Used Cnc Deep Hole Drilling Machine for sale (66,915)

Condition: new, Year of construction: 2026, Plasma sheet cutting, combined with drilling and tapping Ijdpoh I Eitefx Acrjth Heavy-duty gantry type cutting system combined for drilling, plasma and oxy-fuel cutting applications. Double-side drive, precise positioning system with rack and pinion on 3 linear axes and zero-backlash on the torch rotational axes. Reinforced construction of the gantry and drives to handle the heavy load during drilling applications. Low backlash, precision gears, as well as highly rigid and precise rail guiding system enable the smooth motion and excellent cut quality in corners and small holes. Transversal motion range (Y axis) -- on request Longitudinal motion range (X axis) -- on request Vertical motion range (Z axis) -- 500 mm KEY FEATURES: ▪ Fully automated technology for program creation and execution ▪ Program based on 2D part drawing ▪ Drill / tap operations assigned to single or multiple holes with the same diameter ▪ Automatic part nesting and rapid moves between holes and parts with different strategies ▪ Automatic tool change, fully programmable, no operator intervention needed ▪ Single program zero position for the complete drill and plasma cut processing in a single program. Just as normal sheet cutting process, no special settings or procedure required from the operator ▪ Automatic measurement of distance from the drill tip to the material. No measurement by operator needed ▪ Automatic tool cooling on-off control ▪ Chip -breaking drill head motion control with programmable parameters ▪ Automatic program head control ▪ Drill head moves to safe position automatically after drilling is done ▪ Plasma head automatically moves to start of cut position, searches the plate and starts cutting ▪ Plasma head moves automatically to safe position after plasma cutting is done ▲ DRILL HEAD up to 29kW max. drill tool diameter 40mm ▲ PLASMA CUTTING EQUIPMENT HYPERTHERM -- on request ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 15 days

Condition: excellent (used), Year of construction: 2014, feed length X-axis: 300 mm, feed length Y-axis: 300 mm, feed length Z-axis: 500 mm, General Aspects MAIN MOVEMENTS Maximum drilling depth - Z-axis: 500 mm Table, longitudinal movement - X-axis: 300 mm Table, vertical movement - Y-axis: 300 mm Drilling slide, piece support - W-axis: 50 mm DRILLING SPINDLE Drilling diameter without pre-drill, optimal: 3 – 12 mm Distance between the bits: 250 mm Drilling spindle, rotation speed min - max: 0 - 6.000 rpm Drilling spindle motor power: 7.5 kW (S1) Cannon drill holder, for diameters less than 6 mm: Ø 10 x 40 mm Cannon drill holder, for diameters greater than 6 mm: Ø 25 x 70 mm CLAMPING TABLE Fixed clamping table, surface dimensions: 500 x 600 mm Maximum load capacity of the fixed table: 1.000 kg Standard type clamping slots: 18 mm OIL Cutting oil flow rate: 50 lt./min Cutting oil pressure: 90 bar Hydraulic pump motor power: 7.5 kW Hydraulic pump motor capacity: 600 lt Adjustable temperature: 27°-30°C DIMENSIONS AND WEIGHTS Width x length: 4.450 x 3.000 mm Approximate weight: 2.210 Kg POWER SUPPLY Itedpfsu Au Duex Acrjh Electrical power supply: 400 V/3-phase/50-60 Hz Compressed air: 6 bar Total installed power: 25 kW

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Ijdpfx Aeu Tln Nocrsth Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: new, Year of construction: 2026, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. Itedpfx Acofu Ivzeroh • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Condition: excellent (used), bore depth 500 mm Isdjxx A D Tepfx Acrsth spindle speed: 1

Condition: good (used), Vitap automatic through-hole drilling machine 4 lower heads 2 horizontal heads Iodpfx Acsn Hq Snoroth

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 250 mm, feed length Z-axis: 160 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 480 mm, spindle speed (max.): 9,000 rpm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 1 m/min, spindle speed (min.): 100 rpm, quill stroke: 160 mm, table width: 320 mm, table length: 880 mm, X-500, Y-250 , Z- quill stroke 160 , W- traverse path machine head 480 , table 880 x 320 , max. 320 kg , fixture SF 32 , 100-9000 rpm , 5 kW , 60 Nm , Heidenhauin TNC 124 Many accessories Ijdpfoq R Rb Hsx Acroth

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, drilling depth: 1,500 mm, feed length X-axis: 3,250 mm, feed length Y-axis: 1,500 mm, spindle speed (max.): 4,200 rpm, table load: 35,000 kg, CNC SELCA 4040 DH Maximum drilling depth in single cycle, V axis: 1,500 mm Column, longitudinal travel X axis: 3,250 mm Vertical travel Y axis: 1,500 mm Drilling slide, workpiece support movement W axis: 500 mm Maximum workpiece height: 2,400 mm Clamping table and workpiece approach movement U axis: 1,000 mm Controlled radial resolution, B axis: 360,000 divisions/rev Clamping table, rotating surface size: 1,600 x 1,800 mm Clamping table, max load with rotating workpiece: 20,000 kg Standard T-slot size: 22 mm Minimum–maximum solid drilling diameter: 5 – 50 mm Rapid feed rate, adjustable max speed: 8,000 mm/min Drilling spindle rotation speed, adjustable: 1 – 4,200 rpm Drilling spindle motor power: 15 kW Gun drill tool holders: Shank for drill Ø < 6 mm: Ø 10 x 40 mm Shank for drill 6 mm < Ø < 25 mm: Ø 25 x 70 mm Shank for drill Ø > 25 mm: Ø 40 x 70 mm Dimensions and weights Width x Length x Height MF 1500 BB: 5,900 x 7,600 x 3,850 mm Total weight: 42,000 kg Oil tank capacity: 600 – 1,200 liters WORK SLIDE TILTING Minimum / maximum vertical inclination – A axis: +20° / -20° Continuous controlled radial resolution: 0.001° MILLING HEAD – ISO 50 spindle connection Max horizontal working stroke – Z + W axes: 1,000 mm Column longitudinal travel – X axis: 3,250 mm Drilling slide vertical travel – Y axis: 1,500 mm Spindle rotation speed, adjustable max: 2,500 rpm Spindle power (S1 duty): 17 kW Maximum spindle torque: 680 Nm ROTO-TRANSLATING CLAMPING TABLE Max clamping surface: 2,000 x 2,000 mm Max horizontal travel – U axis: 1,000 mm Continuous controlled radial resolution: 0.001° Max rotating workpiece load: 35,000 kg Standard T-slot size: 22 mm Machine complete with: Itsdpfeyymdisx Acrsh • Remote electronic handwheel • ISO 50 tool changer magazine with 10 positions • Many tools and working equipment • Rack with various drills • User manual, maintenance manual, and CE conformity declaration

Year of construction: 2012, condition: excellent (used), Machine equipment with 2 working fields. 2 workpieces can be inserted independently of each other. Workpiece dimensions Isdpfomrqrijx Acrjth - length 110 - 800 mm - width 20 - 1700 mm - height 14 - 60 mm - Working height 900 mm Machine structure - 1 x horizontal drilling station 0,9 kW. Drill speed 7.200 rpm - drilling depth max. 30 mm - Drill depth 10 mm - total drill length 85 mm - 2 x glue application and dowel insertion station - 2 x dowels, dowel projection 15-20 mm - dowel center distance 96 mm - 2 x oscillating conveyor dowel - 1 x glue pump 18:1 - 2 x electronic glue control ELC - workpiece support table 1700 mm - 8 x workpiece clamping cylinders - Center stop for 4 working fields - Central lubrication with hand pump for grease lubrication - NC positioning of the height adjustment of the drilling and doweling station (Z-axis) - axis with position control, travel speed 12 m/min KOCH Numeric positioning control with 1 NC axis (X)

Condition: used, Year of construction: 1992, Number of spindles per row of holes: 16 Number of horizontal spindles: 5 Cup hinge drilling head: yes Drill pitch: 32 mm Hold-down device: yes / pneumatic Iedpfowv Nb Njx Acreth Power consumption: 2.2 kW Drilling unit: swivelling

Condition: new, Year of construction: 2025, Spindle speed: 4460min-¹ Min. workpiece dimension X: 300mm Min. workpiece dimension Y: 90mm Isdpfx Acel D Rw Nersth Min. workpiece dimension Z: 10mm Max. Travel speed X axis: 20m/min Max. tool diameter: 35mm Max. Workpiece dimension X: 3000mm Max. Workpiece dimension Y: 900mm Max. Workpiece dimension Z: 50mm Grooving saw speed: 5700min-¹ Dimensions: 3704mm x 1455mm x 2209mm (L x W x H) Nominal width of external suction nozzle: 120mm Power drive motor: 2,2kW Weight: 1200kg

Condition: used, Year of construction: 1989, with many drills used, top condition Machine cleaned, partially overhauled, lubricated, made operational, test run performed. Make: Hoffmann Type: DB 23 Year of manufacture: 1989 Machine no.: 169 Number of spindles: 23 units Number of boring beams: 1 Spindle pitch / grid: 32 mm Drilling from below, stroke: 60 mm Stop rulers with central adjustment Working width: 704 mm (1080 mm with portal clearance) Drilling depth: 70 mm horizontal Drill holder: M 10 / Taper 30° Space requirement approx. 1300 mm x 1000 mm x 1300 mm Iedpfx Acevyurcsroth Weight: approx. 500 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 510501 U, workpiece weight (max.): 25 kg, saw blade diameter: 100 mm, workpiece height (max.): 50 mm, drilling depth: 45 mm, saw blade speed: 7,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Drilling and Milling Unit Number of independent vertical spindles: 8 Number of horizontal spindles on X-axis: 4 Number of horizontal spindles on Y-axis: 2 Saw blade unit – diameter: 100 mm Milling head: 3.6 kW, ISO 30 – 12,000/24,000 rpm Spindle speed: 3,600 rpm Saw blade speed: 7,000 rpm Maximum horizontal drilling depth (X and Y axis): 30 mm Maximum vertical drilling depth: 45 mm Maximum horizontal tool diameter: 12 mm Maximum vertical tool diameter: 35 mm Number of controlled axes: 3 Motor power: 1.5 kW Workpiece Maximum panel thickness: 50 mm Maximum panel weight: 25 kg Maximum panel size: X 1,100 mm, Y 50 mm Minimum panel size: X 270 mm, Y 150 mm, Z 12 mm Panel feed speed: 25 m/min Control System Control: Fully parametric Iodew Dzm Tepfx Acroth MACHINE DETAILS Electrical Data Rated voltage: 400 V Frequency: 50 Hz Rated current: 21.1 A Max. surge current: 0.018 kA Total power: 6.4 kW Compressed Air and Extraction Air pressure: 7 bar Extraction diameter: 140 mm Exhaust air volume: 2,000 m³/h – 30 m/s Maximum air consumption: 60 Nlt./min Dimensions & Weight Dimensions: 2,520 x 1,600 x 1,680 mm Weight: 900 kg

Year of construction: 1980, condition: ready for operation (used), Ayen Type DB 1000 K 23 Year of manufacture 1980 Itsdepgkqpspfx Acreh GS-tested number of spindles 23 pieces number of drilling beams 1 spindle distance / grid 32 mm drilling from above swiveling pneumatic Hole line drilling device

Condition: excellent (used), Year of construction: 2000, Table clamping surface: 600 x 300 mm Travel range: X 350 Y 250 mm Ijdpfew Hyfyox Acroth Adjustment range W-axis (motorized): 200 mm Servo-controlled EDM axis Z: 340 mm Drilling with electrodes from Ø 0.2 to 4 mm Max. workpiece weight: 300 kg Connected load: 3.5 kVA Machine weight: 700 kg

Condition: excellent (used), drilling depth: 10,000 mm, MGA (Romanian) Deep Hole Boring Machine Max Boring Dia: 187mm Max Boring Length: 10,000mm Chuck Diameter: 813mm Chuck Bore: 152mm Machine had a complete retrofit in 2007 to enable CNC or manual mode operation Ijdpeyk Tcfsfx Acreth Controls: Bosh Rexroth Electric Drives Software Winstudio At the moment the machine is set to bore 3000mm length Has 5 other bed sections to increase this 12 Various Boring Tubes 30 Various Boring Heads 5 Supporting Steadies 2 Pressure Heads

Condition: excellent (used), functionality: fully functional, drilling depth: 1,000 mm, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, travel distance Z-axis: 360 mm, spindle speed (max.): 4,200 rpm, drill diameter: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, spindle motor power: 10,000 W, table length: 700 mm, table width: 1,400 mm, table load: 4,000 kg, feed length W-axis: 500 mm, Selca S4040D CNC Control Itodpfx Aexpwf Tocreh Drilling depth, transverse movement V axis: 1,000 mm Column, longitudinal movement X axis: 1,650 mm Drilling slide, vertical movement Y axis: 1,000 mm Drilling slide, workpiece support movement W axis: 500 mm Drilling slide, maximum vertical "swivel" - A axis: +20° / –20° Rapid traverse, adjustable speed up to 10,000 mm/min Drilling diameter in solid material min/max: 5 – 40 mm Drilling spindle, rotational speed, adjustable: 1 – 4,200 rpm Drilling spindle motor power: 10 kW Fixed clamping table, dimensions: 700 x 1,400 mm Standard clamping slots: 18 mm Hydraulic pump motor power: 7.5 kW Gun drill holder; shank for drills > 6 mm: 10 x 40 mm Gun drill holder; shank for drills < 6 mm: 25 x 70 mm Clamping table ROTARY & "BARRASENO" axis B Dimensions mm: 800 x 1,000 Standard clamping slots: 18 mm Maximum axial load (rotary): 4,000 kg Continuous rotary axis B resolution: 360,000 steps/rev Maximum vertical resolution "BARRASENO" axis B1: +20° / –20° Small milling head – threading, etc. Maximum horizontal working stroke Z axis (830): 360 mm Spindle speed, adjustable up to 2,200 rpm Threading spindle motor power: 10 kW ISO40 tool changer with 10 rotary-translating stations USED MACHINE

Condition: good (used), Biesse B/5 pass-through drilling machine composed of: No. 2 Units with 22 lower vertical drilling spindles No. 1 Unit with 22 horizontal drilling spindles No. 4 Upper vertical pressers Itedpevu Rpgofx Acroh Installed power kw 7.5 Air pressure 7 bar

Condition: as good as new (ex-display), Year of construction: 2021, The machining center PROJECT TF 600 S was developed for efficient cabinet (carcass) production. Technical Specifications: Axes: X-Axis: - Max. workpiece length: 2,800 mm - Min. workpiece length: 200 mm - Travel speed: 130 m/min Y-Axis: - Max. workpiece width: 1,200 mm - Min. workpiece width: 50 mm - Travel speed: 75 m/min Z-Axis: - Max. workpiece thickness: 60 mm - Min. workpiece thickness: 8 mm - Travel speed: 30 m/min Units for 6-sided machining: 1. Top drilling head: - Vertical spindles in X-direction: 7 pcs - Vertical spindles in Y-direction: 5 pcs - Horizontal twin drilling spindles in X-direction: 2+2 pcs - Horizontal twin drilling spindles in Y-direction: 1+1 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm - Motor: 2.2 kW 2. Top drilling head: - Vertical spindles in X-direction: 7 pcs - Vertical spindles in Y-direction: 5 pcs - Horizontal twin drilling spindles in X-direction: 2+2 pcs - Horizontal twin drilling spindles in Y-direction: 1+1 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm - Motor: 2.2 kW 3. Top grooving saw in X-direction: - Speed: 3,400 rpm - Max. saw blade diameter: 120 mm - Groove position: between 55 and 800 mm Itedpfx Aow Ugpyscroh 4. Top routing unit: - For milling and grooving - Motor: 3.5 kW - Collet: ER 25 - Max. tool diameter: 16 mm 5. Bottom routing unit: - For milling and grooving - Motor: 3.5 kW - Collet: ER 25 - Max. tool diameter: 16 mm 6. Bottom drilling head: - Vertical spindles in X-direction: 3 x 3 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm Control via Windows PC Software: MASTERWORK MACHINE VERSION Mobile control console with color screen, keyboard, and mouse Wireless barcode reader Additional features: - Intelligent, patented worktable: The worktable moves automatically up and down, as well as left and right for optimal support of all drilling and milling operations. Through-feed drilling and milling is also possible. - Controlled workpiece clamping device - Energy-efficient air flotation tables using an integrated fan (instead of external compressed air) - Rack and pinion drive on X and Y axes with linear guides - Ball screw drive on Z-axis with linear guides - CE safety features: light barriers and fencing, as well as 2 pressure stages for the clamping jaws - Automatic central lubrication system Further data: Dimensions: 5,280 x 2,480 x 2,190 mm (LxWxH) Extraction connections: 2 x 200 mm, 1 x 100 mm Required air pressure: 8 bar

Year of construction: 2002, condition: ready for operation (used), Travel X/Y/Z: 3000mm/2300mm/1600mm, travel W: 700mm, max. table-to-spindle distance: 2300mm, table dimensions X/Y: 1800mm/2200mm, max. table load: 10000kg, spindle diameter: 130mm, spindle speed: 2500rpm, rapid traverse X/Y/Z: 10m/min, rapid traverse W/B: 5000mm/min/500mm/min, feed X/Y/Z: 4m/min, tool holder: BT50, tool positions: 38, positioning accuracy X/Y/Z: +/-0.008mm, positioning accuracy W: +/-0.012mm, repeatability X/Y/Z: +/-0.004mm, repeatability W: +/-0.008mm. Machine dimensions X/Y/Z: approx. 7050mm/7200mm/4800mm, weight: approx. 37000kg, control: TOSNUC-888. Documentation available. An on-site inspection is possible. The machine is located in China. Itjdoxf Ikrepfx Acroh

Year of construction: 1994, condition: ready for operation (used), A CNC universal tool milling and drilling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4400mm/4250mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 425. Documentation available. An on-site inspection is possible. Ijdpfx Aew D Evljcroth

Year of construction: 2007, condition: ready for operation (used), A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible. Ijdpfx Acexp Rb Ijreth

Condition: ready for operation (used), Drilling capacity (steel): 100mm, max. pitch circle diameter: 7000mm, spindles: 2, spindle speed: 3000rpm, spindle mount: ISO 50, drill carriage stroke: 900mm, feed: 6m/min, power: 125kW. Machine dimensions X/Y/Z: approx. 13000mm/11000mm/5100mm, weight: approx. 18000kg. On-site inspection is possible. Isdpsvriq Rjfx Acrjth

Condition: ready for operation (used), Year of construction: 2000, Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts. Iedpfx Acox Tpytoroth

Condition: new, Year of construction: 2026, CNC bore and hinge insertion machine with magazine feeding for the automatic processing of hinges and hinge mounting plates. Robustness, durability and ease of use distinguish our automatic CNC controlled drilling and insertion machines. Itsdpfodx A U Hsx Acrjh Short introduction: • CNC controlled hinge boring and inserter for high capacity • Flexibility through the CNC control • Massive and robust drilling units • Inserting die made of steel for a long life time use • Solid wood drilling with standard 1,5 kW motor • Safety-control with metal-detector (option)