Used Cantilever for sale (201)

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone Hjdoh Ek Daopfx Abzew - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, - Number of uprights [pcs]: 15 - Number of beams [pcs]: 16 Hjdowub H Iopfx Abzow - Arm length [mm]: 1200 - Upright height [mm]: 3950 - Foot length [mm]: 1500 - Width between uprights [mm]: 1300 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: good (used), Year of construction: 2005, Cantilever rack, two-sided, height 2.90 m, arms 1.20 m each with 2 crossbeams between the arms/levels, ideal for storing goods, e.g., on Euro pallets - used -: Price ex-site: €24,500 (net) including disassembly and loading! Price for partial quantities upon request - minimum order per rack! Manufacturer: Bruckamp Shelving Systems Type: unknown Year of construction: 2005 Hodpfx Abswi I Tdjzsw Maximum load per arm: 2,000 kg Arms bolted Maximum load per upright: 2 x 2,000 kg Outreach per arm: 120 cm (IPE 100 standard) Total height per rack: 2.90 m (IPE 160) Number of uprights: 69 (currently 3 x 23) The center distance between the frames is 1,240 mm. The heights of the middle and top levels are fixed. These could possibly be offset by drilling new holes. There are no pre-drilled holes. Version / Shelf A: Divided into three sections on both sides Version / Shelf B: No middle section Version / Shelf C: Central section only on the right Condition: Good Available: Immediately Location: Schweinfurt / Würzburg area

Condition: used, Cantilever racking, heavy duty racking -without insert trays: none available -Double sided -consisting of: Hodpfxocn Am Io Abzow -Shelf: each with 3 uprights, 5.4 m high -Double-sided support arms: 500 mm long -Bolt load capacity: 795 kg -Payload per side: max. 7000 kg -screwed -Number: 3x shelves available -Price per piece -Own weight: 1250 kg / piece

Condition: excellent (used), carrying capacity per cantilever arm: 330 kg, shelf height: 2,500 mm, axle spacing: 1,250 mm, shelf length: 5,200 mm, Cantilever racking H 2500 mm Manufacturer: BITO Length: approx. 5.2 meters Height: 2500 mm Load per arm: 330 kg Cantilever arms, length 600 mm Distance between uprights: approx. 1250 mm Total depth of racking: 1340 mm The cantilever rack consists of: * 5 uprights with base, made from IPE 140 profile, upright height 2500 mm * 35 cantilever arms, length 600 mm, load per arm 330 kg * Diagonal braces, bolts, connectors Total weight: approx. 500 kg Hsdowzzrqopfx Abzow Price: 1,000 euros net 2 sets available

Condition: used, 10 galvanized shelf inserts for cantilever racks Hedpjwx E Ttjfx Abzjw Length: 4.18 m Width: 0.80 m Upstand: 80 mm Total area: 30 sqm

Condition: used, total height: 9,000 mm, Double-Sided Cantilever • Height: 9 m • Maximum load capacity per column front: 8,100 kg Hjdswq Nivepfx Abzew • Maximum load capacity per arm: 900 kg each

Condition: excellent (used), Height: approx. 2000–4500 mm Width: approx. 1130 mm Usable depth: 1 x 1000 mm Upright load capacity: up to 3000 kg Arm load capacity: up to 500 kg 6 storage levels including base Single-sided design Bolted foot profiles Made from hot-rolled IPE sections Finish: high-quality industrial lacquer RAL 5010 Freely adjustable cantilever arms in 100 mm increments Rack upright: foot and arms bolted Increase storage capacity with reduced footprint Hsdpfop Dukqsx Abzjw Organized storage of long goods Price: €400/net per upright incl. We configure your custom racking system. Contact us. We also buy racks. Please send pictures and dimensions—we will make you an offer. Contact Brennholz Blum – Mr. Dominik Blum Delivery is available upon request For questions, just call or write.

Condition: new, Year of construction: 2020, Cantilever rack, one-sided, 6.30m high, 1.20m arms, 900kg per arm - new - : Price ex location incl. loading! 1 shelving unit with 4 uprights 3.732.-€ (net)! Transportation costs within Germany (without islands): 490.-€ (net)! One cantilever shelving system, hot-dip galvanized, consisting of: Shelving upright, one-sided approx. 6,300 mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with load center 600 mm 900 kg per arm / 4,000 kg per upright with 4 uprights per arm level 4 x 900 kg = 3,600 kg Profiles: Frame: IPE220, arms: IPE 100 with longitudinal and diagonal bracing e = 1300mm, standard is 1.30m. Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m there is a small surcharge on top of the stated price! Special dimensions (other center distances) are also available on request, but also cost extra and have a longer delivery time as they have to be made separately! If you do not specify a different center distance, we will deliver the shelf with a center distance of 1.30m. In this case, the length of a row of shelves with 4 uprights (3 bays) is approx. 4m. Supplied with all nuts and bolts (dispatch within Germany by parcel direct from Würth), without ground anchors. Hsdpfx Aofivg Sjbzow Other configurations (frame height, arm lengths, arm types etc.) available! Please contact us!

Condition: used, Year of construction: 2018, Cantilever rack, heavy duty rack Hedpfx Ajryx Tzsbzew -Manufacturer: Gemac, cantilever rack base field double-sided -Cantilevers: 5 per side -Compartment height: 33 cm -perm. Load: 200 kg per cantilever arm / 1000 kg total. see nameplate -Quantity: 12x shelves available -Price per piece -Dimension: 1315/1210/H2000 mm -Weight: 98 kg/piece

Condition: new, OHRA cantilever rack Negotiated price: € 5.940,00 net ex stock You are bidding on a rack with a length of 7.5 m, consisting of 6 uprights with base, 6 m high + 4 adjustable outriggers per upright (120 cm), load capacity 900 kg/outrigger. Diagonal bracing, stiffeners and spacers are included. Hedpjby Uunofx Abzjw Bridges, grids and chipboards are available separately at an extra charge! Frame spacing 150 cm Arm length / outrigger 120 cm Load capacity 900 kg / outrigger Load capacity per upright per side 3,600 kg Over 100 meters available. Heights of 2.5 m, 3 m or 4 m available. Other combinations on request. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous items from various areas Machines from all industries Remaining stock Special items swept clean company clearances Business liquidations Purchase of remaining stock Fast - flexible - ready for action! We also clear and or dispose of for liquidators. Write to us with a few keywords and we will get back to you as soon as possible.

Condition: new, Year of construction: 2022, Jungheinrich, Kongamek support arm trolley Drying boards for carpenters or joiners Jungheinrich article number: 167793-4A several available 3 packages, can be sent 14 layers Support arm diameter 20mm Installation height 1770mm External dimensions height 1960mm and length 1520mm Frame width and external dimensions depth 860mm Load capacity per level 20kg Own weight 73mm Hodpsvntzxefx Abzew Delivered disassembled

Year of construction: 2019, condition: like new (used), On offer are used and new cantilever racks and pallet heavy duty racks. Hedpehr D Dtefx Abzew We will be happy to provide you with an individual offer. Please inform us about the following: - Length and height of the desired rack, - number of shelf levels, - shelf loads. If you have any questions, please do not hesitate to contact us. Pictures are sample photos.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, carrying capacity per cantilever arm: 810 kg, load capacity: 3,900 kg, shelf height: 2,500 mm, total length: 38,750 mm, axle spacing: 1,250 mm, clearance between the columns: 1,250 mm, load capacity per stand: 3,900 kg, throat depth: 800 mm, We hereby offer you, subject to change, 39 linear metres of used heavy-duty cantilever racking, with a load capacity of 3900 kg per stand. Manufacturer SSI Schäfer GmbH Type KR Year of manufacture 2008 Stand load per stand side 3900 kg Support profile stand IPE 180 Stand height 2500 mm Cantilever arm length 800 mm Cantilever arm load 810 kg Cantilever arm profile with deflector INP 80 Composition: 34 stands 68 cantilevers 6 cross braces, axis dimension 1250 mm 72 longitudinal braces, axis dimension 1250 mm Cantilever arm shelving system 1: 16 stands, 15 bays, 34 cantilevers, 30 longitudinal braces, 3 cross braces, axis dimension 1250 mm = 17.5 linear meters Cantilever arm shelving system 2: 18 stands, 17 bays, 38 cantilevers, 34 longitudinal braces, 3 cross braces, axis dimension 1250 mm = 21.25 linear meters Condition: The cantilever rack is in very good condition as you can see in the photos and is loaded onto pallets dismantled. The above technical data was taken from the manufacturer's brochures or other sources for which we cannot guarantee their accuracy and completeness. The sale is without guarantee or warranty. Hedpfx Aovt Um Hebzjw We would be pleased if this cantilever rack is of interest to you and look forward to your inquiry. Your Mertens & Frowein GmbH service team

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 2.60m height, 1m arms, 600kg per arm, hot-dip galvanized - new -: Price: € 1,485,- (net) transport within Germany (excluding islands)!430,-€(netto) Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Hodpfod Epfvjx Abzjw German brand manufacturer, new goods Description: - Shelf uprights on one side 2,600 mm high, hot-dip galvanized - Foot and arm depth 1000 mm - each with 3 height-adjustable shelf arms - Load capacity at a load center of 500 mm - 600 kg per arm / 1,800 kg per stand with 4 stands per arm level 4 x 600 kg = 2,400 kg Profiles: Frame (stand): IPE 140, arms IPE 80 with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: good (used), Year of construction: 1998, Cantilever rack, heavy-duty rack -Manufacturer: LBE, cantilever rack base field double-sided -Cantilever arms: 5 levels per side, length 500 mm -Compartment height: variably adjustable -Load capacity: 1-sided 630 kg, see photos type plate -Quantity: 1x shelf available -Dimensions: 1300/1180/H1985 mm Hodpfx Ajtrzpwjbzow -Weight: 80 kg

Condition: good (used), Cantilever rack OHRA 3 m high Over 100 m in stock, see pictures. Height 3 m high Boom 100 cm Load capacity/boom 800 kg 4,5 running meters, 4 pcs. uprights with outrigger Negotiation price: € 2.160,-- /net Offer consists of: 4 pcs. uprights with foot 3 m high 4 adjustable outriggers, each upright 100 cm, load capacity 800 kg/outrigger. Diagonal braces, stiffeners and distances are included. Frame spacing 150 cm Hjdecd Dwyjpfx Abzjw Load capacity per upright per side 3.200 kg Height of 2.5 m, 4 m or 6 m available Other composition on request: Constantly over 3000 running meters of pallet racks from numerous manufacturers in stock. Transport and assembly available on request. (Changes and errors in the technical data, specifications and prices and prices and subject to prior sale! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various fields broom-clean business evacuations Business resolutions Fast - flexible - ready to hit! We clear and - or dispose also for liquidators. Write us with some keywords, we will contact you immediately. To get to our site please click on our logo!

Condition: good (used), Cantilever racking, heavy-duty racking, single-sided cantilever racking, pallet racking Hodpfxju Npg Ds Abzow -Cantilever rack: one-sided, 4 bays, solid design, height 2000 mm -Stands: 5 pieces 2000/1370/85 mm -Cantilever arms: 26 pieces 185 x 70 mm -Cantilever length: 17x 850 mm 4x 1060mm / 5x 650 mm -Accessories: Cross braces/angle profiles/mounting clamps see photos -Transport dimensions: 2000/1370/H450 mm -Total weight: 590 kg

Condition: excellent (used), Year of construction: 2013, Cantilever rack, heavy-duty rack, single-sided cantilever rack, pallet rack --Manufacturer: Bito,Cantilever rack one-sided, 3 bays type S height 3220 mm -Stands: 4 pieces 3220/750/75 mm grid 60 mm adjustable -Cantilever arms: 28 pieces 630/40/120 mm usable depth 600 mm Hodpfx Aetpdm Isbzsw -Load capacity level: 1600 kg -Transport dimensions: 3220/800/H360 mm -Total weight: 350 kg

Condition: good (used), Cantilever rack, heavy-duty rack -Cantilever rack: base field double-sided, 2 uprights Hsdpfx Ajr Ngpxobzew -Cantilever arms: 4 per side, length 500 mm -Compartment height: variably adjustable -Quantity: 2x shelves available -Price per piece -Dimensions: 1180/1195/H2960 mm -Weight: 139kg / 140kg

Condition: used, 1 unit lead and feed screw lathe TOS SN50C with ACU RITE III digital readout, 2 tool cabinets and various accessories, as per the pictures and inspection, self-dismantling required. Color: green. Condition: used. Payment method: advance payment by bank transfer. Storage location: Hall 1/enclosure. Shipping: Pick-up only – No shipping offered for this item! Hodpfx Aexrcfqobzjw

Year of construction: 2011, condition: excellent (used), centrifugal single-stage vertical cantilever pump FIP ALFA V2CH 50-33 Hodpfoh Rwafsx Abzsw construction of year:2011 DN:50 Nominal flow 40 m³/h Nominal head 29 m p [bar]: 16 T [°C]: -25 ÷ + 140 RPM: 1450 electrical power 11KW 400V 50Hz engine speed: 1450

Condition: used, Year of construction: 2011, equipped with: 5 transfer carriages in aisles 1-5, 2 material feed lines via roller conveyors, feed line via linked conveyor belt, transfer carriages, belt-driven, with cantilever in rake design, movable in X-/Y-/Z-axis, 2 lateral vacuum stacking and destacking stations, discharge belt Hodoxnadpepfx Abzsw

Condition: new, Pole pallet, manurack, mobilrack - new Mobile storage racks are used for storing goods of unusual dimensions and have a double purpose. They can be used as transport pallets and with the installation of 4 support tubes, they can be used to build storage racks which can be transported without having to reload the goods placed on them. Both heavy and light products can be stored on a metal pallet. Thanks to its simplicity and speed of assembly, Mobilrack can increase storage capacity in a few moments. At the end of the season, the pallet can be dismantled to save space in the warehouse. This offer applies to a single pallet/base: Commodity code: MTP000276 Length: 154.5 cm Hjdou Trpyjpfx Abzsw Width: 118 cm Bax3Ttyxrfw Height : 31 cm Load capacity : 1500 kg Finish: hot-dip galvanised Price : 82 euros / piece The offer concerns a double pallet /base/ : Commodity code : MTP000283 Length : 202.5 cm Width: 118 cm Height : 31 cm Load capacity : 2000 kg Finish: hot-dip galvanised Price : €120 / piece Each pallet of posts requires 4 cantilever tubes, available in different sizes according to the customer's needs: 120, 150, 200cm. The offer concerns a tube for a Manurack 120×6 cm rack: Product code : MPP000706 Height (cm): 120 Thickness (mm): 2,9 Diameter (cm): 6 Price : 7 euro / piece The offer concerns a tube for a Manurack 150×6 cm rack: Item code : MPP000704 Height (cm): 150 Thickness (mm): 2.9 Diameter (cm): 6 Price : 8,50 euro / piece The offer concerns a tube for a Manurack 200×6 cm rack: Item code : MPP000705 Height (cm): 200 Thickness (mm): 2.9 Diameter (cm): 6 Price : 11,50 euro / piece Prices quoted are for wholesale quantities ( full truckload ) for export outside Poland, please contact us for details. To check wholesale and retail prices within Poland, please contact us. * I have large quantities ... * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: new, Year of construction: 2025, Table milling machine minimax twf 55 es M 3 UP Hjdpfx Abjhp Rc Ijzew Professional workman's machine with motorized height and inclination adjustment of the milling spindle, four speeds and electronic control system Item number 5502266 Brand Holzkraft / SCM EQUIPMENT Equipment Aluminum sliding carriage ✔ Handle at sliding carriage ✔ FLEX ONE routing fence: heavy-duty professional design, automatic adjustment of the entire routing fence depending on the tool diameter, manual adjustment of chip removal, swing-away device, aluminum fence jaws with connecting strips Height adjustment of the spindle motorized. Telescopic miter fence with two folding stops Inclination adjustment of the spindle motorized Cantilever table ✔ Ready 3 control: Programmed movement of the milling unit in two axes, Automatic adjustment of the entire milling stop depending on the tool diameter, Stepless adjustment via switch or automatic positioning system Curved milling protective hood ✔ Position of control elements Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg width/depth (product) approx. 2000mm Connection suction suction connection diameter 2 x 120mm Work table Working table length 1200mm Sliding carriage length 1200mm Working table width 530mm Sliding carriage width 360mm Table height 900mm Slide height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width [...]