Used Cnc press brake for sale (35,095)

TRUMPF TrumaBend V 85

€22,000

Press brake CNC bending press Beyeler 100t 4100mm

Call

Condition: used, Year of construction: 1999, CNC press brake TRUMPF type TrumaBend V 85 Machine No.: F1012F Make No.: 883389 Year of construction 1999 CNC control DELEM DA65 pressure capacity 85 ton. working length 2050 mm stroke 365 mm installation height 535 mm inclination of the pressure beam +/- 10 mm column passage 1750 mm offshore distance 410 mm table width 120 mm Working height with lower tool 1050 mm Max. stop range in X: 860 mm X-axis travel: 600 mm R-axis travel: 250 mm Z-axis travel: 1370 mm Y rapid traverse 200 mm/s Y-operation 1-11 mm/s Y-retract 135 mm/s Hydr. operating pressure 340 bar Oil filling approx. 200 liters Engine power 7,5 kW Mains connection 400 Volt, 50 Hz connected load 14 KVA - pneumatic lower tool displacement - swivelling control panel with CNC 2D-graphic control DELEM DA 65 with 12" CRT screen Djober - RS232 interface - foot and 2-hand operation - CNC backgauge with 4 axes X, R and Z1 + Z2 (the two stop fingers Z can be moved individually) - CNC crowning device for the bottom tool - Hydraulic tool clamping for upper and lower tool - 2 pieces foldable stop fingers - 2 pieces of front material support arms movable with clamping - Protection system on the upper beam BendGuard - not in function - 10-piece upper tool 28° R1 consisting of: 1x 170 / 1x 150 / 4x 100 / 1x 54 / 1x 50 / 1x 45 / 1x 40 mm length - 16-piece bottom tool 30° - V 6 mm, R0.6 mm consisting of: 1x 500 / 1x 300 / 1x200 / 6x 100 / 1x 50 / 1x 45 / 1x 40 / 1x 35 / 1x 30 / 2x 25 mm length - 14-piece bottom tool 84° - V 5 mm, R0.6 mm consisting of: 1x 500 / 4x 100 / 2x 50 / 1x 45 / 1x 40 / 1x 35 / 1x 30 / 3x 25 mm length - 3-part bottom tool 90° - V 8 mm, consisting of: 1x 130 / 1x 95 / 1x 80 mm length - 23820 operating hours read on the operating hours counter in the cabinet Weight 9050 kg space requirement L x W x H 2700 x 2300 x 2890 mm very good condition

more

Listing

Wijchen

(dealership location)

7,087 km

Beyeler Euro 3, 100-4100

Call

Condition: used, Year of construction: 1991, Press brake Model: CNC Bacvsp7e Manufacturer:&nbsp Beyeler Type:&nbsp EuroBrake 3, 100x4100mm Control:&nbsp Cybelec Euro 3 Year: 1991 Capacity:&nbsp 100t Max. working width: 4100mm Motor-power: 8kW Machine-dimensions: 4800x1400x2500mm Machine-weight: 11000kg

more

Listing

Bad Laasphe

6,910 km

Hydraulic CNC press brake

Beyeler RT300x3100

Call

Condition: good (used), Hydraulic press brake Manufacturer: Beyeler Type: RT300x3100 Control: Cybelec DNC 8805 2-D control Graphic Technical data: Y1,Y2,R,X1,X2 -axis 2 stop fingers for backgauge manually adjustable lower cheek a crowning under the die double crowning continuous pressing force 3000 KN retraction force 140 KN working length 3100 mm distance between uprights 2600 mm throat 355 mm distance lower-upper beam 576 mm stroke 265 mm distance bottom-lower beam 828 mm Tool holder A Number of working cylinders 2 Number of crowning cylinders 4 Lower beam with crowning rapid traverse 100 mm/sec. Working speed 8 mm/sec. Retracting speed 74 mm/sec. Holding time of the upper beam 0,1 sec. Main motor power 15 KW Oil filling 400 L backgauge height adjustable ( R-axis ) max. adjustment speed 200 mm/sec. Cb7bhms adjustment range 500 mm direct current motor 0,75 KW 2 two-hand controls ( synchronous control possible ) General machine values length 3310 mm width 2025 mm height 3200 mm Weight 20 to.

more

Listing

Großrudestedt

6,714 km

YAWEI PBC50/2050-4C

Call

Condition: new, Year of construction: 2023, Operating hours: 0 h, new IMMEDIATELY available CNC press brake YAWEI PBC50/2050-4C - Pressing force: 500KN - max. bending length: 2050mm - Year of construction 2023 - CNC controlled hydraulic crowning - Cybelec VISITOUCH 19T control - WILA hydraulic upper tool clamping - 60mm table with 13.5mm x 22mm groove for insertion dies - 2 front support arms can be moved on linear guides - CE with Fiessler AKAS II - 12 months warranty - Commissioning, training I3xtn0vgl

more

Listing

Staufenberg

6,818 km

Press brake

EHT EHPS 15-50 + 2H500 CNC (6050x150t)

Call

pressing force: 150 t, total width: 6,050 cm, throat depth: 350 mm, overall weight: 19,500 kg, Condition: used, Year of construction: 1985, Hydraulic CNC press brake EHT type EHPS 15-50 + 2H500 Year of manufacture 1985 Technical data: Pressing force 150 t Working width 6050 mm in total Bhknrhua9g3 clear stand width 3050 mm throat 350 mm ram stroke 220 mm Weight approx. 19500 kg Drive power 18.5 kW with - CNC control CYBELEC DNC 60 - Tools Underfloor machine used, in good condition Price ex site - without disassembly!

more

Listing

Hamburg

6,807 km

Atlantic HPE 40100

€7,000

Call

Condition: ready for operation (used), Year of construction: 1999, Immediately available from site : CNC press brake Atlantic Type HPE 40100 Year of manufacture 1999 CNC control BC 40 Grafic Printing capacity 100 to Working length 4100 mm column passage 3100 mm throat 250 mm Stroke 200 mmDrive 15 kw Bending speed 11 mm / sec Infeed speed 100 mm / sec Retraction speed 100 mm /sec Weight 8 to Complete upper - lower tools At the price of Euro 7.000.-plus VAT . ex location Bii27cse97d

more

Listing

Hessisch Lichtenau

6,811 km

FASTI 904-125/30

€20,000

CNC Bending Press brake Weinbrenner 250t 4150mm

Call

Condition: used, Year of construction: 1995, CNC press brake FASTI type 904-125/30 make no. 95-904-5775 year of construction 1995 pressure capacity 125 ton. working length 3050 mm stroke approx. 335mm upright projection 300 mm Clearance between the side stands 2550 mm Tool mounting height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) backgauge X-axis 500 mm backgauge R-axis 115 mm backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18,5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7 axes CNC control DELEM type DA 58 with LCD screen - 1 axis for backgauge - stop depth (X-axis) Dyynui - 2 axes for backgauge - stop height (finger R1 + finger R2) - 2 axes for backgauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for pressing beam with servo valves and measuring system Y1 and Y2 - operation by electro foot switch and 2-hand control panel or 2-hand control panel only - hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - safety light barrier FIESSLER, type AKAS - 2 pieces of material support arms in front manually laterally movable and height adjustable - electrical plan, hydraulic plan, user manual for control available - control cabinet at the machine - without tools space requirement L x W x H 5000 x 2500 x 3050 mm transport dimensions L x W x H 5200 x 1900 x 2950 mm weight 8,5 ton. good condition

more

Listing

Wijchen

(dealership location)

7,087 km

Weinbrenner GP 250t, 4150mm

Call

Condition: used, Year of construction: 1994, Press brake Model: CNC Manufacturer:&nbsp Weinbrenner Type:&nbsp GP 250 Control:&nbsp Cybelec DNC 900 PressCad Capacity: 250t Ytgu7ufn Max. sheet-width: 4150mm Max stroke: 224mm Back-gauge: 1800mm controlled! Inclusief quick-tooling-exchange-device Inclusief&nbsp mold adjustment Inclusief bombing Inclusief&nbsp various tooling Machine-weight: 22000kg Machine-dimensions: 4500x3400x3000mm (width/back-gauge dismantled for transport)

more

Listing

Bad Laasphe

6,910 km

CNC Hydraulic Press Brake EHT 6050

EHT Vario Press 250-60

Call

Condition: good (used), Year of construction: 1998, 5-axis CNC Hydraulic Press Brake Manufacturer : EHT Type : Vario Press 250-60 Year of manufacture : 1998 Control type : NC Control name : DNC74PSG Hydraulic press brake EHT Variopress 250-60 with controlled back length stop system. The EHT press brake has a foundation for the lower beam due to the high power and bending width of 6000 mm. Technical data of hydraulic press brake VARIOPRESS 250-60: 5-axis Y1, Y2, crowning, backgauge, R-axis. pressure: 250 t bending length: 6050 mm column width: 5550 mm total length: 8400 mm total width: 3900 mm Total height above floor: 4070 mm Wgaa03rl total depth under corridor: 950 mm working length: 6050 mm distance between machine uprights: 5550 mm column projection: 350 mm ram stroke: 270 mm Distance between table and ram: min. 360 mm to max. 630 mm Maximum pressing force: 2500 kN Stroke speed: idle max. 100 mm/s, press stroke max. 8 mm/s, retract max. 100 mm/s Machine weight: 42,800 kg incl. Multi V die, one through die and split dies. During bending, the workpiece (the sheet or flat steel) is pressed by a defined downward movement from the press beam into the die on the bottom side. A back gauge moves the sheet to the desired bending position. Due to the takeover of the company EHT by the company Trumpf, the spare parts supply and the service are still well available.

more

Listing

Großrudestedt

6,714 km

Press brake EHT 110 T 2,5m CNC

YAWEI PBH220/4100-7C

Call

Condition: new, Year of construction: 2023, Immediately available, highly upgraded CNC press brake YAWEI PBH220/4100-7C - Pressing force: 2200KN - max. bending length: 4100mm - Year of construction 2023 - CNC controlled hydraulic crowning - Cybelec VISITOUCH 19T control Kzndjcjivz - 7 CNC controlled axes - Y1/Y2, X, R, Z1 + Z2, X1 (Delta X) - Mechanical quick clamping upper tools type Amada - 60mm table with 13.5mm x 22mm groove for insertion dies - 2 front support arms can be moved on linear guides - CE with Fiessler AKAS IIF (automatic height adjustment) - 24 month guarantee - Commissioning, training

more

Listing

Trzcianka

6,372 km

EHT 110 T - 2,5m CNC

Call

Condition: excellent (used), Year of construction: 1991, EHT 110 TON Press Brake efficient machine connected to electricity with the possibility of checking at work Lt9oihqk - Cybelec cnc control in Y1 Y2 X R axes - electrically adjustable front supports - electrically adjustable sheet metal support under the back guage The machine is connected to electricity, with the possibility of checking it at work.

more

Listing

Hamburg

6,807 km

RT 160 x 4100 Beyeler

€12,500

Call

Condition: ready for operation (used), Year of construction: 1992, Available immediately from location : CNC press brake Beyeler Type RT 160 x 4100 Year of construction 1992 Pressure capacity 160 to Working length 4100 mm Table 4200 x 200 mm Clear stand width 3600 mm Machine is at ground level, no floor recess CNC control DNC 94 Color 3 D Stroke 215 mm throat 325 mm Upwards 90 mm / s Downwards 9.1 m / s Working speed 100 mm / s Distance table - upper beam 340 mm largest, smallest distance 125 mm 2 measuring scales for Y 1 & Y 2 axes LS 623 Heidenhain Psrgjcxfa Hydraulic punch clamping Hydraulic die clamping Weight 17.5 to Drive power 20 kw Complete tools For the price of Euro 12,500 plus VAT ex location

more

Listing

LOTZE PZ 150 (4500 x 150 t) Cybelec DNC 70

Mörsdorf

6,664 km

Press brake CNC bending press Darley 110t 3100mm

LOTZE PZ 150 (4500 x 150 t) Cybelec DNC 70

Call

Condition: repair required (used), Year of construction: 1982, Operating hours: 3,200 h, CNC press brake make LOTZE type PZ 150 Machine # 20327455 Year of construction 1982 only 3200 operating hours Issry33 technical data: max. pressing force 150 t max. working length 4500 mm table width 350 mm column passage 4000 mm installation height 500 mm throat 200 mm table height 1140 mm opening width 490 mm Table under floor 580 mm Downward speed idle max. 100 mm/I Upward speed 68.2 mm/I Pressing speed 7,5 mm/I Drive power 12.5 kW Dimensions L x W x H (max) 5400 x 2000 x 3500 mm transport height 3350 mm weight approx. 16000 kg with - CNC control Cybelec DNC 70 (faulty) control was retrofitted or rebuilt in 1993 - universal die 90 x 90 mm, 4000 mm long - split die 4000 mm long, height 195 mm (3 pcs. a'1350 mm) - foot switch with two-hand disengagement - motorized back gauge 5 - 1000 mm - above floor machine used, in good condition but the control is in need of overhaul (not ready for use) special price as available

more

Listing

Wijchen

(dealership location)

7,087 km

Darley EHP-L 110 31/25

Call

Condition: used, Year of construction: 1999, Press brake Chttdyku0m Model: CNC Manufacturer:&nbsp Darley Type:&nbsp EHP-L 110 31/25 Capacity:&nbsp 110t Maximum&nbsp sheet-width: 3100mm Control:&nbsp Delem DA 65 Controlled axes: Y1 Y2 - X R1 R2 Z1 Z2 + Bombering! In perfect condition Including hydraulic tool-clamps Including Wila bombering Including light safety curtains Machine-dimensions: 36600x2000x2550mm

more

Listing

Baykal APHS 3106x120 Y1,Y2,X,R, cnc crowning

Δέλτα 570 22, Ελλάδα

5,716 km

CNC Press brake

Baykal APHS 3106x120 Y1,Y2,X,R, cnc crowning

€18,000

EXW Fixed price plus VAT

Call

Condition: good (used), Year of construction: 2002, CNC Press brake Baykal APHS 3106x120tn Y1,Y2,X,R with cnc crowing system length 3100mm Dltsntdap capacity 120tn kw 11 system pressure 240 bar max stroke 230mm machine weight 7000kg machine dimensions 3550x 1800x 2800mm

more

Listing

Großrudestedt

6,714 km

Press brake 125 t 3650mm CNC

YAWEI PBH80/2550-4C

Call

Condition: new, Year of construction: 2023, Operating hours: 0 h, New IMMEDIATELY available CNC press brake YAWEI PBH80/2550-4C - Pressing force: 800KN - max. bending length: 2550mm - Year of construction 2023 - CNC controlled hydraulic crowning Cirrmer7jm - Cybelec VISITOUCH 19T control - Upper tool clamping - mechanical quick clamping type Amada - 60mm table with 13.5mm x 22mm groove for insertion dies - 2 front support arms can be moved on linear guides - CE with Fiessler AKAS II - 12 months warranty - Commissioning, training

more

Listing

Trzcianka

6,372 km

FINNPOWER CNCJ

Call

Condition: good (used), Year of construction: 1990, Press Brake FINNPOWER force 125 ton bending lenght 3650mm CNC controller Cybelec 1200 CNC in 7 axes : Y1 Y2 X duo R1 R2 Z1 Z2 V Huy2vp8 full books for machine extra flattening table Press brake imported from Germany machine under power , can be checked at work

more

Listing

Hamburg

6,807 km

Darley EHP 200 43/ 37

€13,500

Hydraulic Press brake CNC

Call

Condition: ready for operation (used), Year of construction: 1992, Immediately available from site : CNC press brake Darley Type EHP 200 43/ 37 Year of manufacture 1992 Pressure capacity 200 to Working length 4300 mm column passage 3700 mm CNC control Delem DA 58 2jufqm7 stroke 225 mm Lateral projection 300 mm Sinking speed 80 mm / sec Pressing speed 8.5 mm / sec Retraction 50 mm / sec Drive 15 kw Weight 18 to Foot switch Complete upper - lower tools At the price of Euro 13.500.-plus VAT ex location

more

Listing

Mouscron

7,265 km

LVD PPEB-8 80/25

Call

Condition: excellent (used), Year of construction: 2009, Hydraulic press brake LVD PPEB-8 80/25 Touch-B Year of construction 2009 Technical specifications Force 800kN Working length 2500mm Distance between uprights 2050mm Stroke 200mm Distance table – ram 400mm Gap 400mm Approach speed 130mm/s Working speed 11mm/s Return speed 115mm/s weight 6500 kg motor 7.5kW COMMAND CONTROL TOUCH-B • Table PP8170 V-axe • top tool clamping PP3090 – Wila • hydraulic top tool clamping PP3100 • hydraulic clamping die PP3160 9vamwivymn • Back gauge X600 X’ R Z1 Z2 PP8096 • Security; CE PP3580 – lasersafe

more

Listing

Wijchen

(dealership location)

7,087 km

Press brake CNC bending press Steiner 260t 4050mm

Steiner AK25/40C, 260t 4050mm

Call

Condition: used, Year of construction: 1989, Press brake Model: CNC Manufacturer:&nbsp Steiner Type: AK25/40C Capacity: 260t Max. working width: 4050mm Width between uprights: 3100mm Control:&nbsp Cybelec DNC 600S Including automatic bombering Including&nbsp nice multi-v and upper-knives in segments Including documentation Disc with parameters etc. Dimensions: 3450x2100x4800mm Weight: 25000kg Cgjwd9t2wy

more

Listing

L'alcúdia de Crespíns

7,719 km

Haco CNC Hydraulic Press Brake ERM

HACO ERM 40 300

Call

Condition: excellent (used), Haco CNC Hydraulic Press Brake model ERM 40 300 of 4100mm x 300tns of 6 axes and deflection or compensating table, with CNC CYBELEC Visipac -VP 88 / VSP - 84PS-2 year 2022, hydraulic clamping of the punch, bending distance 4100, between uprights 3150mm , swan neckline 350mm course 0mm, installed power 23 kw, machine without pit, machine in very good condition. transport measures 5mts x 2.2mts x 2.85mts high E3dwbpd

more

Listing

Bydgoszcz

6,270 km

Otinus PBO-6050-CNC OT-41

€1,68,550

Press brake LVD PPMNZ 50 - 3 m CNC

Call

Condition: new, Year of construction: 2023, Hydraulic press brake PBO-6050-CNC OT-41 WC67Y 500/6000 Specifications - Max working thickness (S235): up to 15.0 mm - Nominal pressure: 5000 kN - Max working length 6000 mm - Throat depth: 400 mm - Max stroke: 300 mm - Daylight: 610 mm - Distance between side frames: 4800 mm - Max backgauge distance: 500 mm - Nominal motor power: 37.0 kW - Length: 6100 mm - Width: 2200 mm - Height: 3500 mm - Weight: 38000.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. H8zqnitmu Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

more

Listing

Trzcianka

6,372 km

LVD PPMNZ 50-30 CNC

Call

Condition: good (used), Year of construction: 1992, LVD PPMNZ 50 ton - 3m CNC year 1992 Bf8rfmj07ps CNC AUTOBEND 7 cnc in 3 axes Y1 Y2 X The machine is connected to electricity, with the possibility of checking it at work.

more

Listing

BEYELER EU 100-3100 CNC-Steuerung CYBELEC

Staufenberg

6,818 km

Hydraulic Press brake CNC

BEYELER EU 100-3100 CNC-Steuerung CYBELEC

Call

Condition: used, Year of construction: 1991, CNC press brake make BEYELER type EU 100-3100 Machine # 591083171 Year of manufacture 1991 Technical data: Pressing force 100 t bending length 3100 mm passage between the uprights 2600 mm lateral projection 255 mm bending speed 7,0 mm/sec. Dlpcv7 rapid traverse 100 mm/sec. retraction speed 110 mm/sec. stroke 215 mm backgauge depth 500 mm Backgauge speed 200 mm/sec. Oil volume 105 l motor power 5,5 kW outer dimensions approx. 3685 x 1340 x 2500 mm weight approx. 7,0 t with - CNC control CYBELEC used, in good condition

more

Listing

Mouscron

7,265 km

LVD PPEB EFL 135/30 TOUCH-B

Call

Condition: excellent (used), Year of construction: 2012, Hydraulic press brake LVD PPEB-EFL 135/30 Touch-B Year of construction 2012 Technical specifications Force 1350kN Working length 3050mm Distance between uprights 2600mm Stroke 300mm Distance table – ram 500mm Cwoncqt0m2 Gap 400mm Version TURBO PP5400 Approach speed 180mm/s Working speed 22mm/s Return speed 200mm/s weight 10.000 kg motor 22kW TOUCH-B Controller • Easy form laser EFL 90mm – W axe – PP8302 • Table PP8170 V-axe • top tool clamping WILA PP3090 • hydraulic top tool clamping PP3100 • Back gauge X600 R • Security; CE PP3580 – lasersafe PP5320

more

Listing

Wijchen

(dealership location)

7,087 km

CNC Press brake bending press Amada 80t 2500mm ITS

AMADA PROMECAM ITS-080-25, 80t 2500mm

Call

Condition: used, Year of construction: 1990, Press brake bending press Model: CNC Manufacturer:&nbsp Amada Type:&nbsp ITS-080-25 Controller:&nbsp MBC CNC D9uvbegp0 Capacity: 80t Max. working width: 2500mm Max. stroke: 105mm Motor-power: 9,5kW Incl. documentation

more

Listing

Bloomfield Rd, Tipton DY4 9ET, UK

7,615 km

CNC PRESS BRAKE

AMADA PROMECAM ITS2 2512

Call

Condition: good (used), Year of construction: 1998, AMADA PROMECAM ITS2 2512 CNC PRESS BRAKE MAKE AMADA PROMECAM, MADE IN FRANCE MODEL ITS2 2512 YEAR 1998 CONTROL OPERATEUR 2 TONNAGE 25 TONS LENGTH 1250.0 mm NO OF AXES 4 AXIS CNC Dmbsnh GUARDING SICK OPERATOR LIGHT GUARD TOOLING FULL SET OF CLAMPS PLUS UPSTROKING HYDRAULIC PRESS BRAKE FOOT CONTROL PENDANT FULL SET OF MANUALS FULL SET OF CLAMPS SET OF TOP AND BOTTOM TOOLING

more

Listing

Bydgoszcz

6,270 km

Otinus PBO-3280-CNC OT-41

€37,572

Baykal APHS PRO press brake CNC for all

Call

Condition: new, Year of construction: 2023, Hydraulic press brake PBO-3280-CNC OT-41 WC67Y 80/3200 Specifications - Max working thickness (S235): up to 4.0 mm - Nominal pressure: 800 kN - Max working length 3200 mm - Throat depth: 250 mm - Max stroke: 120 mm - Daylight: 385 mm - Distance between side frames: 2700 mm - Max backgauge distance: 500 mm - Nominal motor power: 5.5 kW - Length: 3300 mm - Width: 1450 mm - Height: 2300 mm - Weight: 4800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. Rbqqf OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

more

Listing

Wijchen

(dealership location)

7,087 km

Baykal APHS PRO

Call

Condition: new, Year of construction: 2023, Baykal Nederland is enkel leverancier voor de Nederlandse markt Baykal Nederland can only supply the Dutch&nbsp market Premium plaatbewerkingsmachines voor eerlijke prijzen &Eacute &eacute n adres voor Advies / Verkoop / Installatie / Training / Service / Onderhoud ! Kantbanken standaard &eacute n snel leverbaar in de volgende capaciteiten: Perskracht: 40t - 600t Werkbreedte: 1250mm - 6100mm B0baixv9 &gt 600t &ograve f &gt 6100mm?&nbsp Zeker mogelijk met onze Baykal APHS specials! Onze Baykal AHPS PRO&nbsp kantbank is&nbsp standaard met de volgende configuratie: * CE-keurmerk AKAS-protections * Controller: ESA S675 21" 2D * Achteraanslag:&nbsp X-R servo-gestuurd * Bombering: Mechanisch * Werkstukopname: Amada/PromecamLiever een energiezuinige en supersnelle Hybrid-variant?&nbsp Think Big, We&nbsp Do! Liever de modernste DELEM of CYBELEC besturing?&nbsp Think Big, We&nbsp Do! Liever een 6-assen gestuurde achteraanslag?&nbsp Think Big, We&nbsp Do! Liever WILA opname met hydraulische klemming?&nbsp Think Big, We&nbsp Do! Bespreek&nbsp deze en&nbsp ontelbare&nbsp andere&nbsp mogelijkheden en kom samen tot de perfect passende kantbank! Baykal Nederland&nbsp in samenwerking met Second Owner

more

Listing

Bloomfield Rd, Tipton DY4 9ET, UK

7,615 km

CNC 7 Axis Press Brake

AMADA PROMECAM APX 103

Call

Condition: like new (used), Year of construction: 1995, MAKE - AMADA MODEL - PROMCAM APX 103 YEAR - 1995 CONTROL - OPERATEUR CAPACITY - 100 TONS BENDING LENGTH - 3100.0 mm OPEN HEIGHT - 370.0 mm STROKE LENGTH - 100.0 mm THROAT DEPTH - 400.0 mm MOTOR POWER - 9KW WEIGHT - 6400 KG PLUS - Iyb9zcj2o 7 AXIS- Y, R1,R2,X1,X2,Z1,Z2 COLOURED GRAPHIC SCREEN FULL SET OF TOOL CLAMPS SICK OPERATOR SAFETY LIGHT GUARDS

more

Listing

Bydgoszcz

6,270 km

Otinus PBO-3280-CNC Delem DA-58T

€53,286

Call

Condition: new, Year of construction: 2023, Hydraulic press brake PBO-3280-CNC Delem DA-58T WC67Y 80/3200 Specifications - Max working thickness (S235): up to 4.0 mm - Nominal pressure: 800 kN - Max working length 3200 mm - Throat depth: 250 mm - Max stroke: 120 mm - Daylight: 385 mm - Distance between side frames: 2700 mm - Max backgauge distance: 500 mm - Nominal motor power: 5.5 kW - Length: 3300 mm - Width: 1450 mm - Height: 2300 mm - Weight: 4700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process Pxnpl3 - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

more

Listing

Bydgoszcz

6,270 km

Otinus PBO-3263-CNC OT-41

€34,072

Call

Condition: new, Year of construction: 2023, Hydraulic press brake PBO-3263-CNC OT-41 WC67Y 63/3200 Specifications - Max working thickness (S235): up to 4.0 mm - Nominal pressure: 630 kN - Max working length 3200 mm - Throat depth: 250 mm - Max stroke: 120 mm - Daylight: 370 mm - Distance between side frames: 2700 mm - Max backgauge distance: 500 mm - Nominal motor power: 5.5 kW - Length: 3300 mm - Width: 1400 mm - Height: 2200 mm - Weight: 4700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty Gzkgs8 - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

more

Listing

Bydgoszcz

6,270 km

Otinus PBO-3263-CNC Delem DA-58T

€49,786

Call

Condition: new, Year of construction: 2023, Hydraulic press brake PBO-3263-CNC Delem DA-58T WC67Y 63/3200 Specifications - Max working thickness (S235): do 4.0 mm - Nominal pressure: 630 kN - Max working length 3200 mm - Throat depth: 250 mm - Max stroke: 120 mm - Daylight: 370 mm - Distance between side frames: 2700 mm - Max backgauge distance: 500 mm - Nominal motor power: 5.5 kW - Length: 3300 mm - Width: 1400 mm - Height: 2200 mm - Weight: 4600.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of hours of Otinus Assistance to each machine purchased. D2kf78v See and test the machine Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours (during 12 months) Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - Lead time: approx. 6-8 weeks - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

more

Listing

Bydgoszcz

6,270 km

Otinus PBO-3225-CNC Delem DA-58T

€72,239

Call

Condition: new, Year of construction: 2023, Hydraulic press brake PBO-3225-CNC Delem DA-58T WC67Y 250/3200 Specifications - Max working thickness (S235): up to 10.0 mm - Nominal pressure: 2500 kN - Max working length 3200 mm - Throat depth: 400 mm - Max stroke: 250 mm - Daylight: 535 mm - Distance between side frames: 2500 mm - Max backgauge distance: 500 mm - Nominal motor power: 18.5 kW - Length: 3300 mm - Width: 1850 mm - Height: 2900 mm - Weight: 11600.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new Chubczolzi - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

more

Listing

Bydgoszcz

6,270 km

Otinus PBO-3220-CNC OT-41

€53,358

Hydraulic Press Brake CNC

Call

Condition: new, Year of construction: 2023, Hydraulic press brake PBO-3220-CNC OT-41 WC67Y 200/3200 Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 2000 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 200 mm - Daylight: 480 mm - Distance between side frames: 2700 mm - Max backgauge distance: 500 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1800 mm - Height: 2700 mm - Weight: 10600.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping 0sv9g Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

more

Listing

Bydgoszcz

6,269 km

Otinus PBO-3216-N Estun E21

€39,738

Call

Condition: new, Year of construction: 2023, Hydraulic press brake PBO-3216-N Estun E21 WC67Y 160/3200 Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 500 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor Cw09o92m - Type of punch holder: AMADA quick-action clamping E21 controller (Mounted on a swivel arm) - Controls X (backgauge) and Y (ram) axes - Allows the creation of up to 40 programmes - Each programme may consist of 25 steps - Intuitive operation through the use of English abbreviations, which are explained during training It is a sophisticated but easy-to-use controller that allows operation in three modes: - Manual - Single automatic - Serial automatic Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

more

Listing

Bydgoszcz

6,269 km

Press Brake CNC

Otinus PBO-2563-CNC OT-41

€28,786

Call

Condition: new, Year of construction: 2023, Hydraulic press brake PBO-2563-CNC OT-41 WC67Y 63/2500 Specifications - Max working thickness (S235): up to 4.0 mm - Nominal pressure: 630 kN - Max working length 2500 mm - Throat depth: 250 mm - Max stroke: 120 mm - Daylight: 370 mm - Distance between side frames: 2000 mm - Max backgauge distance: 500 mm - Nominal motor power: 5.5 kW - Length: 2600 mm - Width: 1400 mm - Height: 2200 mm - Weight: 3700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor Br9tkz8jeg - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

more

Listing

Bydgoszcz

6,269 km

Otinus PBO-2563-CNC Delem DA-58T

€48,905

Call

Condition: new, Year of construction: 2023, Hydraulic press brake PBO-2563-CNC Delem DA-58T WC67Y 63/2500 Specifications - Max working thickness (S235): up to 4.0 mm - Nominal pressure: 630 kN - Max working length 2500 mm - Throat depth: 250 mm - Max stroke: 120 mm - Daylight: 370 mm - Distance between side frames: 2000 mm - Max backgauge distance: 500 mm - Nominal motor power: 5.5 kW - Length: 2600 mm - Width: 1400 mm - Height: 2200 mm - Weight: 3600.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site Br9tnpy2yp

more

Listing

Bydgoszcz

6,270 km

Otinus PBO-2580-CNC Delem DA-58T

€50,215

Hydraulic Press Brake CNC

Call

Condition: new, Year of construction: 2023, Hydraulic press brake PBO-2580-CNC Delem DA-58T WC67Y 80/2500 Specifications - Max working thickness (S235): up to 4.0 mm - Nominal pressure: 800 kN - Max working length 2500 mm - Throat depth: 250 mm - Max stroke: 120 mm - Daylight: 385 mm - Distance between side frames: 2000 mm - Max backgauge distance: 500 mm - Nominal motor power: 5.5 kW - Length: 2600 mm - Width: 1450 mm - Height: 2300 mm - Weight: 4400.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor Rbqiv - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

more

Listing

Bydgoszcz

6,269 km

Otinus PBO-2520-CNC OT-41

€50,524

Call

Condition: new, Year of construction: 2023, Hydraulic press brake PBO-2520-CNC OT-41 WC67Y 200/2500 Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 2000 kN - Max working length 2500 mm - Throat depth: 320 mm - Max stroke: 200 mm - Daylight: 480 mm - Distance between side frames: 2000 mm - Max backgauge distance: 500 mm - Nominal motor power: 15.0 kW - Length: 2600 mm - Width: 1800 mm - Height: 2700 mm - Weight: 8900.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller Yfjgczs - The Client is responsible for the machine during unloading and transporting on-site

more

Listing

Bydgoszcz

6,270 km

Otinus PBO-2520-CNC Delem DA-58T

€66,239

Call

Condition: new, Year of construction: 2023, Hydraulic press brake PBO-2520-CNC Delem DA-58T WC67Y 200/2500 V73yfc7f Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 2000 kN - Max working length 2500 mm - Throat depth: 320 mm - Max stroke: 200 mm - Daylight: 480 mm - Distance between side frames: 2000 mm - Max backgauge distance: 500 mm - Nominal motor power: 15.0 kW - Length: 2600 mm - Width: 1800 mm - Height: 2700 mm - Weight: 8800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

more

Listing

Bydgoszcz

6,270 km

Otinus PBO-2040-CNC OT-41

€28,190