Used Carousel for sale (155)

Year of construction: 2015, operating hours: 10 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN 15101588 SP 082988, Thermo Scientific Dionex ASE 350 Automatic Sample Extractor for High-Performance Extraction of Solid Samples at High Pressure and High Temperature Thermo Scientific Dionex ASE 350 Automatic Sample Extractor is equipped with a carousel for 24 extraction cells with a volume of 1 to 100 ml, a carousel for 60 ml and 250 ml collection containers and a solvent organization module. Additional equipment offered with the extractor: - Extraction cells with a volume of 22 ml – 6 pcs. - Bottles for solvents with a volume of 2 l – 2 pcs. - Bottle connections with caps – 2 pcs. Date of purchase: December 2015 The ASE 350 system is a fast extractor that simplifies work in almost any application requiring extraction from soil, sediments or plant or animal material. 1. The extractor weighs 65 kg. A suitably stable laboratory table must be provided. 2. The ASE 350 extractor is powered by 230 V, 50 Hz. The required fuse is 16 A. 3. Nitrogen with a purity of 99.99% is required to ensure proper operation of the extractor. The reducer should allow the output gas pressure to be set within the range of 1.03-1.38 MPa. 4. Optionally, in addition to nitrogen, air can be used to control the pneumatics of the device. The air should be 99.99% pure. The air source should allow the output gas pressure to be adjusted within the range of 0.4 MPa to 0.8 MPa. NOTE: AIR DOES NOT SUBSTITUTE FOR NITROGEN, WHICH IS NECESSARY, AIR CAN BE REPLACED WITH NITROGEN. Dedpfx Adowm Arijdjla 5. Dimensions: 750 x 600 x 700 mm (width x depth x height).

Condition: used, Year of construction: 2018, An immaculate 2018 XYZ 750 LR VMC fitted with 20 Tool ATC, Shopmill, MPG contour handwheel, with only 2000 spindle hours. SPECIFICATION: CONTROL: - Siemens 828D Control with ShopMill TABLE: Dlodpfowln Hcsx Addoa - Size: 830 x 410 mm - T-Slot Size: 3 x 16 x 100 mm - Max Table Load Capacity: 500 kg - Distance from Spindle Nose to Working Surface: 100 – 600 mm - Distance from Spindle Centre to Main Column: 500 mm AXIS TRAVEL: - X-Axis Travel: 750 mm - Y-Axis Travel: 440 mm - Z-Axis Travel: 500 mm SPINDLE: - Spindle Taper: BT40 - Spindle Speeds: Up to 8,000 rpm FEEDRATES: - Rapids: 20 m/min - Cutting Feed Rates (XYZ): 1 – 20,000 mm/min SLIDEWAYS: - Linear Rail Slideways TOOL CHANGER: - Type: 20 Tool Carousel - Max Tool Weight: 7 kg - Tool Change Time (T-T): 8 Secs DRIVE MOTOR: - Spindle Drive Motor: 10 HP - Coolant Motor: 1/4 HP - Chip Wash Motor: 1/4 HP DIMENSIONS & WEIGHT: - Overall Dimensions: 2,100 x 2,100 x 2,655 mm - Gross Weight: 3,500 kg Control: Siemens 828D Spec: Travel X750 Y440 Z500 mm | 8000RPM | BT40 Accessories: Filter mist unit, MPG hand wheel, Coolant equipment, 20 Tool ATC

Condition: ready for operation (used), Year of construction: 2001, CNC twin table ERGON CNC Maskin SCM Type:Ergon Serie no:AA1/012348 Year:2001 CNC machine SCM ERGON Program NUM PC, and CAD ALIPA CAM 2 work tables simultaneoulsy or single work 2 tool magazin/too lchange each 12 holders 2 electro spindles each 11 kw, 18000rpm who can work in pair (DUOSET) independence Z axe stroke Tool holder HSK-63 1 drillbox 18 spindles Toolchange magazin 2x12 places Angular head Manual/instruction, pneumatic, electric diagram in severaL languages on CD Technical info: Control, program NUM-PC, CAD Alpha CAM Axis stroke X-Y-Z 4500-1740x-300mm Work tables 2 pcs each 2160x1520mm electyro spindles/routers DUOSET 2x11kw, 18000rpmwho can work in pair Vertical stroke of 2 independent Z axis Syncron electronic floating head 2 carousel toolholders for change each 12 pcs HSK 63 cone Vector axe Vacuumpump 90m3/h F18-drillbox 18 spindles Power 400 volt, 50 Hz, 3 phase Dsdsn Hx Tlopfx Addsla Dimension set up approx:7460x5500mm X-x Weight 7000 kg Stock no:2001650BXA Price: 200000 SEK

Condition: ready for operation (used), Technical characteristics ACMA rotary framing presses 4-tray carousel Production of muiltiplis squares, solid wood panels Dledpfxjt N At No Addsa Ideal for joinery, finger-jointing, worktops, etc. Usable length : 7500 mm (3 zones of 2500 mm) Useful height : 1300 mm Useful thickness : 100 mm 9 hydraulic front-pressers 18 double-acting hydraulic cylinders Wood infeed table, gluing width 200 mm Vertical roller discharge table Power and Motors Pluging: Three-phased Overall dimensions Lenght: 9000 mm Width: 2900 mm Height: 3200 mm Weight: 13000 Kg

Condition: excellent (used), Year of construction: 2019, For sale: 14 Kardex Megamat RS 350 vertical carousels in excellent condition. These machines have been meticulously maintained with annual servicing and have been used exclusively in a clean and light-duty environment. They are available for individual purchase or in packages of 2, 4, 6, 8, or all 14 units. The collection includes 6 units manufactured in 2018 and 8 units from 2019, offered in two height options: 6,585 mm and 7,110 mm. Each vertical carousel is configured with either 21 or 23 carriers, providing between 42 and 49 shelves per unit. A detailed description of the shelf configurations can be provided upon request. All units feature the optional "Matrix Strip," an LED guidance system installed at the access point. This system highlights the picking location laterally and displays product information, though ERP or WMS integration is required to fully utilize its capabilities. Please note that the boxes shown in images are not included. Dedpfx Asvgdkbeddela Specifications: Manufacturer: Kardex Remstar Model: MEG RS 350.1.3050.6.533.21 / MEG RS 350.1.3050.6.533.23 Manufacturing Year: 6 units from 2018, 8 units from 2019 Height (Vertical Carousel / Carrier): 6,585 mm & 7,110 mm with a free storage height of approximately 470 mm Width (Vertical Carousel / Carrier): 3,675 mm / 3,050 mm Depth (Vertical Carousel / Carrier): 1,671 mm / 628 mm Number of Carriers / Shelves: 21 or 23 carriers with 42-49 shelves Maximum Weight per tray: 228-350 kg, depending on the number of shelves installed Electronics: 3/N/PE 400V For further details or inquiries, please don't hesitate to get in touch.

Condition: as good as new (ex-display), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 10023297, load capacity: 180 kg, arm reach: 3,500 mm, pivoting range: 370 °, controller model: KR C4, TECHNICAL DETAILS Control system Dljdpfxovkcaie Addoa Controller: KR C4 Handheld control unit: KUKA smartPAD Performance data Maximum reach: 3,500 mm Nominal payload: 180 kg Nominal additional load (carousel/swing arm/arm): 0 kg / 0 kg / 50 kg Nominal total load: 230 kg Position repeatability (ISO 9283): ± 0.06 mm Number of axes: 6 Installation position: Floor Installation area: 830 mm x 830 mm Weight: approx. 1,201 kg Axis data and range of movement A1: ±185° A2: -120° / 70° A3: -120° / 155° A4: ±350° A5: ±125° A6: ±350° Speed at nominal load A1: 105°/s A2: 101°/s A3: 107°/s A4: 179°/s A5: 172°/s A6: 219°/s Operating conditions Ambient temperature during operation: 10 °C to 55 °C Protection class (IEC 60529): IP65 Protection class central hand (IEC 60529): IP65 EQUIPMENT - Stand - KUKA smartPAD A forklift is available for loading.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 11689, Schulze Texiprint carousel model KN 6/6 incl. 6 pallets and 6 stretched screen printing frames (8.700,- Euro net) incl. intermediate dryer SCHULZE Flash 4050 Plus (2.300,- Euro net) incl. accessories (inks, glue, squeegee, spatula, cleaner, cabinet...) (650,- Euro net) All items new or hardly used (less than 10x)! Both machines built in 05/2021! Dlsdpfx Adoqwdd Eodoa A sale of individual parts is also possible on request.

Condition: used, Year of construction: 2018, An immaculate ex University research facility machine that is hardly been used. Photographed as it it arrived and not yet cleaned! 2018 built HAAS Mini Mill... Machine Control: Haas CNC Table Size: 36" x 12" Dledpfx Aowzyd Eeddja Machine Travels (X/Y/Z) : 16" x 12" x 10" (406 x 305 x 254 mm) Spindle To Table Distance : 4" - 14" (100 - 346mm) Table Capacity : 500 Lbs.(1200 Kgs) Spindle Speeds : 6,000 Max RPM Rapid Traverse Rate (X/Y/Z) : 600 IPM (15M/Min) Maximum Cutting Feed Rate : 500 IPM (13 M/Min) Tool Changer Style : Carousel Tool Changer Capacity : 10 Stations Tool Change Time : 4.2 Seconds Max Tool weight : 12 Lbs. Spindle Drive : 7.5 HP Equipped with: 40 Spindle Taper, 10 Station Automatic Tool Changer, Coolant system, Rigid Tapping, Tooling & Manuals

Condition: ready for operation (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, load capacity: 120 kg, arm reach: 2,701 mm, TECHNICAL DETAILS Maximum reach: 2,701 mm Nominal load capacity: 120 kg Maximum load capacity: 167 kg Maximum additional load carousel / swing arm / arm: 300 kg / 130 kg / 150 kg Position repeatability (ISO 9283): ±0.05 mm Number of axes: 6 Control system: KR C4 Range of movement A1: ±185° A2: -140° / -5° A3: -120° / 168° Dedpfxjvi Igfj Addjla A4: ±350° A5: ±125° A6: ±350° Speed at nominal load A1: 120°/s A2: 115°/s A3: 120°/s A4: 190°/s A5: 180°/s A6: 260°/s MACHINE DETAILS Installation position: Floor Installation area: 754 mm x 754 mm Weight: approx. 1,069 kg Running time: approx. 120 h - 200 h (pre-acceptance, no active use) Network cable length: 10 m Power supply: AS13 134 CTR PNT EPS AIR AIR GDN Ambient temperature during operation: 0 °C to 55 °C (273 K to 328 K) Protection class (IEC 60529): IP65 Degree of protection for robot hand (IEC 60529): IP65 / IP67 EQUIPMENT - KR C4 basic enclosure - Drive configuration SC6.1 - Special paint finish for control cabinet (color: RAL 7035 light grey) - Labeling set de/en KR C4 - Double-bit cabinet lock - Mains supply HAN6 - Power supply XFMRless 400V - CSP Standard 2x USB 3.0 - Safety interface X11 - Kuka WorkVisual - Kuka PLCProConOS4-1 4.1 - SmartPAD holder - SmartPAD - Connecting cable set X20 (15 m) - BUS-smartPAD cable (10 m) - Axis limitation A1 20°

Condition: ready for operation (used), Technical characteristics ACMA line of rotary framing presses 4-tray carousel Production of muiltiplis squares, solid wood panels Ideal for joinery, finger-jointing, worktops, etc. Press n°1 : Usable length : 4500 mm Useful height : 1300 mm Usable thickness : 100 mm 5 hydraulic front-pressers 10 double-acting hydraulic cylinders Press n°2 : Usable length : 7500 mm (3 zones of 2500 mm) Dljdpfx Aek Rtwieddja Useful height : 1300 mm Useful thickness : 100 mm 9 hydraulic front-pressers 18 double-acting hydraulic cylinders Wood infeed table, gluing width 200 mm Vertical roller discharge table Power and Motors Pluging: Three-phased Overall dimensions Lenght: 9000 mm Width: 2900 mm Height: 3200 mm Weight: 13000 Kg

Condition: good (used), Year of construction: 1990, Kardex vertical carousel shelving Dsdpsw E Hh Esfx Addjla Type: Kardex Device no.: not legible Year: 1990 Device height: approx. 5,920 mm Device width: approx. 3,010 mm Device depth: approx. 1,250 mm + 300 mm tabletop Number of trays: 40 Tray width: approx. 2,500 mm Tray depth: approx. 400 mm Tray height: approx. 235 mm Compartment load: 250 kg Total load: 10,000 kg Color: White

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, A used CNC portal milling machine with carousel turning unit / C-axis for turning Hirth gearing TRAVEL PATHS X: 3,000 mm Y: 2,500 mm Z: 1,000 mm Table diameter: 2,000 mm Max. turning diameter: 2,500 mm Max. turning height: 1,000 mm Machine: Uniport 6000 Boring work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. C-axis for turning New price: €1.8 million Dlodpfx Ajvvh T Sjddsa Dismantling: by arrangement The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then the rotary attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this by 2.5° each time over the Hirth gearing. All holders (milling, turning, angle head) are clamped via HSK-100. A radio measuring probe from M&H (Hexagon) for measuring and probing the zero point is included with the machine. The machine is in operation and can be viewed on site. A video of the machine is available.

Condition: good (used), Roche MagNA Pure LC Nucleic Acid Preparation Station Description of the manufacturer, all data without guarantee. Services Save time with fast, fully automated isolation of high-quality DNA, RNA and mRNA. Get reliable, reproducible results. Benefit from high flexibility in sample type and volume as well as elution volume and post-elution processes. Benefit from software-assisted set-up of reagents and disposables. Automated pipetting of PCRs into LightCycler ® capillaries (LightCycler ® sample carousels ), LightCycler ® 480 multi-well plates (96-well), PCR plates or strips or tubes. Product description The MagNA Pure LC instrument is a benchtop instrument for rapid, cross-contamination-free nucleic acid preparation and PCR setup. A fully enclosed housing, automatic clot and tip loss detection and sample tracking make the MagNA Pure LC instrument a true "walk-away" instrument. Filtration, centrifugation and other manual steps are completely eliminated. No vacuum pumps or tubing are required. With the piston-driven 8-channel nozzle head and liquid handling with direct displacement, the risk of cross-contamination is reduced to an absolute minimum. The UV decontamination and HEPA filter system ensure maximum safety for samples and the environment.  Item condition: used untested Scope of delivery as shown Djdpsh Dpxhofx Addola Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2011, Used 2011 Hardinge plied with 8000 RPM Spindle, 30 station ATC, Swarf conveyor, coolant equipment & manual set. Dledpevq Ry Defx Addja SPECIFICATION: TRAVELS: X Axis 1020 mm, Y Axis 540 mm, Z Axis 540 mm Spindle Nose to Table (~ max) 685 mm, Spindle Nose to Table (~ min) 145 mm TABLE: Length 1120 mm, Width 540 mm T-Slot Width 18 mm, T-Slot Centre Distance 160.0 mm, Number of Std T-Slots 3 Max Weight on Table (evenly distributed) 700 kg SPINDLE: Max Rating 17.4 hp 13 kW, Max Speed 8,000 rpm, Max Torque 82.76 Nm, Drive System Direct Speed Belt Drive, Taper BT 40, Bearing Lubrication Air/Oil Injection Cooling Air Cooled FEEDRATES: Rapid and Jog (Max.) 36 m.min Cutting Feed Rate (Max.) 12 m.min AXIS MOTORS: Axis Motor Rating X Y Z - 2.29 12,29 3.3 KW TOOL CHANGER: Type Carousel, Capacity 20 Max tool diameter 89 mm Tool length Max. 250 mm Tool weight Max. 6 kg Tool change time 6 sec GENERALS: Air Required 4 scfm, 700 psi /min Power supply 45A FLA / 400 v / 3 phase Coolant Capacity 360 L Control: Siemens 828D Spec: Travel X 1020 Y 540 Z 540 mm | Max spindle RPM 8,000 | BT40 Accessories: Swarf conveyor, Coolant equipment, 20 tool ATC

Condition: used, Year of construction: 2016, operating hours: 851 h, functionality: fully functional, machine/vehicle number: MN25724, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 50 mm, total length: 1,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 2,600 kg, working height: 950 mm, workpiece height (max.): 50 mm, workpiece width (max.): 1,500 mm, The ER 1500 E is a deburring machine working from above on one side with the EdgeRacer carousel for precise processing of inner and outer contours with user-defined edge rounding. The EdgeRacer ER 1500 E offers a high throughput rate of more than 300 m²/h, surface-friendly processing - even with polished, brushed and foil-coated sheets - and reproducible results. Thanks to the roller conveyor of the EdgeRacer ER 1500 E, the sanding heads can also be fed below roller table level. The roller transport also ensures maximum energy efficiency - the processing costs are usually less than €0.01 per square meter of processed sheet metal. Thanks to the reversing operation, the sheets to be processed can be inserted and removed on the infeed side. Purchase the EdgeRacer deburring machine ER 1500 E as a demonstration machine with only 851 operating hours directly from the manufacturer. Djdpfxoucw Dze Addola

Condition: ready for operation (used), Technical characteristics ACMA rotary framing presses 4-tray carousel Production of muiltiplis squares, solid wood panels Ideal for joinery, finger-jointing, worktops, etc. Usable length : 4500 mm Useful height : 1300 mm Useful thickness : 100 mm 5 hydraulic front-pressers Dedpfxot N Auas Addela 10 double-acting hydraulic cylinders Wood infeed table, gluing width 200 mm Vertical roller discharge table Power and Motors Pluging: Three-phased Overall dimensions

Condition: good (used), Year of construction: 2003, Kardex carousel Type: SYS-120-1414 Dlsdpfxsq I R D Ne Addoa Device no.: 03001086/001 Year of manufacture: 2003 Rack height: approx. 3110 mm Unit width: approx. 2950 mm Unit depth: approx. 1150 mm + 300 mm table top Number of shelves: 14 with 7 additional drawers Shelf width: approx. 2630 mm Shelf depth: approx. 320 mm Shelf height: approx. 330 mm Shelf load: 100 kg Total load: 1400 kg Color: white

Condition: like new (used), Year of construction: 2014, 1 as-new CNC travelling column bed type milling machine Manufacturer: Soraluce Model: FL 8000 Year of manufacture: 2014 Control: Siemens 840 D Solution Line Technical data: Travel X-Y-Z: 8000 x 1300 x 1800 mm C-axis travel: 360 degrees Table clamping surface: 6000 x 2000 mm Tool holder: SK 50 Capto C8 Speed range up to: 4000 rpm Main drive: 43 kW Rapid traverse: 35 m/min CNC rotary table: 1600 mm, 250 rpm Weight approx.: 40 t Equipment / Accessories: Tool magazine Controlled universal milling head Chip conveyor Full enclosure Dedpfx Aswzx Ntjddela Complete coolant system Electronic handwheel Through-spindle coolant (IKZ) Indexing clamp Vertical carousel rotary table D=1600 mm: 250 rpm Clamping field 6000 x 2000 mm Planing slide, etc.

Condition: excellent (used), Year of construction: 2012, section dimension max. 150 x 50 mm pipe Ø 50 – 150 mm wall thickness 1,5 - 5,5 mm reference material (tensile strength) 600 N/mm² coil Ø max. 2.100 mm coil weight max. 10 t finish pipe length max. 9.000 mm round pipe Ø according to list rectangular pipe according to list speed 100 m/min working direction left → right The line consists of: 1. entry part: double carousel decoiler coil opener/pinch roll unit/leveller crop shear strip tail end welding machine strip guide strip twister/pinch roll unit/strip accumulator entry strip accumulator edge trimming exit twister Djdpfouc Sw Aex Addola 2. forming part: No. of horizontal stands: 4 No. of vertical stands: 3 3. welding part (HF) 4. calibrating part 5. separation 6. edge bevelling 7. blowing out 8. bundling 9. hydraulics 10. electrics

Year of construction: 2015, condition: new, rotary drum dimensions: length: 6000 mm Dljdscmxzispfx Addsa inside: Ø 1600 mm outside: Ø 2280 mm max. temperature: 1200 ° C heating: gas eating power 2700 kW melting capacity: 6000 kg / h The plant consists mainly of: - furnace - hydraulic power pack and tilting mechanism - heating system - carousel with molds - charge box - measuring and control system

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,150 h, functionality: fully functional, machine/vehicle number: 1901910, year of last overhaul: 2024, Equipment: documentation/manual, Hebbecker Alpha- Line- S carousel 12 pallets + 6 prints. Supplied with the machine: 12x aluminum sandwich adult pallets, 42 x 70cm 12x aluminum sandwich small pallets, 32 x 70cm 12x aluminum sandwich sleeve pallets, 13 x 70cm 4x Hebbecker printing squeegees 35cm with cuts for polo shirts 4x Hebbecker pressure and flood blades, 13cm 12x USA rubber pallet cover 3mm, 42/70cm 12x USA rubber pallet cover 3mm, 32/70cm Dljdpfx Astq U Ureddsa 12x USA rubber pallet decking, 3mm, 13/70cm 1x laser cross with holder for positioning the prints 2x intermediate dryer Magic- 25 with pyrometer temperature sensor

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL031303405S, For sale is a single unit consisting of a textile carousel with a matching conveyor dryer: M&R Sportsman EX 8/6 textile carousel, built in 2013 Total print count: 1,168,378 Diameter: 386 cm Weight: 1,497 kg Power supply: 380 V Pallets: Textile - 40 x 55 cm, 8 pieces Pockets - 30 x 40 cm, 8 pieces Sleeves - 15/12 x 40 cm, 8 pieces Squeegees: 6 x flood and 6 x pressure squeegees Screen fit with TRI-LOC M&R Radicure D 36/6-3 conveyor dryer, built in 2012 Conveyor width: 91 cm Drying channel length: 183 cm Total width: 127 cm Total length: 305cm Weight: 817kg Power supply: 380V Dljdov Iy H Ispfx Addea Price negotiable

Condition: good (used), Year of construction: 1990, Megamat carousel rack Type: 112-350-13 Device number: 7479 Year of manufacture: 1990 Device height: approx. 2950 mm Device width: approx. 2675 mm Device depth: approx. 1130 mm + 280 mm table top Number of shelves: 13 Dodov Ewn Dspfx Addola Shelf width: approx. 2160 mm Shelf depth: approx. 295 mm Shelf height: approx. 330 mm Shelf load: 100 kg Total load: 1,300 kg Color: beige

Condition: new, Year of construction: 2025, General specification FANTOM 2136, is associated with milling, optimizing, drilling in 2D and 3D processes of panels such as wood, fiberboard, chipboard, doors, furniture parts, plastic, alucobond (type of composite), aluminum and acrylic materials. The machine can be converted into a fully automatic production line. Technical specification FANTOM 2136 Working range 2100 mm x 3660 mm Z-axis 250 mm X-axis speed 90 m/min Y-axis speed 90m/min E0dkmojey Hnocm E T Ssld Uw Roi Rok Z-axis speed 30 m/min Motor power 11 kW / 15 hp HSK F63 Hiteco Spindle speed 24000 rpm Multi-drilling unit Control system Beckhoff PC based Cad Cam Software AlphaCam Lubrication system Automatic Tool cooling air cooling Tool change 16 pieces fixed magazine Standard Tool change Carousel: option Vacuum pump 250m3 Becker Vacuum area 9 automatic areas Power 25 kW Electricity 380V - 50Hz Dedpfxjwc N Sbj Addjla Weight 4040 kg Dimensions 3800mm X 5400mm.

Condition: good (used), machine/vehicle number: 50-14-05-3-23, We offer the following for sale here: Item number: 12878 Prince Technologies PrinCe 560 Capillary Zone Electrophoresis System Connections: Mains, HV control, parallel port A, parallel port B, Dedpfx Aeu Eb D Hjddjla Psxh8M Series port A (RS232), Series port B (RS232). Technical data: Injection method: up to 650 min, in 0.01 min steps; Hydrodynamics: 180 - 250 m bar, in 1 mbar steps, electrokinetics; -30 to + 30 kV, current and/or voltage Flow/pressure range: 0 to +3000 mbar from DCI device. Volt range: 30 kV to +30 kV Current range: -200uA to +200uA Rise: Programmable volt or amp rise Polarity reversal: Programmable before and during the sample run. Autosampler: Position carousel for 30/48 sample and buffer vials. Variable vial size, including Eppendorf micro centrifuge tubes. Buffer volume: Max. 4 ml Sample volume: Min 10ul, max 4 ml. Temperature control: sample and buffer 4 C to 40 C. Lapillary output: 5 C to below 60 C Detector: Allows the use of: UV/Vis, fluorescence, diode array, LIF, conductivity, electrochemical and MS. Year 2004 Model PrinCe 560 0500.022/CR S/N: 50-14-05-3-23 Dimensions:50x50x54 cm Weight: 35 kg without function test