Used Cantilever for sale (206)

Condition: used, Year of construction: 1998, Technical details: lifting capacity: 0,25 t lift: 3000 mm span width: 6500 mm height lower edge cantilever arm: 2800 mm swival range : 360 ° total column height: 3240 mm column diameter: 500 mm Tare weight: 30 kg(Kettentrieb) kg protection class: IP 54 connection voltage: 230/400 V stroke speed: 10/2,5 m/min Weight approx.: 0,17 + 0,65 (26 Europaletten 25kg) t Telescopic boom electrically extendable to a reach of 10,000 mm Telescopic speed 10 m/min Operating voltage 380/400 V 50 Hz * Djdpfx Aew Rz Aasfpeun

Condition: used, Year of construction: 2000, Technical details: lifting capacity: 1,0 t Arm length: ca. 5000 mm height lower edge cantilever arm: 3200 mm cantilever arm length from center column: 4500 mm column diameter: 406 mm rotation: 120° ° crane classification: DIN 15018 H2B3 dimensions L x W x H: Kran: 4,62 x 0,62 x 3,5 m dimensions L x W x H: Ausleger: 7,6 x 0,66 x 0,37 m The slewing pillar crane consists of the following main groups: Pedestal boom (transport dimensions L: 7600mm x W: 660mm x H: 370mm) Dedpfxsu Nvmds Afpeun Hoisting gear: Balkancar type MB 093n, lifting height 4 meters; load chain type 7,2 x 21 double chain; hook/buckle with rope safety, pendant control Type 071/53 Slewing operation manual outreach column to crane hook = 4.000mm height of column = 3.200mm; running width on jib = 180mm Column base flange Ø 700mm; pitch circle Ø 520mm, 12 holes Ø 31mm *

Condition: used, functionality: fully functional, Year of construction: 1997, We are offering this used DOOSAN Puma 300C CNC lathe from 2008, currently located in Spain. Available immediately. - Nominal force: 500 kN - Max. eccentric load: 80 kN - Max. bending length: 2000 mm - Table length: 2000 mm - Table width: 60 mm - Table height: 965 mm - Clearance between press beams: 370 mm - Stroke: 100 mm - Cantilever length: 400 mm - Column distance: 1690 mm - Max. pressure: 31.6 MPa - Number of cylinders: 1 - Oil volume: 45 l - Motor power: 6 kW - Max. feed speed: 79 mm/s - Max. working speed: 10 mm/s Duedoyg Ng Espfx Afpjn - Max. return speed: 80 mm/s

Condition: as good as new (ex-display), Year of construction: 2024, Optimum OPTIdrill RD 6 Precise, solid radial drilling machines of top quality. Ideal for versatile use in single-part and series production. • Versatile application range, such as drilling, reaming, and threading • Electrically braked motor • 24V DC electrical system and 2-channel safety chain according to DIN EN 12717 • Heavy, solid, high-quality cast iron • Wide reach thanks to horizontally adjustable machine head • Clearly arranged control panel • Smooth-running swivel and travel axes • Elaborately machined column swivel with optimized clamping for maximum stability and minimal clamping offset • Robust, torsion-resistant boom construction • Boom height adjustment via powerful motor drive and lifting spindle • Drill head gear running in an oil bath • Boom guideways hardened and precision-ground • Chrome-nickel steel gears, hardened and precision-ground, ensuring quiet and smooth operation • Drill head and column can be clamped together or separately or loosened • Right-left rotation • Solid, precise drilling table, generously dimensioned • Hardened and ground clamping table with parallel T-slots • Machine light • Overload protection • Thick-walled cast iron column ensures smooth operation and stability • LED lamp Dedpfx Ajwa Tc Sjfpoun • Coolant system with coolant tank in the machine base RD 6 / RD 7 • Column is hydraulically clamped Dimensions and Weights Column diameter 320 mm Length approx. 2670 mm Width/Depth approx. 1120 mm Height approx. 2760 mm Weight approx. 3200 kg Extension arm Rotation angle 180° Drilling capacity Drilling capacity steel (S235JR) 50 mm Continuous drilling capacity steel (S235JR) 45 mm Drilling table T-slot size 14 mm T-slots Number: 4 T-slot spacing: 180 mm Maximum distance between spindle and drilling table: 1420 mm Clamping table length: 630 mm Clamping table width: 500 mm Clamping table height: 500 mm Clamping table T-slot size: 22 mm Number of T-slots on the clamping table: 3 Clamping table T-slot spacing: 150 mm Min. distance between spindle and clamping table: 0 mm Max. distance between spindle and clamping table: 910 mm Min. distance between spindle and drilling table: 465 mm Speed range: Speed range: 44 – 1023 rpm Number of speed ranges: 12 Electrical data: Total power consumption: 6.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Machine base: Working surface length: 2550 mm Working surface width: 970 mm Motor(s) Spindle motor drive power: 4 kW Drive power Cantilever arm lifting motor 1.5 kW Coolant pump power of drive motor 90 W Hydraulic clamp drive 0.75 kW Spindle Quill stroke 270 mm Spindle mount MT5 Quill feed speed 0.06 – 0.2 mm/rev Quill feed speeds 3 Travel path Drill head travel (horizontal) 1250 mm Arm stroke (vertical) 680 mm Maximum spindle-column distance 1600 mm Minimum spindle-column distance 350 mm

Condition: used, Complete Factory Package for Processing PVC and Aluminium Profiles – Block Sale Includes the following machinery: 1️⃣ Welding and Cleaning Line – ProfteQ QUADOS Including: 4-head welding machine QUAD OS12 + transfer/cooling table + CNC corner cleaning machine FRT9 + automatic loading table 2️⃣ Machining Center – Mecal MC 304 Atlas 4-axis machine equipped with a head for frontal machining, specifically designed for aluminum processing. 3️⃣ Double-head cutting-off machine – FOM ALVA 500A – year 2005 Blade: Ø 500 mm – Blade inclination: external 4️⃣ Cold Saw – ALTECH GOTHA (complete with roller conveyors) Single-head ascending blade saw Ø 600 mm, blade tilting -45° / +45°, blade rotation with digital angle display. 5️⃣ Glazing Bead Cutting Machine – RobTech MAESTRO Designed for cutting aluminium and PVC glazing bead profiles with four blades positioned at 45°. 6️⃣ Single-head cutting-off machine – MG TLG 350 Blade Ø 350 mm – Table rotation: 45° - 0° - 90° Dodpfxev Ig Hho Afpoun 7️⃣ Two-Head Drilling Machine – FOM 8️⃣ Vertical Assembly Bench for Glass and Glazing Beads – ProfteQ BV7 + Bench – Rotox VPAH 3023 9️⃣ Assembly Table – FOM 🔟 Double-Sided Cantilever Rack – 1 Block (9 Shelves per Side) (Multiple units available). 11️⃣ Electric Forklift – Career R30N S (4 wheels) Capacity: 3,000 kg, complete with side-shift. 12️⃣ Electric Order Picker – OM XOp Capacity 1,200 kg, lifting height 6,725 mm, fork length 800 mm.

Condition: new, - new -Description:- Saw blade tilt and height adjustment is manual- Max. Cutting height 200mm- Scoring device with separate drive motor- Main saw blade with belt drive and speeds 2800/3665/4800 min¯¹- High dead weight ensures vibration-free running- Large cantilever table with material roller- Rip fence with round bar guide- Extendable aluminum longitudinal fence with two folding stops- 7,5 kW main motor mounted on robust cast iron frame- Quadruple bearing format sliding carriage with double roller carriage made of anodized aluminum with high torsional rigidity- Multiple locking device on sliding table- Standard with table widening and table extension made of sheet steel- Large pendulum protection hood conveniently swivels up with the help of a gas pressure spring- Saw blade clamping via tool-free Rapid systemTechnical data:Dimensions and weightsLength approx. 3386 mmHeight approx. 1330 mmWidth/Depth approx. 3703 mmWeight approx. 1102 kgConnection suctionSuction port diameter 120 mmSuction port diameter saw blade guard 80 mmElectrical dataSupply voltage 400 VInput power 8,3 kWMotor speed 2800 min¯¹Mains frequency 50 HzOutput power 7,5 kWSliding carriage and tableFormat sliding carriage length 3200 mmFormat sliding carriage height 890 mmTable width 685 mmFormat sliding carriage width 416 mmTable length 1255 mmTable height 890 mmNoise emissionSound pressure level 96,5 dB(A)Circular saw unitCutting width with rip fence 1450 mmSaw blade inclination 90 - 45°Max. Cutting height 45°140 mmSpeed of saw blade 2800/3665/4800 min¯¹[Max. Cutting width to the left of the saw blade 3200 mmMax. Cutting height 90° 200 mmDiameter saw blade 550 mmScoring unitDiameter scoring saw blade 120 - 130 mmSpeed scoring saw blade 8000 min¯¹Item no.: 5200550 Duedpfevxr Rgox Afpen

Condition: used, Technical details: lifting capacity: 1,0 t Arm length: 3500 mm height lower edge cantilever arm: 3900 mm cantilever arm length from center column: 3750 mm lifting height max. hook position: 4000 mm column diameter: 400 mm total power requirement: 0,76 kW dimensions L x W x H: aufgebaut: 4,2 x 0,84 x 4,25 m Column-mounted slewing crane with small foot flange octagonal 750 x 750 x 21mm - operation floor-operated pendant control - slewing electric/motor driven - jib LxWxH: 4100 x 125 x 300mm The crane is equipped with a new electric chain hoist STAR LIFTKET 1,0 to with electric trolley. Type 1000/2-4/1 Design 1000/2-4/1; lifting height 4.0m, lifting speed 4/1 m/min. Duodpfx Aju Nxnksfpen Function: electric driving on carrier, up and down, as well as swiveling. without clamping plate! *

Condition: used, Year of construction: 1978, Technical details: bore capacity in steel (diameter): 100 mm arm length: 400 - 2100 mm cantilever adjustment vertical: 100 mm spindle taper MT: 50 drill depth: 415 mm spindle stroke: 400 (Skala) mm column turnable: 360 ° column diameter: Ø 500 mm distance drilling head - clamping area: min./max.: 400 / 1.800 mm number of spindle speeds: 12,5 ... 1.600 / 15 step U/min Dsdpju Id Awjfx Afpeun feed: 0,063 ... 2,5 / 15 step mm/U table clamping surface:: L x B: 2.000 x B: 950 mm total power requirement: ca. 35 kW weight of the machine ca.: o. Würfel = 8,0 t dimension machine xH: 3,40 x 1,16 x 3,51 m further information: - drilling spindle travel horizontal 1.700mm Equipment: - incl. drilling cube (horizontal surface: 1000 x 1000 x 500 mm, central bore Ø 35mm; 6 T-slots), (vertical surface: 1,000 x 500mm, 3-T-slots) - control panel - coolant system *

Condition: used, Year of construction: 1976, Technical details: bore capacity in steel (diameter): 32 mm arm length: ./x. . 400 / 50 mm drill head horizontal traverse: 400 mm drilling head vertical adjustable: 400 mm bore spindle stroke: 150 mm spindle taper MT: 4 grinding spindle speed: 100 - 2000 U/min Arm length: Spindel: min./max: ca. 400 / 50 mm cantilever adjustment vertical: 850 mm cantilever adjustment horizontal: 400 mm arm: Länge: 1360 arm horizontal: schwenkbar mm/min number of revolutions per minute of drill spindle:: 100...2 step U/min. feed steps: 0,1 / 0,2 / - step mm/U Table dimensions: 00 x 510 mm distance table - lower edge spindle: min./max.: 350 / 800 mm total power requirement: 2,4 kW Duodpfx Afswi Iqvspen weight of the machine ca.: 1,8 t dimension machine xH: 1,3 x 1,3 x 2,25 m Equipment: 2x foot rail Attachment option for a vertical table Accessories: Various clamping devices *

Condition: excellent (used), functionality: fully functional, For sale is an extensive, complete scaffolding lot suitable for professional building construction and façade work. System Façade Scaffolding Working Scaffold Reinforcement Scaffold Eaves-Side Scaffold Ideal for scaffolding companies, construction businesses, or for expanding existing scaffolding inventories. The material is systematically listed and registered. Numerous additional components are included. System: SL 70 / SL 100 Total area: approx. 8,000 m² scaffold surface Total weight: approx. 105,000 kg Main components included (excerpt): Dusdjycfyyspfx Afpon Frames & Supports: SL 70 Vertical Frames: 200 × 70 / 150 × 70 / 100 × 70 / 50 × 70 SL 100 Vertical Frames: 200 × 100 / 100 × 100 Decks & Platforms: Wooden Decks: 300 × 32 / 250 × 32 / 200 × 32 / 150 × 32 / 100 × 32 / 70 × 32 Steel Decks: 300 × 32 / 150 × 32 Guardrails & Safety: Rear Guardrails: 300 / 250 / 150 Double-Sided Guardrails SL 70 / SL 100 Side Guardrail Frames SL 70 / SL 100 Guardrail Post Supports / Guardrail Posts Top Deck Safety Barriers Diagonals & Bracing: Diagonals 300 × 200 Diagonals 250 × 200 Accessories & Special Parts: Toe Boards: 300 / 250 / 150 Adjustable Base Plates: 30 / 50 / 60 / 80 Spacers / Distance Tubes Roof Edge Protection SL 70 / SL 100 Weather Protection Roof ALU Access Hatch Decks with Ladder Cantilever Beams: 32 / 64 / 74 Alu-Staircase + Guardrail 2.50 m 610 Steel Lattice Beams Couplers (Swivel / Right-Angle Coupler) A detailed parts list is fully available (see photo). Further accessories available. Condition: Used, fully functional System-compatible scaffolding material Suitable for professional construction site use Location: On request Inspection: By appointment Loading & transport can be organized Sale preferred as a complete lot or in large batches

Condition: used, Cantilever racking, heavy duty racking Dusdpfx Asd Eqlpefpen consisting of: -Shelf: with 2 stands each -Support arms: double-sided -6x ledger depths: 900/500/400/300/230 mm -welded -Also: other quantities and heights available on request -Number: 1x shelves available -Transport dimensions: 2100/2020/H2170 mm -Own weight: 430 kg/piece

Condition: used, functionality: fully functional, Conical mixer steel gross 5000 litres net 3500 litres (70%) 2 outlets: 1x bottom outlet with original ball segment, 1x side outlet with slide gate valve (position for lump breaker) Duedpjydu Uvofx Afpjn cantilevered mixing screw operates well (dismantled after factory shutdown) including base frame

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 820 x 1365 mm 165 kg mobile extraction, welding fume extraction (manual cleaning by loss of pressure) - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Aluminum in case of heavy smoke development. She corresponds to the Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan ensures a high volume flow even with saturated filter cartridges. Dusdjkm Rynjpfx Afpsn The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW Dsdpfjhp S Trjx Afpoun filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 900 h, Main Drive Number of axis 3 This 3-axis Flow MACH 100-4020 was manufactured in 2021, featuring a cutting area of 4020 × 2020 mm and a cantilever structure. It includes a FlowMaster® license, Flow PASER® 4 cutting head, and a Hyplex Prime 30 pump with a maximum pressure of 4,150 bar. Ideal for abrasive waterjet cutting with less than 800 operating hours. If you are looking to get high-quality cutting capabilities, consider the Flow MACH 100-4020 machine we have for sale. Contact us for more information. Application Types Dujdox Sz A Rjpfx Afpsn Cutting

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. Dedpfx Afoh R Taqepjun According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing Duedpfemhhy Nox Afpon - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 1313, Intended Use The automatic high-performance longitudinal circular saw KMS is designed for precise finish and joining cuts. It features a robust, durable construction and is engineered for continuous industrial operation in wood, plastic, or metal processing applications. Machine Design - Sturdy, welded heavy-duty steel construction. - Motor protection switch with automatic star-delta start-up. - Carriage guidance via precision-ground round steel rails and ball-bearing rollers; rails are mounted on easily replaceable supports. - The entire carriage unit is positioned beneath the front machine table. Sawing Unit - Lowerable circular saw unit, electro-pneumatically lifted. - Cutting height adjustment manually via a threaded spindle. - Infinitely variable feed rate from 1–60 m/min, powered by a frequency-controlled motor. - Return speed constant at 60 m/min, independent of feed rate. - Cutting length adjustment for varying cut lengths via selector switch. Machine Table - Front machine table made from reinforced longitudinal beams, adjustable and mounted for stability. - Table surface constructed from profiled steel sheets with recessed grip handles. - Cantilevered width stop, seated and guided on three sides. - Spindle drive with fine adjustment via handwheel, directly readable scale. - Usable width: 400 mm (standard version). - Electro-pneumatically controlled fence rail with automatic retraction for unobstructed drop of cut material. - Rear machine table is narrow and can be swiveled downward electro-pneumatically for free fall during longitudinal cuts. Saw Blade and Extraction - Designed for saw blades Ø 400 mm, bore Ø 30 mm, mounting flange Ø 80 mm. - Maximum cutting height: 70 mm. - Integrated extraction duct, Ø 150 mm. Dodpfxsrt H Ddj Afpjun Double Circular Saw Unit “DUO” - For pre- and post-cuts, consisting of two saw blades Ø 400 mm and two 11 kW (15 HP) motors each. - Total cutting length: 3200 mm. - Pressure beam with torsion-resistant construction and parallel guidance, stroke movement electro-pneumatically controlled. - Integrated finger safety contact bar.

Year of construction: 2009, condition: used, Apple 15 head depositor Duedpfxob Ucwks Afpsn Model: CCP12 Stainless cantilever framed 15 head machine

Condition: new, Year of construction: 2025, Table milling machine minimax twf 55 es M 3 UP Professional workman's machine with motorized height and inclination adjustment of the milling spindle, four speeds and electronic control system Item number 5502266 Brand Holzkraft / SCM EQUIPMENT Equipment Aluminum sliding carriage ✔ Handle at sliding carriage ✔ FLEX ONE routing fence: heavy-duty professional design, automatic adjustment of the entire routing fence depending on the tool diameter, manual adjustment of chip removal, swing-away device, aluminum fence jaws with connecting strips Height adjustment of the spindle motorized. Telescopic miter fence with two folding stops Inclination adjustment of the spindle motorized Cantilever table ✔ Ready 3 control: Programmed movement of the milling unit in two axes, Automatic adjustment of the entire milling stop depending on the tool diameter, Stepless adjustment via switch or automatic positioning system Curved milling protective hood ✔ Position of control elements Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg width/depth (product) approx. 2000mm Connection suction suction connection diameter 2 x 120mm Work table Working table length 1200mm Sliding carriage length 1200mm Working table width 530mm Sliding carriage width 360mm Table height 900mm Slide height 142mm Dsdohp Rc Ijpfx Afpoun Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width [...]

Condition: new, Year of construction: 2025, Woodworking machinesTable routers Minimax twf55 es Item number: 5502261 Sturdy cast steel construction Anodized aluminum sliding carriage Large dimensioned milling unit made of grey cast iron, swivels up to -45° to the rear Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Height and inclination display accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress relieved and re-annealed for lasting precision Powerful 5.0 kW industrial motor Curved milling hood included in delivery Made in Italy Dimensions and weights Length (product) approx. 1200mm width/depth (product) approx. 2000mm Weight (net) approx. 510kg Connection suction suction connection diameter 2 x 120mm Work table working table length 1200mm working table width 530mm table height 900mm sliding carriage length 1200mm Slide width 360mm Djdpsi Dphtsfx Afpjun Slide height 142mm Installation information Required space length 2800mm Space requirement width/depth 2910mm Explanation of space requirements The dimensions take into account maximum travels or useful lengths. Machine body length 1200mm Machine body width/depth 846mm Working area length 1600mm Working area width/depth 2300mm Explanation of working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Milling spindle spindle inclination 0 to -45 useful length of the spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ Milling spindle speed indicator LED on the front of the machine spindle arbor diameter 30mm Milling tool diameter max. Tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 240mm Tool diameter max. tenon milling 320mm EQUIPMENT Equipment Aluminum sliding carriage ✔ Milling fence Heavy-duty professional version with hold-down device, protective cover and aluminum milling fence jaws Telescopic miter fence with two folding stops Cantilever table ✔ Curved milling protective hood ✔ Eccentric clamp ✔ Handle on sliding carriage ✔ Height adjustment of the spindle manually Tilt adjustment of the spindle manual Control manual height and tilt adjustment of the milling unit Position of the control elements on the machine body location: ex stock 54634 Bitburg - immediately available -

Year of construction: 2022, condition: new, Altendorf WA 6 manual height adjustment, double roller carriage length 2000 mm scoring unit, swiveling, cantilever table, angular miter fence, automatic brake, lowerable below table height ----- Technical data ----- Swivel range: 0 - 45 °, Duodpfx Aoihahmjfpsn cutting width at rip fence: 1.000 mm, max. cutting height: 87 mm, max. saw blade Ø: 315 mm, Swivel range miter fence: up to 49 °, Speeds: 4,200 rpm, Engine power main motor: 5.5 hp / 4 kW, motor power scoring motor: 0,5 hp / 0,37 kW, Working table height: 910 mm, suction nozzle Ø: 1 x 100 / 50 mm each, weight: 450 kg Large suction hood Location: Ex stock 54634 Bitburg - immediately available - Location: Ex stock 54634 Bitburg - free on truck - - immediately available -

Year of construction: 2012, condition: good (used), machine/vehicle number: ENOG, DEMAG KBK crane headliner crane runway dimensions approx. 8x4m Payload / lifting load 250 KG - 0.25to Technical data of the system: Crane runway made from Demag KBK1+2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. incl. Demag DC-COM 250KG chain hoist Crane is dismantled and available immediately Djdpfx Ajmqf Nfefpsun Used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2022KL2938, total width: 2,400 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 900 kg, warranty duration: 12 months, • Glass cutting table SDRD FULL Dedpfx Afsh Nx R Tepoun Tilted table which supports the process of manual cutting the glass, product designed and manufactured in Poland Length - 3400 mm Width - 2400 mm Height - 910 mm Breaking bar - 2 pieces in cross arrangement Bars steering - by foot pedals Air cushion system - installed Power of fans (air cushion) - 2,2 kW Air cushion system steering - by foot pedals and hand button Tilting of the top - pneumatical Stabilization of tilting - by hydraulic speed controller Support of quick tilting - by to gas springs Pull-out cantilevers of glass loading - yes, manually Covering of the top - grey felt Covering of the circumference - ash slats Wheels - 4 rotary, with increased load Levelling feet - 4 pieces installed Steel construction covering - polyurethane covering Filling of the lower beam in stationary construction - vibrated, fibre reinforced concrete Table available from stock. Our company also delivers worldwide.

Condition: used, Year of construction: 2003, functionality: unexamined, carrying capacity per cantilever arm: 1,000 kg, load capacity per stand: 4,000 kg, We are offering this used G. SIMON & Co cantilever heavy-duty racking system, year of manufacture 2003. Type: Order No.: 2953 Year of manufacture: 2003 Maximum load per arm: 1,000 kg Maximum load per side (upright): 4,000 kg If you have any questions or require further information, please feel free to send us a message or call us. For sale is a heavy-duty double-sided cantilever rack from G. SIMON & Co. Lagertechnik (built in 2003). Ideally suited for the storage of long goods such as pipes, profiles, bar stock, strips, panels, etc. The racking is of robust construction and designed for heavy loads. Technical data: Manufacturer: G. SIMON & Co. Lagertechnik (Hamburg) Year of manufacture: 2003 Dedpfex Stcpex Afpsun Order No.: 2953 Version: double-sided Cantilever arms: approx. 8 per rack (4 per side) Load capacity: 1,000 kg per arm Max. load capacity: 4,000 kg per upright side Scope of delivery: 1x double-sided cantilever rack incl. approx. 8 cantilever arms (scope of delivery according to photos/listing). Note: Dimensions (height / arm length / bay length) available on request or after measurement.