Used Cnc Double Column for sale (23,189)

Year of construction: 1978, condition: used, pressure 40 t distance between columns 600 mm stroke 150 mm table surface area 600x410 mm ram surface 220x130 mm table height 850 mm Bljdoq Rhkwepfx Aqrop weight of the machine ca. 2,5 t

Condition: good (used), Year of construction: 2007, CNC traveling column milling machine Manufacturer: KEKEISEN Machine model: UFF 4000/16 Control system: Heidenhain iTNC 530 Year of manufacture: 2007 TECHNICAL DATA X-axis travel: 4000 mm Y-axis travel: 1400 mm Z-axis travel (vertical): 1600 mm Table area: 4200 x 1500 mm Table load: 10 t Spindle speeds (gear stages): 20 – 7000 rpm Spindle drive: 30 kW Rapid traverse: 18 m/min Machine weight approx.: 24.0 t + table EQUIPMENT FEATURES + CNC control system HEIDENHAIN iTNC 530 with fast MC424 + X-axis with hydrostatic guidance + B-axis with stepless swivel function + Air, water supply through the spindle and spray ring + Edge gap filter for water purification + Additional tank and pump for deep hole drilling at 80 bar + Minimal lubrication system + Chip conveyor with water pump and water tank + Cooling unit for hydrostatic guidance + Cooling unit for spindle and gearbox cooling + NC dividing head WALTER TABIH Evolution 320 EG, year of manufacture 11/2014, with horizontal table axis and tailstock MK6, center height 320 mm, max. Bsdpfxez Ear Se Aqrelp Subject to changes and errors in the technical data and specifications.

Condition: as good as new (ex-display), Year of construction: 2017, machine/vehicle number: DF0052, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Bljdpfsfxyirsx Aqrop Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 395 mm Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Blodpjzrpt Iefx Aqrep Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m year of manufacture 1974 overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Blodpszrpt Usfx Aqrsp Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: excellent (used), Year of construction: 2001, Manufacturer: ROVETTA Model: S4-1500 Link Drive Year: 2001 Condition: Used Stock number: 0391 Manufacturer: Rovetta Number of strokes: 4 Ram force: 1500 tons Ram stroke: 763 mm Ram adjustment: 400 mm Daylight (bottom dead center, ram up): 1,200 mm Distance between front uprights: 5,700 mm Die bed dimensions: 5,500 x 2,500 mm Ram dimensions: 5,500 x 2,500 mm Moving table height: 600 mm Side window size: 3,400 x 1,900 mm Main motor power: 319 kW Bedpfxsyq Tdie Aqrolp Blankholder (total force): 150 tons Blankholder stroke: 250 mm Blankholder working area: 2,000 x 1,200 mm Strokes per minute: 8-24

Condition: good (used), Year of construction: 1990, 1 used, well-maintained CNC tool milling machine, traveling column design, with CNC path control GRUNDIG Dialog 11 Table size 1600 x 675 mm Tool holder SK / ISO 40 Travel distances X-axis, longitudinal 1200 mm Y-axis, transverse 600 mm Z-axis, vertical 500 mm Table load 2000 kg Spindle speed range 20 – 6300 rpm Bledjhhuf Hspfx Aqrep Feed rate range, stepless 2 – 10,000 mm/min Rapid traverse in all axes 10 m/min Quill stroke 80 mm Drive power 100% ED 7.5 kW 40% ED 12 kW Machine dimensions L x W x H 3600 x 3000 x 2300 mm Machine weight 6800 kg Control cabinet dimensions L x W x H 1700 x 900 x 1750 mm Control cabinet weight 470 kg Accessories / Special features: • CNC tool milling machine suitable for tool and fixture manufacturing, training, and mold making • CNC path control GRUNDIG Dialog 11 • Screen graphics, dialog-guided input, 3D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input graphically supported, milling cycles "contour pocket" for automatic free milling of irregular pockets, even with islands, shifting and rotation of the coordinate system • Electronic handwheel • RS 232 interface • Swiveling vertical milling head +/- 90° • Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system • Quill adjustment 80 mm • Horizontal milling attachment • Full protection enclosure • Ball screw spindles in all 3 axes • Coolant system • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2017, machine/vehicle number: H 28 16 0401, KP13 Üretim Markası: ALES PRES H TİPİ EKZANTRİK PRES Makinenin Üretim Yılı: 2017 Kapasite : 500 TON Hava Tüketimi (m3/saat) : 30 Güç (KW) : 75 Kapladığı Alan (m2) : 108,16 Lokasyon: KOCAELİ/ÇAYIROVA Üst Tabla Ebatları : 377 cm x 160 cm Bsdpfx Aqezxq Tcjrjlp Alt Tabla Ebatları : 350 cm x 160 cm Pres Yükseklik : 6,5 m Pres En : 5,2 m Pres Genişlik: 3,2 m Dakikadaki Vuruş Sayısı : 70 spm Sac sürücü, Sac açıcı ve Sac doğrultucu Markası : Coiltech used

Condition: used, Year of construction: 2004, x-travel 3000 mm y-travel 3400 mm z-travel 950 mm surface area 2500x1600 mm no. of tables 2 control NUM Tool changer 12 Pos turning speeds 4,5-40.000 U/min spindle taper: HSK 40 spindle drive 6 kW Table load 850 kg Machine No.: 2259 B +/- 110° C 360° Table size: 6000 mm x 2500 mm (hole pattern 22H7 / M16) Spindle: Manufacturer Fischer, 2 pieces (type MFWS 1709/30 Serial number: 10015020 / 133227) Milling head: Forest Line type: fork head / B-axis +/- 110° swivel / C-axis 360° (infinite) rotation / Station for milling head storage (2 pieces) Chip conveyor: Scraper conveyor / Manufacturer: Richter Tool measurement: Blum Feed: X + Y 30,000 m/min / Z 28,000 m/min Rapid traverse: equals feed rate The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Bljdpfx Aqeyqv Eiorop More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Technical details: faceplate diameter: 4000 mm swing diameter: 4300 mm turning height: 330 mm faceplate turning speed range: 1 - 92 U/min Bljdpsvb Dq Rjfx Aqrsp workpiece weight: 18 t feeds: 1 - 4000 mm/min main drive motor: 55 kW total power requirement: 85 kVA weight of the machine ca.: 64 t dimensions of the machine ca.: 90, x 7,2 x 5,5 m with CNC SIEMENS 840 D for 4 axis 2 Vertical Supports tool Basic holder chip conveyor *

Condition: used, Year of construction: 1987, pressure 800 t stroke 100 mm no. of strokes 45 /min distance between columns 600 mm table surface area 560 x 650 mm capacity of ejector 5 t ejector stroke 15 mm Bledpfxszl E Sao Aqrep ram surface 590 x 450 mm power requirement 22,0 kW Weight 17,0 t dimensions (WxDxH) 1,7 x 2,55 x 3,1 m Nominal force travel 1,46 mm With knuckle-joint drive, flywheel brake, hydraulic clutch with 2nd brake, press frame balancing, single ejector in table, self-monitoring control

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,000 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 18,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 38 Nm, overall weight: 65,000 kg, Initial commissioning: 2012 Control system: Heidenhain iTNC 530 X-axis: approx. 7,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 2,000 mm A-axis: ± 100° C-axis: ± 360° Clamping table: 6,000 x 3,000 x 160 mm (sunken) with 18H12 T-slots / 250 mm spacing 2-axis milling head VH 12 Spindle power: 24 kW Spindle speed: max. 18,000 rpm Torque: max. 38 Nm Tool holder: HSK 63A Linear axis drives Feed rate X, Y, Z axes: up to 50 m/min / 30 m/min Axis acceleration X, Y, Z axes: up to 2.5 m/s² Connection data Voltage: 400 V Bedpfjyrdc Eox Aqrolp Frequency: 50 Hz Main fuse: 200 A Power consumption: 85 kVA Dimensions, weights Machine footprint without peripherals: approx. 10,000 x 6,650 x 5,900 mm Total weight: approx. 65,000 kg Additional equipment - Double-sided access doors - 10-position tool changer Optional at extra cost: - Wireless probe - Heidenhain remote diagnostics Machine condition Fully functional, very good condition. Can be inspected under power. !!! The machine was completely mechanically overhauled in 2022 !!!

Condition: ready for operation (used), Year of construction: 1996, Travel X/Y/Z: 740mm/500mm/480mm, tool holder: SK40, tool positions: 22, max. spindle speed: 4700rpm, control: Heidenhain TNC 426 PA. Machine dimensions: approx. 3000mm/2400mm/2700mm, weight: approx. 5000kg. The machine was used exclusively for machining plastic and operated without metalworking fluid. The coolant system must be repaired. The backup battery of the control is depleted and must be replaced. Inspection possible by arrangement. Blodpszukt Usfx Aqrop

Condition: excellent (used), Year of construction: 2006, I sell the double side throughfeed CNC working centre Biesse Skipper 100 Year 2006. Very productive and fast. Automatic infeed table. Working length 90-3000mm Working width 70-1000mm Working height 8-60mm Bsdpshlhigjfx Aqrjlp Configuration per side: Milling head 3,5 kW, 7000-18000 rpm 29+8+2 Drilling heads 1 Grooving saw D.150mm X-direction Software BiesseWorks. CD included. Condition very good ! Fully working. Automatic system of central lubrication and dust collection connections. Complete with safety barriers, Transport elements and CE-points. CE-certyficate and full documents included. Repairs required: 1 safety carpet

Year of construction: 1986, condition: used, pressure 015 t dayligth - mm strokes per minute 200 - 2000 table surface area - mm Bodpfofn Apxox Aqrjlp ram surface 490 x 200 mm sheet width 5 - 50 mm adjustment of stroke 10-30 mm weight 3 t dimensions 1370 x 1200 x 2200 mm Drive 10 kW hole in the table 350 x 100 mm table width 530 / 210 mm table length 530 / 350 mm

Condition: good (used), Year of construction: 1977, Druck 250 t Staenderweite 1120 mm Hub 250 mm Entfernung Tisch/Stoessel, gr. Hub oben, Verst. oben 500 mm Bodsx Ug Depfx Aqrslp Tischflaeche 1100 x 900 mm Tischhoehe ueber Flur 950 mm seitlicher Staenderdurchgang 700 mm Stoesselflaeche 1100 x 900 mm Geschwindigkeit ab mm/s Geschwindigkeit auf mm/s Arbeitsgeschwindigkeit mm/s Ölinhalt 730 l Antriebsleistung 56 kW Gewicht 25 t Raumbedarf (BxTxH) 2,3 x 1,55 x 3,96 m Zusatzinformationen u mit oelhydr. Antrieb, hydr. (§20) und elektr. Steuerung nach UVV, Lichtschranke (Sick), obere und untere Hubbegrenzung, druck- und wegabhaengig steuerbar, Schnittschlagdaempfung, Kurzhubsteuerung, neue Steuerung (Mitsubishi), Sicherheitssteuerung (PNOZ Multi), Bildschirmsteuerung mit Touch-Screen, Schaltschrank

Condition: good (used), Year of construction: 2005, x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm control SIEMENS 840D table load 12 t height over floor 6300 mm Bodpfx Ajvwglvoqrelp table dimension - longitudinal 5000 mm table dimension - cross 2500 mm no. of tables 2 tool change unit 200 -fach weight of tools max. 30 kg tool taper HSK A 100 diameter of tools max. 250 mm workpiece length 500 mm spindle turning speed range 5-6000 U/min c-axis -10 bis 370 ° b-axis 5 bis -95 ° column daylight 3000 mm distance spindle nose and table 1500 mm weight of the machine ca. 161 t dimensions of the machine ca. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec portal milling machine is in very, very good condition and can be beautiful condition and can be inspected by arrangement with the seller.

Condition: used, Year of construction: 1991, pressure 400 t stroke 300 mm table surface area 1200 x 700 mm ram surface 1200 x 700 mm dayligth 500 mm adjustment of stroke 300 mm return capacity 348 kN capacity of ejector 100 kN ejector stroke 100 mm control SIEMENS Simatic S 5 total power requirement 65 kW weight of the machine ca. 28 t dimensions of machine L x W x H 4,4 x 2,75 x 4,0 m = hydr. punching and embossing press Accessories: tool changing table Bljdetqqlcjpfx Aqrop - with cutting shock absorption damping force 4000 kN damping stroke 5 mm spindle adjustment 200 m

Condition: used, Year of construction: 2007, pressure 100 t stroke 500 mm table surface area 900 x 600 mm Blodpjvprv Rofx Aqrep rapid traverse 22 mm/s stroke speed 2 mm/s ram surface 700 x 350 mm total power requirement 2,2 kW weight of the machine ca. 1,6 t dimensions of the machine ca. 1,9 x 0,85 x 2,3 m The machine is of the Italian make SICMI, which was traded by the Knuth company.

Condition: used, Year of construction: 1989, Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Bsdpfxeuqdi Ue Aqrolp Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton Standard configuration with hydraulic tool clamps on the ram

Condition: used, Year of construction: 2004, Technical details: faceplate diameter: 4770 mm swing diameter: 7000 mm turning height: 1000 mm slide stroke: 1000 mm workpiece weight max.: 100000 kg faceplate turning speed range: 2 - 20 U/min feed speeds: 1 - 10000 mm/min rapid traverse: 10 m/min ram head dimension: 250 x 250 mm Bsdsvb Hlwspfx Aqrslp main drive: 100 kW total power requirement: 200 kW with CNC SIEMENS 840 D 2 Vertical Supports with toolchanger 12 pockets C-axis and driven tooling SK 50 37 Kw 3000 rpm Chip conveyor and coolant attachment *

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 8880, functionality: fully functional, power: 75 kW (101.97 HP), pressing force: 400 t, stroke length: 400 mm, table width: 1,700 mm, table length: 2,750 mm, distance table to ram: 1,130 mm, total length: 4,500 mm, total width: 3,300 mm, total height: 6,900 mm, overall weight: 82,000 kg, Equipment: documentation/manual, 1 LVD Mac Kay press brake, type SE2 400, table width 2750 mm, 400-ton capacity, available for immediate sale and can be viewed at our Peschadoires facility in central France. The press brake was manufactured in 1980 and completely rebuilt in 2001. It is in excellent condition, as shown in the attached technical specifications and photos. Operating manual and technical documentation are available with this machine. Price upon request. Blodj Ahrh Aopfx Aqrep

Condition: used, Double-column hydraulic press, NEFF type RHS 125 Z Hydraulic drawing press Machine no. 3973, year of manufacture 1983 Pressing force 125 tons Column width 1050 mm Column opening, side 550 mm Table area 1000 x 800 mm Ram area 1000 x 800 mm Ram stroke 350 mm Installation height max. 750 mm Table height above floor 960 mm Drawing cushion force approx. 12 tons at 105 bar Drawing cushion stroke 100 mm Through-hole in the table Ø 202 mm Rapid traverse speed, downward approx. 360 mm/sec Rapid traverse speed, upward approx. 360 mm/sec Working speed approx. 36 mm/sec Bjdpfxoguvtlo Aqrelp Oil tank capacity approx. 1000 liters Motor power, main pump 22 kW Motor power, control pump 4 kW Motor power, control pump 2.2 kW Power connection 400 volts, 50 Hz - Hydraulic drawing cushion under the table with a hole through the table plate Ø 202 mm - Precise 4-way column guidance on the ram corners - Stepless pressing force adjustment - Adjustable fixed stop, electrically controlled via a hydraulic motor - Stroke damping - 2-hand control panel for releasing the lifting motion on the press - Control cabinet positioned next to the press (1600 x 500 mm) - Documentation including operating manual, electrical wiring diagram, and PLC program printout available Space required for the press L x W x H 2600 x 2400 x 4270 mm Weight approx. 14 tons Good condition

Condition: used, pressure 100 t distance between columns 310 mm no. of strokes 80 Hub/min ram - range of adjustment 40 mm table surface area 400x300 mm ram surface 250x190 mm table height 960 mm tool hole in ram Ø 35 mm weight of the machine ca. 1,5 t Bsdpfelp U Sdex Aqrslp dimensions of the machine ca. BxTxH 1500x1500x2200 m

Condition: good (used), BACCI DOUBLE JET The BACCI DOUBLE JET machine with a KUKA robot is an advanced, automated CNC machining center dedicated to the production of wood and wood-based components. The KUKA robot works with the machine's integrated feeder to automatically feed material for processing, significantly increasing efficiency and minimizing the need for manual operation. After the milling and grinding process is complete, the robot automatically retrieves finished parts and places them on pallets, streamlining production logistics and enabling continuous operation without interruptions for manual reloading. This system ensures seamless integration of the robot with the BACCI DOUBLE JET machine, which features dual machining heads and 12 interpolated axes, enabling simultaneous and precise machining of components. Automated material loading and unloading and the integrated feeder system increase efficiency and production repeatability while reducing labor costs and improving operator safety. This machine is primarily used in the furniture and carpentry industries, where high standards of quality and efficiency are required. Bjdjxr Dcwopfx Aqrslp