Used Cnc Turning And Milling Machine for sale (70,353)

Condition: good (used), Year of construction: 2008, operating hours: 72,899 h, functionality: fully functional, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, total height: 3,040 mm, total length: 7,800 mm, total width: 4,100 mm, overall weight: 16,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, DMG GILDEMEISTER GMX 250 LINEAR CNC Turning and Milling Center - Recorded spindle hours: 39,361 - Swing diameter: 640 mm - Counter spindle turning diameter: 400 mm - Spindle distance: 1,500 mm - X1 axis travel: 550 mm - Y1 axis travel: 180 mm - Z1 axis travel: 1,185 mm - B1 axis travel: 240° - X2 axis travel: 180 mm - Z2 axis travel: 1,050 mm - Z3 axis travel: 1,150 mm - Spindle speed range: 3,200/4,000 rpm - Rapid traverse rate, Slide 1 (X/Y/Z): 40/24/70 m/min - Rapid traverse rate, Slide 2 (X/Z): 24/36 m/min - Rapid traverse rate, Slide 3 (Z): 36 m/min - Tool holder: HSK 63 - Spindle speed: 12,000 rpm - Number of tool stations in chain magazine: 40 stations - Incl. tool holders mounted on the turret - Incl. bar loader, manufacturer: COCCHE GIOVANNI, type: CNC-DB 110, year of manufacture: 2008, serial number: CNCDB-08.306, weight: 1,500 kg Note: The machine has the following defects: Njdjyaqczepfx Aa Dewb - The hydraulic unit is faulty – it needs to be repaired - The Q2 axis (milling spindle tool changer) fails frequently - X2 axis (guideways) moves slightly askew - The linear guides and drives show wear commensurate with age Attention: A vehicle with 3,000 mm transport width is required for transport! FCA D-58256 Ennepetal, loaded onto truck at a mutually agreed date at the end of February 2026.

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN type PICOMAX 100-CNC 3 CNC control HEIDENHAIN TNC 155 make no. 16186651 year of construction 1986 spindle holder FEHLMANN SF32 drilling capacity Ø 30 mm in steel threading up to M20 in steel travel X: 850 mm, Y: 435 mm pinol stroke Z: 210 mm vertical movement milling head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid traverse X and Y 8 m/min. Nedpfxehik Ezs Aa Djwb rapid traverse Z 4 m/min. Table clamping surface 1570 x 500 mm distance spindle nose - table 130 - 720 mm projection spindle - column 450 mm Spindle speed 50 - 7100 rpm. Stepless spindle drive 10 kW Total connected power 20 kW Mains connection 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z pinol adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - thread cutting device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shut-off via adjustable cams - 3D probe RENISHAW, type MP 11F with holder Fehlmann SF32 - 20 tool holders FEHLMANN SF32 - swivelling tool holder with 21 tool places - Coolant device in the machine column - control cabinet fixed to the machine - Documentation Operating manual, control manual and E-circuit diagrams space requirement L x W x H 2350 x 2000 x 2300 mm weight 3,2 ton. very good condition

Condition: new, Year of construction: 2026, rotational speed (max.): 36,000 rpm, Perfect for: Highly efficient 3D milling of small workpieces – precise milling with high output Materials: Plastics, composite materials such as CFRP / GFRP, model-building materials, aluminum Nwjdpsx Uw Stofx Aa Djb Industries: Automotive, aerospace, transport & logistics, leisure industry, sanitary, boatbuilding, automation Reference number: 1221 Availability: April 2026 Model: 5-axis CNC milling machine G-S-F/B (25-13) Spindle data: 8 kW / 6.4 Nm; 1,000–36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 80/80/60 Workpiece dimensions X/Y/Z: 2,500 x 1,300 x 600 Control: SIEMENS – Sinumerik One with HT 2 handheld terminal Tool changer: 13 tools Tables: 1 rotary table Vacuum system: yes Tool breakage and length detection: Renishaw TS 27 R Other: upon request Year of manufacture: 2026 Condition: new

Condition: used, Year of construction: 2001, turning diameter / mm turning length / mm control / total power requirement / kW Njdjx Tu Suspfx Aa Djwb weight of the machine ca. / t required space / m

Condition: ready for operation (used), total height: 3,600 mm, empty load weight: 22,000 kg, Schiess Ø 2070 x H 1330 mm Chuck dia.: Ø 1700 mm Max turningdia -- passage: Ø 2070 mm - H 1330 mm Power on the spindle: 30 kW Nedpfx Aajycmqgs Dowb Max hight of workpiece Z-axis: 1330 mm (Z: 1000mm) Number of speeds: 1.7 -> 53 rpm

Condition: ready for operation (used), controller manufacturer: Heidenhain iTNC530, empty load weight: 1,70,000 kg, Zware portaalfreesmachine Type: FPM-50/200 - tussen kolommen: 3480 mm - met automatische indexeerfreeskop (elke 0,1° in beide vlakken) 27 kW / max. 6000 tpm / 660 Nm hogedrukkoeling via de spindel (17 bar) - 2 Heidenhain-operatorstations - gereedschapswisselaar met 120 posities - 2 spanentransportbanden - met koel- en filtereenheid en zelfreinigend systeem Als u de linker- en rechterkant van een werkstuk wilt bewerken, is de maximale breedte 3200 mm. In de huidige configuratie staat de tafel op de grond. Maar als je de tafel lager zet, kun je er ook hogere werkstukken op kwijt. Passage beween uprights: 3480 mm Longitudinal travel X-axe: 20 000 mm Cross travel Y-axe: 3800 mm Travel (height) Z-axe: 1350 mm Nwjdpfx Aoycmnrsa Dob Dimensions Clamping space - table: 20 000 x 2500 mm Max height of workpiece: 1750 mm (adjustable - according to table position) Power on spindle: 27 kW - 660 Nm Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 10 > 6000 rpm Cooling system: yes Toolchanger: yes Number of tools: 120 positions

Condition: ready for operation (used), chuck outer diameter: 2,000 mm, empty load weight: 35,000 kg, Rafamet KCF 200 verticale draaibank De Rafamet is een robuuste draaibank met de volgende capaciteiten: * max. afmetingen werkstuk: - Hoogte: 1.690 mm - Ø werkstuk: 2.400 mm Dit type machine is ideaal voor ombouw naar CNC! Max turningdia -- passage: 2.400 mm Power on the spindle: 55 kW Max hight of workpiece Z-axis: 1.690 mm (Z= 1.000 mm) Digital screen: Yes Nodpfsycmqaex Aa Djwb

Condition: ready for operation (used), chuck outer diameter: 1,620 mm, total height: 4,650 mm, empty load weight: 20,000 kg, + zijsteun Elektrisch vernieuwd in 2007!!! Njdeycmpvopfx Aa Dswb Max turningdia -- passage: 1700 mm Power on the spindle: 37 kW Max hight of workpiece Z-axis: 1290 mm Digital screen: Heidenhain 2 axes Number of speeds: 3,5 - 150 rpm Long: 4550 mm Wide: 2670 mm

Condition: used, Year of construction: 2007, turning diameter 42 / 140 mm turning length 170 mm control Mitsubishi Meldas turning speeds 80-8.000 U/min c-axis 0,001° turret (x-stations) 2x 12 (VDI 20) angetrieben turning speeds 45-4.500 U/min spindle 1 kW gripping station 42 mm turning speeds 60-6.000 U/min c-axis 0,001° number of controlled axis 8 collet unit 48 DIN 6343 . Number of working hours 10769 h chip conveyor ja/yes Bj. 2018 total power requirement 7,5 / 11 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 2,4 x 1,6 x 2,2 m CNC turning and milling machine CITIZEN BOLEY BE 42, year 2007 Simultaneous working with 7 axes on main and pick-up spindle very good condition, operating hours 21.999h (September 2024) Accessories: # Various tool holders: 5x axiale driven tool holder # collet chuck for collets type 173E # additional coolant cooler # Knoll chip conveyor, year of construction 2018 The Boley BE 42 is without barloader. Loading magazine interface has been fitted. Complete battery exchange on 22.12.2025 Nedovyli Eepfx Aa Djwb

Condition: like new (used), Year of construction: 2023, operating hours: 3,751 h, functionality: fully functional, turning length: 700 mm, turning diameter: 356 mm, spindle speed (min.): 6,000 rpm, spindle bore: 81 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 795 mm, DMG MORI NLX2500/700 universal lathe with Y-axis, bar feeder, and driven tools. Main and sub spindle. Spindle bore diameter: 81 mm. INCLUDING tool package (purchase price €64,000 / see attachment). Nwedpfx Aasx Sp Izj Djb

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. For more information about this lathe, please refer to the attached brochure or contact us directly. Equipment includes: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle - Tool presetting device - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request. Nsdpfx Aaexmhdne Dewb

Condition: reconditioned (used), Year of construction: 2005, Cycle-controlled lathe GILDEMEISTER NEF 520 With MANUAL PLUS 4110 control Year of manufacture: 2005 Spindle bore: 70 mm Center distance: 1000 mm O rotation over bed: 500 mm O rotation over cross slide: 290 mm Center height: 250 mm Speed range: 10 - 3050 rpm infinitely variable With the following accessories: Sliding guard with interior lighting Nwsdpfx Aeuda Tnja Djb 8-station Sauter VDI 30 turret with driven tools 10 pcs. VDI 30 tool holders 2 pcs. driven tools VDI 30 Coolant device 3 jaw chucks SCHUNK ROTA 0 250 mm ICP contour programming Tailstock with extendable drilling quill Chip tray Operating instructions

Condition: used, _____ Description: Year of manuf. : 2022 Control : Okuma OSP-P300 SA Turning diam. : 650 mm Turning length : 1000 mm Main spindle: Technology:Motor spindle Speed:4,200 rpm Power:22 kW Torque:427 Nm spindle bore:91 mm Hollow clamping cylinder:86 mm C-axis:High precision package Chuck:SMW KNCS-N 275-86 K8 Njdewu I Irepfx Aa Dswb Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:22 kW Torque:420 Nm spindle bore:80 mm Hollow clamping cylinder:77 mm C-axis:High precision package Chuck:SMW BHD-FC 210-52-3 Tool carrier X/Y/Z/B: Technology:Milling spindle Speed:12.000 rpm Power:22 kW Torque:120 Nm Tool holder:HSK 63 Y-axis:250 mm (+/- 125 mm) B-axis:240° Tool magazin: Number of stations:80 Equipment: Measuring systems:Direct in X/Y/Z axis (glass scales) Chip disposal:Chip conveyor Coolant supply:IKZ system, 70 bar Coolant temperature control:Deltatherm E4 Chip rinsing:working area, manual gun Accuracy package:C-axis high accuracy Software package:5-axis auto-tuning Software option:Multifunction tool Gear cutting software package:Gear hobbing, gear peeling Control extension:Dialogue programming Workpiece measurement:Renishaw measuring probe Tool measurement:Tool setter Tool breakage monitoring:Renishaw TRS2 B-axis:NC function and turning function Bar loader:LNS Quickload Servo III+ Automation preparation:Robot interface Work area door:Automatic Set-up mode:Electronic handwheel

Condition: used, _____ Description: Year of manuf. : 2009 Control : Siemens C200-4D SL In General: Year of construction:2009 Control system:Siemens 840 Dsl (C200-4D SL) Bar capacity:65 mm Milling spindles:18,000 rpm Main spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° Z-axis:390 mm Bar capacity:65 mm Clamping cylinder:Hollow clamping cylinder Chuck:3-jaw chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° X-axis:600 mm Z-axis:390 mm Bar capacity:65 mm Chuck:3-jaw chuck Tool carrier I: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 X-axis:350 mm Y-axis:160 mm (+/- 80 mm) B-axis:230° Tool carrier II: Technology:Milling spindle on cross slide Speed:18,000 rpm Nsdpsvxmy Njfx Aa Dswb Tool holder:HSK 40 Y-axis:160 mm(+/- 80 mm) B-axis:230° Tool magazin: Technology:Chain magazine Number of stations:80 pieces Tool changer:Double gripper Tool length max.:180 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system with filter Parts removal:Gantry-type pick-up Bar loader interface:Electrically prepared Tool monitoring:Drill breakage monitoring

Condition: used, Year of construction: 2024, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2024 Control : Siemens 840 Dsl - Operate Turning diam. : 400 mm Turning length : 1100 mm Main spindle: Nsdpfx Aaox Ih Rts Dswb Technology:Motorspindle Speed:5.000 rpm Power (max.):17 kW Torque (max.):345 Nm Clamping cylinder:Hollow clamping cylinder Bar capacity:67 mm Workpiececlampig:3-Jawchuck, Schunk Rota THW 315-104 Sub spindle: Technology:Motorspindle Speed:5,000 rpm Power (max.):17 kW Torque (max.):345 Nm Clamping cylinder:Partially hollow clamping cylinder Workpiececlamping:3-Jawchuck, SMW Autoblok 250 BB Movement in Z:1.200 mm Thrustforce (Tailstockfunction):2,5-6 kN Tool carrier (X/Y/Z/B): Technology:Travelling column with millingspindle Speed:12.000 rpm Power (max.):10,5 kW Torque (max.):90 Nm Taper:HSK-A63 Swivelrange in B:+/- 120° In general: Toolmagazine:Chainmagazine, 60 Stations Movement in X/Y/Z:750/200/1.100 mm Rapid travers in X/Y/Z:40 m/min Equipment: Positionsensor:Direct scales in X/Y Chip disposal:Chip conveyor Coolant supply:Internal coolant with Paperbeltfilter and Highpressure, 20 bar Workpiecemeasurement:Renishaw RMP 40 Toolbreakagecontrol:Blum Z-Nano Toolmonitoring:Easy Tool Monitor Automation:Automationpackage (Automatic Door, electrical Interface Robo2Go) Emulsion mist separator:Meachanical extraction, AFS 1100 :Set-up operation. Electronic handwheel Technology cycle:Alternating speed Digital Manufacturing:IoT Connector Further Equipment:Spindlechiller, Rinsing pistol

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, turning length: 1,000 mm, turning diameter: 90 mm, spindle motor power: 40,000 W, spindle speed (max.): 4,000 rpm, torque: 190 Nm, total height: 2,550 mm, total length: 4,325 mm, total width: 2,350 mm, bar diameter (max.): 90 mm, overall weight: 14,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main and sub spindle C-axis VDI 30 turret (Turret II) Drill breakage control Nedpfx Aex T A Droa Dewb High-pressure system Cooling unit Eco-Fluid coolant lubrication system KNOLL chip conveyor Irco Breuning short bar loader

Condition: excellent (used), Year of construction: 2003, operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: A8A R19 52, turning length: 225 mm, turning diameter over cross slide: 250 mm, turning diameter: 80 mm, spindle motor power: 4,400 W, spindle speed (min.): 300 rpm, spindle speed (max.): 6,300 rpm, spindle bore: 25 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, bar diameter (max.): 25 mm, quill stroke: 50 mm, Equipment: documentation/manual, Additional info : 12-station tool turret for VDI16 quick change tools bi-directional logic for driven tools Nedpfsxvb Thox Aa Dewb

Condition: good (used), Year of construction: 2013, functionality: fully functional, spindle speed (min.): 3,000 rpm, feed length Y-axis: 500 mm, Year of manufacture: 2013 Chuck diameter: 10" Nwsdpfxex Nmuas Aa Dsb Number of axes: 3 Length: 500 mm Swing diameter: 400 mm Spindle speed (rpm): 3000 Machinable materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: used, Year of construction: 2005, revolutions per minute 8000 U/min x-travel 1000 mm y-travel 500 mm Njdpfx Aaoud Al Hs Dewb z-travel 570 mm Control Siemens weight of the machine ca. 5000 KG

Condition: good (used), Year of construction: 2001, M01.43870 frequency 50 Hz voltage 400 V 24 V connected load 48 kW rated current 63 A control Siemens 840 D turning diameter 250 mm turning length 100 mm weight of the machine ca. 7,5 t Nwodpfxorc Ip So Aa Dob turning length external / innen 100 mm workpiece length - min. 29 mm workpiece length - max. 100 mm

Condition: good (used), Year of construction: 2021, operating hours: 2,400 h, functionality: fully functional, 2-axis universal turning center with driven tools, C-axis, Y-axis, and sub-spindle Machine in extremely well-maintained condition Ergonomic DMG MORI SLIMline® panel Main spindle A2-8" with AC motor, power 17 / 25.5 kW (100/40% DC), 4,000 rpm Radial servo turret VDI 40 with 12 driven stations, Trifix® interface (DIN5480) Direct measuring system for X and Y axes Chip container Hydraulic hollow clamping cylinders, max. bar capacity Ø80 mm Sub-spindle A2-6" with ISM 52 spindle motor, power 13 / 14 kW (100/40% DC), 5,000 rpm Electronic handwheel Y-axis travel ± 60 mm DMG MORI IoTconnector Control DMG MORI SLIMline® 0i-F Plus Fanuc Touch 19" Bar package & interfaces Workpiece catcher up to Ø80 x 200 mm, max. workpiece weight 4 kg Interface for bar feeder or loader (DMG MORI standard) Chip conveyor on right side 4-color signal tower Main spindle chuck Hydraulic 3-jaw chuck D254 SMW BB-D 250 Bore passage Ø78 mm (limits bar capacity to Ø78 mm) Sub-spindle chuck Hydraulic 3-jaw chuck SMW BB-D 210 Bore passage Ø66 mm Draw tube inner diameter Ø52 mm Sub-spindle options External chuck washing Pneumatic ejector with internal coolant supply Coolant / chip removal Nodpsx Tg I Usfx Aa Dowb 12 bar high-pressure system with dual filter and manual switching Coolant spray gun 5 bar Measuring / monitoring Manual tool probe MARPOSS General options Parts conveyor front left instead of parts bin Conveyor outside working area Chuck jaw options Set of soft jaws for BB-D 210 (3 pcs per set, 3 sets) Set of soft jaws for BB-D 250 (3 pcs per set, 3 sets) Fanuc options Tool monitoring software NCGuide software for programming environment incl. MANUAL GUIDEi Technology cycle Alternating Spindle Speed Connectivity SERVICEcamera incl. accessories (antenna, charger, SD card) Special equipment / accessories Hydrafeed MSV 80 with floor rails, bar feed magazine, and modifications Swarf bin (Model 350) VDI40 holders with multiple seats D1 (2 pcs) VDI40X25/25 double-Y holder for 4x Ø25 mm (2 pcs) VDI40X25X100 25Ø boring bar holder (1 pc) Axial driven tool VDI40, ER32, 1:1, max. 6,000 rpm, external cooling (1 pc) Radial driven tool VDI40 DIN 5480 H=100 mm, ER32, 1:1, max. 6,000 rpm, external cooling (1 pc) Parting tool holder H=32 mm, VDI40, universal gearing (1 pc)

Condition: used, Year of construction: 2005, turning diameter 640 mm turning length 1.185 mm control SINUMERIK 840D swing diameter 640 mm distance of spindle heads 1500 mm slide I: X1 / Y1 / Z1 / B slide travel X-axis 550 mm slide travel Z-axis 180 mm Z- Travel 1.185 mm B - axis 240 ° feed x-axis 0 - 40.000 mm/min feed y- axis 1 - 24.000 mm/min Feed z- axis 1 - 70.000 mm/min feed B-axis 1 - 20 1/min rapid traverse X/Y/Z 40 / 24 / 70 m/min feed capacity X/Y/Z S6: 7,00/11,00/7,50 kN tool taper HSK 63 turning speed milling-spindle 10 - 12.000 1/min power capacity at 100 % load 13,20 kW power capacity at 40 % load 22,00 kW torque milling spindle 60 / 100 Nm no. of workpieces in the magazine 46 Stück tool length - max. 350 / 200 mm tool diameter 80 mm wotkpiece diameter with 2 vacant positions 120 mm weight of tools max. 6 / 10 kg slide II: X2 / Z2 slide travel X-axis 180 mm Z- Travel 1.050 mm feed x-axis 1 - 24.000 mm/min Feed z- axis 1 - 36.000 mm/min rapid traverse x + z axis 24 / 36 m/min feeding force S6: 11,00/9,00 kN turret (x-stations) 12 tool taper DIN 69880 Ø40 Nodpsydflljfx Aa Dswb Driven tools - quantity 12 Driven tool turning speed 1 - 4.000 1/min power capacity at 100 % load 10,70 kW torque S1: 32 Nm Slide III - longitudial travel Z3 mm Z- Travel 1.150 mm Feed z- axis 1 - 36.000 mm/min rapid traverse Z-axis 36,00 m/min feed capacity Z - axes S6: 13,00 Nm Main spindle ISM90 turning speed main-spindle 10 - 4.000 1/min power capacity at 100 % load 36,00 kW power capacity at 40 % load 45,00 kW max. torque at 40% / 100% load 800 / 630 Nm spindle bore 80 mm turning speed opposed-spindle 10 - 5.000 1/min power capacity at 100 % load 21,00 kW power capacity at 40 % load 28,00 KW max. torque at 40% / 100% load 320 / 240 Nm spindle bore 80 mm total power requirement 70,00 kW weight of the machine ca. 20,00 t dimensions of the machine ca. 8,50 x 4,50 x H3,10 m Machine with SIEMENS SINUMERIK 840D control, main- and counter-spindle, chip conveyor, dust exhauster, DMG-automation WH10top. Main-spindle ISM90: hollow clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter-spindle ISM76: closed center clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-up device with integrated conveyor belt, automatic protective cover, differential pressure clamps. Incl. pump-frame for coolant - Pump 1: 17 l/min at 80bar - Pump 2: 20 l/min at 8bar - Pump 3: 40 l/min at 20bar Without coolant unit. Was connected to a central coolant-system. Accessories: Hainbuch collet chuck incl. collets Ø30,45,50,55,60,65,72,82,85,90 1 piece workpiece pick-up-gripper for turret

Condition: like new (used), Year of construction: 2019, We are selling a 5-axis CNC woodworking machining center manufactured in 2019, equipped with a versatile FLEX5 cutting unit with a rotation range of 0-360° and a tilt angle of 0-90°. It is equipped with an 8-slot tool changer and a C-axis on the main spindle, which increases its accuracy and flexibility. It handles cross-sections from 20 x 50 mm to 200 x 455 mm and supports wood lengths up to 13,300 mm. Nwjdpfx Aexalnwja Djb

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, workpiece height (max.): 400 mm, spindle speed (min.): 1,000 rpm, spindle speed (max.): 36,000 rpm, Perfect for: Highly efficient 3D milling of small workpieces – precise milling with high output Materials: Plastics, composites such as CFRP/GFRP, model building materials, aluminum Industries: Automotive, aerospace, transportation & logistics, leisure industry, sanitary, boat building, automation _____ Reference number: 1218 Availability: March 2026 Model: 5-axis CNC milling system RT-F 1400 Spindle data: 8 kW / 6.4 Nm; 1,000–36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 40/40/30 Workpiece dimensions X/Y/Z: 1000 x 800 x 400 mm Nwjdpfxexdwnds Aa Dob Control: SIEMENS – Sinumerik One with HT 2 Tool changer: 12 tools Tables: 1 rotary table Tool breakage and length control: Renishaw TS 27 R Other features: Chip tray, anti-slip perforated tread plate Year of manufacture: 2026 Condition: new

Condition: new, Year of construction: 2026, rotational speed (max.): 36,000 rpm, Perfect for: Highly efficient 3D milling of small workpieces – precise machining with high output Materials: Plastics, composites such as CFRP/GFRP, model-making materials, aluminum Industries: Automotive, aerospace, transport & logistics, leisure industry, sanitary engineering, boatbuilding, automation _____ Reference number: 1221 Availability: April 2026 Model: 5-axis CNC milling machine G-S-F/B (25-10) Spindle data: 8 kW / 6.4 Nm; 1,000-36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 80/80/60 Workpiece dimensions X/Y/Z: 2,500 x 1,000 x 600 Control: FANUC Tool changer: 13 tools Tables: 1 rotary table Vacuum system: yes Nedpfex S E Nbox Aa Dswb Tool breakage and length control: Renishaw TS 27 R Miscellaneous: on request Year of manufacture: 2026 Condition: new