Used Cnc Horizontal Lathe for sale (16,117)

Condition: excellent (used), Year of construction: 2012, CNC lathe 2 axes DMC Korea DL22 Fanuc OiTD with Manual Guide and USB port year of manufacture 2012 8-inch chuck Csdpsxyaulefx Afpspu Spindle bore 65mm Turning length 400mm 12-position tool turret Tailstock Coolant tank with pump

Condition: good (used), CNC Lathe with y-axis Geminis Goratu - GHT-4 G4-800 Max. turning Ø:800mm Length: 7000mm Width: 2500mm Height: 2500mm Codpfx Aeygv Eusfpjpu Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2003, Technical data: Swing diameter: 680 mm Distance between centers: 1000 mm Speed: 2800 rpm Chuck: ø300 mm Dimensions, approx.: 5560 x 2400 x 2130 mm Weight, approx.: 10,000 kg Equipment: - Control: Heidenhain CNC Pilot 4290 Cedpfx Aeyfnqgsfpjpu - 12-position turret VDM 40 - C-axis

Condition: used, turning diameter over bed 310 mm turning dia. over slide 160 mm control BOSCH CNC ALPHA 2 centre distance 340 mm centre height 148 mm Cpodpfxjw Sx Ucs Afpeu spindle tunring speed 3.000 U/min x-axis 220 mm z-axis 400 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2013, Technical details: turning diameter over bed: 284 mm turning length: 406 mm x-axis: 218 mm longitudinal traverse (z-axis): 406 mm control: Siemens 828D revolution per minute: 5000 U/min spindle bore: 62 mm max. torque on the spindle: 125 Nm rapid motion - x-axis: 30 m/min rapid traverse Z-axis: 30 m/min tool turret - number of stations: 12 Stationen / Stations Weight approx.: 2,8 t dimension machine xH: 3,10 x 1,40 x 2,29 m dimension L-W-H: Späneförderer: 3400 x 1150 x 2180 mm Cpsdpsydddtofx Afpeu

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Cpodpfxjwz Rifo Afpeu Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: used, Year of construction: 2008, turning diameter: 275 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,345 mm, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, Equipment: documentation/manual, CNC Lathe with Y-axis, driven tools an 2nd spindle CNC Control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 / 366 mm Spindle bore diameter 80 mm Spindle speed 4000 R/min Spindle motor 18.5/15 Kw Movement X-axis 260 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1345 mm Movement W-axis (subspindle to mainspindle) 1275 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper BMT Cjdpfx Ajygw Hmsfpspu Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 6000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: as good as new (ex-display), The Numturn 500/1500 FA is a precision CNC Flat Bed Lathe designed for a wide range of applications, making it an excellent choice for the CNC Flat Bed Lathes category. With a robust construction featuring heavy ribbing of the machine frame and wide hardened V-guides, this lathe is engineered for heavy-duty machining. The Fagor 8055i control enhances your workshop programming experience, while the automatic 8-station servo-driven tool turret significantly increases productivity and flexibility for both single part and small batch production of larger workpieces. Its hydraulic power chuck offers adjustable holding force, and the heavy-duty tailstock provides high clamping force for secure machining. The completely lockable enclosure and smart central lubrication system contribute to a low-maintenance operation, allowing for more efficient workflows. KNUTH leads the way in reliability and performance, so if you're looking for a CNC Flat Bed Lathe that delivers robust construction and precise functionalities, you can request a quote today. Cedpfem E Ty Nox Afpopu

Condition: new, Year of construction: 2026, operating hours: 100 h, machine/vehicle number: BMWF241003, Professional Rebuild and Retrofit of Heavy CNC Lathes: Niles, Weiler, Gildemeister, TOS, TURMN We specialize in restoring full operational capability and performing digital modernization of heavy machine tools that form the foundation of rigid and efficient production. We combine the legendary durability of heavy cast iron with state-of-the-art Industry 4.0 control systems. Why choose our retrofitted machine? Performance of a New Unit at 50% of the Price: We offer machines with the performance and accuracy of new machining centers at a fraction of the cost of a new investment. Unrivaled Rigidity: We rely on proven machine bases from brands such as Niles DFS 4 (slant bed, 17 t weight) or TOS SUA (load capacity up to 8 tons), which outperform modern, lighter designs in terms of vibration damping. Modern CNC Heart: We install the latest systems (Siemens Sinumerik ONE / 840D sl / 828D), ensuring full availability of spare parts, remote diagnostics, and ease of programming. ​ ​ Warranty and Support: Every machine after complete mechanical overhaul (DIN 8605 accuracy class) and electronic retrofit is covered by a 12‑month warranty. Our specializations: Codpfov R Dlyjx Afpspu Niles DFS 3/4: Comprehensive rebuilds of multi-axis centers (C, Y, B) for the most demanding applications. Weiler E Series: Restoring legendary precision and intuitive cycle operation for premium toolrooms. Gildemeister NEF 710: “Smart Retrofit” of the control system, giving a second life to these reliable German designs. TOS SUA 80/100: Complete overhauls for the heaviest shaft and large-part machining. TURMN 630/800/1100: General overhauls and “Smart Retrofit” CNC control upgrades. Our offer goes beyond selling ready-made machines. We provide full flexibility and consulting throughout the investment process: Purchase on Request: At the customer’s request, we search for the optimal machine base on European markets (e.g. Germany, Italy, Poland). We use our experience in evaluating “dead CNC” machines to buy units at a price close to mechanical scrap value, while preserving their full potential for rebuild. Evaluation and Pricing of Market Machines: If the customer finds a machine independently, we offer a professional mechanical inspection (bed geometry, spindle play) and preparation of a detailed cost estimate for overhaul and retrofit. Overhauls of Customer-Owned Machines: We carry out complete modernization of machines already installed in the customer’s machine park.

Condition: excellent (used), Year of construction: 2019, SMEC SL2500M cnc lathe with C-axis Year: 2019 DESCRIPTION Control Siemens 828D Swing over bed 650 mm Swing over cross slide 480 mm Max. turning diameter 405 mm Max. machining length 497 mm Spindle speed 3500 rpm Spindle nose ASA A2-8 Draw tube ID 77 mm Spindle bore diameter 86 mm Spindle motor (Cont./Max) 15/18.5 kW Travels X-axis travel 245 mm Codpfsygt Dzox Afpjpu Z-axis travel 540 mm X-axis Rapid traverse rate 24 m/min Z-axis Rapid traverse rate 30 m/min Turret number of tool stations 12(24) (BMT65) Turning tool shank size 25 mm Boring bar diameter 50 mm Turret index time(next station swivel time) 0,2 sec Rotary tool speed 5000 rpm Rotary tool motor (Cont./Max) 3.7/5.5 kW Tailstock Quill diameter 110 mm Quill stroke 100 mm Tailstock taper MT5 Machine Size (with Side Chip conveyor) L×W×H 3125(4230) × 1610 × 1937 mm Coolant tank capacity 175 Liter Accessories/options: 2 pieces radial driven tool holder, BMT65 2 pieces axial driven tool holder, BMT65 parts catcher tool measuring arm swarf conveyor coolant tank documentations remote control foot pedals for chuck and tailstock Under power in our warehouse!

Condition: excellent (used), Year of construction: 2006, EMCOturn E45 CNC lathe with C-axis with barfeeder Year: 2006 turning diameter 220 mm turning length 310 mm control Siemens 840D turning diameter over bed 430 mm spindle bore 45 mm spindle tunring speed 6.300 U/min x-travel 160 mm z-travel 310 mm number of tool places 12 Positions C-axis driven tools total power requirement 17 kW Transport dimensions ca. 3,3 x 1,5 x 1,95 m machine weight ca. 3.300 kg Accessories/options: - barfeeder for 1.5 meter bars - C-axis and driven tools - driven tool holders axial and radial - static tool holders - documentations - backup - footpedal - tailstock - parts cather Csdpfx Asygtgpefpopu - collet type chuck with collets - 3-jaw hydraulic chuck - coolant tank

Condition: used, Year of construction: 2006, Technical details: turning diameter: 360 mm turning length: 1000 mm total power requirement: 5,5 kW centre height: 180 mm swing diameter over longit. slide guides: 335 mm max. turning dia. over cross-slide: 198 mm bed width: 250 mm main spindle bore: 42 mm spindle turning speed range: 1-4000 U/min Tailstock diameter: 58 mm Cpodpfjyfg Udsx Afpju Morse taper tailstock: MK 3

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 610 mm, turning length: 2,000 mm, spindle bore: 100 mm, travel distance X-axis: 310 mm, Equipment: documentation/manual, In good condition. Equipped with steadies. Spindle bore 100 mm. Machining diameter up to 610 mm, length up to 2000 mm. Cpsdpox Dhkvefx Afpeu Siemens control. Features TurnPlus. Max. turning diameter: 546 mm Max. turning diameter over bed: 610 mm Distance between centers: 2000 mm CNC type: X-axis: 310 mm Z-axis: 2000 mm Spindle taper: Spindle bore: 106 mm Spindle speed: 1800 rpm Spindle motor power: 15 kW Tailstock: yes Bar feeder: no ----- Length x width x height: 4500.0 × 1620.0 × 1950.0 mm Weight: 4540 kg Technical condition: as is

Condition: new, Year of construction: 2025, 0390 mm 610 mm Cjdpfow In Epox Afpspu 54 mm 330 mm 4000 U/min A1-6 DIN 55026 60 mm 140 mm

Condition: excellent (used), Year of construction: 2013, Working area Chuck diameter 160 mm Weight max. 86* kg Swing diameter 200 mm X-travel (working stroke) 380 mm Z-travel 660 mm Loading time (depending on clamping device) 1 – 2 sec. Main spindle 2 number Spindle flange according to DIN 55026 5 size Spindle bearing – Ø front 80 mm Maximum speed 6000 rpm. Main drive, see description 2 number Feed drive Rapid traverse speed, X 60 m/min. Rapid traverse speed, Z 60 m/min. Feed force in X/Z 3.75 / 7.5 kN Ball screw diameter in X / Z 32 / 40 mm Disc turret, see description Electronic equipment in accordance with VDE 0113 Operating voltage 400 V Control voltage direct current 24 V -alternating current 230 V Cpodpfx Afjvz S Siopou Frequency 50 Hz Connection value Connection power without Lt 36 kW Connection power with Lt 39 kW Rated current 64 A Supply line fuse 80 A Dimensions and weight Depth 2800 mm Depth including chip conveyor 4350 mm Width 1200 mm Width with automation 1600 mm Height 2500 (2800) mm Weight approx. 7000 kg

Condition: excellent (used), Year of construction: 2012, Accessories included. CNC Control: Fanuc-18i-MB Working area X travel: 350 mm Z travel: 1600 mm C travel: 360° Swing diameter over bed: Ø 940 mm Max. standard turning diameter: Ø 366 mm (10-position standard turret) Maximum turning diameter: Ø 550 mm Cpedpov Awlksfx Afpsu Maximum turning length: 1580 mm Spindle speed: 20 - 2000 rpm Chuck size: 15"/18" Spindle nose: A2-11 Spindle bore: Ø 130 mm Dimensions (LxWxH): mm Machine weight: 11,000 kg

Condition: new, Peak height above bed 210 mm Center distance 950 mm Permissible diameter over bed 420 mm Permissible diameter over saddle 160 mm Codpfx Afswqnm Tjpopu Headstock Spindle bore 62 mm Spindle nose ASA 6ʺ Type 2 Motor Power 10.7 kW Spindle bore 62 mm Speed 0 – 3500 rpm Standard accessories - CNC control D. Electron Z32 (Lathe) with liquid crystal display and graphics mounted on swing arm, as well as built-in industrial PC Pentium and floppy disk drive. - Zero-backlash ball screw - Programming system ISO, Dialog, Teach-in - Memory capacity 127 MB - Enclosure as per picture with lamp - Sliding safety door - Mobile chip tray - Electronic handwheels with 3 steps 0.001 / 0.01 / 0.1 mm - Main motor power 10.7 kW - Rapid traverse 25 m/min - Constant cutting speed - Quill socket MK 5 - Quill Ø 80 mm - Automatic coolant system - Automatic central lubrication system - Fixed steady rest with rollers - Traveling steady rest - Chuck flange - Fixed center - Reduction sleeve - Operation and programming manual - Standard speeds 0-3500 rpm

Condition: excellent (used), Control : D.Electron Z 32 Cpsdod Sitkjpfx Afpsu centre height 220 mm Centre distance 1000 mm turning Ø over bed 440 mm turning diameter over slide 245 mm Travel -Z axis 750 mm width of lathe bed 320 mm spindle mounting CL 6" spindle bore 62 mm spindle speeds 0 - 2000 rpm rapid traverse X/Z 7 m/min quill travel by hand 200 mm quill diameter 80 mm quill mounting MK 4

Condition: used, Peak height: 500 mm Tip width: 2000 mm Turning Ø: 1000 mm Cjdpoctlp Sofx Afpopu Turning-Ø over slide: 620 mm spindle nose: CL 11 Motor spindle: 37 kW Spaenefoerderer Speed: 1500 rpm. Spindle bore: 105 mm Weight: approx. 8500 Kg

Condition: good (used), Year of construction: 2003, operating hours: 15,238 h, functionality: fully functional, turning length: 580 mm, turning diameter: 330 mm, Gildemeister CTX310 Lathe In good condition, 2 axes. Year of manufacture: 2003 The machine can be purchased complete with a bar feeder (sold separately – please check other listings). The machine is connected and can be tested in operation. Turning diameter: 210 mm Turning length: 580 mm Control: Siemens Centre height: 190 mm Turning diameter over bed: 330 mm Turning diameter over cross-slide: 260 mm Main spindle speed range max.: 4000 rpm Cpsdpsyg I Tqjfx Afpju Main spindle drive power: 10 / 7.5 kW Max. torque: 115 / 86 Nm Spindle bore: 68.5 mm Usable bar diameter: 51 mm Travel – X: 185 mm Travel – Z: 455 mm Number of tool positions: 12 Tool holder: VDI 30 Tailstock quill stroke: 400 mm Rapid traverse X: 20 / Z: 30 m/min Feed force: 4.5 kN Total power requirement: 21 kW Machine weight: approx. 3.2 tons _ _ _ _ There may be errors in the specification due to different manufacturing years of the machine.

Condition: used, Year of construction: 1999, machine/vehicle number: 117620, input voltage: 400 V, input frequency: 50 Hz, This Knuth flat-bed CNC lathe, including accessories, type: Vector 600, is being auctioned online as part of our industrial auction/machine auction for the closure of Hofer Getriebetechnik – workshop equipment, lifts, tools, machinery, forklifts, office furniture, metal cabinets. Cpjdpfoyc Uw Iex Afpeu

Condition: good (used), Year of construction: 2023, functionality: fully functional, Machine Parameters: Swing diameter over bed: 750 mm Maximum turning length: 4000 mm Swing diameter over cross slide: 560 mm Description: The machine is in good technical condition and can be inspected by prior arrangement. The machine was installed in 07/2023 and has seen very little use. Total operating hours are 3900, of which the spindle has run for 540 hours. Swing diameter over bed: 750 mm MACHINE SPECIFICATIONS: STYLE 750 Model: STYLE 750 Swing diameter over bed: 750 mm Swing diameter over cross slide: 530 mm Distance between centers: 4000 mm Bed width: 450 mm Maximum load between centers: 1800 kg Maximum load with fixed steady rest (type U): 2500 kg Main Spindle: Spindle motor power (S6): 26 kW Maximum spindle speed (number of speed ranges): 2000 rpm (3) Spindle bore: Ø105 mm Spindle nose: A2-11 X and Z Axis: Ball screw diameter X axis: 32 mm Ball screw diameter Z axis: 50 mm Rapid traverse: 8 m/min Feed range: 0.01-2000 mm/min Tailstock: Quill diameter: 125 mm Quill travel: 225 mm Quill taper: MT 6 General: Machine weight: 8150 kg Machine color: Frame RAL 7021, Panels RAL 9006 Machine dimensions: 6.3 x 2.3 x 2.2 m The machine will be supplied with: - Machine lighting: LED - Coolant system - Automatic lubrication - Steel ball screw covers - Full enclosure - Front sliding doors - Electronic handwheel - Constant cutting speed, chip conveyor Including additional equipment: - Automatic tool changer, 8 positions, VDI-50 - Heavy-duty tailstock, desktop PC software version - 26 kW main motor, handwheel, oil separator - Steady rest D50-300mm, steady rest D60-400mm - Coolant pump switch - 3-jaw chuck D315 – Schunk Rota S Plus2.0 - Speed potentiometer - LED lamp, LAN, heavy-duty coolant system with spray gun Swing diameter over cross slide: 530 mm Distance between centers: 4000 mm Bed width: 450 mm Maximum load between centers: 1800 kg Maximum load with fixed steady rest (type U): 2500 kg Main Spindle: Spindle motor power (S6): 26 kW Maximum spindle speed (number of speed ranges): 2000 rpm (3) Spindle bore: Ø105 mm Spindle nose: A2-11 X and Z Axis: Ball screw diameter X axis: 32 mm Ball screw diameter Z axis: 50 mm Rapid traverse: 8 m/min Feed range: 0.01-2000 mm/min Tailstock: Quill diameter: 125 mm Quill travel: 225 mm Quill taper: MT 6 General: Machine weight: 8150 kg Machine color: Frame RAL 7021, Panels RAL 9006 Machine dimensions: 6.3 x 2.3 x 2.2 m The machine will be supplied with: - Machine lighting: LED Codpsyg R Tgofx Afpspu - Coolant system - Automatic lubrication - Steel ball screw covers - Full enclosure - Front sliding doors - Electronic handwheel - Constant cutting speed, chip conveyor Including additional equipment: - Automatic tool changer, 8 positions, VDI-50 - Heavy-duty tailstock, desktop PC software version - 26 kW main motor, handwheel, oil separator - Steady rest D50-300mm, steady rest D60-400mm - Coolant pump switch - 3-jaw chuck D315 – Schunk Rota S Plus2.0 - Speed potentiometer - LED lamp, LAN, heavy-duty coolant system with spray gun

Year of construction: 2014, operating hours: 8,674 h, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE DISTANCE BETWEEN CENTRES: 1750 mm MAX ROTATING DIAMETER: 820 mm MAX TURNING DIAMETER: 730 mm BAR CAPACITY: 115 mm SPINDLE: 1500 rpm; 30 - 37 kW; ASA 2-11 ; 510 mm X-AXIS TRAVEL: 365+25 mm Z-AXIS TRAVEL: 1650 mm GEAR BOX: 4-STEPS RAPID FEEDS X-Z: 15 - 12 m/min TURRET HEAD: 10 POS CONTROL UNIT: FANUC 0i-TD WEIGHT: 12800 Kg OVERALL DIMENSIONS: 6200 x 2500 x 2500 mm ACCESSORIES: ROTATING TAILSTOCK ; Cjdpfeq H Tr Tex Afpepu SWARF CONVEYOR ; ETHERNET PORT ; PCMCIA SERIAL PORT ; RS 232 SERIAL PORT ; USB PORT

Condition: good (used), Year of construction: 2004, functionality: fully functional, For sale is a FAMOT CTX-400S2 CNC lathe, manufactured in 2004. It is a machine from the Gildemeister Group, known for its reliability and precision in turning operations. The machine is in good technical condition and is currently operational, allowing for its immediate integration into production. Technical Data (based on nameplate and your description): ● Manufacturer: FAMOT (A Company of the Gildemeister Group) ● Model: CTX-400S2 ● Year of Manufacture: 2004 ● Serial Number (No.): 0516000232A ● Turning Range: ○ Ø500 mm (maximum swing diameter) ○ Ø290 mm (maximum turning diameter over slides) ○ Turning Length: 450 mm (with tailstock) ● Chuck: Hydraulic ● Electrical Supply: ○ Voltage (U): 400 V ○ Power (kVA): 44 ○ Current (A): 64 ○ Frequency (Hz): 50 ● Manufactured in: Poland Machine Condition: Good, machine is working. Location: Gdańsk, Poland Cpjdpfx Afswp Ukpepou

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, For Sale: Used EMAG VL5i Vertical CNC Lathe (Year of Manufacture 2014) - High Precision and Efficiency We are offering for sale a used EMAG VL5i Vertical CNC Lathe from the year of manufacture 2014. This machine is designed for efficient and precise turning operations. Thanks to its vertical design and integrated automation, this machine is ideal for large-series production of components, ensuring high efficiency and repeatability. Main Features and Capabilities: • Vertical Design: Optimal chip evacuation and easy loading/unloading. • Integrated Automation: Standardly equipped with a closed automation system with a chain conveyor, enabling continuous operation and minimizing operator intervention. • High Precision: Rigid guides and precise servo drives ensure high machining accuracy. • Machining Versatility: The possibility of using live tools extends the machining range to include drilling and milling. Technical Data (EMAG VL5i): Working Area: • Max. chuck diameter: 250 mm • Max. swing diameter: 270 mm • Max. workpiece diameter: 220 mm • Max. workpiece height: 175 mm • X-axis travel: 660 mm • Z-axis travel: 300 mm Standard Closed Automation: • Number of transport arms for workpiece diameter (from...to) and max. workpiece weight: o 16 (80...220 mm) / 10 kg o 22 (30...160 mm) / 8 kg o 37 (30...85 mm) / 4.5 kg • Max. permissible total load: 175 kg • Chain length: 224 inches • Number of chain links: 224 • Chain pitch: 1 inch (25.4 mm) • Loading time: 2-4 s Main Spindle: • Spindle flange according to DIN 55026: Size 6 • Spindle bearing, front diameter: 110 mm • Max. rotational speed: 4500 rpm • AC-asynchronous main motor: o Power at 100/40% ED: 18/27 kW o Torque at 100/40% ED: 200/300 Nm Cpedpfxowqw Umo Afpju o Corner speed: 850 rpm Feed Drive: • Rapid traverse speed in X: 60 m/min • Rapid traverse speed in Z: 30 m/min • Feed force in X and Z: 10 kN • Ball screw diameter X / Z: 40 mm Tool Carrier: • Number of stations: 12 • Cylindrical shank holder according to DIN 69880 • Shank diameter: 40 mm • Max. tool length including holder: 190 mm • Max. swing circle diameter: 760 mm Tool Carrier with Live Tools: • Number of stations: 12 • Cylindrical shank holder according to DIN 69880 • Shank diameter: 40 mm • Max. rotational speed: 6000 rpm • Corner speed: 3000 rpm • Maximum power: 8.5 kW • Max. torque at 10% ED: 40 Nm • Max. torque at 40% ED: 24 Nm • Max. torque at 100% ED: 15 Nm Electrical Equipment: • Operating voltage: 400 V • Control voltage - DC: 24 V • Control voltage - AC: 230 V • Frequency: 50 Hz • Connected load with/without live tools: 36 kW • Main fuse: 80 A • Electrical execution: VDE 0113 Dimensions and Weight: • Length: 3120 mm • Length including chip conveyor: 4185 mm • Width: 2266 mm • Height: approx. 3200 mm • Machine weight: approx. 7500 kg