Used Centering Unit for sale (39,682)

Condition: used, Year of construction: 1971, functionality: fully functional, Center distance: 2.000 mm turning diameter: 1.200 mm Csdjyhpdyjpfx Afpepu turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 max. width of the adjustable bed: 900 mm spindle bore: 85 mm turning rate: 14 - 710 U/min dimensions: 4.705 x 2.060 x 2.000 mm equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning diameter over slide rest: 280 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Cedpfx Afjyhpc Njpjpu Digital read out 3 axis fixed steady rest feed safety chip tray several tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, Year of construction: 2021, functionality: fully functional, Control: FANUC 0i Cpedpfxsyhpabo Afpou x-travel: 900 mm y-travel: 460 mm z-travel: 520 mm Table dimensions (LxW): 1.050 x 459 mm max. table load: 600 kg rapid travel x/y/z: 36 / 36 / 36 m/min max. spindle speed: 8.000 rpm Tool magazine for 30 + 1 tools chip conveyor Hand-held spray gun with coolant RENISHAW touch and spindle probe

Condition: used, Year of construction: 2006, functionality: fully functional, Control: MAZATROL 640 workpiece diameter, max.: 1.050 mm workpiece length, max.: 1.000 mm Max. Spindle speed: 10.000 rpm Codpfjyhm Rwex Afpspu table speeds: 500 rpm table drive: 37 kW number of tools: 80 number of paletts: 2 chucking diameter: 800 mm

Condition: used, Hydraulic feed gearbox suitable for Harbs woodworking machines or similar. Cedpfx Ajwktmrsfpspu The gearbox enables manual, infinitely variable adjustment of the feed or transmission speed.

Condition: used, Pressure: 100 bar Capacity: 2 L Cpjdpfswdun Dex Afpsu Motor: 0.75 kW

Condition: used, Motor: 1.5 kW Cpedpfx Afewdum Tspju Operating pressure: 70 bar

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW Csdpol Nbqcsfx Afpopu mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: refurbished (used), Overhauled 3-stage bevel-helical gearbox FLENDER, Model: KZA 360, P = 194 kW, n1 = 1,500 rpm, n2 = 60 rpm Cpsdpfoyhngtox Afpju

Condition: used, Year of construction: 2023, gebraucht 2023 1675 prompt, Zwischenverkauf v Bulgarien 17600 € 1 325 mm 1000 mm 165 mm 32 mm 190 mm 200 mm 5 4,5 M 12 85 - 2.000 1/min 48 0.006 - 1.77 mm/U 0.003 - 0.885 mm/U Cpsdpfx Ajwirwysfpeu 0.1 - 28 mm 75 - 2,5 Gänge/" 0.1 - 1.75 150 mm 95 mm 40 mm 3 MK 100 mm 2.2 kW 2150 mm 950 mm 1350 mm 770 kg demo machine / mint condition net price (price for new machine € 21.690,00) driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" incl. following optional equipment: 1 lenght stop FURTHER TURNING LENGTHS ON REQUEST

Condition: used, Year of construction: 2014, operating hours: 17,000 h, overall weight: 52,500 kg, With FABO Guarantee Purchased & Overhauled by FABO: The machine was purchased by our company and has undergone all necessary inspections. Comprehensive Maintenance: All service and maintenance procedures have been meticulously completed. Replaced Wear Parts: All worn-out wear parts have been replaced to meet original quality standards. Ready for Immediate Use: The machine is in stock and can be shipped to your construction site the same day it is purchased. Technical Specifications: Model: Sandvik QI441 Serial Number: 1884BG14205 Operating Hours: 17,000 hours Capacity: 300 – 500 tons/hour Cpsdoydk Sqjpfx Afpou Crusher Dimensions: 1380 x 800 mm Motor : CAT 328 kW Weight: 52,500 kg Year of Manufacture: 2014

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 2188, A high-performance, automated production line for the manufacturing of rectangular ductwork. The SWAH LCP-01 is a robust European system designed to transform coil material into finished, reinforced rectangular duct sections with maximum efficiency. This line is a complete system, including: • 4 Decoilers Station: To hold and feed heavy sheet metal coils (allowing for quick changes between different material thicknesses or widths). • Straightening & Leveling Unit: Ensures the sheet metal is perfectly flat before processing. • Beading/Stiffening Station: Automatically forms longitudinal stiffening ribs (V-profile) to ensure the structural integrity of the rectangular ducts. • Automated Notching & Cutting: High-precision hydraulic system for cutting to the exact programmed length. • Folding/Bending: Processes the material for easy "L" or "U" shape formation or full duct sections. Cpjdpfx Asyhnbqsfpju • Material Thickness: - Galvanized Steel: 0.4 mm – 1.2 mm - Stainless Steel: 0.4 mm – 0.8 mm

Condition: ready for operation (used), Year of construction: 2016, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 241 2016 004, air pressure: 8 bar, air demand: 43 m³/h, input voltage: 400 V, input current: 50 A, Equipment: Bluetooth, USB port, HAFFNER - MURAT Cutting and Processing Center Productivity: 200-240 frames / 8 hours. This center performs profile cutting, milling, reinforcement profile insertion, and all tasks related to drilling various holes and their marking. Equipped with a full computer control system. Printer for barcode printing included. Capacity to load 10 profiles (up to 6.5 m each) on the platform. Fitted with a waste hopper for debris generated during cutting. Option for mounting two milling units for mullion processing. Automatic vertical and horizontal profile clamping and feeding. Maximum profile processing length: 3500 mm; minimum: 400 mm. Capable of processing 500 profile types. Automatic clamping of the reinforcement, manually pre-inserted into the profile. Milling of water drainage channels in 3 directions. Csdpfxeyg Icfe Afpjpu Milling and copying of handle opening holes. Cutting at various angles possible (+/-30°).

Condition: used, Year of construction: 1998, x-travel 650 mm y-travel 560 mm z-travel 650 mm table surface area 400 x 400 mm control Fanuc 18i-M spindle turning speed range 120-12000 U/min ja/yes hand wheel type of pallet-changer 2 Cooling through the spindle 10 bar chip conveyor ja/yes feed 670 mm/min distance work spindle /surface of the table 800 mm table load 400 kg toolpiece magazine: chain magazine 80 BT 40 b-axis 360 1° Cedpfxexwp Hlo Afpjpu rapid traverse: 40 m/min feed 1-40.000 mm/min tool changing time 1,3 sec tool/tool tool changing time 3,8 sec chip/chip total power requirement 22,4 kW weight of the machine ca. 10,5 t dimensions of the machine ca. 5 x 3,3 x 3 m (LBH) Machining centre - Horizontal Mitsubishi M-H4B, year of construction 1998, good ondition, regularly maintained.

Condition: used, Year of construction: 2002, x-travel 750 mm y-travel 500 mm z-travel 400 mm spindle taper ISO SK 40 spindle speed: 20-8000 1/min rapid travel x/y/z 25.000 mm/min feed range 1-5000 mm/min Size of table plate 1000 x 500 mm tool change unit 20 Control Heidenhain TNC 530 Number of working hours 25754 h table load 400 kg workpiece length 300 mm total power requirement 7,5 kW weight of the machine ca. 4 t Cpedpfx Afoyatyiopju dimensions of the machine ca. 2,3 x 2,6 x 2,56 m WEMAS VZ 750 machining centre, 3 axes, 4th axis prepared Good condition, few operating hours, only samples and prototypes, mainly aluminium. Control system 30,397 hours Machine 25,754 hours Programme run 8,683 hours control: iTNC 530 ; NC Software 340 420 - xx updated 2021

Condition: used, Year of construction: 2007, turning diameter 42 / 140 mm turning length 170 mm control Mitsubishi Meldas turning speeds 80-8.000 U/min c-axis 0,001° turret (x-stations) 2x 12 (VDI 20) angetrieben turning speeds 45-4.500 U/min spindle 1 kW gripping station 42 mm turning speeds 60-6.000 U/min c-axis 0,001° number of controlled axis 8 Cpsdpfxsvyli Es Afpou collet unit 48 DIN 6343 . Number of working hours 10769 h chip conveyor ja/yes Bj. 2018 total power requirement 7,5 / 11 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 2,4 x 1,6 x 2,2 m CNC turning and milling machine CITIZEN BOLEY BE 42, year 2007 Simultaneous working with 7 axes on main and pick-up spindle very good condition, operating hours 21.999h (September 2024) Accessories: # Various tool holders: 5x axiale driven tool holder # collet chuck for collets type 173E # additional coolant cooler # Knoll chip conveyor, year of construction 2018 The Boley BE 42 is without barloader. Loading magazine interface has been fitted. Complete battery exchange on 22.12.2025

Condition: used, Year of construction: 2008, turning diameter 12,7 mm turning length 50 mm control Traub System TX 8i turning speeds 12000 U/min c-axis 0,001° gripping station 12,7 mm c-axis 0,001 ° speeds 12000 U/min rapid traverse 15 m/min turret (x-stations) 6 worktool system 5+3 worktool system 3 Werkzeugsysteme total power requirement 2,5/4 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,4 x 1,1 x 1,7 m CNC turning machine Traub TNL 12K with barloader LNS Tryton 112 Cpsdpoygm R Isfx Afpeu Motor drive S8 (rear working with driven tools possible) Motor drive S7 (front working with driven tools possible)

Condition: excellent (used), I sell a hardness tester HAUSER 290 DR. Codpsu Udqrjfx Afpspu

Condition: used, mileage: 1,97,218 km, power: 471 kW (640.38 HP), first registration: 07/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 12/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGX 18.640 LL SA "INDIVIDUAL LION" First registration: 07/2021 Mileage: 197,218 km Engine: D38 with 15-litre displacement and 471 kW / 640 hp GX cab, 1 bunk, electric glass sunroof, 12.3-inch Professional multifunction instrument cluster, driver door control panel with 4 functions, seats in ALCANTARA/leather, comfort driver‘s seat with seat heating and ventilation, passenger seat Vario/swivel, rain sensor, light sensor with high beam assistant, Climatronic air conditioning, auxiliary water heater, auxiliary air conditioning, tinted windows, LED headlights, LED fog lights, LED cornering lights, LED taillights, 2x air horns, STABO CB radio, extra thermal and acoustic cab insulation, fridge under the bunk, truck navigation, MAN sound system with subwoofer, smartphone integration, 220-volt outlet in cab INDIVIDUAL LION: Cab rear wall storage unit with 3 compartments Safety package lighting & visibility Comfort package driver assistance package Interior lighting package Plus Storage package LightFix stainless steel roof bar with 4x LED long-range spotlights MAN TipMatic 14.27 DD with Idle Speed Driving software, rocking function, EfficiencyPlus Retarder + high-performance engine brake MAN EVBec Full air suspension AGM super long-life batteries Wheelbase: 3,600 mm Aluminium diesel tanks: 580 litres (right) + 480 litres (left) Cedpfx Asx Egfbofpepu Tyres: Front axle: 385/65 R 22.5 Rear axle: 315/70 R 22.5 Fifth wheel height approx. 1,170 mm ALCOA high-gloss Dura-Bright aluminium wheels "RENTING is the new BUYING – with us also available immediately on full-service lease!"

Condition: good (used), I sell Parker 230V hydraulic power unit. Cpsdpfx Aeud Sbdefpou

Condition: new, Year of construction: 2025, Capacity: 1000 - 1500 kg/hour Cjdod Im Adspfx Afpepu Electric Motor Power: 15 kW Machine Weight: 1800 kg

Condition: used, Working area: 2,600 x 1,250 mm Spindle motor: 7.5 kW Video: Available upon request Feed rate: Max. 38 m/min X-axis: 2,700 mm Cpeden A Dwgepfx Afpju Y-axis: 1,600 mm Z-axis: 250 mm CNC machining center SCM Routech R 3000 for processing panel materials, featuring automatic loading (vacuum destacker) and outfeed. Special price for self-dismantling and self-collection.

Condition: used, Largest tool diameter: 300 mm Smallest tool diameter: 80 mm Grinding wheel diameter max.: 225 mm Tool width max.: 230 mm Knife grinding machine Weinig Rondamat 929 for the production of profile knives. Cpedpfjlf H Tgjx Afpsu Manufacturing from a straight blank or regrinding of used knives using a template. - Includes new coolant pump.

Condition: used, Year of construction: 2002, Technical Data: Cjdpfx Asx Iry Sjfpjpu Travel X-axis: 1250 mm Travel Y-axis (cross): 880 mm Travel Z-axis (vertical): 800 mm Tool holder: SK50 Drive power: 44 kW Tool magazine: 60 stations NC rotary table, table size: 1250 x 1000 mm Max. rotation speed of table: 8.1 rpm Universal milling head: B-axis Spindle speed range: up to 10,000 rpm Control unit: iTNC 530 Total connected load: 81 kVA Max. tool diameter for 30/60 tool stations: 100 / 110 mm Max. tool length from spindle nose: without tool breakage monitoring: 450 mm with tool breakage monitoring: 390 mm Features: - Heidenhain iTNC 530 control - 5-axis - 60 tool stations - NC rotary table - Coolant system

Condition: used, Year of construction: 2022, x-travel 1350 mm y-travel 950 mm z-travel 600 mm Control MAX 5 total power requirement 35 kW weight of the machine ca. 14 t Cpsdpfxsxfwg Ne Afpsu dimensions of the machine ca. 3100x4535x3495 m