Used Chainsaw for sale (23)

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, Characteristics of the crosscut saw - Single 500 mm blade on a robotic arm that can be moved in height, length and depth and tilted. - Everything is managed via a Human / Machine touch interface that ensures sorting and optimization of cuts. - The whole system is entirely confined in a box to reduce dust and noise to a minimum. - Motorized loading chain for wood up to 6.50 meters - Loading infeed table with digitized clamp - Automatic piece feeding, automatic feed, trim cut - Long cuts thanks to synchronized movement of the blade pusher - Second digitized clamp for the exit of the wood - Ink jet marking at the exit - Output table with automatic ejection on support arms - Protection grids - Waste recovery by wide belt under the blade - Waste lifting device for dumping - Control and programming panel on touch screen PC and color - Import of files in .btl format - Independent programming console for the inkjet head - Complete casing and CE standards - Minimum wood section : 30 x 50 mm - Maximum section of the wood : 80 x 300 mm or 80 x 260 mm (depending on the speed of the stroke) - Wood length : between 2000 mm and 6500 mm Modes of operation : - Automatic operating mode: from a file with information on the site, the machine automatically optimizes the cuts and indicates to the operator, the order of introduction of the wood for the cutting. The operator unloads the wood on the input table in the given order, the machine cuts it and the operator recovers the cut bars on the output table. Hfodek E Hvujpfx Aabon - Manual operation mode: The operator keeps full control of the machine movements, and adjusts all axes individually, mode used for maintenance purposes. Power supply : - Three-phase in 400 V / 8.5 kW (11 hp) / 300 mA differential Pneumatic supply : - 6 to 8 bars of dry air pressure, flow rate of 10 m³ per hour with instantaneous peaks connected by minimum D12 rilsan tube Dust suction : - 1 mouth of 160 mm of diameter at the right rear - 1 mouth of 140 mm diameter at the left rear - 1 x 80 mm spigot equipped with an 8 meter hose is recommended for cleaning Wood dimensions: - Max thickness: 80 mm - Maximum height: 260 mm to 300 mm (depending on equipment) - Minimum cutting length: 100 mm - Maximum cutting length: 6500 mm Machine very clean and in perfect working condition

Condition: used, New: Yes Empty weight: 7 kg Type number: 57261ff OEM : 57261ff Article nr.: W328999091N-veiling Chainsaw hyundai 500mm 58cc Hodpfoxh D S Rex Aabefn

Condition: used, functionality: fully functional, TECHNICAL SPECIFICATIONS: - Motor power: 11 kW Hfjdpfx Aew Iqfljabon - Guide bar length: 1700 mm - Chain lubrication - Mobile construction - Machine dimensions: 150x80x290 cm - Weight: 200 kg

Condition: ready for operation (used), Technical characteristics Blade diameter : 400 mm Cutting width : 180 to 3100 mm Hfsdpfx Aasucirdsbjn Cutting width : 400 mm Radial cutting from 0° to 45 Air-cushion table Workpiece clamping by pneumatic cylinder system Uniaxial electronic positioner for automatic control of cutting length Accuracy of +/- 0.2 mm 5-digit digital display 99 memorized dimensions Control panel Power and Motors Voltage: 380 V Pluging: Three-phased Motor: 4 CV Overall dimensions Lenght: 7000 mm Width: 2000 mm Height: 1500 mm Weight: 1800 Kg

Year of construction: 2011, condition: used, Vertical Semi-Automatic Chainsaw EISMO-IMET type WS 370 SA Year of construction: 2011 Blades dimension: Ø 370 mm Hfodpfxov Dkyqe Aabon Cutting capacity: Straight cut Ø 120 /180 x 100/100 x 100 mm Bevel cut: 45° right - 45° left - 60° right Pneumatic vise Adjustable forward/downward Lubricant pump Voltage: 380 V Width: 800 mm Depth: 1200 mm Total height: 2000 mm Weight: approx 500 kg

Condition: used, Year of construction: 1999, cutting height (max.): 210 mm, cutting width (max.): 460 mm, PNEUMATIC ADJUSTABLE CHAINSAW: Brand: STROMAB Type (Model): PS 600/P Serial No.: 990460 Year: 1999 MAKING CAPACITIES: - Maximum wood cross-section: 210 x 460 mm (thickness x width) - Adjustable arm (pivot): -45 to +40° - Cutting capacity pivoted at 45°: 210 x 325 mm max FEATURES: - CE marked - Pneumatic front arm feed - Lockable disconnect switch, push-button stops - Main power supply: 380V Three-phase 50 Hz - Saw motor power: 7.5 kW (10 hp) IN 16.5 A Hfodpfxsrx Tats Aaben - Blade speed: 2800 rpm - Saw blade: Ø 590-600 mm Bore: Ø 30 mm, Ø 4.2 mm thick - Table height (working height): 880 mm - Main wooden table: 1100 x 710 mm, with 2 pneumatic pressure gauges - Pneumatic power supply: 6 bar Estimated consumption: 28 nl - Extraction inlet: Ø 150 mm Recommended flow rate: 1350 m3/h, 20 m² Dimensions: 1700 x 1500 x h. 1900 mm Weight: 630 kg Please contact us for the supply of consumables, accessories, and/or extraction systems. Machine offered without any special servicing required

Condition: new, Year of construction: 2024, In a 1-man operation, 1/4 stere wood can be processed within a few minutes. We recommend the use of chainsaws with a power of 2.5 kW. Hfedpjfnxnxefx Aaben The Junior sawhorse is equipped with wheelbarrow wheels. Incl. guide bar and 1 chain

Condition: used, mileage: 6,28,277 km, power: 390 kW (530.25 HP), first registration: 10/2018, fuel type: diesel, color: black, axle configuration: 3 axles, gearing type: mechanical, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, FAT XF 530 SSC DEEP BLACK (46185) Riedler stake body Penz timber crane 15Z9.50 H1/B4 Grapple with chainsaw Central locking Electrical connection for trailer, 24 V/15-pin Rear axle 1: 315/80R22.5 Front mirror Automatic idle shutdown, 5 minutes Rear: 2 x 13.00 t, air suspension, SR1360T Parking heater with waste heat pump and timer Basic immobilizer Traction control (ASR) Rear suspension 26.0 t / Brakes 26.0 t Rear axle 2: 315/80R22.5g Spring-actuated brake chamber, first front axle Drive rear axle with disc brakes Hjdpfx Aaexc R S Hebsfn Interior trim color: Dark Sand Cab interior finishing: Piano Black Passenger seat: Basic Luxury sound system with 6 speakers Steel air tanks Adaptive cruise control with FCW and AEBS Electronic Stability Control (VSC) Driver’s seat armrest Glass sunroof, electric operation Lane departure warning system Electric windows Pollen filter Mechanical differential lock LED daytime running lights Universal FMS connector Driver Performance Assistant Upper sleeper bunk Exterior sun visor, green transparent Air-suspended cab MX-13 engine, 390 kW / 530 hp Cab emblem: 530 Reverse warning system Cab - Super Space Cab MX engine brake and ZF Intarder Auxiliary power supply: 12V/20A, 24V/2x15A + 2x40A Rear axle ratio 3.40 LED headlights LED rear lights Front axle 1: 385/65R22.5 16-speed manual transmission 16S25.. OD, 13.80-0.84 Emission class Euro 6 Front: 9.00 t, parabolic, standard, 183N Second transmission PTO NL/1b-Z Wheelbase 5.55 m / rear overhang 3.75 m Spring brake chamber on rear axle 1 & 2 First transmission PTO N.../10c-O-37/30 Cool box or refrigerator Skylights Xtra Comfort mattress, lower bunk Automatic cab climate control AdBlue tank 75 liters, left chassis side Truck phone ECAS remote control with extended functions Navigation preparation Driver’s seat: Luxury Air Analog superstructure signals and warnings Front axle 1, 9000 kg, load index 160 Axle load monitoring Steering wheel, leather, color black CAN J1939 functions in the body interface Lower sleeper bunk with 65-liter drawer Antennas: AM/FM, 2x GSM, GPS. Extra: CB Fog lights and cornering/turning lights R1, 315/80R22.5 R2, 315/80R22.5 SP, 315/80R22.5 F1, 385/65R22.5 Tank 750 L, left 2 rotating beacons on light bar 4 Hella roof spotlights Bycool compressor parking cooler, rear-mounted Light-Fix bar SSC E6 Switch in cab for constant power to truck reverse light Steering axle lock switch (trailer) Lift axle switch (trailer) Compressed air gun with cab mounting CB radio, 40 channel XXL storage table XF Euro6 Marlen

Condition: used, mileage: 5,874 km, Year of construction: 2021, Serial number: YV2RT60FXKA84xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20511 Specifications: - 2021 model - 5874 km (will increase slightly) - Eu-approved until: 21.02.26 - Euro 6 engine Hfjdpfx Aaowphixobon - 8x2 - 551 Hp - Suspension on 1st and 2nd axle: Steel - Suspension on 3rd and 4th axle: air - 2 x 110 liter variable pumps - 2 x manual extensions for main boom and 2 x for jib - Scanreco optical remote control (Top model) - Weight cell main boom - Extra function for main boom and jib - Auto leveling (The car puts itself in a level position ready for lifting.) - Virtual room (Possibility to limit all axes with a few keystrokes, no need to go to a workshop for this. Brilliant when working under high voltage etc.) - SKF central lubrication of the crown and up to the first joint - Extra function fully extended on jib - Single winch hook (Jib / main boom) - 2-part winch hook (Jib / main boom) - 4-part winch hook (Main boom) - Hook for jib - Hook for main boom (Large hook) - Emergency lowering unit (24 volts) - Wire stop sensor and sleeve - 4 ton winch - Diagnostic cable for online help (Remote help) - Danfoss valve center - 2 x 2 ton counterweight (Must only be used for cranes above the cabin otherwise the counterweights are not needed, and these can be removed as needed) - Front support leg Construction: - 4 x work lights strategically placed inside each support leg cabinet. - 50" LED bar work light rearward on the cabin - Powerful LED lamps in the crane. - VBG mount, with air servo control unit mounted in the rear cabinet left side. - Bracket on the roof - 2 pcs high beam LED bar on the roof forward (daylight!!). - Orange work warning LED beam on the roof. - EasyUp foldable ladder in the side with railing. - Boxes for chain, chainsaw etc. Mounted on the rear support leg so that these are driven out together with the support leg and are at the same time packed away while driving. - Charger for control in the cabin - Plastic internal screens axle 3 and 4. - 3 edge pull-out cabinet between axle 3 and 4 - On the left side between axle 2 and 3 there is a large cabinet with 500 W fan heater installed to hang clothes to dry etc. - Plane / bottom at the rear closed with alloxed aluminum floor plates that are cut to fit the car perfectly, with rounded edges for a very professional send. - CNC manufactured plates up the rear edge of the cabin. - Fully painted sides, cabin and stern. - Resting cradle for crane for driving without jib. - 5 support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cradles at the rear on the "level" - Right side large cabinet 1.2 x 1 meter - Powerful LED back / work lights at the rear. - Rear part of the car rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. - Hatches strategically placed for access to relevant devices under the bodywork. - Precisely cut out fields in the side coverage for access to the screen, manual controls, emergency lowering functions etc. - Marker lights along the side mounted so that they flash together with the turn signals / direction indicators - Cradle to hold the jib when not in use. - Hydraulic extra function dismantled main boom and jib,...

Condition: new, High-performance Firewood Processor with 20 Tons of Splitting Force - Brugger SA48 Pro! The Brugger SA48 Pro log splitter is the perfect solution for quickly and effortlessly processing logs with a diameter of up to 48 cm into high-quality firewood. Its well-thought-out yet simple design distinguishes this machine, which not only requires low maintenance but also facilitates repairs. This impressive device is equipped with either a powerful 14 HP Kohler petrol engine or a 9.5 kW 400V electric motor. The SA48 Pro does not rely on electronic control but is operated purely by mechanical components such as hydraulic valves with levers. Specifications: Maximum cutting length: 55 cm Maximum diameter: 48 cm Splitting force: 20 tons 55 cm bar Extra-wide 3.2 m conveyor belt Hydraulic feed up to the chainsaw Pivoting conveyor belt Automatic chain lubrication Despite its high splitting force and large diameter capacity, the log splitter remains relatively compact. Equipped with a drawbar, it can be attached to any trailer hitch, allowing for easy transportation. Additionally, two people can easily move the log splitter by hand on a flat surface without the need for a vehicle. Hfjdpfxjpz I Nno Aabon The length of the firewood can be adjusted continuously up to 55 cm. The splitting wedge can be manually adjusted in different positions using a lever, allowing for 2-way, 4-way, or even 6-way splitting, depending on the thickness of the wood. Optional equipment such as the log lifter or chain conveyor further facilitates the work process. The chain conveyor allows for loading multiple logs using a forklift, crane, or front loader, eliminating the need to lift one log at a time. Prices: Brugger SA48 Pro: €9,749 6-way knife: €199 8-way knife : €299 Additional PTO drive (for electric or gasoline): €949 Log lifter: €1,498 Chain infeed log deck: €1,898

Condition: new, mileage: 490 km, power: 375 kW (509.86 HP), overall weight: 26,000 kg, fuel type: diesel, color: green, axle configuration: 3 axles, gearing type: automatic, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, soot filter, For vehicle inquiries, Mr. Seidel will be happy to assist you (by phone). ---- Mercedes-Benz Arocs 2651 L 6x4 Short Timber Transporter ---- * BUNK/SHORT TIMBER BODY * Manufacturer: EBERT * Dimensions: approx. 6,750 mm between bulkhead and crane * 4 EXTE bunks D6 – adjustable, with clamp-mounting and lashing ratchets or counter-brackets for load securing * 8 EXTE stakes D5 – telescopic * Special Z-profile subframe, 200 mm high, closed in the frame center with chequer plate * Bulkhead welded construction with internal special aluminum profiles, approx. 2,600 mm high * 4-part foldable and telescopic tarpaulin cover for timber transport * High-quality hose chains and supply lines with step ladder for easier access * Installation of side marker lights * Access to crane, double compressed air connectors * Cover over battery box and air reservoir with aluminum chequer plate - both sides * Electrical and hydraulic interface (engine start/stop from crane seat) * With oil shut-off valve * With swing cover for chainsaw, etc. * Holder for snow chains * Holder for broom and shovel on the bulkhead * Structure primed, chassis black, epoxy primer & top-coated in acrylic quality * Oil filling * TÜV inspection, UVV inspection, tachograph calibration ---- With: Palfinger-EPSILON Loader Crane Y CRANE ON 2 M 12 Z91 – fully hydraulic timber loader crane ---- M12Z * EPSILON loader crane * Crane folded to the side * Equipment HIC/HD4/04 * Base unit and crane column painted RAL 7021 black grey * Hydraulic lines protected * Integrated operation switch and service interval display ---- MZ91_2 * Z-Arm system 9.1 m * Outreach: 9.1 m * Net lifting moment: 107 kNm * Max. capacity: 107 kNm ---- HHC_2 * High seat with removable manual control * incl. mechanical slewing mechanism at the crane column (without turntable) * B1B Electronic brake system with ABS and ASR * B1F Heating, electronic compressed air supply unit * B1H Electronic air supply and control, medium * B2A Disc brakes, front and rear axles * B2X Parking brake, electronic * B2Z Parking brake, additional at the front axle * B4A Condensate monitoring for compressed air system * B4M Compressed air tanks, steel * B5A Trailer brake, 2-line, brake connections on the left * C2R Wheelbase 4800 mm * C4L Frame overhang 2550 mm * C6J Power steering pump, non-regulated * C6Q Stabilizer, front axle * C6U Additional stabilizer, rear/trailing axle * D0A Leather steering wheel * D0S Air connection in the cab Hedpfsw Rthzjx Aabefn * D1C Driver comfort suspension seat * D1N Co-driver function seat * D2N Seatback unlatching, driver’s seat * D3B Comfort bed, lower * D4T Curtain, transverse in front of bed(s) * D4Y Sunblind, side, driver’s side * D5F LED ambient lighting * D6G Automatic climate control * D6M Additional hot water heater, cab * D7A Additional heat insulation * D8N Electric roof hatch * E3R Power socket 24 V/25 A, passenger footwell * E5H Night driving light switch * E5K MirrorCam switch at bed * E6A Trailer socket 24 V, 15-pin * E6Z Reverse warning * E7F Wired remote for air suspension * E9G Prewiring for electrical devices * F0F Side module, N3 vehicle * F0T Illuminated Mercedes star * F2E Floor variant, tunnel 170 mm, for storage compartment left * F2G Cab width 2.30 m * F2W StreamSpace * F5L Sun visor outside, transparent * F6C Tinted windshield * F6I Heated front mirror * F6Q Air horn * F6T MirrorCam * F8V Light sensor * F8W Rain sensor

Condition: new, overall weight: 16,000 kg, empty load weight: 4,400 kg, maximum load weight: 11,600 kg, axle configuration: 2 axles, suspension: air, tire size: 550/45R22,5, wheelbase: 1,200 mm, Equipment: ABS, additional headlights, fog lights, Steindl Palfinger forestry trailer 16 tonnes | Articulated drawbar with 2 cylinders, gearbox support foot, | 10 stanchion holders welded to the outside of the frame, 4 pairs of stanchions, | LED Stvo lighting system | Tires 550/45-22.5, FLAP-DOWN | Extendable frame, HEXAGONAL FRAME | 4 drum brakes o350mm for 8-hole rim - swing arms with wheelbase 1.20m | Pneumatic brake system with 2 Tristop cylinders and 2 diaphragm cylinders including wheel chocks, | License plate lighting and type approval 25 km/h | Bottom hitch | Support load: 2,000kg Errors, input and advance sales reserved. Steindl Palfinger forestry crane L | Standard equipment 9.5m RW including 4.5 tonnes flange rotator | 4-tab load sling (EPS-LINK), EPSILON crane column | Swivel mechanism with 4 swivel cylinders 2-circuit hydraulics CAN-BUS joystick control with 2 x 4-way control blocks electrically proportionally controlled including high stand, tarpaulin and high pressure filter, including BSZ plus an AUTEC radio remote control Hydraulic oil tank with 100 litres of hydraulic oil Hydraulic oil cooler with thermostat control Lifting cylinder protection Forestry package: Chainsaw, canister and sapling holder Headlight kit with 2x LED (1000 lumens) 2-rotary piston pump with console for universal joint drive and hydraulic oil 2x40 lt/600 rpm including screwed flange universal joint shaft Wood grapple with opening width 157 cm (0.30 m2), with flange rotator, reinforced version Hfodpfxorm S D Eo Aabon

Condition: used, Year of construction: 2006, operating hours: 21,732 h, power: 210 kW (285.52 HP), Equipment: air conditioning, cabin, parking heater, The PONSSE H6 harvester head is ideal for versatile tasks when processing trunks with medium diameters, maximum opening (feed rollers) 600 mm, felling diameter 640 mm, 3 feed rollers, all-round machine, feed force 25 kN, feed speed 6 m/s, weight (without rotator) 1050 kg, hydraulic chainsaw - length of the saw bar 750 mm, cutting diameter 640 mm, chain speed: 40 m/s, chain: 0.404? / 3/4?, power 45 kW, measuring and control system: Opti4G, transmission: hydrostatic-mechanical drive, hydraulic oil refill pump, vacuum pump, fuel pump, ground clearance: 600 mm, LED lighting, crane, 2 x hydr. Extensions, reach approx. 10 m, work lights, air conditioning, WEBASTO auxiliary heating, heated windscreen, operating hours: 21,732 (4,550.8 - driving hours, 12,428 - crane hours), battery disconnect switch, vehicle may be covered with advertising and/or lettering Hfsdpfx Aswkcnfeabjn

Condition: used, Year of construction: 2006, Pack chainsaw 7.5kw motor Hjdpfxjwtdvvo Aabsfn 380V 193kg Provide a chain and guide replacement Sold as is Engine works

Condition: as good as new (ex-display), Year of construction: 2024, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm Hjdedwktkopfx Aabjfn - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: new, High-performance automatic firewood processor with 20 tons of splitting force - Brugger SA48 Pro! The Brugger SA48 Pro automatic firewood processor is the perfect solution for fast and effortless processing of logs with a diameter of up to 48 cm into high-quality firewood. This machine is characterized by its sophisticated yet simple design, which not only requires little maintenance but also simplifies repairs. This impressive machine is optionally equipped with a powerful 14 HP Kohler petrol engine, a 9.5 kW 400V electric motor or PTO drive for three-point attachment. The SA48 Pro has no electronic controls and is instead operated purely mechanically via components such as hydraulic valves with levers. Specifications: - Maximum cutting length: 55 cm - Maximum diameter: 48 cm - Splitting pressure: 20 tons - 55 cm sword - Extra wide conveyor belt of 3.2 m - Hydraulic insertion up to the chainsaw - Pivoting conveyor belt - Automatic chain lubrication Despite its high splitting force and large diameter, the automatic firewood processor remains relatively compact. Equipped with a drawbar, it can be attached to any trailer coupling and thus transported without any problems. In addition, two people can easily move the firewood processor by hand on a level surface without the need for a vehicle. The length of the logs can be infinitely adjusted up to 55 cm. The splitting wedge can be moved up or down in various positions using a hand lever. This allows you to split 2-fold, 4-fold, 6-fold or even 8-fold, depending on the wood thickness. Optionally available devices such as the log lifter or the chain conveyor make the work even easier. Several logs can be loaded onto the chain conveyor with the aid of a forklift, crane or front loader, eliminating the need to lift a single log. The SA27 Pro has been replaced by the improved model, the SA48 Pro. Hfjdpfxstpm Nue Aabon Prices: Brugger SA48 Pro automatic firewood processor: €9,749 6-fold splitting knife: 199 € 8-fold splitting knife: 299 € Additional PTO drive (for electric or gasoline): 949 € Log lifter: € 1,498 Chain conveyor: € 1,898 Contact us for your customized offer!

Condition: ready for operation (used), Technical characteristics 4-strand chain introduction deck (optional) 3-strand decoder (optional) High performance edger SPEEDFLEX : (Ref C2985) Free roller infeed table Retractable guide aligned to the fixed blade Horizontal roller press 1 fixed blade + 3 mobile blades controlled by MUDATA 3 axis division. Lasers Sawing "downstream". Feed speed: 0-100m/mn Capacities: Max. passage height: 110 mm. Maximum sawing height: 100 mm. Max passage width: 1 000 mm. Maximum edging width: 710 mm. Max distance between 2 adjacent blades : 570 mm. Minimum distance between blades : 18 mm. Minimum length of the wood : 650 mm. Characteristics : Blade diameter : 400 mm. Rotation speed : 3750 rpm. Hjdpfx Aajtn H Etjbjfn Blade bore : 85 mm. Blade shaft diameter : 65 mm with counter-bearing Blade motor power : 55 KW (75 hp). Power of feed motor : 3 KW (4 hp). Separator and operator return belt Slatted belt for slab exit (optional) Automatic transfer mechanism for 3 strands (optional) Synchronized 3 strands unloader for introduction on the chainsaw (optional) Power and Motors Pluging: Three-phased Power: 55 Kw Motor: 75 CV Overall dimensions

Condition: new, mileage: 300 km, power: 419 kW (569.68 HP), overall weight: 26,000 kg, fuel type: diesel, color: green, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Iveco X-Way AS300X57ZP ON+ 6x4 short timber transporter---- * Axle configuration 3 axles, 2 drive axles * Drive axle variant Tandem Medio Semplice Riduzion * Brakes disc / disc * Driver's cab - Active Space version, large-capacity driver's cab * Suspension air suspension rear axle * Gearbox 12-speed HiTroniX, automated * Engine Cursor 13 - 570 HP Euro VI * Wheelbase 4800 mm * Use Mixed use, for roads and light off-road use * Permissible total weight 26 - 30 tonnes * AS driver's cab with high roof * Lifting roof electric version, transparent * Air suspension for driver's cab * One-piece bed at the bottom, hardness/reclining feeling - soft * Luxury driver's seat, air-sprung, heated, multi-adjustable, armrest on the right, * Lumbar and headrest, with integrated 3-point safety belt * Air suspension on rear axle * Rear axle ratio: 3.40 * Gearbox software ECO-Roll freewheel function * Hill start assist (Hill Holder), for comfortable starting on inclines * Electronic stability program (ESP) * Lane monitoring assistant (LDWS) * Emergency braking assistant (AEBS) Hedor E Szpspfx Aabsfn * Rocking mode (rocking mode) * Fully automatic air conditioning * Leather steering wheel with function buttons for radio, telephone, menu navigation * Sun visor for side window, driver and passenger side * Auxiliary heating diesel/water 4KW * Top refrigerator incl. Thermo-insulated box * Weight variant * Front axle 8,000 kg * 1st rear axle 10,500 kg (technically possible 11,500 kg) * 2nd rear axle 10,500 kg (technically possible 11,500 kg) * AdBlue tank, 80 liters * Trailer coupling, 50 mm, 200 kN * Trailer coupling, Ringfeder brand * Fuel tank 550 liters, left, aluminum * Frame overhang rear, 1990 mm * End cross member, D-value: 200 kN * LED taillights * Retarder / Intarder for ZF transmission or Allison automatic transmission * Color: Moss green IC 099 RAL 6005 * Tires 385/65 R22.5 ? 315/80 R22.5 * Transparent sun visor, installed on the outside of the driver's cab roof---- * ARM?SHORT WOOD?CONSTRUCTION * Crane: Palfinger-EPSILON loading crane Y_CRANE_ON_2 M 12 Z91- fully hydraulic wood loading crane * Make: EBERTDimensions: approx. 6,750 mm between bulkhead and crane- 4 ExTe ARMs D5 - movable with clamp fastening and lashing ratchets or counterholders for load securing- with 8 EXTE stanchions D5 - telescopic- with special Z-profile subframe 200 mm high in the middle of the frame closed with teardrop plate- Bulkhead welded construction with internal special aluminum profiles approx. 2,600 mm high- 4 x ? Fender with spring-loaded tarpaulin cover for the rear axles - Tail lights and supply carriers raised with step bar for better access - Installation of the side marker lights - Access to the crane, DUO-Matic compressed air connection - Cover over battery box and air tank with aluminum checker plate - on both sides - electrical and hydraulic connection (engine start/stop from the crane seat) - with aluminum step tool box for chainsaw etc. - with stainless steel tool box - Holder for snow chains - Holder for broom and shovel on the front wall - Structure sandblasted, flame-spray galvanized, epoxy resin primed & painted in acrylic quality - Oil filling - TÜV approval? UVV approval? Speedometer test We can make you a leasing or financing offer on request. Mr. Ebert (Tel.  will look after you

Condition: used, mileage: 18,629 km, power: 180 kW (244.73 HP), first registration: 10/2003, overall weight: 15,000 kg, fuel type: diesel, color: red, axle configuration: 4x2, maximum load weight: 3,675 kg, empty load weight: 11,325 kg, tire size: 285/70R19.5, next inspection (TÜV): 11/2025, driver cabin: other, gearing type: mechanical, emission class: euro3, suspension: air, number of seats: 6, Equipment: ABS, additional headlights, cabin, differential lock, fog lights, low noise, Vehicle location: Bovenden, Doka, 1x air seat, electric mirror, heated mirror, left electric window, right electric window, ABS (anti-lock braking system), constant throttle, PTO, differential lock, fog lights, work lights, rotating beacon, storage box, air suspension, low-noise G1, 4-point hydraulic outriggers, yellow environmental sticker. Superstructure: Metz turntable ladder DLA-K 12/9 L20FA with 2000l water tank & Rosenbauer N20 fire pump (turntable ladder approx. 1157 operating hours). Fire service-specific superstructure: Metz turntable ladder, 4-point hydraulic vertical outriggers with electronic ground pressure monitoring, 230V power supply to the rescue cage, intercom between the main control station and the cage, load eye on the lower ladder for loads up to 1.1 tons, 2-man rescue cage (180 kg max. payload), permanently piped water supply in the top section of the ladder, holder for power generator on the carriage (with power supply for rescue cage), 2 blue lights (double flashing beacons) on the driver's cab, 1 rear blue light (double flashing beacon), FIAM compressed air horns on the driver's cab roof, 2 front flashers, holder for work site spotlights on the front of the vehicle on the right, 2 halogen spotlights 1000 watts/230 volts, 2 drive-on planks, 4 chocks for outrigger plates, water cannon/monitor for attachment to the rescue cage, access ladder for hanging on the base of the ladder, stretcher support for attaching to the rescue cage, hanging device for attaching to the rescue cage, plug-in hanging device for climbing and lowering devices, reflective contour markings on the podium. Firefighting equipment: Metz fire engine, driver and crew compartment for 1+5 crews, seating arrangement in the crew compartment facing the direction of travel, 2,000-liter GRP water tank with electric level indicator, Rosenbauer N20 centrifugal fire pump, 2xB pressure outlets, quick-intervention reel for 50-meter DN25 pressure hose, storage for TP4/1 submersible pump, brackets for 4 self-contained breathing apparatus in the crew compartment, storage for a chainsaw, storage for 60 liters of foam agent in canisters, proportioner for medium and low-expansion foam pipes, storage for 4x B and 6x C roll-up hoses. Hjdpfxov T U Ecj Aabofn The vehicle was used in firefighting service until December 2024. The vehicle is being sold due to replacement. The vehicle is being sold for replacement. 10-year factory inspection performed in 2013 at Rosenbauer in Karlsruhe: - Hydraulic hoses replaced, oil and filter changed, - Main control cable replaced in the ladder system, - Ladder set measured - All hydraulic cylinders checked and sealed. Manufacturer inspection according to DGUV Principle 305-002 on December 2023. Last service with engine oil change performed in December 2023 at 17,948 km. The vehicle batteries were replaced in December 2022. Tires replaced (6-piece) in November 2019. The vehicle was serviced annually by the manufacturer... ACCESSORIES INFORMATION IS SUBJECT TO GUARANTEE. Subject to change, prior sale, and errors! - .

Condition: new, Year of construction: 2024, In 1-man operation you can process up to 1 ster of wood and 4-6 ster per hour within a few minutes. Safe and effective cutting due to the 25,33,50,66,75,100cm cutting length in front of adjusted guide rails. The roller guide at the tip of the chainsaw ensures that the firewood is cut to the desired length. incl. guide bar and 1 chain. Hfjdjfnvxgspfx Aabon

Condition: used, Exhibition machineDescription:The new ZSX-TWIN Ec carpentry chainsaw is the practical solution for large-dimensioned wood components. MAFELL has created a new dimension with the development of the twin-engine chain saw, with which previously almost impossible and time-consuming work can be implemented effortlessly and accurately. With a rated power of 3000 watts, even one CUprex motor brings the 230 V mains to its power limit. Two CUprex motors at the same time would bring any simply fused lighting power supply to its knees. If the power is distributed over two circuits, the two-motor ZSX gets the power it needs. This is precisely the power grid that offers us, since here the phases are fused separately from each other and the grid is therefore not antage Benefit:Thanks to the use of light current technology, the ZSX TWIN weighs only 20 kg with 6,000 watts of rated power. This enables it to make longitudinal cuts up to a cutting depth of 400 mm! In wood construction and solid wood wall cutting, corner cuts are often necessary. Thanks to the vertical cutting tool, cutouts and overlaps can be made quickly and accurately. Time-consuming turning of the wood components is no longer necessary. At the heart of the ZSX-TWIN Ec are the two 3,000-watt luminous flux motors. They are operated in parallel on two 230 V phases from the power grid. The ZSX can be swiveled from -15° to 60° exactly according to lication:Longitudinal and cross-sectional cutouts Material use e.g.: Solid wood, glue laminated beamsTechnical data:Cutting depth 400 mm Cutting depth at 15° 386 mm Cutting depth at 30° 346 mm Cutting depth at 45° 282 mm Cutting depth at 60° 199 mm Swiveling on both sides -15° - 60° Cutting width 6.8 mm Rated idle speed 21000 1/min. Nominal input 2 x 3000 W Weight 20,0 kgScope of delivery:1 Chain saw ZSX TWIN Ec 1 Longitudinal cutting chain TWIN HM 400 No.: 006977 1 Fine cutting chain HM 400 No.: 006972 1 Transport carriage ZSX-Twin Ec No..: 205940 1 Glider for guide bar insert No.: 205934 1 Rip fence No.: 204591 1 Combination screwdriver 6 mm No.: 093272 1 Open-end wrench 13 mm No.: 093008 1 Connection cable 10 m complete with CEE plug 400 V No.: 087906 Hsdpfxevwfy Se Aabofn

Condition: new, High-performance Firewood Processor with 20 Tons of Splitting Force - Brugger SA48 Pro! The Brugger SA48 Pro log splitter is the perfect solution for quickly and effortlessly processing logs with a diameter of up to 48 cm into high-quality firewood. Its well-thought-out yet simple design distinguishes this machine, which not only requires low maintenance but also facilitates repairs. This impressive device is equipped with either a powerful 14 HP Kohler petrol engine or a 9.5 kW 400V electric motor. The SA48 Pro does not rely on electronic control but is operated purely by mechanical components such as hydraulic valves with levers. Specifications: Hfedpfspz I Ncjx Aaben Maximum cutting length: 55 cm Maximum diameter: 48 cm Splitting force: 20 tons 55 cm bar Extra-wide 3.2 m conveyor belt Hydraulic feed up to the chainsaw Pivoting conveyor belt Automatic chain lubrication Despite its high splitting force and large diameter capacity, the log splitter remains relatively compact. Equipped with a drawbar, it can be attached to any trailer hitch, allowing for easy transportation. Additionally, two people can easily move the log splitter by hand on a flat surface without the need for a vehicle. The length of the firewood can be adjusted continuously up to 55 cm. The splitting wedge can be manually adjusted in different positions using a lever, allowing for 2-way, 4-way, or even 6-way splitting, depending on the thickness of the wood. Optional equipment such as the log lifter or chain conveyor further facilitates the work process. The chain conveyor allows for loading multiple logs using a forklift, crane, or front loader, eliminating the need to lift one log at a time. Prices: Brugger SA48 Pro: €9,749 6-way knife: €199 8-way knife : €299 Additional PTO drive (for electric or gasoline): €949 Log lifter: €1,498 Chain infeed log deck: €1,898

Condition: new, High-performance Log Splitter with 20 Tons of Splitting Force - Brugger SA48 Pro! The Brugger SA48 Pro log splitter is the perfect solution for quickly and effortlessly processing logs with a diameter of up to 48 cm into high-quality firewood. Its well-thought-out yet simple design distinguishes this machine, which not only requires low maintenance but also facilitates repairs. This impressive device is equipped with either a powerful 14 HP Kohler petrol engine or a 9.5 kW 400V electric motor. The SA48 Pro does not rely on electronic control but is operated purely by mechanical components such as hydraulic valves with levers. Specifications: Hjdpfolu Dc Nox Aabofn Maximum cutting length: 55 cm Maximum diameter: 48 cm Splitting force: 20 tons 55 cm bar Extra-wide 3.2 m conveyor belt Hydraulic feed up to the chainsaw Despite its high splitting force and large diameter capacity, the log splitter remains relatively compact. Equipped with a drawbar, it can be attached to any trailer hitch, allowing for easy transportation. Additionally, two people can easily move the log splitter by hand on a flat surface without the need for a vehicle. The length of the firewood can be adjusted continuously up to 55 cm. The splitting wedge can be manually adjusted in different positions using a lever, allowing for 2-way, 4-way, or even 6-way splitting, depending on the thickness of the wood. Optional equipment such as the log lifter or chain conveyor further facilitates the work process. The chain conveyor allows for loading multiple logs using a forklift, crane, or front loader, eliminating the need to lift one log at a time. Prices: Brugger SA48 Pro: €9,749 6-way knife: €199 8-way knife: €299 Additional PTO drive (for electric or gasoline) : €949 Log lifter: €1,498 Chain conveyor: €1,898