Used Chamfer for sale (363)

Condition: new, pressure 40.0 t chamfer lenght 1270 mm distance between columns 1050 mm column arm 350 mm dayligth 387 mm work stroke 170 mm table height 850 mm back stop - adjustable 800 mm adjustment speed 230 mm/min ajustment speed 140 mm/sec Ibodpfx Ajw U U Rleaboc working feed 10.0 mm/sec return speed 170 mm/sec total power requirement 5.5 kW weight of the machine ca. 3220 kg dimensions of the machine ca. 2150 x 1650 x 2300 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA 58T (TouchScreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: new, overall weight: 50,960 kg, maximum load weight: 37,680 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of vehicles, including those available for immediate and short-term delivery, on our website. Extract from the equipment features. Complete specification available on request. Isdpsv Etx Eefx Aabsbc Gooseneck * With approximately 30 mm thick hardwood flooring. Gooseneck with straight rear section * 3 pairs of lashing rings (LC 5,000 daN) Loading Area * Extendable design * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension straps (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, treadplate covering above the axles Landing Gear * JOST mechanical landing gear with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Air suspension with lift and lower valve Brake System * In accordance with EU regulations, with EBS-E (4S3M) without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection for the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer * High-quality two-component (2K) top coat, single colour RAL 3002 carmine red * Rims in silver Accessories Included * 2" king pin * Galvanised steel front wall, approx. 400 mm high * Yellow-red air couplings on galvanised front connection strip * 4 chocks with holder on the front wall * Spare wheel holder in front of the front wall * Electro-hydraulic unit * Steering from the front and rear via cable remote control with push buttons, including single-track control of the axles (without installation in the tractor unit) * European reflective signs (red-yellow) at the rear of the trailer * Yellow reflective tape according to EU regulations on sides, extensions, and rear of the trailer * Bracket for warning signs including socket, left and right on the gooseneck and rear plate * Bracket for rotating beacon at the rear of the trailer * Galvanised foldable support legs under the loading area's chamfer * Load gauge for determining axle loads including load diagram * 7 pairs of WADER container pockets for: 1x 20' or 1x 40' container on the loading area, 1x 40' container over the gooseneck, or 2x 20' containers * Support block with 1 pair of WADER container pockets, fifth wheel load approx. 20,000 kg * 7 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the outer frame of the loading area * Galvanised, extendable width extensions, approx. 230 mm per side * Sliding hook-in rails for aluminium loading ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the loading area (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable pump protection * 2 LED reversing lights mounted at the rear * Acoustic reversing warning signal * HRM Metallisation (High Resistance Metallisation)

Condition: excellent (used), Year of construction: 2014, operating hours: 39,000 h, functionality: fully functional, machine/vehicle number: 3325, Model S-191FTL-PRM Ø 50 mm Axis travel Milling vertical axis Z = 200 mm Milling transverse axis Y = 200 mm Milling longitudinal axis X = 410 mm Power / Thrust Z-Y 2.5 kW / 550 daN X 4.5 kW / > 550 daN X-Y-Z Traversing speed: 40 m/min Acceleration: 10 m/s² Resolution X-Y-Z: 0.0001 mm Measuring system: glass scale MAIN SPINDLE C (Horizontal turning axis) Power: 15 kW Torque / peak: 22 / 28 Nm Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Bar capacity: Ø 32 mm (option 50 mm) Turning spindle speed: 72,000°/min Clamping force, turning: 4,900 N at 6 bar B-AXIS SPINDLE INCLINATION (machining) Power: 4.3 kW Torque: 119 / 226 Nm Angular travel: -25° / +115° Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Rotational speed: 36,000°/min Locking torque: 200 Nm MACHINING SPINDLE Power: 8 kW Torque: S1 = 9.5 Nm / S6 = 11.5 Nm Max speed: 30,000 min-1 (option 40,000 min-1) Tool clamping force: 1,000 N Locking torque: mechanical locking with straight toothing Tool holder taper: HSK-40 (A or E) Through-spindle lubrication: 30 to 100 bar (optional) TOOL CHANGER Number of tools: 30 (option 60) Number of indexed tools: all Tool change time: 1.2 sec. Chip-to-chip time: 4.4 sec. Max tool diameter: Ø 40 mm (80 mm if adjacent station empty) Max tool length: 130 mm Max tool weight: 1.5 kg MISCELLANEOUS Installed power: 25 kVA Operating voltage: 3/N/PE/400V/230V 50 Hz Pneumatics: 6 bar (dry air) CNC CONTROL: Fanuc 31i Screen: 15'' color Keyboard: alphanumeric Control panel features: - 1 key switch for functions - 1 feedrate potentiometer 0–120% - 1 spindle speed potentiometer 50–120% - 1 quick-selection button for machine functions - 1 integrated electronic handwheel CNC Options Isdpow T Sl Defx Aabebc - Data server with ATA Flash, 1GB memory capacity - J947 1 MB RAM memory - S677 TCPC (tool center point control for 5-axis machining) - S808 Al nano HPCC (Al high precision contour control II) - J930 tool tip radius compensation - J893 coordinate system rotation - J819 Helix (cylindrical) interpolation - J953 memory capacity for 1,000 programs - J828 tapping without compensation chuck - S615 insertion of radii and chamfers - J894 workpiece coordinate system - S993 part setup error - R522 inclined machining plane control with guidance Interfaces - Bumotec-specific programming to minimize collisions - Simplified tool management to prevent input errors - Tool management by threshold value, change according to part count or tool life - Automatic tool setting on machine for easier tool handling - Part counter and production management Y-AXIS (horizontal cross milling axis) Travel: 200 mm Power / thrust: 4.8 kW / 240 daN Resolution: 0.0001 mm Max travel, V1: 50 m/min Max travel, V2: 20 m/min Measuring system: glass scale Z-AXIS (horizontal longitudinal milling axis) Travel: 400 mm Resolution: 0.0001 mm Max travel, V1: 50 m/min Max travel, V2: 20 m/min Measuring system: glass scale Includes 8kW cooling unit Emergency braking system integrated Subject to errors and omissions, technical specifications are provided without obligation.

Condition: used, Year of construction: 1987, Technical details: pressure: 200 t Isdpfx Aaeu Icc Aebsbc chamfer lenght: 4000 mm distance between columns: 3530 mm control for program: DNC 7000 max. stroke: 220 / min: 200 mm throat: 320 mm ajustment speed: 70 - 80 mm/sec working feed: 10 mm/sec return speed: 49 mm/sec back gauge: 700mm motorisch table-size: L x B: 4110 x 180 mm work height max.: inkl. Tischverlängerung mm interface: RS 232 connection voltage: 380 V total power requirement: 15 kW weight of the machine ca.: gesamt: 17,0 t machine dimensions LxWxH: 4,6 x 1,6 x 3,3 m incl. 2 pieces table extensions rear support 700mm travel motorized and 2 pieces support blocks with travel 1500mm motorized right/left operation via control panel swiveling and 2x foot operation Hydraulics: max. pressure 318bar; oil filling approx. 170 liters; pump capacity 19.3 l/min. Control DNC 7000, graphic display, PC software equipment: Cutting zone lighting stroke counter div. Tools optional *

Condition: excellent (used), Year of construction: 2020, 158.000 running metres BASE MACHINE AURIGA 1308XL TECHNICAL DATA Edge banding machine for edgebanding and finishing of sheet materials Edge thickness of roll material: 0.4-3mm (depending on material) Edge thickness of strip material: 0.4-8mm (depending on material) Edge cross-section: max. 6x42mm Edge height: max. 65mm Workpiece thickness: 8-60mm (restrictions possible for individual units) Workpiece width: min.65mm Workpiece length: min.160mm (without corner copying 1832) Workpiece length: min.180mm Feed speed: 10m/min. MACHINE OPERATION Edge Control 19 with 18.5" touchscreen colour monitor 16:9 Powerful control system with extremely simple operation for efficient machine set-up and changeover. Rotating and swivelling control panel at eye level Motorised pressure bridge adjustment iTronic - Adaptive pressure and adhesive quantity control Automatic, programme-dependent fine adjustment Optimum adaptation to edge thickness, edge materials and adhesive types guarantees the best processing results Automation package consisting of - Automatic glue quantity control - adaptive snipping knife - adaptive printing unit incl. residual adhesive quantity display incl. fully automatic PUR flushing routine Premilling unit FG201 with 2 milling heads for joining the panel edge 1x counter-rotating, 1xsynchronised, Ibjdpfxexayvpj Aabsc Milling cutter, diamond Ø70x64x30 mm,Z2+2 Edge feeder 1903 automatic transport of rolls and strips max. loading capacity: 40 mm Glu Jet GJ301 glue application system (2,3kW,50Hz) Automatic glue height adjustment Glu Jet hybrid technology for EVA and PUR adhesives Adhesives in cartridge and granulate form for neutral and coloured adhesives Hopper for 1.4 kg cartridges (4 cartridges) Hopper for 1.5 kg granulate Pneumatic pressure unit 1912-3 First roller driven with pneumatic immersion control, 2 conical holding pressure rollers Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatic swivelling 0/10° Dust extraction hoods for end trimming unit 1918 Multifunctional trimming unit 1827 MOT4 for trimming the top and bottom longitudinal edge with motorised positioning of the horizontal tracing shoes with motorised positioning of the trimming motors in axial direction incl. pneumatic adjustment (top and bottom separately) for flush-radius routing incl. blow nozzles - Flush cutting unit - Radius - Tilt the chamfer 0 - 15°, manually (with max. edge thickness 6 mm) Pneumatic swivelling device for trimming unit 1827 MOT4 Pneumatic swivelling to bevel 15° from the control unit Pneumatic vertical tracer rollers Adjustment of the vertical tracer roller by 0.1 mm for routing with edge overhang Corner rounding unit (1x0,35kW,200Hz,12000min-1) Corner copying function up to 3 mm edge thickness Workpiece thickness: 12 - 60 mm, with DIA tool R=2mm Scraper unit 1929 MOT4 incl. high-gloss package with motorised adjustment of the horizontal feeler rollers, incl. pneumatic adjustment (separate top and bottom) Surface scraper FK701 With pre- and post-scraping for removing the adhesive residue along the complete panel length for a clean glue joint. Buffing unit 1940 (2 x 0,09 kW, 50 / 60 Hz, 1400 min-1) For finishing and polishing edges, with 2 textile discs, swivelling 0 - 5°

Condition: used, Year of construction: 1998, Used machine Ibedpfjw Tfw Hox Aabsc Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: good (used), Year of construction: 2014, Overall dimensions: 12.4 x 18.8 m incl. safety fencing Number of baskets per oven: 2x 1,170 x 1,150 x 2,000 mm Reference load weight (net/gross): 1,285 / 2,185 kg Max. load weight (net/gross): 2,000 / 2,700 kg Load: 2,050 x 1,150 x 2,800 mm, external dimensions: 2,950 x 6,400 x 7,800 mm Max. temperature: 600 °C Operating temperature: 510 °C Total heating capacity: 2 x 81 kW = 162 kW electric Quenching water bath: Type = QT-24.16.57/71E Temperature bath max.: 70°C, chamfering volume = 20 m^3 Iedpfx Aajw R Sypjbobc 2 ageing furnaces: Type = ADBF-24.16.30/250E External dimensions: 2,800 x 4,850 x 4,000 mm Oven temperature max.: 250°C Operating temperature: 180 °C Total output: 2x 40.5 kW = 81 kW Electrical storage/retrieval section, Gea cooling coil, protective housing, safety equipment, system control 1,056 annealing baskets with stanchion pallets System already dismantled, packed and stored

Condition: used, Year of construction: 2025, color: grey-black, empty load weight: 1 kg, fuel type: gasoline, gearing type: mechanical, TITLE: NEW OPEN-TOP HOOKABLE CONTAINER FOR AGGREGATE WITH A SQUARE TANK WITHOUT CHAMFERING, REAR OPENING WITH DOOR AND TILTING WITH 200 MM BEAMS AND SUPPORTED FLOOR, REINFORCEMENT IN THE FRONT PART AT THE YIELDING POINT, 55 MM HOOK REF: 24-N-35 TYPE: for aggregates C NEW: yes LID: no OPENING: rear door and tilt OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 5.00 m INTERNAL / EXTERNAL WIDTH OF THE BODY: 2.35 m / 2.55 m INTERNAL / EXTERNAL FRONT SIDE: 1.50 m / 1.70 m INTERIOR / EXTERIOR REAR TAILGATE: 1.00 m / 1.20 m INTERIOR / EXTERIOR SIDE TAILGATE: 0.80 m / 1.00 m MC: 12 WEIGHT: 1860 kg BOTTOM: 5 mm WALL: 4 mm COLOUR: green ral 6029Errors and/or omissions excepted The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles, mainly specialized in the waste sector. Specialized in trucks, trailers and hook lift equipment. With a fleet of over 50 trucks and over 150 skips, containers with and without hook-lift cranes ready for delivery. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff. Iodevucmwspfx Aabebc

Condition: as good as new (ex-display), Edge and contour milling machine Make: Assfalg Model: KKE 1 Ijdpfsw Rl Rzsx Aabebc Condition: Demonstration machine Speed: 8,000 - 24,000 rpm (stepless) Max. chamfer width: 3 mm Standard equipment includes: - Guide ruler - Socket wrench, open-end wrench - Work ring Ø 30 x 8 mm - Collet Ø 6 mm with union nut - Operating manual

Year of construction: 1999, condition: good (used), Edgebander Biesse Polymac ERGHO 5, year 1999 Biesse Italy S/N 80709 max. panel thickness 10-45 mm min and max banding strip heught 13-60mm max thickness of banding material in rolls: 0,4mm- 3mm min. panel width 50 mm min. length 150 mm operating speed m/min 10/20 Technical information: Glue Pot VC 700 End trimming unit 701 Edge trimming unit RS 700 Corner rounding CR 200 Tilting Edge Trimming unit +Chamfering RI 700 Compact edge scraper RBK501 Brushes SP700 Edge Sanding unit LV 700 heated infeed guide PLC control panel support guide Large diameter roll holder edge cutting device for 3mm thick rolled edges 400 V , 50 Hz CE- marked Dimensions of the Maschine: ( Lx W x H ) = 4950mmx 1700mm x 1530mm 2900 Kg Ibodjgtx Aqepfx Aaboc Technical information under subject of correction

Condition: used, overall weight: 58,000 kg, maximum load weight: 45,830 kg, axle configuration: > 3 axles, first registration: 06/2024, next inspection (TÜV): 07/2026, Year of construction: 2024, Equipment: ABS, You can find our complete inventory of immediately and soon available vehicles on our website. Below is a selection of features. Complete specifications available upon request. Gooseneck * Designed in SNT format to optimize loading platform length * Length approx. 4,100 mm, front with chamfered corners approx. 400 x 400 mm * Rear chamfer approx. 1,000 mm x 10° * Steel front wall, removable, approx. 400 mm high * Plug-in aluminum rear wall on the gooseneck, approx. 400 mm high, anodized finish * 2 pairs of lashing rings (LC 16,000 daN) integrated inside on the outer beams of the gooseneck, rotated approx. 45° * 1 pair of lashing rings (LC 10,000 daN) integrated inside at the front of the gooseneck outer beams, rotated approx. 45° * 2 pairs of stake pockets integrated in the gooseneck, for plug-in stakes approx. 100 x 50 mm * 2 additional pairs of bolt-on lashing rings (LC 5,000 daN) * 2 pairs of lashing rings with retaining spring, suspended on the outer beams of the gooseneck (LC 5,000 daN) * 1 pair of plug-in aluminum side boards on the gooseneck, approx. 1,200 mm long, approx. 400 mm high, anodized finish * 3.5-inch kingpin Loading Platform * Telescopable loading platform, length approx. 9,300 mm, with rear chamfer approx. 500 mm x 10° * Recess in the chamfer and extending into the platform for excavator stick approx. 2,490 x 750 x 210/290 mm (L x W x H) * Continuous hardwood flooring approx. 50 mm thick on the platform and interrupted between axles (increases friction coefficient) * Platform locked with conically welded locking profiles every approx. 250 mm * Including pre-tension plate * 1 pair of recessed horizontal lashing rings in the fixed front part of the platform (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, foldable outward (LC 10,000 daN) * 5 pairs of stake pockets integrated in the outer frame of the platform, for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket rail mounted in the fixed support of the platform, for plug-in stakes approx. 100 x 50 mm * Wheel wells with square climbing strips approx. 15 x 15 mm * Wheel wells in front of the axles continuously open up to the cross member of the gooseneck, approx. 1,310 x 700 x 410 mm (L x W x D) * Wheel wells between the 2nd and 3rd axle approx. 1,310 x 700 x 250 mm (L x W x D) * Aluminum covers for the wheel wells, which can also be used as bridge elements for the extension OR as widening planks * In front of and behind the rear wheel well, 1 pair of horizontal lashing rings each (LC 10,000 daN) in the outer frame of the platform * WADER container pockets in the platform and gooseneck for transporting 2x 20' containers * 1x over gooseneck with long goods rack * 1x in the platform * Extension (galvanized) extendable by approx. 230 mm per side * Loose widening planks, steel reinforced * 4 pairs of plug-in WADER container locks * Long goods rack in the lowbed, level with gooseneck, required for transporting 2x 20' containers * 1 pair of aluminum loading ramps VFR 120, approx. 2,400 x 620 x 120 mm (L x W x H) Chassis * BPW axles and suspension * 1st and 2nd axle rigid * 3rd and 4th axle friction-steered with electromagnetically activated reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF dual tires * 1st axle with automatic lift axle function Ibedpfxsxc Ax Eo Aabjc Braking System WABCO EBS-E according to EU regulations Landing Legs * Me

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Condition: Factory overhauled by Lange Maschinenbau Minimum workpiece width approx. 75 mm Minimum workpiece thickness 8 - 50 mm Minimum workpiece length approx. 120 mm/180 mm for corner rounding Edge thickness 0.4 - 2 mm Stepless chip removal of the joining unit 0 - 2.0 mm Joining unit with two counter-rotating, insert-controlled joining units Diamond tool height = 55 mm Direct glue application to the workpiece, glue pot with 1.5 kg capacity EVA/PUR glue pot with discharge function Ijdew Sbblepfx Aabsbc Pressure unit Cross-cutting unit with HF motor, 2 saw blades, and high-precision linear guides Combination milling station for radius and chamfer milling Corner rounding unit Surface scraper unit Suction pipe system with 90° bend and manual slide valve mounted on the machine Machine length: 3273 mm Availability: Short term Location: Hochheim

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1000023523, Biesse Stream B MDS 2.0/15.0 is a single-sided edge banding center with automatic device with manual feeding to dimension and square panels in flexible way bу 4 run. Main technical data Сhаin advance speed: 10-25 m/min Panel length: 250-2700 mm Panel width: 120-1200 mm Panel thickness: 10-60 Isdpfxepz Shks Aabjbc Panel weight: 75 kg Edge thickness: 0,3-3,0 mm Gluing unit: PU gluing kit, installed in place of to the standard device(EVA). The machine is equipped with a tool for processing edges with a radius R=1/1.5/2.0mm and a chamfer of 25 degrees. Technical condition: the machine is currently used in production.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: TTS-10371, grinding wheel diameter: 200 mm, rotational speed (max.): 5,000 rpm, TECHNICAL DETAILS Application area: Pre-grinding tasks such as for step drills, narrowings, relief grinding, chamfering, etc. Spindle speed range: 1,000 – 6,000 rpm Maximum grinding wheel dimensions: 300 mm Voltage: 380–420 V, 50 Hz Full load: 15 A Phases: 3 MACHINE DETAILS Weight: 1,700 kg EQUIPMENT - EPSON manipulator Iedpexam Tbsfx Aabobc

Condition: used, SCM Selecta C edge banding machine Edge banding height 10-60 mm edge banding thickness 0,4-25 mm Caps Overlapping edgebanding bevels - 25 mm for solid wood Iedpfoddn Svsx Aabebc Pivoting edgebanding unit for foil and ABS edges Radius scraper chamfering Buffing unit Space requirement Length 6345 Height 1530 Depth 1106 mm scm_selecta (1)

Condition: excellent (used), Volpato LS-1NR edge grinder with chamfers Ibodpswhx Hxjfx Aabjc Working height 10-100mm Aggregate system: 1.5kw grinding unit 1.5kw upper chamfering unit 1.5kw lower chamfering unit Mechanical grinding belt oscillation Chafer speed regulated by means of an inverter up to 9900r.p.m Feed speed regulated by means of a variator 5-30m/min Grinding unit at various angles 2450x80mm grinding belt length

Condition: new, overall weight: 48,000 kg, maximum load weight: 36,410 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck * Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long * Rear with chamfer approx. 1,000 mm x 10°, for tractors: 4 x 2, 6 x 2, and 6 x 4 * Front wall made of steel, removable, approx. 400 mm high * ASPÖCK-UNIBOX on the front connection panel with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * Outer beams on the gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of recessed lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm hardwood flooring over the gooseneck * 2-inch kingpin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * 1 pair of stakesockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (inside the chassis beam) Loading platform * Extendable loading platform, approx. 8,800 mm long with chamfer at the rear approx. 500 mm x 10° * Recess in the platform including the chamfer for receiving the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Continuous hardwood flooring approx. 50 mm thick on the loading platform, interrupted only between the axles * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Platform locking with conically welded securing profiles at approx. every 250 mm * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed, outward-folding lashing rings in the outer frame of the loading area (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading area between the 1st and 2nd axle * Aluminium covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, also serving as extension planks * Hardwood flooring on the loading platform chamfer Iedpfx Aexc Axrsabsbc * Painted-on sand coating on the outer frame of the loading area as well as on the chequered plates of the platform Chassis * BPW axles and suspension * 1st and 2nd axle rigid * 3rd axle self-steering * 3rd axle with electro-magnetic reverse lockout, activated via reverse gear and manually * Air suspension with lift and lower valve * 1st axle with start-up aid * 2 axle load gauges mounted on the left side, including axle load diagram Tyres * 235/75 R 17.5 3PMSF twin tyre configuration * TPMS tyre pressure monitoring system in accordance with ECE R 141 Lighting * 1 LED work light each on the left and right in front of the axles, wired to the tractor unit Loading ramps * Hydraulic loading ramps DR-15/60-900-4350-HB-HV-M, a pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide * Hardwood covering * Hydraulically foldable ramp tips * Ramps can be moved individually hydraulically approx. 235 mm outward and approx. 215 mm inward * Hardwood covering on the platform chamfer * Ramp with hardwood covering Brake system WABCO EBS-E according to EU regulations Lighting system * 24-volt lighting system * ASPÖCK-NORDIK full LED

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 10006565, Weinig Powermat 1500 Ibodpfjrq Ebfsx Aaboc Working width 30 - 310mm (with tool flight circle 93-125mm) Working height 100 - 200mm (with tool flight circle 93-125m) Number of spindles 6 Spindles bottom 2 Spindles right 1 Spindles left 1 Spindles top 2 Spindle arrangement u-r-l-o-o-u Spindle speed max 8,000 rpm Spindle diameter 40 mm Powerlock tool holder incl. chamfering unit Separate motor for each spindle Electronic feed incl. brake, infinitely variable 5-40 m/min. Durofer pointed tooth rollers Short infeed table 1.2 m long with 2 driven rollers above the table Hard-coated machine table surface Manual lubricant pump WEINIG Comfort Set Control system WEINIG MEMORY PLUS-SYSTEM CE mark Declaration of Conformity

Condition: good (used), Year of construction: 2001, functionality: fully functional, On offer: A used edge banding machine Manufacturer: Brandt (Optimat series, later Homag Group) Type: KD 68 CF Machine type: Edge banding machine Year of manufacture: 2001 Weight: approx. 2,000 kg Workpiece data: Workpiece thickness: up to approx. 50 mm Minimum workpiece width: approx. 60 mm Minimum workpiece length: approx. 160 mm Edge thickness: 0.4 – 3 mm (PVC/ABS/coil material) Strip/solid wood edges: up to approx. 9 mm possible Feed speed: approx. 12 – 18 m/min (adjustable, model dependent) Iodpfx Asxb E D Isabjbc Units and equipment: Pre-milling unit for edge processing prior to glue application Glue application station with hot-melt adhesive tank Guillotine for edge material up to 3 mm Pressure station with 3 rollers Milling units (radius/chamfer) Corner rounding unit Scraper unit for removing glue residue Polishing unit for finished edges Electrical data: Total connected load approx. 10 – 12 kW Extraction ports: multiple connections Ø 120 mm Voltage: 400 V / 50 Hz / 3 phases

Condition: used, Year of construction: 2014, Used machine Used edge banding machine of the company Format 4 type Perfect 710 E - Motion Year of construction: 2014 MNo.: 200.02.011.14 Technical data: Control unit with 10.4" touch color screen Extendable workpiece support motorized - position-controlled pressure beam chain feed with 12m/min feed speed Roller support plate with ball bearings d = 770 mm 2 motorized joint milling unit / 2 x 1.1 kW Edge feed for roll and strip material 0.4 - 10 mm (edge detection via infrared sensor) Ibodpfxow Nadtj Aabsc Teflon-coated gluing unit Pre-melting unit for EVA glue Replacement gluing unit for EVA Replacement gluing unit for PU motorized positioning-controlled pressing unit 2 motorized cross-cut saw unit / 2 x 0.50 kW 2 motorized multifunctional units for radius, flush and chamfer trimming / 2 x 0.75 kW Corner processing unit Radius scraper Surface scraper 2 motorized polishing unit (buffing wheel) Spraying unit for release agent on the machine infeed side Spraying unit for cleaning agent in front of the polishing unit Availability:short term Location: Flörsheim

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 32,000 kg, loading space length: 9,000 mm, loading space width: 2,550 mm, emission class: euro6, color: white, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, 4-axle Volvo machine carrier/working platform transporter – FH 500 8x2R – Trailing axle, electro-hydraulically steered, single tires – Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle – Safety long-distance driver's cab FH – Cab heater, 2 kW – 33 l refrigerator with freezer compartment under the bunk – Air suspension on front axle(s) – Gearbox/I-Shift operation from the driver's seat control unit – I-Shift driving modes: Standard, Performance and Economy – I-See with map-based topography and traffic information – Eco cruise control (cruise control), including brake cruise control – Manual shifting in automatic mode possible (incl. kickdown) Adaptive traction control – Distance-regulating cruise control (ACC) with collision warning and emergency braking function – Lane keeping assistant – Side collision avoidance and turn assist (both sides) – Driver alertness system, warns of fatigue * VEB Volvo Engine Brake * etc. WIESE body for platform and construction machine transport with hydraulic loading ramps with 2 pairs of wheel recesses incl. covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height approx. 1,050 mm unladen (top of floor) - Stable, weight-optimized steel welded construction, space-efficient design - Short cross member spacing for high point loads - Chamfered rear for low ramp angle - Outer frame profile 90° - Bulkhead in reinforced design - Storage box inside, below the bulkhead - Grating floor - Designed for 5,000 daN wheel load - Steel toolboxes above the axles and anti-slip coating on outer frame Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into outer frame - Longitudinal beams with Multi-X contour full length with numerous 2.5 t lashing points - 4 lashing eyes 8 t at rear (left/right/center/center) - 4 lashing eyes 8 t in front of bulkhead (left/right/center/center) - Outer frame profile 90° Ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps designed as 2 single/extended ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp or crossover ramp for warehouse equipment (extension remains closed); the fixed part is placed on the warehouse ramp - Sturdy tension bar for transport security (optionally with strap tensioning) - 2 hydraulic rear supports with plates, warning sound and indicator in cab - Ramp and support driven by electro-hydraulic system - Control via radio remote as well as emergency operation at control block - Control block mounted in stainless toolbox mounted laterally on frame - Superwinch 8.2 t with approx. 20 m steel cable Isdpfxsw Itmro Aabjbc - Access with handrails right and left for loading area access - 5 stainless steel toolboxes in drawer design, incl. lighting - Side panels as per sample images (green vehicle) - Body coating KTL - Tow coupling with ball head at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted at top of bulkhead - 4 LED work lights outside on frame for area illumination - 2 LED work lights at rear - 1 removable beacon at rear The stock vehicle is supplied with a white cab and superstructure in nova gray (external frame lacquered in RAL color of choice on request) Further information upon request.

Condition: excellent (used), - Table working surface: 1300x2500 mm. - High-performance and universal milling plotter equipped with a 12-tool magazine. The ideal machine for industrial applications: Iodpemrq Apefx Aabebc wood and furniture: -> three-dimensional plate milling; -> whole furniture to order; -> wardrobe door; -> glass door; -> shutters; -> cabinets; -> internal door; -> wardrobe door; -> craft wooden door; -> sliding door; -> office furniture; -> display cases; -> windows; -> other household products such as carving, cutting, punching, grooving, wiping and chamfering. It can also be used to cut and carve MDF, PVC, ABS. Advertisement: -> production of advertising signs and logos; -> acrylic cutting and production of advertising materials from various materials. Mold production: -> metal molds of copper, aluminum, iron, etc., And also non-metal molds for plastic plates, planks, etc. Other industries: -> bas-reliefs that are widely used in crafts ​

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, REX SUPERMASTER Year 2003 – SUMA-8/63.WW Machine number: 22,500 Year of manufacture: 2003 1. General Data • Machine type: Planing and profiling machine with chamfering units • Total connected load: approx. 222.8 kW • Feed speed: 10 – 100 m/min (adjustable, frequency-controlled) • Heavy-duty extraction unit (AZG): 4 rollers, pneumatic roller pressure, cardan drive shafts 2. Tools / Units • Planing spindles: • Bottom planing spindle: 37 kW • Top working spindle: 45 kW • Right working spindle: 22 kW • Left working spindle: 22 kW • Chamfering units (chamfering aggregates): • 4 × chamfering units (AFVo / AFVu, left/right, top/bottom) – each 1.85 kW • Speed: approx. 5600 rpm, height-adjustable for chamfer width Total number of processing tools: 8 pieces (4 planing/working spindles + 4 chamfering units) 3. Drives • Feed unit: approx. 32 kW • Auxiliary motors (separately): • Height adjustment (thickness) Ijdpfx Aew Ttvwjabjbc • Width adjustment • Chip adjustment • Machine adjustment 4. Extraction System • Individual extraction outlets Ø 160–200 mm depending on unit • Total required extraction capacity: approx. 25,350 m³/h 5. Accessories • Various planing heads and tools (see photo documentation in the appendix) • Control cabinet included

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, loading space width: 2,550 mm, loading space length: 9,000 mm, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, 4-axle Volvo machine carrier/working platform transporter – FH 500 8x2R – Trailing axle, electro-hydraulically steered, single tires – Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle – Safety long-distance driver's cab FH – Cab heater, 2 kW – 33 l refrigerator with freezer compartment under the bunk – Air suspension on front axle(s) – Gearbox/I-Shift operation from the driver's seat control unit – I-Shift driving modes: Standard, Performance and Economy – I-See with map-based topography and traffic information – Eco cruise control (cruise control), including brake cruise control – Manual shifting in automatic mode possible (incl. kickdown) Adaptive traction control – Distance-regulating cruise control (ACC) with collision warning and emergency braking function – Lane keeping assistant – Side collision avoidance and turn assist (both sides) – Driver alertness system, warns of fatigue * VEB Volvo Engine Brake * etc. WIESE body for platform and construction machine transport with hydraulic loading ramps with 2 pairs of wheel recesses incl. covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height approx. 1,050 mm unladen (top of floor) - Stable, weight-optimized steel welded construction, space-efficient design - Short cross member spacing for high point loads - Chamfered rear for low ramp angle - Outer frame profile 90° - Bulkhead in reinforced design - Storage box inside, below the bulkhead - Grating floor - Designed for 5,000 daN wheel load - Steel toolboxes above the axles and anti-slip coating on outer frame Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into outer frame - Longitudinal beams with Multi-X contour full length with numerous 2.5 t lashing points - 4 lashing eyes 8 t at rear (left/right/center/center) - 4 lashing eyes 8 t in front of bulkhead (left/right/center/center) - Outer frame profile 90° Ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps designed as 2 single/extended ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp or crossover ramp for warehouse equipment (extension remains closed); the fixed part is placed on the warehouse ramp - Sturdy tension bar for transport security (optionally with strap tensioning) Ijdpfew Itmlsx Aabebc - 2 hydraulic rear supports with plates, warning sound and indicator in cab - Ramp and support driven by electro-hydraulic system - Control via radio remote as well as emergency operation at control block - Control block mounted in stainless toolbox mounted laterally on frame - Superwinch 8.2 t with approx. 20 m steel cable - Access with handrails right and left for loading area access - 5 stainless steel toolboxes in drawer design, incl. lighting - Side panels as per sample images (green vehicle) - Body coating KTL - Tow coupling with ball head at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted at top of bulkhead - 4 LED work lights outside on frame for area illumination - 2 LED work lights at rear - 1 removable beacon at rear The stock vehicle is supplied with a white cab and superstructure in nova gray (external frame lacquered in RAL color of choice on request) Further information upon request.

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, loading space width: 2,550 mm, loading space length: 9,000 mm, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, 4-axle Volvo machine carrier/working platform transporter – FH 500 8x2R – Trailing axle, electro-hydraulically steered, single tires – Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle – Safety long-distance driver's cab FH – Cab heater, 2 kW – 33 l refrigerator with freezer compartment under the bunk – Air suspension on front axle(s) – Gearbox/I-Shift operation from the driver's seat control unit – I-Shift driving modes: Standard, Performance and Economy – I-See with map-based topography and traffic information – Eco cruise control (cruise control), including brake cruise control – Manual shifting in automatic mode possible (incl. kickdown) Adaptive traction control – Distance-regulating cruise control (ACC) with collision warning and emergency braking function – Lane keeping assistant – Side collision avoidance and turn assist (both sides) – Driver alertness system, warns of fatigue * VEB Volvo Engine Brake * etc. WIESE body for platform and construction machine transport with hydraulic loading ramps with 2 pairs of wheel recesses incl. covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height approx. 1,050 mm unladen (top of floor) - Stable, weight-optimized steel welded construction, space-efficient design - Short cross member spacing for high point loads - Chamfered rear for low ramp angle - Outer frame profile 90° - Bulkhead in reinforced design - Storage box inside, below the bulkhead - Grating floor - Designed for 5,000 daN wheel load - Steel toolboxes above the axles and anti-slip coating on outer frame Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into outer frame - Longitudinal beams with Multi-X contour full length with numerous 2.5 t lashing points - 4 lashing eyes 8 t at rear (left/right/center/center) - 4 lashing eyes 8 t in front of bulkhead (left/right/center/center) - Outer frame profile 90° Ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps designed as 2 single/extended ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp or crossover ramp for warehouse equipment (extension remains closed); the fixed part is placed on the warehouse ramp - Sturdy tension bar for transport security (optionally with strap tensioning) - 2 hydraulic rear supports with plates, warning sound and indicator in cab - Ramp and support driven by electro-hydraulic system - Control via radio remote as well as emergency operation at control block - Control block mounted in stainless toolbox mounted laterally on frame - Superwinch 8.2 t with approx. 20 m steel cable - Access with handrails right and left for loading area access - 5 stainless steel toolboxes in drawer design, incl. lighting - Side panels as per sample images (green vehicle) - Body coating KTL - Tow coupling with ball head at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted at top of bulkhead - 4 LED work lights outside on frame for area illumination - 2 LED work lights at rear - 1 removable beacon at rear Ijdpew Itl Usfx Aabjbc The stock vehicle is supplied with a white cab and superstructure in nova gray (external frame lacquered in RAL color of choice on request) Further information upon request.