Used Carousel for sale (155)

Condition: used, Year of construction: 2011, Used 2011 Hardinge plied with 8000 RPM Spindle, 30 station ATC, Swarf conveyor, coolant equipment & manual set. SPECIFICATION: TRAVELS: X Axis 1020 mm, Y Axis 540 mm, Z Axis 540 mm Spindle Nose to Table (~ max) 685 mm, Spindle Nose to Table (~ min) 145 mm TABLE: Length 1120 mm, Width 540 mm T-Slot Width 18 mm, T-Slot Centre Distance 160.0 mm, Number of Std T-Slots 3 Max Weight on Table (evenly distributed) 700 kg Knjdpfsvq Ry Djx Aabjc SPINDLE: Max Rating 17.4 hp 13 kW, Max Speed 8,000 rpm, Max Torque 82.76 Nm, Drive System Direct Speed Belt Drive, Taper BT 40, Bearing Lubrication Air/Oil Injection Cooling Air Cooled FEEDRATES: Rapid and Jog (Max.) 36 m.min Cutting Feed Rate (Max.) 12 m.min AXIS MOTORS: Axis Motor Rating X Y Z - 2.29 12,29 3.3 KW TOOL CHANGER: Type Carousel, Capacity 20 Max tool diameter 89 mm Tool length Max. 250 mm Tool weight Max. 6 kg Tool change time 6 sec GENERALS: Air Required 4 scfm, 700 psi /min Power supply 45A FLA / 400 v / 3 phase Coolant Capacity 360 L Control: Siemens 828D Spec: Travel X 1020 Y 540 Z 540 mm | Max spindle RPM 8,000 | BT40 Accessories: Swarf conveyor, Coolant equipment, 20 tool ATC

Condition: excellent (used), Here we offer a KUKA robot with control unit. KUKA robot VKR 16 R1610-2 Control unit VKRC4-SC5 KUKA smartPAD hand-held programming device Robot comes from school and Research Department Kodpfjd H E H Rex Aabonc Hour meter first. 226,25 Axis data: Range of motion A1 ±185 ° A2 185 ° / 65 ° A3-138 ° / 175 ° A4 ±350 ° A5 ±130 ° A6 ±350 ° Speed at nominal load A1 200 ° / sec A2 175 ° / s A3 190 ° / s A4 430 ° / s A5 430 ° / s A6 630 ° / s Technical data: Maximum range 1612 mm Maximum load 20 kg Nominal payload 16 kg Nominal payload carousel / arm / arm 0 kg / 0 kg / 10 kg Repeatability (ISO 9283) ± 0.04 mm Number of axes 6 Installation location ground; Ceiling; Wall; any angle Footprint 430.5 mm x 370 mm Weight 245 kg Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you.

Condition: good (used), Year of construction: 2008, DMG DMC 60 T RS3 Universal 5-Axis Machining Center • Manufacturer: DMG • Model: DMC 60 T RS3 • Machine No.: 1143 000250 3 • Year of Manufacture: 2008 • Control: HEIDENHAIN MillPlus IT • Condition: o Power-On Hours: 42,603 o Spindle Hours: 20,137 Travel Range: • X: 780 mm • Y: 560 mm • Z: 560 mm Specifications: • Spindle Speed: 12,000 rpm • 60-Position Tool Changer – SK 40 • NC Rotary Table with Pallet Carrier • NC Swiveling Milling Head (B-axis) • Rotary Pallet Changer • RS3 Pallet Carousel for 4 Pallets (630 x 500 mm) • Total of 5 Pallets • BLUM Laser • BA 4 • 3D Touch Probe TS641 • Air Blast • Chip Conveyor • Through-Spindle Coolant (IKZ) 40 bar • Coolant Tank: 900 Liters • ROTOclear Knsdpfxjwp T Nwo Aabsc

Condition: ready for operation (used), Mazak Nexus VCN 410A Vertical Machining Centre Mazatrol NEXUS 640m Control Manufactured & Installed in 2003 Kitigawa 4th Axis Lang mounted 3 Jaw Chuck 30 Station Too Carousel 12k Spindle Machine Capacity: Table Size: 900 x 410mm X Axis Travel 560mm Y Axis Travel 410mm Z Axis Travel 510mm Rapid Traverses 36000m/min Kedpfjw Rrzgox Aabenc Spindle: Spindle Speeds – 12,000rpm Tool Shank CAT-40 Tool Storage Capacity 30 Tools Spindle Power 18.5kW For sale with Jet Machinery Ltd Jet Machinery Stock No: #78832 Machine Serial Number: 164742 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.  

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, A used CNC portal milling machine with carousel turning unit / C-axis for turning Hirth gearing TRAVEL PATHS X: 3,000 mm Y: 2,500 mm Z: 1,000 mm Table diameter: 2,000 mm Max. turning diameter: 2,500 mm Max. turning height: 1,000 mm Machine: Uniport 6000 Boring work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. C-axis for turning New price: €1.8 million Dismantling: by arrangement Ksdpevvh T Ssfx Aabsnc The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then the rotary attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this by 2.5° each time over the Hirth gearing. All holders (milling, turning, angle head) are clamped via HSK-100. A radio measuring probe from M&H (Hexagon) for measuring and probing the zero point is included with the machine. The machine is in operation and can be viewed on site. A video of the machine is available.

Condition: good (used), Roche MagNA Pure LC Nucleic Acid Preparation Station Description of the manufacturer, all data without guarantee. Services Save time with fast, fully automated isolation of high-quality DNA, RNA and mRNA. Get reliable, reproducible results. Benefit from high flexibility in sample type and volume as well as elution volume and post-elution processes. Benefit from software-assisted set-up of reagents and disposables. Automated pipetting of PCRs into LightCycler ® capillaries (LightCycler ® sample carousels ), LightCycler ® 480 multi-well plates (96-well), PCR plates or strips or tubes. Product description Kjdeh Dpxhopfx Aabjnc The MagNA Pure LC instrument is a benchtop instrument for rapid, cross-contamination-free nucleic acid preparation and PCR setup. A fully enclosed housing, automatic clot and tip loss detection and sample tracking make the MagNA Pure LC instrument a true "walk-away" instrument. Filtration, centrifugation and other manual steps are completely eliminated. No vacuum pumps or tubing are required. With the piston-driven 8-channel nozzle head and liquid handling with direct displacement, the risk of cross-contamination is reduced to an absolute minimum. The UV decontamination and HEPA filter system ensure maximum safety for samples and the environment.  Item condition: used untested Scope of delivery as shown Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1990, Kardex vertical carousel shelving Type: Kardex Device no.: not legible Year: 1990 Device height: approx. 5,920 mm Device width: approx. 3,010 mm Device depth: approx. 1,250 mm + 300 mm tabletop Knsdsw E Hh Eepfx Aabsc Number of trays: 40 Tray width: approx. 2,500 mm Tray depth: approx. 400 mm Tray height: approx. 235 mm Compartment load: 250 kg Total load: 10,000 kg Color: White

Condition: used, Rounding machine tool WemaProbst RHM 200 Kedpfx Aov Ii Tkeabsnc

Condition: new, Type SX1325AP-2128 Axis: Useful working area axis X-Y-Z 2070-2800-100 mm Pieces clearance in Z 100 mm Max. traveling speed 70 m/min Max. working speed 30 m/min Working table: Phenolic multifunction Nr. of stops standard 10 (4X-6Y) Vacuum pump 4*5,5 kW(50/60 Hz), air cooled Kedpjdz Edqefx Aabonc Electrospindle: Standard power (S6) 9,5 kW, ISO30 Max. speed 24 000 rpm Tool changer: ATC carousel for 12 positions Lubrication: Automatic centralized lubrication Installation: Installed power 22-33 kW Compressed air cosumption 450 NL/min Extraction air consumption 3000 m3/h Extraction air speed 25 m/sec Suction hood diameter 2x150 mm Made in China Weight 3500 kg

Year of construction: 2025, condition: new, Carousel table dedicated for product accumulation at the end of the line Height - 900mm, adjustable 50mm Diameter - 1150mm Load - 70kg Rotation - 9rev./min Materials used: stainless steel AISI304, food grade ALU and PE Castor wheels with brakes Available on stock Condition: New with warranty Kjdpfoic Rg Rsx Aabonc

Condition: as good as new (ex-display), Deburring machine for deburring and all-round edge rounding of punched laser waterjet and flame-cut parts part thickness from 0.5 --100mm Max part width 600mm Smallest parts 40x40mm Machine with wide belt pre-grinding station for high burr or surface finsh Rotary brush carousel for edge rounding Wide belt grinding station after the rotary brushes for surface finishing Easy handling Quick tool change for material mix steel and VA Extremely long tool life 100 % uniform result on all sides With associated wet suction Knedpfegg Eq Hsx Aaboc Machine can be inspected and tested by arrangement

Condition: used, Set of machines for the production of beverages in 5-liter PET bottles. 1) RIVI 24 carousel filling machine - machine modernized in 2013 - previously used for 1.5 L bottles (24 fillers) - number of filling heads: 12 pcs (for 5 L bottles) - capacity: approx. 1800 bph 5 L 2) ZALKIN 4 PET bottle capper - number of closing heads: 4 pcs - capacity: approx. 2000 bph Used machines, functional at the time of dismantling. Complete original technical documentation. Kodpsu I N Npofx Aabonc Other offers also include semi-automatic blow molding machines for 5 L PET bottles, compressors and bottle labelers. .

Condition: excellent (used), Fladder SC 300 finishing and brushing machine Year of manufacture 1995 Manufacturer Fladder System Denmark Carousel working height 800 mm Working width 1200 mm Passing speed 0.3 - 10.0 m/min. Automatic pneumatic presses Main motor 7.5kW Number of spindles 6 Rotary motor 0,37kW Knjdpfxor Eri Ae Aabjc Carousel motor 0,55kW

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Working area: 2700 x 1250 mm Z-axis travel: 160 mm Rotary axis: C-axis Spindle motor power: 8.5 kW Spindle speed: 24,000 rpm Tool changer (carousel): 8 tools (auxiliary magazine) Main tool magazine: 10 tools Saw unit along X and Y axes Vertical drills along X-axis: 8 pcs Vertical drills along Y-axis: 5 pcs Horizontal drills along X-axis: 4 pcs Horizontal drills along Y-axis: 4 pcs Tool holder type: HSK 63 Central lubrication pump Vacuum raster table Edge milling unit along X-axis Knjdpfxswp R Eis Aabec Year of manufacture: 2011

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, workpiece diameter (max.): 160 mm, rotational speed (max.): 300 rpm, workpiece length (max.): 25 mm, TECHNICAL DETAILS Description: Hydraulic internal rolling machine for tapered or cylindrical back rolling of profiles on sliding sleeves, sliding gears, or similar parts. Workpiece Data Workpiece diameter: 160 mm Workpiece length: 25 mm Workpiece internal gearing, adjusted approx.: 85 mm Workpiece external: 75 - 140 mm Workpiece width approx.: 16 - 36 mm Workpiece external pressure ring, adjusted: 160 mm Travel and setting data Maximum travel of the rolling carriage: 60 mm Ksdpswmb Rkefx Aabsnc Center distance between workpiece and rolling wheel: 22 mm Rolling wheel speeds, continuously adjustable: 30 - 300 rpm Rolling pressure, continuously adjustable (at 100 bar): 6.1 t Control system: SIEMENS PLC Monitoring control: LAUER PCS 900 / BRANKAMP C 90 with screen display MACHINE DETAILS Machine weight approx.: 4,500 kg Space required approx.: 2.5 x 2.5 x 2.1 m Spindle drive approx.: 6 kW Total drive: 14 kW Total power requirement: 14 kW Operating voltage: 400 V Frequency: 50 Hz EQUIPMENT - Workpiece carousel loading device for 18 workpieces with workpiece inspection station - Workpiece transport device - Changeover time to a different workpiece size: 30 min / Machining time per workpiece approx.: 25 s - Workpiece storage for intermediate storage - Separate hydraulic system - Separate control cabinet - Coolant system Note: Working areas are approximate and depend on the workpiece and tool conditions.

Year of construction: 2025, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_29, Electric pressing machine P1S-10 of the PRESSONE series by CoastOne from Finland with spindle drive. Kodpfx Aajwhmq Ssbenc PressOne P1S-10 100kN pressing force 120mm/s feed speed 200mm/s opening speed Tool carousel for 4 lower tools Tool case with 22 pressing tools Laser pointer Work light Side holder with color boxes TC12 touchscreen control 36 month guarantee

Condition: used, Year of construction: 2008, Orbital belt sander Ksdpfswpq Epex Aabsnc Carousel system for sanding the ends of parts 380V

Condition: used, Year of construction: 1997, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 76, workpiece weight (max.): 20 kg, power: 70 kW (95.17 HP), total length: 6,000 mm, total width: 3,500 mm, total height: 2,300 mm, input voltage: 400 V, air pressure: 6 bar, suction capacity: 12,000 m³/h, 1) Camam machine 1997y - 2x inside x 2x outside moulder (11kW motor) - 2x inside x 2x outside paper sanding (5kW motor) total power 74 kW 2) Camam machine 2002y - 2x inside x 2x outside moulder (11kW motor) - 1x inside x 1x outside paper sanding (5kW motor) total power 60kW Machine suitable for bended elements (ex backrests), narrow longitudinal elements (legs), Kedpev Unhgjfx Aabonc pieces height 120 mm, depth 65mm, rotation speed 8m/min

Year of construction: 2015, operating hours: 10 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN 15101588 SP 082988, Thermo Scientific Dionex ASE 350 Automatic Sample Extractor for High-Performance Extraction of Solid Samples at High Pressure and High Temperature Thermo Scientific Dionex ASE 350 Automatic Sample Extractor is equipped with a carousel for 24 extraction cells with a volume of 1 to 100 ml, a carousel for 60 ml and 250 ml collection containers and a solvent organization module. Additional equipment offered with the extractor: - Extraction cells with a volume of 22 ml – 6 pcs. - Bottles for solvents with a volume of 2 l – 2 pcs. - Bottle connections with caps – 2 pcs. Date of purchase: December 2015 The ASE 350 system is a fast extractor that simplifies work in almost any application requiring extraction from soil, sediments or plant or animal material. 1. The extractor weighs 65 kg. A suitably stable laboratory table must be provided. 2. The ASE 350 extractor is powered by 230 V, 50 Hz. The required fuse is 16 A. Ksdpfxewm Ario Aabenc 3. Nitrogen with a purity of 99.99% is required to ensure proper operation of the extractor. The reducer should allow the output gas pressure to be set within the range of 1.03-1.38 MPa. 4. Optionally, in addition to nitrogen, air can be used to control the pneumatics of the device. The air should be 99.99% pure. The air source should allow the output gas pressure to be adjusted within the range of 0.4 MPa to 0.8 MPa. NOTE: AIR DOES NOT SUBSTITUTE FOR NITROGEN, WHICH IS NECESSARY, AIR CAN BE REPLACED WITH NITROGEN. 5. Dimensions: 750 x 600 x 700 mm (width x depth x height).

Condition: used, Year of construction: 2005, Overview  This cold glue labelling machine was manufactured in 2005 by German company HEUFT. The machine is no longer in production use and is now available for sale. It includes two integrated laser coders for date marking and supports a wide range of bottle formats. Ideal for high-speed beverage production environments. Technical data  Capacity: Up to 60,000 bottles per hour Formats: Supports 11 bottle formats From 0,3l - 0,66l Steini, NRW, Longneck Container types: Glass, not transparent, non-contoured Container diameter: 60.4 – 69.1 mm Container height: 174 – 270 mm Label positions: Front (up to 2 labels) Back (up to 1 label) Label size range: Width: 70 – 111 mm Height: 33 – 100 mm Band height: 1100 mm Max. ambient temperature: 40°C Power connection: 400 V Machine design: Straight version, size L (approx. 3360 mm wide) Bottle carousel diameter: 1610 mm Number of bottle plates: 42 Bottle rotation in carousel: Mechanical Guide star diameter: 690 mm Labelling stations: 2 x Cold glue labelling stations 8 glue pallets 9 gripper positions Automatic magazine feeding Scope of Delivery  1 x Labelling Machine | HEUFT | TORNADO | 2005 Including: 2 x Integrated Laser Coders | Bluhm Complete labelling setup with format parts for 11 bottle formats Cold glue stations, glue pallets, gripper arms, and automatic magazine Technical documentation Kodjwd Uk Sjpfx Aabjnc

Condition: good (used), Year of construction: 1991, Fladder SC 300 / 1000 finishing and brushing machine Year of manufacture 1991 Manufacturer Fladder System Denmark S/N 560 Ksdpfxjkwcxys Aabonc Machine height 2210 mm Machine width incl. carousel 4000 mm Machine length incl. carousel 4500 mm working height carousel 800 mm Working width 1200 mm Max. Workpiece height 100 mm throughput speed 0,3 - 10,0 m/min. lock-itTM spindles and length 6 x Ø100 x 350 mm Voltage 3 x 400/500V - 50/60Hz Max./min. Fuse 32 A Max. Power consumption 15 kW Suction 2500 m3/h Net weight 1700 kg

Year of construction: 2025, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_27, Electric pressing machine P1S-10 of the PRESSONE series by CoastOne from Finland with spindle drive. PressOne P1S-10 100kN pressing force 120mm/s feed speed 200mm/s opening speed Knodpfxjvnrczo Aabec Tool carousel for 4 lower tools Tool case with 22 pressing tools Laser pointer Work light Side holder with color boxes TC12 touchscreen control 36 month guarantee

Condition: used, Year of construction: 2004, Bottling Blower, PET Blowing Machine KRONES Including (preform tipper, preform hopper, preform unscrambler, chiller, air conveyors for bottle transport, year 2004) Model: Contiform S8 Kedpfx Aaewuyt Tobjnc Year: 2004 Speed: 13,600 BPH Number of cavities: 8 Machine dimensions: Carousel 2000 mm x 2000 mm x 3000 mm (h) Oven 4000 mm x 2000 mm x 3000 mm Safety protections

Condition: used, Year of construction: 2004, HARE 8 HPIT INDEXING TABLE ASSEMBLY PRESS MAKE HARE, MADE IN ENGLAND MODEL 8 HPIT YEAR 2004 STROKE LENGTH 100.0 mm CAROUSEL 6 STATIONS PLUS 6 STATION AUTOMATIC CAROUSEL 8 TONS HYDRAULIC RAM SICK LIGHT GUARDS Knedpfxewb E Tfs Aabjc FULL SET OF MANUALS

Year of construction: 2025, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_28, Electric pressing machine P1S-10 of the PRESSONE series by CoastOne from Finland with spindle drive. PressOne P1S-10 Kodpfxsvnrc Uo Aabjnc 100kN pressing force 120mm/s feed speed 200mm/s opening speed Tool carousel for 4 lower tools Tool case with 22 pressing tools Laser pointer Work light Side holder with color boxes TC12 touchscreen control 36 month guarantee