Used Collet Chucks for sale (4,152)

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Iaedpsyaaavsfx Adwsl Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Condition: like new (used), Year of construction: 2022, functionality: limited functionality, grinding length: 450 mm, grinding width: 150 mm, table length: 450 mm, table load: 120 kg, table width: 150 mm, grinding spindle speed: 3,000 rpm, Surface Grinding Machine from Showroom (new) Manufacturer: Okamoto Model: ACC-450 AV (open design) Year of manufacture: 2022 Control: Okamoto FX Operating hours: 0 S/N: XXXX Technical specifications: ----- • Table size: 450x150 mm • Table travel longitudinal/cross: 530x165 mm • Max. table load: 120 kg • Max. grinding height table / new wheel: 397.5 mm • Standard magnetic chuck: 450x150 mm (P=13mm) • Automatic infeed: 0.0001–0.030 mm • Manual micro feed: 0.0001 / 0.001 / 0.01 mm • Spark-out strokes: 0–5 • Rapid traverse: 600 mm/min • Grinding wheel: 205 x 6–19 x 31.75 mm • Speed: 3,000 rpm • Grinding spindle motor: 1.5 kW • Connected load: 7 kVA • Dimensions: 2,000 x 1,430 x 2,265 mm • Machine weight: 1,250 kg Accessories: ----- • Grinding wheel on flange (new) • Paper band filter with 160 l tank • Table dresser + diamond • Work light • Tool kit Ijdpfx Asx U Dawjdwjal • Operating manuals

Condition: used, Automatic lathe, turning machine with copy attachment UMA Type F1 NK 60 Copy lathe for chuck parts Machine no. 28-0031 Year of manufacture: 1971 Maximum turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm, 4 steps Ijdpfx Adjib D H Rowsal Main motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gearbox steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying unit SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system mounted below the machine bed - Hydraulic unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight automatic lathe: 2400 kg Weight hydraulic unit: 400 kg Total weight with pallet: 3000 kg In good condition

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Iaedpfx Ajxnlflsdwsl Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: used, Year of construction: 2010, Make RASOMA Model DZS 250-2 Year of Build 01.2010 Technical Details: Control SIEMENS SINUMERIK 840D Spindle Speed 3.500 rpm Turning diameter 260 mm Turning lenght 400 mm Tool Capacity 12 x Tailstock No Technical Details: Control CNC » SIEMENS » SINUMERIK 840D Spindle Speed 3.500 rpm Isdpfokyth Isx Adwsal Turning diameter 260 mm Turning lenght 400 mm Tool Capacity 12 x Tailstock No Chuck diameter max. 260 mm Sled path X (per sled) approx. 900 mm Slide path Z 400 mm Turning spindle unit Spindle head A 6 (DIN 55026) Diameter in the front bearing 120 mm Spindle bore 38.1 mm Main drive Motorized insertion spindle with AC built-in motor, water-cooled, infinitely variable lubrication Lifetime grease drive power at 100% ED 28.3 kW at 40% ED 36 kW Speed ​​range 3500 rpm Torque on the turning spindle max. at 100% ED 300 Nm Feed drive X-axis via linear motor 1FN3 Rapid traverse speed 100 m/min Feed force 6915 N Z-axis via 1FT6 AC servomotors Rapid traverse speed 30 m/min Ball screw diameter 40 mm Feed force » 8 kN Tool system Disk turret tool holder mount VDI 40 tool positions 12 tool disk SW 320 position measuring system X-axis incremental linear length measuring system LC 183 Compressed air connection 6 bar Dimensions Length 5.276 mm Width 2.400 mm Height 3.310 mm

Condition: new, Machine according to DIN 8605: lathe with increased accuracy. Tip width: 700 mm Peak height: 170 mm Circulating diameter over bed: 340 mm Circulating diameter over flat slide: 190 mm Bed width: 260 mm Laengs schlitten: 600 mm Shifting path cross slide: 220 mm Shifting path upper slide: 110 mm Flat slide: 410 mm Flat slide width: 150 mm Guide load-length bed slide: 380 mm Rotary chisel cross-section: 20x20 mm Center of rotation distance - Upper slide: 34 mm Swing range upper slide (Support): 60/120° Main spindle: Spindle connection DIN 55029 (Camlock): S 5 Spindle bore: 50 mm Inner cone according to DIN 7178: 1:22 Spindle diameter in the front bearing: dia. 70 mm Iaedpfodctnbox Adwel Max chuck diameter: 200 mm Max. washer diameter: 200 mm Spindle speeds: 40-3000 rpm Speed control: Stepless mechanical speed levels: 4 Main drive: Power at 40% ED: 5.3 kW Max rated torque a. d.Main spindle: 640 Nm Feed: 20 (28) Laengsvorschuebe Z: 0.045-0.787 mm/U 20 (28) Plan vorschuebe X: 0.023-0.406 mm/U Thread: 20 (28) metric thread (basic): 0.4 - 7.0 mm 32 inch thread (with option Raed replacement D3Z200): 56 - 4 Gg/inch 28 Module thread (with option Raed replacement D3Z200): 0.2 - 3.5 32 diam. Pitch thread (with option Raed replacement D3Z200): 112 - 8 Tailstock: Pinole diameter: 50 mm Indoor cone of the pinole: MK 3 Pinole stroke: 120 mm Side adjustment: x 13 mm Zulessige Werkstueckweights

Condition: used, Year of construction: 2001, functionality: fully functional, Control: GE FANUC Series 18i-T Travel range X-axis: 570 mm Working stroke X-axis: 250 mm Iaodpfx Aeyaaaijdwel Travel range Z-axis: 200 mm Swivel diameter: 260 mm Max. turning diameter: 220 mm Max. workpiece length: 100 mm FORKARDT 3QLC 250-72 Z8 S12 power chuck Max. spindle speed: 4,500 rpm Main drive power, 100/40% duty cycle: 15/22 kW Torque 100/40% duty cycle: 202/303 Nm Rapid traverse speed in X: 60 m/min Rapid traverse speed in Z: 30 m/min Standard automation with 12 - 18 pallets Tool carrier with driven tools, 12 stations Max. speed of driven tools: 6,000 rpm Includes various driven tools and chip conveyor Dimensions without chip conveyor (LxWxH), approx.: 2,720 x 1,500 x 2,400 mm Weight approx.: 6,500 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Swing dia over bed 500 mm Swing dia over cross slide 270 mm Swing dia in bridge 700 mm Length of bridge 357 mm Center high 250 mm Center distance 1000 mm Width of bed 340 mm Max weigth of wpc. 300 kgs Spindle speed 22 – 2000 rpm Spindle hole D53 mm Spindle power 5,5 kW Weight ca.1950 kgs Dimensions LxWxH = 2550 x 1100 x 1500 mm Accessories and features - 3 axis D.R.O. - Chuck protection - 3 jaws chuck D250 mm - 4 jaws chuck D300 mm - Tool holder protection - Stopper for long. slide Iaodpfswwt I Nex Adwsl - Steady rest - Travelling rest - Center - Reduction adapter for main spindle - Tailstock - Coolant unit - 4-fold toolholder - Machine lamp - Rapid speed on long, and cross slides - CE marking - Manuals

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 center distance 1500 mm nominal turning diameter over bed Ø 500 mm turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine weight 2500 kg Iasdpfjlzm Eqsx Adwol

Year of construction: 2009, condition: ready for operation (used), Main Drive Number of axis 5 Spindle Speed 3000 RPM Spindle motor power 5.5 kW Movement Y-Axis Movement 60 mm This 5-axis MORI SEIKI NL3000Y/1250 was manufactured in 2009. It features a MSX-850 control unit, a 300mm chuck, and a 10-station turret. Capable of a max spindle speed of 3,000 rpm and a rotary tool speed of 6,000 rpm, it's ideal for complex turning tasks. Additional features include a Y-axis movement of +/-60mm and a fully programmable NC tailstock. Contact us for further details regarding this machine. Isdpfox Sz Dbsx Adwsal Application Types Turning

Condition: used, RÖHM 3-Jaw Chuck, Used Type DURO-T315 Ijdpfx Adswm D Rtowoal - without jaws -

Condition: used, Year of construction: 2001, functionality: fully functional, Control: GE FANUC Series 18i-T Travel range X-axis: 570 mm Ijdpfxoyaaaco Adwsal Working stroke X-axis: 250 mm Travel range Z-axis: 200 mm Swivel diameter: 260 mm Max. turning diameter: 220 mm Max. workpiece length: 100 mm FORCARDT 3QLC 250-72 Z8 S12 power chuck Max. spindle speed: 4,500 rpm Main drive power, 100/40% duty cycle: 15/22 kW Torque 100/40% duty cycle: 202/303 Nm Rapid traverse speed in X: 60 m/min Rapid traverse speed in Z: 30 m/min Standard automation with 12 - 18 pallets Tool carrier with driven tools, 12 stations Max. speed of driven tools: 6,000 rpm Includes various driven tools and chip conveyor Dimensions without chip conveyor (LxWxH), approx.: 2,720 x 1,500 x 2,400 mm Weight approx.: 6,500 kg

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm Iaedpfeh Hvk Asx Adwjl turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: ready for operation (used), Year of construction: 1998, spindle speed (max.): 4,000 rpm, spindle motor power: 18,500 W, overall weight: 5,000 kg, controller manufacturer: MAZATROL, controller model: T Plus, This Mazak SQT 250M was manufactured in 1998. It is a horizontal turning machine, ideal for precision machining tasks. Contact us for more information about this machine. Additional equipment • Parts Catcher and Parts Counter Machine Benefits Technical Machine Benefits • Rapid feedrates: 30 m/min • Chuck size: 250 mm kitagawa chuck b-210a615 • Bar capacity: 64 mm • Features: complete with standard and live tooling • C axis & milling, c axis: 0. 001° Extra Information Machine still under power Isdpfx Adeyaix Iswjal

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) Iasdpfx Ajw Uf Hwsdwel - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: ready for operation (used), Year of construction: 2015, total height: 2,100 mm, overall weight: 8,600 kg, controller manufacturer: SIEMENS, controller model: Siemens 828D ShopTurn Touchscreen Control, number of axes: 2, This XYZ XL780 was manufactured in 2015. A robust horizontal turning machine featuring a Siemens 828D ShopTurn control, it offers a swing over bed of 780mm and a maximum cutting length of 2,900mm. The spindle supports a 160mm diameter with speeds up to 1300 rpm. Includes a 3-jaw manual chuck and multiple steady rests. If you are looking to get high-quality turning capabilities consider the XYZ XL780 machine we have for sale. Contact us for more information. Additional equipment • Various Chuck Sizes depending on Machine • Air Assist ‘Floating’ Tailstock with Towing Hitch • Joystick Control for Rapid Movement • Coolant // Worklight • Automatic Lubrication • Electromagnetic Spindle Brake • Chuck Guard (Interlocked) // Swarf Guard (Interlocked) • Dead Centres and Sleeves • Networking // USB Port • Compact Flash Card Slot Iaedpfxjyaixuj Adwjl Machine Benefits Technical Machine Benefits • Power requirements: 54a • Air requirements: 6 bar • Cross slide travel: 430 mm • Distance between centres: 3000 mm • Swing in gap: 1090 mm • Swing in gap: 1090 mm • Maximum cutting length: 2900 mm • Bed width: 50 mm • Bed width: 50 mm • 4 station auto indexing toolpost Extra Information Accessories 3-jaw manual chuck, Ø 500 (capacity Ø 730) 3 Adjustable Steady Rests (Ø 250, 400, and 540) 2 Sets of Hard Jaws for Internal/External Grip on Plate 1 Set of Hard Jaws for Single-Piece External Grip 4 Sets of Soft Jaws for Plate 1 Cm6 Live Center, Röhm Brand Dimensions Machine Depth 5400 mm

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Ijdpfx Adsrtd Uwjwsal Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 1,800 rpm, spindle motor power: 37,000 W, total height: 2,500 mm, overall weight: 21,000 kg, controller manufacturer: FANUC, controller model: oi-TC, number of axes: 2, This SMTCL HTC 63300 was manufactured in 2007. A robust horizontal turning machine featuring a swing diameter over bed of 810 mm and over saddle of 580 mm. It includes a 500 mm chuck, a spindle speed range of 50 - 1800 rpm, and an auto turret with 12 tool positions. Ideal for handling large workpieces with its 3000 mm distance between centers. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Distance between centers: 3000 mm • Spindle nose: asa 11” a2 • Chuck size: 500 mm • Bar capacity: 125 mm • Type: auto turret with 12 tool positions (32 mm tools) Iaedpfx Aoyaiq Redwol • Tailstock travel: 120 mm Extra Information Machine still under power Dimensions Machine Depth 6390 mm

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 4,200 rpm, spindle motor power: 22,000 W, overall weight: 6,200 kg, controller manufacturer: OKUMA, controller model: OSP P200-L, number of axes: 2, This 4-axis Okuma LB 3000 MY was manufactured in 2008. It features a 12-position turret with all driven tools, C-axis and Y-axis functionality, and a main spindle motor of 22 kW. The machine includes a hydraulic and programmable tailstock, a chuck size of 250 mm, and a bar capacity of 75 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 MY machine we have for sale. Contact us for more information. Additional equipment • Spindle oil chiller included • Side chip conveyor (hinged belt type) • Double foot pedal for chuck and tailstock control • Includes transformer, manuals, parts list, and schematics Machine Benefits Iedpfx Ajyaiq Dsdwoal Technical Machine Benefits • Torque: 620 nm • Spindle nose: a2-8 • Bar capacity: 75 mm • Chuck: 250 mm smw autoblok with quick jaw change • Swing diameter: 520 mm • Max turning diameter: 380 mm • Max turning length: 1050 mm • 12-position turret, all driven tools • Turret indexing time: 0. 2 seconds • Equipped with static and driven tool holders Extra Information Tools Automatic tool load monitoring Renishaw automatic tool measurement arm Driven tools motor: 5.5 kW Driven tool speed: up to 4000 rpm Currently in operation

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 4,200 rpm, spindle motor power: 22,000 W, controller manufacturer: OKUMA, controller model: OSP-P200L, number of axes: 3, This 3-axis Okuma LU 300 MY was manufactured in 2006. It features a robust 22 kW spindle motor, dual turrets with live tooling, and a bar capacity of 75 mm. The machine offers a maximum turning diameter of 380 mm and a length of 1050 mm. It includes a programmable hydraulic tailstock, C-axis, Y-axis, and an OSP P200-L control for enhanced precision. If you are looking to get high-quality turning capabilities, consider the Okuma LU 300 MY machine we have for sale. Contact us for more information. Additional equipment • Renishaw tool probe • USB, PCMCIA, and RS232 ports • Chip conveyor (hinged belt type) • Tool load monitoring and effort control • Dual pedal for chuck and tailstock operation • Fully equipped with static and live toolholders Machine Benefits Technical Machine Benefits • Torque (main spindle): 620 nm • Spindle nose: a2-8 • Bar capacity: 75 mm • Chuck size: 250 mm (smw autoblok, quick jaw change) • Live tool speed: 4000 rpm • Live tool motor: 5. 5 kw • C-axis and y-axis: yes • Guideways: box-type (prismatic) on all axes • (upper turret with 12 live stations; lower turret with 8 positions) • Table indexing time (turret): 0. 2 seconds Extra Information Workpiece Max Turning Diameter: 380 mm Ijdpfx Adsyaiqwsweal Max Swing Diameter: 520 mm Max Turning Length: 1050 mm

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 4,000 rpm, spindle motor power: 18,000 W, overall weight: 5,800 kg, controller manufacturer: FANUC, number of axes: 5, This 5-axis MORI SEIKI NL 2500 SY was manufactured in 2007, featuring a sub-spindle and a 12-station motorized turret. It includes main and sub-chucks of 250 mm and 210 mm, respectively, and a bar capacity of 80 mm. The machine offers a spindle speed of 4,000 rpm and a tool speed of 6,000 rpm. Consider the opportunity to buy this MORI SEIKI NL 2500 SY horizontal machine centre. Contact us for more information about this machine. Additional equipment • Renishaw tool measurement arms (2) • Communication: USB, PCMCIA, RS-232 • Bar feeder interface • Automatic parts catcher • Independent chuck pedals • Chip extractor: hinged lateral Machine Benefits Technical Machine Benefits • Sub-spindle motor: 15 kw • Tool motor: 5. 5 kw (torque 640 nm) • Tool speed: 6000 rpm • Turret index: 0. 2 sec • 12-station motorized turret • Oil cooler: daikin Iasdpfx Aoyaiqkodwjl • C-axis: both spindles Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2014, spindle motor power: 22,000 W, spindle speed (max.): 8,000 rpm, controller manufacturer: FANUC, controller model: 0i-TD, number of axes: 4, This 4-axis Miyano GN-3200W was manufactured in 2014, featuring twin spindles for efficient left and right operations. It handles a maximum turning diameter of 40 mm and a machining length of 50 mm. Equipped with two horizontal linear turrets and a spindle speed range up to 8,000 rpm, it's ideal for precise small-scale turning tasks. Consider the opportunity to buy this Miyano GN-3200W swiss type turning machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Maximum turning diameter: 35 mm (with stationary collet), up to 40 mm (with pull-type collet) • Maximum machining length: 50 mm • Tool shank size: 10 mm, 12 mm, and 16 mm • Drill shank diameter: 20 mm Extra Information Machine still under power Isdpfjyaiqdjx Adweal

Condition: ready for operation (used), Year of construction: 2010, spindle motor power: 3,700 W, spindle speed (max.): 8,000 rpm, overall weight: 1,350 kg, total height: 1,000 mm, number of axes: 6, This 6-axis Miyano BX-26S was manufactured in 2010, featuring a maximum blank diameter of Ø26 mm and a maximum working length of 330 mm. It includes a dual-spindle setup with rotation speeds up to 8000 rpm and a linear turret with 18 total tools. The machine is equipped with a FANUC 18i-TB control system, supporting 6 controlled axes and 4-axis simultaneous interpolation. If you are looking to get high-quality turning capabilities consider the Miyano BX-26S machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Maximum blank diameter: Ø26 mm (Ø20 mm for bx-20s) • Maximum working length: 330 mm • Bed type: flat Extra Information Turret Turret Type: Linear Total Number of Tools: 18 Iodpfsyaip Tex Adwsal Rotating Tools (Slide 1 / Slide 2): 6 / 4 Flat Tools (Slide 1 / Slide 2): 4 / 4 Tool Size: Slide No.1: Ø16 mm Slide No.2: Ø16 mm Tapping Capacity (L-SP / SP): M8 Drilling Capacity (L-SP): Ø12 mm Injection Unit Chuck Sleeve Type: AR-16 Chuck Sleeve: AR-16 Clamping Force Thrust Force (Z1 / Z2 L-SP and R-SP): 3325 N Other Axes: 1847 N Movement Slide No.1 Travels: X1: 135 mm Y1: 260 mm Z1: 70 mm Slide No.2 Travels: X2: 215 mm Y2: 75 mm Z2: 180 mm Media Tank Capacities: Hydraulic: 10 L Coolant: 140 L Electrical Specifications: Power Supply Capacity: 20 KVA Voltage: AC200/220V Frequency: 50/60 Hz Required Air Pressure: 0.5 MPa Fuse Capacity: 40 A Control Unit Numerical Control (NC) System: FANUC 18i-TB Controlled Axes: 6 axes (X1, Z1, Y1, C1, X2, Z2, Y2, C2) Simultaneous Interpolation: 4 axes Commands: G00, G01, G02/G03, G32, G04, G98/G99 Special Functions: Tool compensation, repetitive cycles, macro programming, backlash compensation Display: 9.5" CRT Operation Panel: Flat keyboard Input/Output: RS-232-C Electric Motors: Spindles (L-SP / R-SP): 3.7 / 2.2 kW Slides (X1, Y1, Z1, Y2, X2, Z2): 0.5 – 0.75 kW Rotating Tool: 0.5 kW Hydraulic Motor: 0.75 kW Coolant Pump: 0.2 kW High-Pressure Coolant Pump: 0.821 / 1.349 kW Dimensions Machine Depth 2140 mm

Condition: ready for operation (used), Year of construction: 1990, operating hours: 51,392 h, total height: 1,700 mm, overall weight: 1,300 kg, This Weiler E30 was manufactured in 1990. A robust horizontal turning machine featuring a spindle bore of 42mm and a swing diameter over bed of 330mm. It supports a wide range of thread cutting, from metric to DP thread, and includes a Multifix holder B. Ideal for detailed and versatile turning operations. Contact us for more information about this machine. Additional equipment • Multifix holder B mounted • Fixed steady rest (option) clamping range: 15-100 mm • Moving steady rest (option) clamping range: 10-85 mm • Collets ranging from 3- mm (increments of 0.5 mm) • Tailstock with an MK3 chuck Machine Benefits Technical Machine Benefits • Drive power 100% / 60% ed: 9/11 kw • Max. Torque on the turning spindle: 180 nm • Total speed range: 1-4500 min⁻¹ • Feed drive: three-phase ac feed drives • Feed range longitudinal: 0-20 mm/rev • Ellganggeschwindghell longitudinal/plan: 10/7. 5/5/3. 5 m/min • Quill diameter: 50 mm • Quill stroke: 110 mm • Inner taper of quill: mk 3 Extra Information Swing diameter over facing slide: 160 mm Bed width: 240 mm Sliding movement of the facing slide: 180 mm Bed slide guide length: 395 mm Iaedpjyaimfjfx Adwel Turning tool cross-section (height/width): 20 x 20 mm Spindle head according to DIN 55027 Gr. 5 Spindle diameter in the front bearing: 70 mm Inner taper of the main spindle: Mk 5 Workpiece Metric thread range: 0.1 - 400 mm Inch thread range: G/1" 1/4 - 56 Module thread range: mm DP thread range: 1-224 G/" Number of threads max.: 50 Dimensions Machine Depth 1800 mm

Condition: ready for operation (used), Year of construction: 2000, total height: 2,050 mm, overall weight: 4,000 kg, controller manufacturer: INDEX, controller model: C200-4 / C200-8, This 5-axis Index G200 C turn-mill centre was manufactured in 2000. Consider the opportunity to buy this Index G200 C turn-mill centre. Contact us for more information. Additional equipment • Synchronous device for counter spindle machining • Tool carrier 3 for synchronous spindle (rear end machining) • Additional milling spindle • Thread milling and polygon turning device • Gripperless tool changer (6 tools, HKS-50 B, KM40) • Workpiece handling WHU100 Machine Benefits Technical Machine Benefits • Space requirement (without material guide): 3580 x 3108 mm • Control unit: resolution: 0. 001 mm (input/output/correction) • Comprehensive movement range with multiple axes configuration Iaedpfsyailzox Adwsl • High precision with 0. 001 mm resolution in numerical control • Versatile expansion stages and additional equipment for enhanced functionality Extra Information Movement Cross slide 1 (top) - XYZB axes: X-axis: Slide path 155 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Y-axis: Slide travel 120 mm, feed force 10000 N, rapid traverse 7.5 m/min, resolution 0.0005 mm Z-axis: Slide path 590 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm B-axis (rotating): 360° swivel range, angular steps 5° (with locking), resolution 0.001° (with clamping), switching time for 180°: 1 s Cross slide 2 (bottom) - XZ axes: X-axis: Slide travel 105 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Z-axis: Slide path 307 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm Turret Turret right: X-axis: Slide path 120 mm Z-axis: Slide travel 400 mm Tail Stock Center distance: 400 mm Pressure force (max): 5500 N Drive: Hydraulic or electric Media Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Delivery rate: 18 l/min System pressure: 90 bar Filling capacity: 70 liters Cooling lubricant system: Pump capacity (switchable): 20 l/min at 18 bar / 50 l/min at 3 bar / 60 l/min at 5-7 bar Filling quantity: Approx. 230 liters Chip conveyor: Hinged belt or scraper Workpiece holder: Main spindle: DB5 internal mount / D140 external mount, optional short taper Counter spindle: D140 external mount (only tensile clamping permitted for collet and chuck clamping) 1st spindle data (main/counter spindle): Spindle clearance (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm Spindle Ø in front bearing: 75 mm (with 30 mm clearance) / 85 mm (42 mm) / 100 mm (60+65 mm) Speed (max): 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Chip diameter (workpiece Ø): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine Depth 3580 mm