Heidelberg ST 100 Saddle Stitcher 6 Feeders + Cover Feeder | Year 2011 | We are selling our well-maintained and fully functional Heidelberg ST 100 saddle stitching line with 6 feeders and cover feeder, year of construction 2011. The machine has been serviced regularly and is ideal for print shops or bookbinderies seeking a reliable saddle stitcher. Technical details: Maximum format size (uncut): 355 x 311 mm Minimum format size (uncut): 128 x 92 mm Maximum format size (trimmed): 349 x 305 mm Minimum format size (trimmed): 120 x 89 mm Maximum product thickness: 10 mm Iiodpfx Aajxn Ddmoboh Mechanical speed: up to 9,000 cycles per hour Number of feeders: 6 (including 4 double vertical feeders) Cover feeder: Yes Stitching heads: Standard or loop stitch, up to 4 heads Trimmer: Three-knife trimmer for precise cutting Location: 12277 Berlin Marienfelde, Nunsdorfer Ring 13 Sale: ex works/location Reason for sale: New investment The machine can be inspected and collected by appointment. If you have any questions or require further information, please feel free to contact us.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, workpiece weight (max.): 5,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, total height: 2,740 mm, total length: 3,600 mm, total width: 3,900 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 595 mm, workpiece width (max.): 1,330 mm, workpiece length (max.): 990 mm, overall weight: 8,500 kg, For sale is a demonstration unit: Accutex AU860iA Max. workpiece size (L x W x H, mm): 1330 x 990 x 395 Max. workpiece weight (kg): 5,000 X/Y/Z travel (mm): 800 x 600 x 400 (optional Z600) U/V travel (mm): 150 x 150 Iiedpsxnx Itofx Aabeh Wire spool weight (kg): 16 Machine dimensions (W x D x H, mm): 3900 x 3600 x 2740 Machine weight (kg): 8,400 Water system capacity (l): Main tank: 2420 (Z400); Side + Main tank: 1630+1280 (Z600)

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 4500 kg Iedpfowgp S Ajx Aabeih Main Drive Number of axis 3 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 256 mm Workpiece Workpiece weight 200 kg Additional Equipment Wire System: Wire diameter 0.1-0.33 mm, Wire speed 60-300 mm/s, Wire tension 0-25 N, Wire spool up to 25 kg, Threading system up to 250 mm height, nozzles 1 mm and 2 mm This 3-axis AGIE Challenge 2 eCut wire EDM machine was manufactured in 2006. It offers precision electrical discharge machining capabilities, ideal for detailed and intricate metal work. Consider the opportunity to buy this AGIE Challenge 2 eCut wire EDM machine. Contact us for more information about this machine. Application Types EDM

Condition: used, offer consist of: - control for stitching wire Horizon stitching wire control Iiodpfxou Srv He Aaboh function: prevents the stitching wire is used up completely and must be threaded into the stitching head - compatibel with: Horizon SPF-200A

Condition: good (used), Year of construction: 2006, functionality: fully functional, Travel (X/Y/Z): 350 × 250 × 250 mm Max. workpiece dimensions (X/Y/Z): 750 × 550 × 250 mm Max. workpiece weight: 200 kg (450 kg) Max. taper angle +/- 30°, 100 mm (U/V) travel: +/- 70 mm Automatic wire threading Wire diameters: 0.10–0.33 mm AGIE IPG generator with power module Iiedpfx Aaoxmu R Ujboh Machine dimensions (mm): 1640 × 2040 × 2220 mm Machine weight: 3350 kg Cooling external cooling required Best surface finish Ra 0.2 µm Year of manufacture: 2006 Fully functional

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, GF AgieCharmilles Progress VP3 Year of manufacture: 2009 Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (out of tank) Iiodpfx Aexggdmeaboh Achievable surface quality: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE IPG-V generator AGIEVISION 5 control unit Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine is cleaned and fully overhauled after receipt of order. You will receive a 6-month warranty on all machine parts. We are also happy to offer commissioning and training services.

Condition: excellent (used), Catalogue number: 7551 TECHNICAL DATA Veneer thickness: 0.4–2 mm Iiodsvx Rg Hepfx Aabeh Passage width under the body: 920 mm Foot pedal control Table dimensions: 1250x340 mm 2 metal pressure rollers Required air pressure: 6 bar Lower rubber feed roller 2 smooth metal feed rollers Motor: 0.55 kW Dimensions (L/W/H): 1400x550x1500 mm Weight: 205 kg – German-made – Not painted – DTR documentation – Very good condition – Used stapler Net price: 8,500 PLN Net price: 2,020 EUR based on a 4.2 PLN/EUR rate (Prices may change with significant fluctuations)

Condition: ready for operation (used), Year of construction: 2001, Immediately available from a small toolmaking workshop: Mitsubishi Wire EDM Machine Type FA 20 – S Advance Year of manufacture: 2001 Ijdpfoxn Rynjx Aabjih Table load / workpiece weight up to 1,500 kg Travel X/Y/Z: 500/350/300 mm Submerged (water bath) machine Automatic wire threading Complete accessories Price: EUR 4,000.— plus VAT ex location

Year of construction: 2021, operating hours: 2,482 h, condition: ready for operation (used), Main Drive Number of axis 2 Iedpfxexgkdws Aabeih This AgieCharmilles CUT E 600 was manufactured in 2021. A reliable wire EDM machine, it offers precision and efficiency for your machining needs. Consider the opportunity to buy this AgieCharmilles CUT E 600 wire edm machine. Contact us for more information. Application Types EDM

Condition: excellent (used), Year of construction: 2017, operating hours: 8,000 h, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, total height: 2,815 mm, total length: 3,475 mm, total width: 3,130 mm, This machine is very well maintained and in excellent condition. You can inspect and test the machine under power. The price is ex works, without disassembly. Manufacturer: Mitsubishi Electronic Year of manufacture: 2017 Model: MV4800 Operating hours: approx. 7,166 hrs Application type: EDM wire cutting Machine type: Wire EDM machine Technical Data – Mitsubishi MV4800 General Information Width: 3,130 mm Iiedpfxsxnxmcs Aabjh Depth: 3,475 mm Height: 2,815 mm Weight: 5,700 kg Travel X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 510 mm U/V travel: 200 (+/-100) mm Workpiece Diameter over bed: 1,250 mm Diameter over carriage: 1,020 mm Workpiece diameter: 505 mm Max. table load: 3,000 kg Worktable Outer length: 1,080 mm Outer width: 780 mm Price significantly reduced.

Condition: used, Year of construction: 2000, operating hours: 70,000 h, Manufacturer: TBE BUTLER Model: TBE MULTIBEND Fully documented, available for inspection and verification! Ijdexclfhopfx Aabjih Wire diameter range: 1.0 mm to 10.0 mm 8 servo axes as standard – optionally up to 24 axes Integrated program memory Independent eyelet station Tilt control at the bending heads Servo indexing unit for 3D rotation Automatic part rotation for multi-level bending Modular tools – quick changeover times Integrated decoiler Complete diagnostic and fault-tolerance systems Touchscreen programming controls – Allen-Bradley®

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: D12L/8393, Offer Number: D12L/8393 Machinetype: wire nail press Make: WAFIOS Type: N41 Iiedexnykpjpfx Aabsh Constr. year: 1987 diameter range: 1,8-3,4 mm nail length: 13-80 mm output - pieces/min: 550 Location: In our warehouse

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 15 h, chain length: 71,000 mm, power: 2.2 kW (2.99 HP), INDUSTRIA 2 t, FEM/ISO 1Am/M4 - 5 m/min, low voltage control with 1 speed. Electric winch 2000 kg. Range of electric winches initially designed to meet the needs of the industrial sector. Applications: All lifting or pulling/hauling tasks Industry Construction and public works Integration into cranes, etc. Pulling/hauling heavy loads Conveyor belt tensioning Opening hatches Iiodpoxbbupsfx Aabjh Lifting sluice gates Stage and event industry...

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm Iijdpfjw Spa Nox Aaboh travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3

Year of construction: 2005, condition: ready for operation (used), This 3-axis Sodick AQ327l wire EDM machine was manufactured in 2005. Despite a permanent short circuit due to a defective circuit board, it includes replacement belts and has had its axis drives and controls replaced. Operated via a PC monitor, it comes with a repaired computer and SolidWorks software. Consider the opportunity to buy this Sodick AQ327l wire EDM machine. Contact us for more information about this machine. Isdpfx Aaexf N Nisbeih Application Types EDM

Condition: ready for operation (used), Year of construction: 2001, operating hours: 19,430 h, functionality: fully functional, machine/vehicle number: MMZO 531 524, product height (max.): 5 mm, product length (max.): 480 mm, product width (max.): 320 mm, production capacity: 14,000 unit/h, The electronics and EPS were renewed in 2018! The machine is equipped as follows: - 1 x UG feeder - 9 x rotary feeders - 1 x card gluer TECHNICAL DETAILS Format (maximum): 480 x 320 mm Format (minimum): 153 x 108 mm Product thickness: 3 – 5 mm Performance Maximum mechanical speed: 14,000 cycles/h Iijdpfsxn R U Ejx Aaboh Production speed Post-fold: max. 14,000 units/h Pre-fold: max. 9,000 units/h Suction opening: max. 12,000 units/h MACHINE DETAILS Operating hours: 19,430 h Note: The positions 6 & 22 indicated in the legend are no longer for sale. The legend can be found in the attached machine layout.

Condition: repair required (used), Manufacturer: FANUC Tip: A04B-0221-B201 The condition of the machine is unknown, it does not work, it is for sale in this condition, !!! We do not know what is the probleme! Iiedpfxoik Hb Ts Aabsh

Condition: used, Year of construction: 2012, Wire EDM machine Mitsubishi BA 8, year 2012. Technical data available as PDF file. Ijdpfexnqdyjx Aaboih

Condition: used, Year of construction: 2002, Saddle stitcher Müller Martini Presto Year: 2002 Feeders - Number of chain stations: 8 Iiodpfx Aeip Eypeabjh - Hand feeding station(s) - Horizontal signature feeders: 6 x 1551 (3 x 2) - Cover feeder: 1528 - Pump(s) Stitching unit Müller Martini Presto - Thickness control - Stitching heads: HK 75 - Delivery to the left - Reject gate, for incomplete products Trimmer Müller Martini 1522 - Sets of knives: 1 - Excluding delivery

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min Iijdpfx Asw Spbtjabsh rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, High-Precision Wire EDM Machine AGIE Vertex 1 Year of manufacture: 2008 Travel paths (X/Y/Z): 220 x 160 x 100 mm Travel paths (U/V): +/- 40 mm Taper cutting: Up to 3° at 80 mm height Available wire diameters: 0.05 mm to 0.2 mm Best achievable surface finish: Ra = 0.05 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Machine dimensions: 1400 mm x 1900 mm x 1970 mm Machine weight: 2,700 kg Including AGIEJOGGER handbox for convenient machine setup 15" LCD color display with lift-up keyboard and mouse AGIEVISION control Including AGIESETUP 3D Iedpfx Aaoxf Dwnsbjih Including AGIEDUO dual-wire system for automatic switching between two wire diameters The machine is cleaned, overhauled, and thoroughly tested by our specialists. We are happy to commission the machine at your site and provide training in control and machine operation.

Condition: used, Year of construction: 2001, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: P0131I146, workpiece weight (max.): 1,000 kg, travel distance X-axis: 520 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 310 mm, overall weight: 2,600 kg, Wire EDM machine in excellent condition with few operating hours, purchased used and refurbished directly by the official FANUC dealer. The machine is equipped with a chiller to maintain the working water temperature and comes with all the necessary equipment for machine setup. Iiedpfx Aow N Tbreabjh

Condition: used, Year of construction: 2009, operating hours: 3,641 h, functionality: fully functional, machine/vehicle number: 09N12011, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, total height: 2,015 mm, total length: 2,706 mm, total width: 2,706 mm, workpiece height (max.): 215 mm, workpiece width (max.): 700 mm, workpiece length (max.): 810 mm, table width: 550 mm, overall weight: 2,500 kg, table length: 650 mm, We are selling a Mitsubishi NA1200 Advance wire EDM machine. The machine was in operation in our single-shift production until recently and can be inspected under power. Isdpfxjxm Rl Io Aabjih