Used Chamfer for sale (348)

Condition: used, Year of construction: 1983, pressure 180 t chamfer lenght 3050 mm distance between columns 2550 mm throat 250 mm stroke 150 mm return speed 65 mm/sec ajustment speed 50 mm/sec work height max. 1010 mm oil volume 150 l total power requirement 11 kW weight of the machine ca. 9500 kg dimensions 3100 x 1750 x 2850 mm Equipment: - Controlled axes: Y1, Y2, X - Electric rear stop, adjustable from the front * Fine adjustment via hand crank* - 2 front support arms - Upper tool - Lower tool = die block - Rear + side safety device Ledjwa Dyzspfx Adwjrg - Foot control

Condition: used, pressure 150 t chamfer lenght 4300 mm distance between columns 3700 mm ram stroke speed 100 mm/sec working feed 8 mm/sec return speed 80 mm/sec stroke 175 mm table height 920 mm Control DELEM DA 52 total power requirement 11 kW weight of the machine ca. 15000 kg dimensions of the machine ca. 4800 x 1700 x 2850 mm Equipment: - Controlled axes Y1 - Y2 - X, as well as CNC crowning - DELEM DA52 CNC control - Electric backgauge (X-axis) Lsdsv S Iryspfx Adwjrg - 4x manually adjustable stop fingers - 2x front support arms - AMADA UKB system upper tool holder - Side guard - Foot switch

Condition: new, diameter -- mm work piece width -- mm workpiece length -- mm Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm Ljdjr I E Exspfx Adwjrg We can also offer you an optional 3D manipulator (mobile) for this device on

Condition: used, Year of construction: 1990, pressure 110 t chamfer lenght 4100 mm distance between columns 3100 mm dayligth 425 mm throat 300 mm stroke 225 mm working feed 10 mm/sec return speed 100 mm/sec table height 900 mm oil volume 260 l total power requirement 11 kW weight of the machine ca. 12000 kg Ledpfxjuiz I De Adwerg dimensions of the machine ca. 4400 x 1750 x 2500 mm Equipment: - Cybelec DNC 34 PC control system - Controlled backgauge 700 mm (X-axis) - Hydraulic tool clamping at the top - 2 support arms with sliding system - Upper tool - Lower tool - Side + rear safety device - 2 manual foot switches

Condition: new, diameter -- mm workpiece length -- mm work piece width 18 mm range of angles 15° - 50° ° weight of the machine ca. 110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on- site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient. *For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm * Application range of sheet thickness 6 - 40 mm * The bevel angle can be easily adjusted continuously from 15° to 50° without replacing any part * Double-sided bevel (X, K) with no material handling * Easy connection to 3D manipulator for easier operation and handling * Silent working * Equipped with automatic feeder * Stationary or mobile use * The machine works with large workpieces without any support at a speed of 1.9 m/min * Smaller workpieces are placed directly in the machine - Max. bevel width (hypotenuse): 18 mm - Infinitely adjustable angle: 15° - 50° - Area of application sheet thickness: 6 - 40 mm - Motor: 750W - Feed speed: 1.9 m/min - Weight: 110kg - Dimension: 438 x 719 x 644 mm Ledpfxok Egrtj Adworg We are happy to offer you an optional 3D manipulator (mobile) for this device on

Condition: used, pressure 200 t chamfer lenght 3100 mm distance between columns 2750 mm stroke 400 mm throat 300 mm oil volume 330 l total power requirement 18,5 kW weight of the machine ca. 18500 kg dimensions of the machine ca. 4300 x 2400 x 3600 mm Machine is only suitable for thin sheet metal Equipment: - CYBELEC DNC7000 CNC control Ledpfx Adjv S Irmoworg - Electric backgauge (X-axis) - CNC crowning - 4x controlled stop fingers - 2x front support arms with SLIDING SYSTEM - Hydraulic upper and lower tool clamping - Side + rear safety device - Tools (3 cabinets) - Foot switch - Operating instructions

Condition: new, diameter -- mm workpiece length -- mm work piece width 15 mm range of angles 15-50 ° plate thickness 6-40 mm total power requirement 1,5 kW Feed speed 3,5 m/min. dimensions 530 x 395 x 860 mm weight of the machine ca. 94 kg Ljdpek Uqhasfx Adwsrg The UZ15 RAPID machine is one of the fastest beveling machines with automatic feed on the market. It is not only suitable for workshops, but also for assembly work. It has a stepless Bevel angle adjustment system. Also, the machine with an automatic feed equipped. Working with the UZ15 Rapid is therefore very convenient. - For conventional steel (up to a strength of 600 MPA/ 87022PSI), brass, copper and aluminum materials - For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm - Application range of sheet thickness 6 - 40 mm - The bevel angle can be easily adjusted from 15° to 50° continuously without that a part needs to be replaced - Double-sided bevel (X, K) without material handling - Easy connection to the 3D manipulator for easier operation and handling - Silent working - Equipped with automatic feeder - Stationary or mobile use - The machine works with large workpieces without any support a speed of 3.5m/min - Smaller workpieces are placed directly in the machine - Reduced price when purchasing UZ15 RAPID together with the 3D manipulator

Condition: used, Year of construction: 2001, pressure 50 t chamfer lenght 1270 mm distance between columns 1040 mm stroke 215 mm throat 410 mm dayligth 385 mm back stop - adjustable 860 mm working feed 1 - 10 mm/sec return speed 135 mm/sec total power requirement 8,6 kVA weight of the machine ca. 4750 kg dimensions of the machine ca. 2000 x 2100 x 2400 mm Equipment: - Controlled axes: Y1, Y2, X, R - Pneumatic die shift - Manual upper tool clamping - LAN network connection - 4 stop fingers, manually adjustable, foldable to the rear, pneumatically clampable - CNC control, operation at front left - 2-hand operation/foot switch - 2-hand operation / foot switch Lsdpfevuz Nkex Adwsrg - Rear + side protective device Operating hours: 2,140.9 h Strokes: 6,837,706

Condition: used, Year of construction: 1973, pressure 110 t chamfer lenght 3100 mm distance between columns 2600 mm stroke 150 mm dayligth 350 mm work height max. 900 mm total power requirement 22 kW weight of the machine ca. 7700 kg dimensions of the machine ca. 3550 x 1800 x 2600 mm Equipment: - Electric rear stop (X-axis) - Electric depth adjustment (Y1 + Y2 axis) - 2x front support arms Ledpfew A An Nsx Adwerg - Two-hand operation - Side guard - Tools

Condition: used, Year of construction: 1973, pressure 200 t chamfer lenght 3600 mm distance between columns 2650 mm dayligth 500 mm throat 300 mm stroke 250 mm working feed 10,5 mm/sec return speed 100 mm/sec ram stroke speed 150 mm/sec table height 900 mm oil volume 500 l total power requirement 37 kW weight of the machine ca. 17800 kg dimensions of the machine ca. 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 Lrsdpfx Aet I D U Eedweg - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions

Condition: new, diameter -- mm workpiece length -- mm work piece width 0 - 3 mm speeds 3600 U/min range of angles 30 - 60 (stufenlos) ° weight of the machine ca. 31 kg dimensions of the machine ca. 530 x 420 x 410 mm Maximum bevel width of 3 mm - Mechanically adjustable bevel angle Designed for deburring and chamfering steel parts and workpieces. Processing of different materials. Solid and stable machine construction. * Scale for setting the processing depth * Security cover * Adjustable processing angle * For steel, stainless steel, aluminum and other materials * Precise, massive and overlong mechanical guide - Number of indexable inserts: 5 pieces (four-sided) - Feed: manual Lrsdpfxeppgcre Adwjg

Condition: new, Year of construction: 2023, pressure 150 t chamfer lenght 3100 mm distance between columns 2600 mm dayligth 450 mm throat 350 mm stroke 265 mm working feed 9,8 mm/sec Control DELEM DA 66 T total power requirement 22,5 kW weight of the machine ca. 10000 kg dimensions 4000 x 2200 x 2800 mm • Basic version as a C-frame • Compact table model • Ideal for prototypes and small series Ledpfx Aev H Eqcodwjrg • Very short setup time • Functionally simple • Wide range of applications • Low noise level • Low energy consumption • Easy handling including special equipment: - CNC control DELEM DA 41T

Condition: new, diameter -- mm workpiece length -- mm work piece width 12 mm range of angles 30/45/22,5/37,5/50 ° weight of the machine ca. 30 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Ledpfxsppgcye Adwerg Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on

Condition: used, Year of construction: 2000, pressure 60 t chamfer lenght 2050 mm distance between columns 1550 mm throat 255 mm stroke 165 mm dayligth 475 mm working feed 9,8 mm/sec return speed 117 mm/sec ajustment speed 150 mm/sec total power requirement 5,5 kW weight of the machine ca. 5000 kg dimensions of the machine ca. 2300 x 1500 x 2470 mm Lredpfsxrgv Hsx Adwsg Equipment: - DELEM DA65 CNC control - Electric backgauge (X-axis), 600 mm - Hydraulic upper tool clamping - Front light barrier - Side and rear protective grilles - Manually adjustable stop bar, foldable (R+Z-axis) - Upper tool - 2x support arms - Machine feet - Operating instructions

Condition: used, Year of construction: 2011, functionality: not functional, total height: 2,500 mm, total length: 12,000 mm, total width: 4 mm, power: 65 kW (88.38 HP), overall weight: 10,305 kg, bar diameter (max.): 110 mm, pipe diameter (max.): 110 mm, turning length: 350 mm, workpiece diameter (max.): 110 mm, Equipment: documentation/manual, We are offering this used Sinico SIN-O-MATIC TOP 2000 cutting and end-finishing machine, year of manufacture 2011. Model: SIN-O-MATIC TOP 2000 Type: TR110/2-350-CL-S CNC Serial number: 1459 Year of manufacture: 10/2011 Weight: 7,200 kg (plus magazine) Ljdpfx Adsycr Nhswjrg Workpiece diameter: 110 mm Maximum workpiece length: 350 mm Installed power: 65 kW max CNC control by NUM Automatic machine for cutting to length and end-finishing. Transfer machine with horizontal axis table for cutting and end-processing of tubes and bars. Flexible and highly adaptable CNC machine. It ensures high productivity, up to 2,500 parts/hour, and is designed for processing small to large workpieces: bar diameters up to 110 mm, finished part lengths up to 350 mm. Maximum versatility for machining tubes and bars. The machine is capable of performing the following operations: Chamfering – Face milling – Thread cutting – Forming – Marking Various spare parts, clamping jaws, and accessories are included. The machine is still assembled but has a fault, which is why it cannot be shown under power. If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), pressure 125 t chamfer lenght 3050 mm distance between columns 2550 mm ajustment speed 90.0 mm/sec working feed 10.0 mm/sec Lrodpoxabk Iefx Adwog return speed 75.0 mm/sec stroke 140 mm dayligth 375 mm column arm 250 mm table width 90.0 mm work height max. ca. 950 mm Number of working hours 14.100 h total power requirement 13.5 kW weight 8500 kg range L-W-H 3630 x 2300 x 2505 mm From a maintenance workshop Good / well-maintained condition With only approx. 14.100 operating hours (!!) - in checked conditions - machinevideo - ?v=wtEBQ0UawQ8 Equipment: - CNC electro-hydraulic press brake - DELEM CNC control - model "DA 58" * Swiveling control panel, front left * 2D graphic programming & product display * Tool & program library - CNC-controlled axes: * Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning - CNC electro-motorized backgauge (X axes) * Stop system with 2x CNC-controlled gantries - CNC electro-motorized height adjustment of the backgauge (R axes) - CNC electro-motorized adjustment of the stop fingers (Z axes) - Manual upper tool clamping - Manual lower tool clamping - Various split upper and lower tools - 2x stable, movable Front support arms - 1x freely movable 2-hand/foot control - Side guard (swinging doors) - Rear guard (swinging door) - Original operating instructions + control unit - Manufacturer's CE declaration

Condition: ready for operation (used), Year of construction: 1996, pressure 80.0 t chamfer lenght 2550 mm distance between columns 2130 mm column arm 420 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec stroke 200 mm dayligth 470 mm table width 60.0 mm Lrjdpfx Asxabnyjdwjg table height 910 mm Number of working hours ca. 37.102 h total power requirement 9.0 KW weight of the machine ca. 5750 kg range L-W-H 3100 x 2180 x 2540 mm good / well-maintained condition (!!) - Inspected condition - Machine video - ?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2 - CNC-controlled backgauge adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R-axes) - CNC-controlled left-right adjustment of the stop fingers (Z-axes) - Freely movable two-hand control & foot switch - Tool crowning - AMADA type - Various tools - CE marking - Side guards (hinged doors) - Rear guards (hinged door) - 2x emergency stop buttons at the front - Operating instructions

Condition: excellent (used), Year of construction: 1997, pressure 170 t chamfer lenght 4080 mm distance between columns 3680 mm column arm 410 mm dayligth 385 mm stroke 215 mm ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec table width 200 mm table height 1050 mm Number of working hours 25.430 h oil volume 350 l total power requirement 29 KVA weight of the machine ca. 16.450 kg. range L-W-H 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes (!!) - in checked conditions - machinevideo - ?v=yEaRj0XJAC4 Equipment: - CNC electro-hydraulic press brake/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language Ledpsxcp Rbefx Adwsrg * Large tool and product library * Graphic 2D programming * Automatic bend sequence calculation and collision detection * Emergency stop button at front - CNC axis adjustment: * Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 axis + CNC crowning - X axis - adjustment speed: 500 mm/sec. * Max. stop range: 860 mm - R axis - Adjustment speed: 300 mm/sec. * Max. travel: 250 mm - Z axis - Adjustment speed: 1000 mm/sec. * Max. travel: 3260 mm - CNC electric motor table crowning - CNC electro-pneumatic die shift (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x freely movable foot switch - Side safety device (swivel doors) - Rear safety device (sliding doors) - Original operating instructions

Condition: as good as new (ex-display), Year of construction: 2024, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable max. 800 mm oil volume 150 ltr. voltage 400 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours ----- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Lredpfx Adoxabt Aowjg Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: ready for operation (used), Year of construction: 2001, pressure 100 t chamfer lenght 4100 mm distance between columns 3700 mm column arm 415 mm stroke max. 215 mm dayligth 410 mm ajustment speed 200 mm/sec Ljdpexzuwkofx Adwjrg working feed 10.0 mm/sec return speed 150 mm/sec work height max. 1080 mm table width 100 mm Control CYBELEC oil volume 160 ltr. voltage 400 V power capacity 8.5 kW weight 10200 kg range L-W-H 4800 x 1800 x 2600 mm - in checked conditions - machinevideo - ?v=Phcik_oo4CE Equipment: - BEYELER electro-hydraulic CNC press brake - CNC CYBELEC control unit “DNC 1200 PS/B” * High-resolution screen * Clear, concise menus in the operator's language * Tool and product library * Swiveling control panel, front right - CNC-controlled axes (Y1+Y2-X) - CNC-controlled backgauge adjustment (X-axis) * 2x manually adjustable stop fingers - Manual upper tool clamping - Manual lower tool clamping - Rear safety device (safety door) - Side safety device (safety doors) - Bending tools * 1x set of split upper tools (ROLLERI TOP 175.26.R08) * 1x set of split 1V dies (V 12 mm) - 2x freely movable 2-hand controls - 2x freely movable foot switches - Operating instructions for control system

Condition: good (used), Year of construction: 1991, pressure 300 t chamfer lenght 4100 mm distance between columns 3710 mm stroke - stepless adjustable 250 mm column arm 330 mm dayligth 500 mm Lsdpexab I Tjfx Adworg table height 940 mm table width 250 mm working feed 7.0 mm/sec return speed 90.0 mm/sec Control konv. operating pressure max. 305 bar voltage 380 V total power requirement 22.5 kW weight 25200 kg range L-W-H 4320 x 2100 x 3500 mm well-maintained condition (!!) - in checked condition - machine video - ?v=rPOBwTfVReo Equipment: - simple, conventional hydraulic press brake - swiveling control panel, left front - electro-motoric back stop (X axis) * adjustment via front control panel (button) * with analog position display * fine adjustment via handwheel, front - with 3x stop fingers, manually adjustable - electro-motoric depth adjustment (Y1+Y2 axis) * with analog position display - 1x split set of 85° deer foot upper tool - 1x MultiV - universal die block, with several V-openings - 2x front, stable support arms - 1x freely movable double foot switch - 1x freely movable 2-hand control - side safety device (swivelling doors) - rear safety device (sliding door) - original operating instructions

Condition: new, Year of construction: 2008, pressure 90.0 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec back stop - adjustable max. 750 mm stroke 260 mm dayligth 460 mm table height 880 mm oil volume 200 ltr. Number of working hours ca. 47.100 h Lredpfx Adoxacdcoweg total power requirement 7.5 kW weight of the machine ca. 7500 kg. range L-W-H 4250 x 1800 x 2450 mm good condition - with 1x set of new bending tools (!!) current new price approx. 80.000 euros special price on request - in checked condition - machine video - ?v=Xlb8EgQ8088 Equipment: - electro-hydraulic CNC press brake - with DELEM CNC control model DA 66W * graphic 2D programming * automatic bending sequence calculation and collision detection * high-quality color LCD screen (TFT) - swiveling operation, front left - CNC controlled axes: Y1 + Y2 + X + R - CNC electro-motorized back stop (X axis) * with 4x manually adjustable stop fingers - CNC electro-motorized height adjustment of the back stop (R axis) - manually adjustable table crowning * including analogue value display * including hand crank for adjustment - AMADA upper tool Quick-change clamping * including crowning device in the tool holder - AMADA die adapter rail, bottom - 2x front, movable support arms ("sliding" system) - side protective device (swinging doors) - rear protective device (sliding door) - 1x freely movable 2-hand/foot control - Operating instructions (PDF) Special accessories included: - 1x NEW split set of upper tools (4x 835 mm) * Angle 85° / Radius R 0.8 mm / Height 66.5 mm - 1x NEW split set of lower tools (4x 835 mm) * V openings: 16/22/35/50 mm * Height 60.0 mm / Angle 85° / Material=C45

Condition: ready for operation (used), Year of construction: 2011, pressure 135 t chamfer lenght 3050 mm distance between columns 2600 mm column arm 410 mm ajustment speed 160 mm/sec working feed 10.0 mm/sec return speed 120 mm/sec stroke 265 mm dayligth 530 mm table height 900 mm oil volume 200 ltr. control DNC 880 S Number of working hours ~ 17.200 h total power requirement 15.0 kW weight of the machine ca. 10250 kg. range L-W-H 4570 x 2360 x 2900 mm good condition (!!) current new price approx. 80.000 euros special price on request - in checked condition - machine video - ?v=dyv7iQXcRt4 Equipment: - electro-hydraulic CNC press brake - two synchronized cylinders with "HIGH PERFORMANCE" hydraulic components - with CYBELEC CNC control - "DNC 880S" * 2D graphic display for display and multiple simulation * graphic 2D programming * easy handling * automatic bending sequence calculation and collision detection * large product and tool library * automatic tonnage calculation (pressure) - swiveling operation, front right - CNC controlled axes: Y1 + Y2 + X + R + CNC crowning - upper beam with solid, self-lubricating four-way guide Lrjdpjxablrofx Adwsg - CNC electro-motorized back stop (X axis) * with 2x manually adjustable stop fingers * Adjustment range up to max. 650 mm - CNC electro-motor height adjustment of the rear stop (R axis) * Adjustment range up to max. 250 mm - CNC electro-motor table cambering - AMADA/RAPID pneumatic upper tool clamp - AMADA lower tool holder, including die shoe - FIESSLER LASER safety device at the front - 2x front, movable support arms ("Sliding" system) - side safety device (swinging doors) - rear safety device (swinging door) - 1x freely movable foot switch - large hydraulic oil tank to keep the operating temperature low - original operating instructions

Condition: ready for operation (used), Year of construction: 2003, pressure 35.0 t chamfer lenght 1250 mm distance between columns 1095 mm stroke - stepless adjustable 215 mm column arm 410 mm table height 800 mm dayligth 455 mm working feed 10.0 mm/sec return speed 56.0 mm/sec work height max. ca. 875 mm Control DM 51 Number of working hours ~ 13.300 h oil volume 80.0 l operating pressure max. 240 bar voltage 380 V total power requirement 4.0 kW weight 2500 kg range L-W-H 1700 x 1450 x 2250 mm Lrodpfox Dc Uvjx Adweg - in checked conditions - machinevideo - ?v=Gn6PZEMmnmY Features: - Robust CNC-controlled hydraulic press brake - With DELEM CNC control unit “DM 51” * Positioning of the backgauge (X axis) * Positioning of the depth adjustment (Y1+Y2 axis) * Program + tool storage possible * Swiveling control panel, front left - CNC electric motor-driven backgauge (X axis) - CNC electric motor-driven height adjustment of the stop (R axis) - 2x manually adjustable stop fingers - 1x split set of deer foot tools - top - 1x split set of Multi V tools - bottom (16/22/35/50 mm) - Side safety device (swivel doors) + FIESSLER laser safety device - Rear safety device (swivel door) - 1x freely movable double foot switch - 2x front support arms - Machine operating instructions + CE declaration

Condition: ready for operation (used), Year of construction: 2009, pressure 35.0 t chamfer lenght 1250 mm distance between columns 1070 mm piston stroke 150 + 60 mm column arm 410 mm table height 800 mm dayligth 470 mm working feed 10.0 mm/sec return speed 70.0 mm/sec table width 140 mm Control ELGO NC Number of working hours ~ 9.600 h oil volume 80.0 l operating pressure max. 240 bar voltage 380 V total power requirement 4.0 kW weight 2200 kg range L-W-H 1800 x 1450 x 2150 mm Well maintained condition With only approx. 9.600 operating hours (!!) - in checked conditions - machine video - ?v=FTOUZ-ModXQ Features: - Robust NC-controlled hydraulic press brake - With ELGO NC control unit “P8822” * Positioning of the backgauge (X axis) * Positioning of the depth adjustment (Y1+Y2 axis) * Swiveling control panel, front left Ljdjx Avqzopfx Adwjrg - NC electric motorized backgauge (X axis) * With 2x stop fingers, manually adjustable (R+Z axis) - 1x split set of pointed tools - top - 1x rotatable Multi-V die block - Side safety device (swivel doors) + FIESSLER laser safety device - Rear safety device (swivel door) - 1x freely movable double foot switch - 2x front support arms - Operating instructions (ENG)