Used Chip Bonnet for sale (4,435)

Condition: ready for operation (used), With hydraulic pump. Dcedehw E D Sepfx Aa Nsg

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower Djdpjb Ilw Tefx Aa Necg -Engine power: 18.5 kW -Speed: - rpm -Volume flow rate: approx. 7000 m³/h -Total pressure: approx. 2800 Pa -Inlet connection: Ø 280 mm -Outlet connection: Ø 350 mm -Dimensions: 1120/840/H930 mm -Weight: 284 kg

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 37 kW -Speed: 1470 rpm -Volume flow: unfortunately not visible -Total pressure: - da Pa -Inlet connection: Ø 700 mm -Outlet connection: Ø 700 mm Dcodjb Iqf Nepfx Aa Nsg -Dimensions: 1750/1700/H2460 mm -Weight: 900 kg

Condition: new, Year of construction: 2026, The extractor has a time switch for automatic filter shaking, allowing for any setting of the work cycle! Our technology department has placed great emphasis on creating a motor shaking system, in which the entire filter cleaning cycle takes place automatically in a closed system. A safety lock prevents larger elements from entering the fan. Built-in, soundproof, RETURN OF WARM AIR Reinforced construction with special anti-corrosion coating Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Advantages of DCV dust extractors have an additional pair of doors for easier bag replacement Durable, massive construction guaranteeing quiet and vibration-free operation of the dust collector the new TC series of extractors has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season A strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility to build a ceiling system and connect several machines working simultaneously with DCV extractors A failure-free filter shaking system with the possibility of working in an automatic cycle A mobile system mobile, facilitating trouble-free movement of the extractors throughout the plant Waste containers designed to maintain 99.99% airtightness of the system, at the same time they have been equipped with a mobile mobile system Control cabinet for switching the device on/off polyester filter retains dust with a diameter of up to 5 microns, in order to filter smaller particles, a filter, e.g. HEPA, should be used It is forbidden to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters Supply voltage 400 V Power 18.5 kW (25 HP) Engine speed 3000 rpm Filter type Polyester Filter dimensions Φ160 x 920 mm Number of filters 117 pieces Inlet diameter 400 mm Outlet dimensions 595 x 345 mm x2 Efficiency 15000 m3/h Dcedjudaqyjpfx Aa Njg Dimensions (width x length x height) 1500 x 3830 x 2410 mm (without upper elbow) Weight 980 kg

Year of construction: 2003, condition: used, wood chip sieve Djdpfx Aasx Ta Nfj Nocg

Condition: refurbished (used), Wood chip screen IDL000756 - Three layers Dodpotmtf Rjfx Aa Necg - Manufacturer: Passimo OY - Screen area: 15 m2 - After renovation.

Condition: used, machine/vehicle number: IDC000031, Chip drying barrel Length - 14 m Width - 3.6 m Drying capacity - 10t/h Dcsdpfx Aerl Ra Hsa Nog

Condition: new, Chip Screen Manufacturer: Vecoplan Module: VSS 15/2 Year: 2016 Screening area: 1.5m2 Number of screen floors: 2 pcs Length: 3900mm Width: 1750mm Height: 1950mm Weight: 2300kg Dcedpfx Aaswqmpas Neg

Condition: used, SPE Renergi Low Temperature Dryer. Djdpswp Rqfofx Aa Nscg The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: C123969, saw blade diameter: 500 mm, rotational speed (max.): 2,820 rpm, overall weight: 1,490 kg, tilt adjustment saw blade: 22 °, TECHNICAL DETAILS Speed: 2,820 rpm Number of saw blades: 2 Saw blade diameter: 450 & 500 mm Saw angle: 22° - 90° Motor Blade motor power: 2.2 kW MACHINE DETAILS Weight: 1,490 kg Motor Blade motor power: 2.2 kW Electrical data Power: 5.3 kW Current: 13 A Dcjdpfx Ajxwnhuja Njg Voltage: 400/3 V Frequency: 50 Hz EQUIPMENT Chip conveyor Note: The machine is available from 01.12.

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1410x1130x1295 mm Weight 320 kg Dsdpfx Aevz Ei Iea Nocg Total power requirement 22 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 890x1081x830 mm Weight 268 kg Djdpfx Aasvz Emas Necg Total power requirement 15 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 740x630x1028 mm Weight 60 kg Dcsdpfevz Endjx Aa Njg Total power requirement 3 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 910x1200x850 mm Weight 400 kg Dcjdpfjvz Exvjx Aa Neg Total power requirement 18,5 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 690x771x790 mm Weight 130 kg Dedpfjvz Enwjx Aa Nscg Total power requirement 5,5 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 800x847x790 mm Dodpfovz E Dlox Aa Njcg Weight 250 kg Total power requirement 7,5 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 880x1037x820 mm Weight 188 kg Dcsdpfx Asvz Ew Eoa Nsg Total power requirement 11 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1510x1250x1400 mm Dsdpfx Aevz Enqsa Nscg Weight 600 kg Total power requirement 30 kw

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Motor power: 15 kW -Inlet connection: Ø 350 mm -Outlet connection: Ø 250 mm Dedob Ig Ugepfx Aa Necg -Dimensions: 1050/1060/H1240 mm -Weight: 276 kg

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 6,000 kg, total length: 4,60,000 mm, total width: 4,000 mm, total height: 4,300 mm, Year of construction: 2024, operating hours: 300 h, type of input current: three-phase, With shredder, centrifuge, and big bag filling station. Includes spark detection and extinguishing system. Approx. 300 operating hours, year of manufacture 2024. Suitable for stainless steel, nickel alloy, and titanium. Throughput capacity up to 1 ton/hour, depending on material. Total connected load: 83 kW. Overall length: 46 m. Height: 6.2 m. Price on request. Available at short notice. Location: Germany. Dcodpfxeq Nmw Ie Aa Njg

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, Chips and bark sorting screen, screening area 6,7 m2, el.motor 3 kW, capacity up to 150 m3/h, delivery includes metal frame. Dcjdpfx Aswktyfoa Neg

Condition: good (used), Chip extraction, filter extraction, bagging filter -Drive: 0.96 kW -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V Dedpfx Asb A E Uhja Nscg -Dimensions: 780/470/H340 mm -Weight: 135 kg

Condition: used, Tipping container for forklift trucks RMS Rotherm Mechanical Systems Type KK-125 Chip bin - bulk tipping container - folding container Manufacturer no.: 84477 Year of manufacture: 2011 Load capacity: max. 2000 kg Volume: approx. 1 m³ Fork entry pockets: 200 x 60 mm Fork spacing inside/outside: 505/900 mm - Manual locking device for the tipping body - Tipping process is triggered by gravity - 4 polyurethane swivel castors, Ø 160 mm, 2 of which are swivel-mounted - Fork entry pockets/forklift attachment Dead weight: 195 kg Width: 1130 mm Depth: 1570 mm Dcjdpfx Aoxpqzzsa Neg Container height: 880 mm Overall height with chassis: 1190 mm Good condition Suitable for collecting, storing and transferring recyclables

Condition: used, Tipper container for forklift RMS Rotherm Mechanical Systems Type KK - 125 Chip container - bulk container - folding container Manufacturer No.: 84477 Year of manufacture: 2011 Load capacity: max. 2000 kg Volume: approx. 1 m³ Fork entry pockets: 200 x 60 mm Fork spacing inside/outside: 505/900 mm - Manual locking device for the tipping trough - Tipping process triggered by gravity - 4 plastic caster wheels Ø 175 mm, 2 of which are swivel wheels with wheel locks Dedpfx Aaoxcbn Ss Njcg - Fork pockets/forklift carriage pick-up Net weight: 195 kg Width: 1130 mm Depth: 1570 mm Container height: 880 mm Overall height with chassis: 1200 mm Good condition Suitable for collecting, storing, and transferring recyclables

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. Dcodpfx Aaexwhw As Njg BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.