Used Chamfer for sale (360)

Condition: refurbished (used), functionality: fully functional, - Freymatic universal brick cutters type AM400, AM500, AM600; - Freymatic universal cutter AM400 with chamfering; - Lingl universal cutter; - Freymatic multi-wire cutter with 4-sided chamfering, with slug cutter, laths lifting mechanism, laths feed conveyors, control cabinet, for a lath length of 1340 mm; - Keller multi-wire cutter type 4155 with slug cutter and chamfering, slug length 1550 mm; - Lingl multi-wire cutter type A-HOK, slug length 1180 mm; Dcedjyk Rw Hjpfx Agkjd - Cleia multi-wire cutter, 5 months in operation

Year of construction: 2011, condition: used, functionality: fully functional, • Band running direction: LEFT to RIGHT, year 2011 #2010037 • 10 face grinding supports, 130 & 150 mm, with vertical oscillation • Horizontal oscillation for material thicknesses up to 100 mm • 1 lower & 1 upper chamfer milling support • 2 pneumatic lower & 2 upper chamfer supports • Belt infeed: motorised calibration/profile support Dedpfx Agjyruvcokocd • Belt outfeed: motorised drip rail support • Table widening console • Space requirement approx.: 725 x 180 cm

Condition: used, pressure 60T t chamfer lenght 2000 mm distance between columns / mm height of stroke / mm Dcjdpfx Ajylz Dysgkjd work feed / mm/s control / total power requirement / kW weight of the machine ca. / t

Condition: used, Holz Her Auriga 1308 XL Compact design – Edge thickness 0.4 - 8 mm SPS screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and glue quantity control with flushing routine Pre-milling unit for jointing before gluing Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU gluing, with tracing nozzle Workpiece height 8-60 mm High gloss package Dsdpsyh Ilyefx Agkocd Pneumatic pressure unit Pneumatic end trimming unit for coil and strip material up to 8 mm edge thickness, with pneumatic swivel from 0-10° angle of the end trimming saws Multifunctional milling unit 1827 MOT4 for flush trimming up to 8 mm, radius milling and 15° chamfer milling via NC axes Corner rounding unit – rounding corners up to 3 mm edge thickness, working height 12–60 mm, postforming possible Scraper unit 1929 MOT4, for chamfers and radii with 2 scraper holders via NC axes Surface scraper unit FK701 with pre- and post-sensing – finish Buffing unit – polishing Spraying device at infeed and outfeed Spraying unit with lubricant for high-gloss edges Complete DIA tool set included First delivery in 2021 Machine is in TOP CONDITION from business closure – small company Available from stock in Lieboch

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm Dcsdpfxexaax Re Agksd ram stroke speed 180 mm/sec work speed 10.0 mm/sec return speed 135 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90.0 mm oil volume 200 ltr. voltage 400 Volt total power requirement 15.0 kW weight 9450 kg range L-W-H 4250 x 2150 x 2800 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen * 2D graphical programming * 15" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "Sliding-System", with T-slot and cam - 1x double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: new, Welding Table BASIC Technical specifications: Dodpfjyimy Eex Agkecd - Dimensions: 2400 × 1200 × 12 mm - Hole system: Ø16 mm - Side height: 162 mm - Table height: 800–900 mm (adjustable) - Number of legs: 4 - Load capacity: 2500 kg - Grid: PLUS Material and manufacturing: - The welding tables are made of high-quality S355 steel. - The clamping holes are precisely milled and chamfered, allowing for optimal fit and easy use. - Surface protection: The tables are not surface treated. - Protection against material adhesion and corrosion is ensured by regular spraying with a specially developed protective emulsion. Additional equipment: - Option to purchase clamps and other accessories for work on welding tables. - For other table dimensions, please send an inquiry.

Condition: ready for operation (used), Year of construction: 2000, pressure 170 t chamfer lenght 3170 mm distance between columns 2700 mm column arm 420 mm dayligth 470 mm stroke 200 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec table width 180 mm table height 960 mm oil volume 235 L 0 300 bar controlled axis 6 Anzahl Number of working hours 29.400 h total power requirement 16.5 KW weight of the machine ca. 11910 kg range L-W-H 4025 x 2020 x 2900 mm well-maintained condition (!!) with only approx. 29.400 operating hours - in checked condition - machine video - ?v=APP0HZjMms4 Dsdsxabgpjpfx Agkjcd Equipment: - electro-hydraulic CNC press brake - AMADA CNC control "OPERATEUR 2" - 6 axes (X, Y1 + Y2, R, Z1 + Z2) * swiveling operation - front left * tool & program library - CNC-controlled back stop adjustment (X-axis) * adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R-axis) * adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1 + Z2) - hand control unit for manual movement of the axes - AMADA manual upper tool clamping system - AMADA Rehfuß upper tools - divided - AMADA Lower tool holder - incl. 1x V die (not complete) - AMADA DIGI PRO - gigital angle measuring system - 1x freely movable double foot switch - side protective device (swinging doors) - rear protective device (swinging door) - EMERGENCY OFF button at the front - Operating instructions (ENG)

Condition: used, Technical details: floor-plate length: 510 mm plate width: 270 mm Plate thickness: 65 mm Dsdpfju N D Dwex Agkjcd very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) *

Condition: new, mileage: 100 km, power: 290 kW (394.29 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, loading space length: 8,800 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new Mercedes Benz Actros 2540L 6x2, configured as a transporter for construction machinery and aerial work platforms. Truck equipment: - Long-distance cab (sleeper cab) - Auxiliary heater (parking heater) - Safety package - Driver comfort package - Trailer package - Steering tag axle - LED tail lights - Euro 6e emission standard - Automatic transmission - Sun visor - Beacon lights - Multifunction steering wheel - Single bunk - Refrigerator - Navigation system - GVW: 26,000 kg - Automatic climate control - White paintwork - suitable for long-distance transport - etc. Body: - Body manufactured from laser-cut and folded special profiles in low-bed design - Body length approx. 8,800 mm, minus tool box approx. 490 mm - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 stretch ramps, each with one fixed section and one extendable section, ramps laterally adjustable - Ramp surface made of grating floor - Mechanical ramp locking including holders on the outer frame when not in use (optionally with strap securing) - Ramps operated by electro-hydraulic unit, including emergency controls on the control block and hand pump for total failure - Hydraulic rear supports - All hydraulic functions controlled via radio remote control - Grating floor with increased load capacity - Rear section incl. chamfer - Front wall approx. 2,000 mm high with inward-folded profiles - Stainless steel tool box installed in front of the bulkhead - 2 stainless steel tool boxes on the frame sides for lashing materials (1 left, 1 right) - 1 stainless steel tool box rear right (for hydraulic unit and control block) - Work lights: 1 pair on cab rear wall, 2 pairs on sides of the frame, 2 pairs at the rear - 2 access ladders for load area access Load securing: - Longitudinal beams with Multi-X contour incl. 2.5 t lashing points - 6 pairs of 6 t lashing points integrated in the longitudinal beams - Outer frame with perforated design featuring 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the outer frame - 4 pieces of 6 t lashing points at the rear - 4 pieces of 6 t lashing points in front of the forward bulkhead tool box (beneath the floor) Dcjdpfx Agjw E Aawsked Paintwork: - Body KTL powder-coated in RAL 9005 black - Bulkhead painted in RAL 9005 black - Ramps and grating floors hot-dip galvanized Adhesive markings: - Side and rear reflective film in accordance with EC regulations. Further details available on request.

Condition: excellent (used), Year of construction: 2020, Homag Edgeteq S-200 Year: 2020 Specification: Feed Speed 11m/min Machine Length 4605mm Workpiece Thickness max 60mm Edge Material Roll 0-3-3mm Edge Material Strips 0.4-5mm Joint trimming / pre-milling (44mm high blocks) Standard EVA glue unit Pressure zone with 1 main pressure roller + 2 idel rollers with pneumatic adjustment for thickness End Trim unit with pneumatic adjustment for chamfer / straight Top and bottom trimming unit with 2mm cutters Contour trimming unit with 2mm cutters Profile scraping with pneumatic adjustment with 2mm blades Additional changeable scraping heads with 1mm blades Glue Joint scraper Buffers LED indoor lighting Control system easy touch Package for construction elements Basic v Package Central Lubrication 400V 50Hz CE Dodpfoypm Hhox Agkecd

Condition: used, pressure 100 t chamfer lenght 3000 mm distance between columns 2550 mm stroke 150 mm total power requirement . kVA Number of working hours . h weight of the machine ca. 8,3 t Back gauge 400mm Throat 250mm Speed: 8mm /S kW: 6,5 Volts: 380 The tech. Data are manufacturer or operator information and therefore non- Dcodsyqwbxopfx Agkod binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2008, pressure 120 t chamfer lenght . mm distance between columns 2550 mm stroke 200 mm total power requirement 13,2 kVA Number of working hours 2500 h workpiece 1 Satz Standart workpiece 1 Satz Standart Prisma Number of strokes 11000 weight of the machine ca. 8,3 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Dcjdeyqvfcopfx Agkjd

Condition: good (used), Year of construction: 2014, Overall dimensions: 12.4 x 18.8 m incl. safety fencing Number of baskets per oven: 2x 1,170 x 1,150 x 2,000 mm Reference load weight (net/gross): 1,285 / 2,185 kg Max. load weight (net/gross): 2,000 / 2,700 kg Load: 2,050 x 1,150 x 2,800 mm, external dimensions: 2,950 x 6,400 x 7,800 mm Max. temperature: 600 °C Operating temperature: 510 °C Total heating capacity: 2 x 81 kW = 162 kW electric Quenching water bath: Type = QT-24.16.57/71E Dedjyiaf Ijpfx Agkscd Temperature bath max.: 70°C, chamfering volume = 20 m^3 2 ageing furnaces: Type = ADBF-24.16.30/250E External dimensions: 2,800 x 4,850 x 4,000 mm Oven temperature max.: 250°C Operating temperature: 180 °C Total output: 2x 40.5 kW = 81 kW Electrical storage/retrieval section, Gea cooling coil, protective housing, safety equipment, system control 1,056 annealing baskets with stanchion pallets System already dismantled, packed and stored

Condition: excellent (used), Double-sided end chamfering milling machine Comec FIS 4 900 Dsdpfx Ageyf T E Njkjcd Number of milling units per side: 2 Automatic material loading from the feeder

Condition: used, Year of construction: 1995, pressure 60T t chamfer lenght 2000 mm distance between columns 1640 mm height of stroke 325 mm work feed 15 mm/s control SOMABEND total power requirement 12,5 kW weight of the machine ca. 4,3 t Serial No: 22161 Dcodpfx Agjyk Ikdjkod

Condition: good (used), Year of construction: 2000, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1100 mm stroke of upper beam 100 mm throat 195 mm working feed 10.0 mm/sec return speed 70.0 mm/sec Dedoyk E Umopfx Agkjcd 180 bar work height max. 840 mm table width 110 mm dayligth 295 mm Control ATL 550 total power requirement 5.5 kW weight 2500 kg range L-W-H 2100 x 1200 x 1800 mm Equipment: - NC-controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control - model "ATL 550" * Positioning of the backgauge (X axis) * Positioning of the depth adjustment (Y1 Y2 axis) * Possibility of programming different programs * Memory capacity max. 200 programs - max. 400 blocks * Swivel control panel, left front - Electro-motorized backgauge (X axis) * with 2x stop fingers, manually adjustable (R Z axis) - Tool holder system A - with top wedge crowning - Split insert/bending tools - Lateral safety guards - rear safety guard - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: good (used), Year of construction: 2000, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1100 mm stroke of upper beam 100 mm throat 195 mm working feed 10.0 mm/sec Dsdpoyk E Utofx Agkecd return speed 70.0 mm/sec 180 bar work height max. 840 mm table width 110 mm dayligth 295 mm Control ATL 550 total power requirement 5.5 kW weight 2500 kg range L-W-H 2100 x 1200 x 1800 mm Equipment: - NC-controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control - model "ATL 550" * Positioning of the backgauge (X axis) * Positioning of the depth adjustment (Y1 Y2 axis) * Possibility of programming different programs * Memory capacity max. 200 programs - max. 400 blocks * Swivel control panel, left front - Electro-motorized backgauge (X axis) * with 2x stop fingers, manually adjustable (R Z axis) - Tool holder system A - with top wedge crowning - Split insert/bending tools - Lateral safety guards - rear safety guard - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 2011, pressure 135 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 10.0 mm/sec Dodpfjyk Dhrsx Agkecd return speed 135 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90.0 mm control ModEva 12S oil volume 200 ltr. voltage 400 Volt total power requirement 11.0 kW weight 8800 kg range L-W-H 4250 x 2150 x 2800 mm current new price approx. 80.000 euros special price on request - in checked conditions - machinevideo - ?v=ALo1SpWfnTk ----- SPEED BEND electro-hydraulic press brake with : * increased installation height * increased cylinder stroke * increased throat depth ----- Equipment: - CNC electro-hydraulic press brake - CYBELEC "ModEva 12S" CNC control unit * High-resolution screen * Clear, concise menus in the language of the operator * Tools and products library - CNC controlled axis : Y1 - Y2 - X - R CNC crowning - CNC electro-motorized backgauge * Backgauge with R-axis, on ball screws * Traverse paths : X = 800 mm // R = 250 mm * Traversing speed X axis ... 230 mm/s * with 4x manually adjustable stop fingers - 3x 835 mm .. RehfuÃ? upper tool "PS 135.85-R08", system "A" * including quick-change clamp * Including crowning device in the tool holder - 3x 835 mm ... split universal die block "M 460 R" * including 1x "C 1050-R" die shoe - Rear safety device : Light barrier - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with SLIDING system (HIWIN plain bearings) - 1x free-moving double foot control - CE mark / declaration of conformity - Operating instructions

Condition: ready for operation (used), Year of construction: 2010, pressure 40.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 200 mm stroke 100 mm dayligth 308 mm Dcsdpfx Aex Emqtsgksd ajustment speed 150 mm/sec working feed 1-10 mm/sec return speed 100 mm/sec table width 100 mm table height 900 mm control DNC 60 PS oil volume 100 l voltage 400 V total power requirement 5.5 kW weight of the machine ca. 2750 kg - in checked conditions - machinevideo - ?v=WRzqKruFUvY Equipment: - CNC electro-hydraulic press brake - CYBELEC "DNC 60 PS" CNC control * Swiveling control panel, front left * Tool & program library - CNC electro-motorized backgauge (X-axis) * X-axis travel = 800 mm * 2x manually adjustable backgauge fingers (R+Z axes) * Backgauge on ball screws - CNC controlled axes Y1 - Y2 - X - Rehfuß upper tool system "A" with quick-change clamping * Additional crowning device in the tool holder - 4V universal die block with 60 mm die shoe - 2x sliding material/support arms ("Sliding System") - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine - FIESSLER AKAS laser safety device in front of the machine - 1x freely movable Double Foot Switch - Operating Instructions (PDF)

Condition: ready for operation (used), Year of construction: 2010, pressure 220 t chamfer lenght 3720 mm distance between columns 3020 mm column arm 400 mm ajustment speed 125 mm/sec working feed 10.0 mm/sec return speed 132 mm/sec back stop - adjustable 800 mm stroke 275 mm dayligth 550 mm Dcjdpfx Aexfwc Dsgkjd table height 900 mm oil volume 300 ltr. total power requirement 18.5 kW weight of the machine ca. 12800 kg. range L-W-H 5850 x 2220 x 2820 mm - in checked conditions - machinevideo - ?v=d-ZVBtFsjI4 Features: - Electro-hydraulic CNC press brake - With DELEM CNC control model DA 66W * 2D graphic programming * Automatic bend sequence calculation and collision detection * High-quality color LCD screen (TFT) - Swivel control panel, front left - CNC-controlled axes: Y1 + Y2 + X + R + crowning - CNC electric motor-driven backgauge (X axis) - CNC electric motor height adjustment of the backgauge (R axis) - CNC electric motor-driven bending table crowning - 2x manually adjustable stop fingers - AMADA/PROMECAM upper tool holder - 1x reversible MULTI-V die block - 2x front sliding support arms (“sliding” system) - Side guard * Swivel doors + FIESSLER laser safety device - Rear safety device (light barrier) - 1x freely movable foot control - Original operating instructions * Special accessories included in delivery: - 1x NEW complete upper tool set - split (currently not installed) * ROLLERI PS.135.85.R08 * Height 135 mm / 85 degrees / R 0.8 mm

Condition: ready for operation (used), Year of construction: 2016, pressure 20.0 t chamfer lenght 850 mm distance between columns 850 mm back stop - adjustable 375 + 400 mm stroke of upper beam 196 mm dayligth 470 mm ajustment speed 200 mm/sec table height ca. 900 mm total power requirement 5.0 kW weight of the machine ca. 2500 kg New price ~ 85.000 euros well-kept / very good condition (!!) with electromechanical direct drive (servo motor + ball screws) Machine is operated without hydraulic oil - in checked condition - machine video - ?v=foxzKIA7vX8 Description : Dcedpoxacifsfx Agksd High performance, fast travel speeds and the best ergonomics this bending machine to a perfect tool in terms of productivity and Accuracy. This allows an unrivaled high productivity in the field of small and middle bending parts can be achieved, since even complicated bending sequences several stations can be processed very quickly. A large number of different and universally divided tools are possible an almost unlimited variety of areas of application. Furnishing : - Stable machine frame for standing and seated operation - Deformation-optimized press beam - Highly dynamic, electromechanical. Direct drive (servo motor + ball screws) - CNC control Panasonic Toughbook incl. USB and WIFI connection - CNC controlled axes : Y + X + R + Z1 + Z2 - CNC control unit in front right, swivelling - Inductive length measuring system with temperature compensation - Ergonomic machine design - AMADA system upper tool holder - AMADA system lower tool holder - 1x brand new universal tool set (complete) - front safety device (DUAL Laser/Iris Rapid Bend) - Rear security cover - Laterally pivoting protective doors - 2x foot switch, for standing and sitting operation - Support tables comfort (front) - User manual (original) * Special accessories included: - 4-axis backgauge (axes X+R+Z1+Z2) * Speed X axis .. 250 mm/sec * Speed R axis .. 600 mm/sec * Z axis speed .. 1100 mm/sec * Positioning accuracy X axis .. 0.04 mm * Positioning accuracy R axis .. 0.06 mm * Travel X axis .. 375 + 400 mm * Travel R axis .. 180.0 mm

Condition: ready for operation (used), Year of construction: 2001, pressure 50.0 t chamfer lenght 2090 mm distance between columns 1665 mm column arm 400 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 92.0 mm/sec stroke 200 mm table height 910 mm dayligth 470 mm Number of working hours 36.160 h total power requirement 6.0 KW weight of the machine ca. 4850 kg range L-W-H 3458 x 2450 x 2450 mm with only approximately 36.160 operating hours (!!) - Inspected condition - Machine video - ?v=x8Z0h2_wA6s Equipment: - CNC electro-hydraulic press brake - CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) * CNC-controlled backgauge adjustment (X-axis) * CNC-controlled vertical adjustment of the stop fingers (R1+R2) * CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) * Hand control unit for manual axes movement * Pivoting control, front left - AMADA/PROMECAM quick clamping system for the upper tool * 1 split set of offset upper tools (UKB 10.512) - AMADA/PROMECAM bottom tool holder * 1x split set of 1-V dies (UKB 20.810) - Side guards (hinged doors) - Rear guards (hinged door) - CE marking - 1x freely movable double foot switch - Operating instructions (PDF) Dcjdpexabutefx Agksd

Condition: ready for operation (used), Year of construction: 2004, pressure 60.0 t chamfer lenght 2600 mm distance between columns 2050 mm column arm 310 mm working feed 10.0 mm/sec return speed 61.0 mm/sec Dcodow U U Ttjpfx Agked stroke 100 - 140 mm dayligth 450 mm table height 860 mm oil volume 100 ltr. Control ELGO P8822 operating pressure max. 200 bar Number of working hours ca. 2.370 h voltage 380 V total power requirement 5.5 kW weight of the machine ca. 5000 kg. range L-W-H 3000 x 1850 x 2050 mm good / well-maintained condition (!!) with only approx. 2,370 operating hours current new price approx. 60.000 euros special price on request in checked conditions - machine video - ?v=PsUeM3O5wAM Equipment: - NC electro-hydraulic press brake - with ELGO NC control unit "P8822" * Input of target/actual values ??for back stop * Input of target/actual values ??for depth adjustment ` * swiveling operation, front left * manual mode selectable - NC controlled axes: Y1 + Y2 + X - NC electro-motorized back stop, on ball screws * with 4x manually adjustable stop fingers * adjustment in R+Z axis (manual) - Upper tool holder SYSTEM A (AMADA), with upper wedge crowning * 1x split set of upper tools * clamping jaws with clamping lever (quick clamp) - 1x universally rotatable MULTI V die block - 2x side-hinged doors (protective device) - 1x rear sliding door (protective device) - 2x front stable support arms - 1x freely movable foot control (on rollers - movable) - Operating instructions (PDF)

Condition: new, Equipped with a belt grinding tool it enables the clean, ready-to-cut finish of eight different, quickly adjustable radii by means of an oscillating sanding belt. The universal machine type RFM 320 S SET, equipped with an extra-­long machine table ensures time-saving complete machining of curved or chamfered edges in one operation. Base version RFM 320 S SET: Dsdpfxsf E Nqde Agkocd › Adjustable grinding tool for 8 radii (2, 3, 4, 5, 6, 8, 10 and 12.5 mm) › Chamfering equipment up to 16 mm depth (continuously) › Grinding belt oscillation with pneumatic belt cleaning › Integrated base for feed unit › 16A socket for feed unit › Suction connections Ø 80 mm inkl. premiling aggregate incl. wheels incl. pull- out table elongation Set-up dimensions approx. L x B x H in mm 1.300 x 690 x 1.010 Weight 145 kg

Condition: new, Hebrock Model F 2 next Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special offer price and full manufacturer warranty. The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to 2 mm milling depth), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touch screen) Hot melt glue application to the workpiece for edgebanding material up to 3 mm jointing cutter (incl. slide - tool) up to 2 mm milling depth maintenance-free glue basin with change basin pre-equipment incl. glue discharge device HF crosscut saw station (approx. 12000 rpm) HF milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version) robust chain drive ball bearing mounted double roller top pressure Dodel D Rp Espfx Agkocd viewing window from rear side of machine extractable workpiece support Including special equipment: F2/12 surface scraper (incl. pneum. lift) F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling) F2/27 Nesting for milling stations