Used Common Rail Injectors for sale (9,300)

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 220 V, oil tank capacity: 5 l, machine/vehicle number: GDI-6000, Equipment: CE marking, It features a specially designed ergonomic structure. (The cabinet section also serves as a cargo carrying box.) Aluminum body, test rail, and bottle holder; flexible, custom test tubes resistant to hot and cold weather conditions, 6X150 (mg). From 1 injector to 6 injectors, with easy-to-connect fittings, injectors can be connected in a short time. Thanks to the injector drip reservoir, you can perform detailed spray pattern detection. Each test lasts a maximum of 90 seconds. With a 200 bar system (Electronic Measurement) specially designed for the GDI-6000, pressures are measured clearly. The GDI-6000 reaches a maximum of 200 bar. Thanks to this pressure, drip tests can be observed very clearly. With the ability to print receipts, you can provide test results to service centers and organizations that require them. Thanks to the DATABASE, the (mg) values that more than 6000 different types of injectors should deliver can be seen on the 7.0-inch touch screen. Thanks to the NEW-ENJ+ MODE, you can create and save injectors and injection parameters that are not found in the DATABASE. Thanks to the OHM-TEST MODE, you can measure the injector (OHM test) values. AUTO-1: Low speed (4000 RPM) AUTO-2: Medium speed (5000 RPM) AUTO-3: High speed (7000 RPM) Ndedpfx Aksz D H Dfomoc DRIP TEST: Thanks to the Leaking Out mode, you can perform injector drip (leakage) tests clearly under pressure. Thanks to the MANUAL MODE, you can perform the desired RPM, PULSE, and TIMER tests with the RPM+ PULSE+ and TIMER+ settings.

Year of construction: 2026, condition: new, functionality: fully functional, usable tank capacity: 5 l, machine/vehicle number: GDI-ECO, Equipment: CE marking, TECHNOMAKS GDI-6000 The TECHNOMAKS GDI-6000 is a high-pressure injector test and cleaning device developed for performing testing, analysis, and professional cleaning operations on injectors used in gasoline direct injection systems. Thanks to its specially designed ergonomic body, aluminum test rail, and durable test chamber, it is suitable for professional service use. The device features 6 special test tubes, each with a capacity of 150 mg, that are resistant to different temperature conditions and have a flexible structure. With the GDI-6000, 1 to 6 injectors can be tested simultaneously. Thanks to its practical connection accessories, injectors can be quickly connected to the system. The special drip and spray observation chamber allows for detailed control of the injector's spray pattern, direction, and leakage. Each test operation can be completed within a maximum of 90 seconds. The device's specially developed electronic pressure measurement system can reach a maximum working pressure of 200 bar. Thanks to tests performed under high pressure, dripping and leakage problems in injectors can be observed more clearly. The integrated printer allows test results to be printed and presented to the customer or relevant organization. 6000+ INJECTOR DATABASE The GDI-6000 has a large database containing reference test values for more than 6000 injectors. The fuel quantity values that the injector should deliver can be viewed on the 7-inch touchscreen. NEW-ENJ+ MODE For injectors not found in the database, the user can create their own test parameters and save new injector information to the system. OHM TEST MODE Allows for the control of the electrical resistance values of the injectors. Thus, the OHM values of the injector coils can be measured during the test. AUTOMATIC TEST MODES AUTO-1: 4000 RPM low-speed test Nedpez D S Ezsfx Akmsdc AUTO-2: 5000 RPM medium-speed test AUTO-3: 7000 RPM high-speed test By simulating different engine speeds, it enables the comparison of the fuel quantity and spray performance of injectors under various operating conditions. DRIP / LEAKAGE TEST Thanks to the Leaking Out mode, injectors are checked under high pressure. Leakage, dripping, and pressure loss problems in the injector nozzle can be observed. MANUAL TEST MODE RPM, PULSE, and TIMER values can be adjusted manually by the user. Thus, special test scenarios can be created using the desired speed, triggering time, and test time. PROFESSIONAL CLEANING MODES CLEANING 1: Performs pressurized cleaning by operating the injectors at different speeds between 1000–7000 RPM. CLEANING 2: Increases the open time of the injectors, allowing for more intense pressurized cleaning to be applied to the fuel passage channels and injector nozzles. REVERSE FLUSHING: Using special reverse connection accessories, liquid is applied to the injector in the opposite direction. This method ensures that the injector shaft, nozzle, and internal fuel channels are professionally cleaned. ULTRASONIC CLEANING MODE: During the ultrasonic cleaning process, the injectors can be operated in a controlled manner in the 1000–7000 RPM range. In this way, the mechanical operation and ultrasonic cleaning can be performed simultaneously.

Condition: used, Injector Gunther Type: PI 26 Number of needles: 26 Nodew Ra Rpopfx Akmedc Needle diameter: 4 mm Max. product width: 340 mm Cycles per minute: 15 to 55 cycles/min Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0.5 to 4.0 bar Electric power: 3 kW Voltage: 400 V Current: 16 A Machine dimensions (cm): Width: 70 Length: 170 Height: 200

Condition: used, Injector Inject Star Type: PI 36 Njdpfxjkqyhnj Akmjdc Number of needles: 36 Needle diameter: 4 mm Passage mechanism type: Gear rack rail Electric power: 3kW Machine dimension in cm: 50x160x200cm

Condition: like new (used), Year of construction: 2017, load capacity: 1,000 kg, lifting height: 7,150 mm, construction height: 2,920 mm, operating hours: 204 h, fuel type: electric, mast type: triplex, Manufacturer + model: STILL EK-X 24 Mast: 3F7150 ID: 26112.5012 Category: Used Mast: 3F Lowered height: 2920 mm Lifting height: 7150 mm Nedez Tdzbopfx Akmjdc Capacity: 1000 kg Platform height: 6600 mm Picking height: 8200 mm Initialized: Yes Year: 2017 Hours: 204 hours Capacity: 24V / 1240Ah Options: FULL options!! - Triplex mast - FFL - Adjustable forks!! - Special SAFETY gates!! - Side guide / Rail guidance - (including end-of-travel braking under the battery) Truck width = 1480 mm Cabin width = 1400 mm Complete, LIKE NEW!!

Condition: good (used), The ALFRA PSG 5+ profile rail cutting device was manufactured in 2015 and is equipped with a hydraulic attachment. The length stop enables precise, repeatable cutting of profiles. An ALFRA 120 electro-hydraulic pump is connected to the hydraulic attachment and is included in the offer. The workbench is also part of the package. The device has been function-tested and has an electrical inspection performed by an electrical company. Ndsdpfxsz N Smdo Akmoc

Year of construction: 1974, condition: excellent (used), Cryogenic tank rail cars, gas, wagons, tank wagons, gauge, CO2, carbon dioxide, storage CO2 gas wagons, tank wagons, carbon dioxide, transportation, cryogenic tank rail cars, storage They are constructed to storage liquid CO2. Nedpfx Aohfv Ehjkmedc manufacturer: Rheinstahl AG year of manufacture: 1974 volume: 51,79 m3 pressure: 20 bar test pressure: 30 bar Export from EU carbon dioxide, transportation, LCO2, gas. Please contact us for more details.

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 03/2018, total length: 14,040 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5, color: white, Equipment: tail-lift, = Additional options and accessories = Nedpe Ad Nxfofx Akmedc - Rear doors - SAF axles = Notes = Dhollandia DHSMR.20 tail lift, 2000 kg Lashing rails Rear doors Tridec steering = Further information = General information Model year: 2026 Registration number: OR-24-GN Axle configuration Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire size: 385/65 R22.5; Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 2: Tire size: 385/65 R22.5; Max. axle load: 9000 kg; Steered; Tire tread depth left: 60%; Tire tread depth right: 60% Weights Unladen weight: 8,020 kg Payload: 21,980 kg GVW: 30,000 kg Functional Tail lift: Dhollandia DHSMR.20, under-ride tail lift, 2000 kg Maintenance, history, and condition Number of owners: 2 APK (Technical Inspection): valid until 03/2027 Product safety Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Year of construction: 2014, condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Nsdpfeznruyex Akmsdc Stabau roller rails S1-RGSCH 100 / 8, load capacity / year of manufacture: 2014 / in stock & immediately available / very good condition Price per pair: €2,190.00 net / €2,606.10 gross Load capacity: 8,000 kg Load center: 1,500 mm Weight: 665 kg (complete set) Overall length: 3,000 mm Overall width: 450 mm Please see attached images for precise pocket dimensions. We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (tel. [phone number]) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telehandler sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Errors and prior sale excepted! Internal ID: 140204 = Further information = Year of manufacture: 2014 New: No Suitable for: Machines for loading and unloading Please contact Marius Herden for further information.

Year of construction: 2014, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). Stabau roller slides S1-RGSCH 100 / 8, load capacity / year of manufacture: 2014 / in stock & immediately available / very good condition Price per pair: €2,190.00 net / €2,606.10 gross Njdpeznrvdefx Akmsdc Load capacity: 8,000 kg Load center: 1,500 mm Weight: 689 kg (complete set) Overall length: 3,000 mm Overall width: 450 mm Please refer to the attached images for precise pocket dimensions. We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telescopic handler sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Errors and prior sale excepted! Internal ID: 141072 = Further information = Year of manufacture: 2014 New: No Unladen weight: 689 kg Suitable for: Machines for loading and unloading Please contact Marius Herden for further information.

Condition: used, mileage: 5,800 km, first registration: 10/1983, overall weight: 6,000 kg, color: green, gearing type: mechanical, number of seats: 1, Year of construction: 1983, Equipment: all wheel drive, trailer coupling, MB Trac 700 K Nedpfx Akoi R Ag Tomjdc Road and Rail Dual-purpose vehicle Rail guidance Coupling rod UVV 07.2012 approx. 1500 operating hours currently in daily use.

Condition: used, mileage: 8,000 km, first registration: 10/1987, fuel type: diesel, overall weight: 6,500 kg, color: orange, gearing type: semi-automatic, number of seats: 1, Year of construction: 1987, Equipment: all wheel drive, trailer coupling, MB trac 700 K, dual-purpose (road and rail) Excellent condition Company-owned vehicle Torque converter Wagon braking system, 300 tons UVV inspection valid until 07/2012 Ndjdpfoi R Ahbsx Akmjc Approximately 1780 operating hours.

Condition: good (used), Approximately 96m twin track rail system available from closed meat factory. Ndsdpfx Aksq Ii S Ejmec

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2020, suspension: air, color: white, = Additional Options and Accessories = - Rear doors - Refrigeration/freezer unit - Air suspension = Notes = Schmitz Cargobull SCB*S3B - Frigo Schmitz - Hooks/rail system/meat hanging - ATP/FRC - Pallet box Year of manufacture: 11-6-2020 WSM000005243735 Hooks/rail system/meat hanging Pallet box Hours: diesel 20,429 / Electric: 777 Box: 13.40 - 250 - 264 = Further Information = Nsdpfxjz Dfu Ne Akmsdc General Information Year of construction: 2020 Axle Configuration Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; Tire tread left: 30%; Tire tread right: 30% Rear axle 2: Max. axle load: 9000 kg; Tire tread left: 30%; Tire tread right: 30% Rear axle 3: Max. axle load: 9000 kg; Tire tread left: 30%; Tire tread right: 30% Weights Unladen weight: 9,762 kg Payload: 32,238 kg GVW: 42,000 kg Functional Cooling: 20 °C to 20 °C Body manufacturer: Schmitz Cooling engine: Diesel and electric Condition Technical condition: good Optical condition: good

Condition: used, Year of construction: 1996, total length: 200 mm, total width: 70 mm, total height: 187 mm, overall weight: 670 kg, input voltage: 380 V, input frequency: 50 Hz, Available for sale: LUTETIA injection molding machine, Type: IMPB Year of manufacture: 1996 Weight: 670 kg 380V; 50Hz; power: 6.5 kW Overall dimensions: 200 x 70 x 186 cm 4,700 EUR net price Ndjdpfjz Tfdwsx Akmoc Price negotiable.

Condition: used, 80 DIN-rail power supplies Manufacturer: Mean Well Type: DRH-120-24 Condition: Good used condition. Fully functional prior to removal. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale. Ndodpfxozu A Tae Akmsc

Condition: like new (used), Year of construction: 2022, operating hours: 11 h, functionality: fully functional, machine/vehicle number: 181070, Scope of supply for the overhead rail blast machine Blasting cabin: 100% manganese Transport system Y-rail: included Abrasive recovery hopper: included Automatic abrasive cleaning: included Automatic abrasive quantity control: included HMI: Siemens TP7 Remote access (via VPN): included Characteristics of the installed turbines Number: 2 units Drive power per turbine: 11.0 kW Speed control: included System characteristics Blasting tasks: surface finishing including cleaning, roughening, peening, derusting, descaling Workpiece designation: Various steel parts Coverage (%): depending on component Ndodpsy Avh Nofx Akmsc Capacity (parts/hour): individual Abrasive (material and size): aluminum and aluminum-zinc abrasive or steel abrasive in various sizes possible Abrasive quantity (initial fill): approx. 1000 kg Workpiece material: steel Hook load: max. 450 kg Workpiece temperature: max. 80° C Workpiece height: 1300 mm Part diameter (min/max): 1100 mm Sound pressure level without soundproofing: approx. 85 - 90 dB(A) Optional offers: Dry filter including secondary filter EUR 18,880.00 Pipework 5m EUR 1,980.00 Technical data of the filter system: Type: dry filter Air flow capacity: 2,600 m³/h Filter surface area: 36 m² Residual dust concentration: ≤ 2.0 mg/Nm³ Residual dust concentration with after-filter: ≤ 1.0 mg/Nm³ Supervision and installation starting from EUR 3,500.00 The system is delivered in CE-compliant design. Exempted are linked systems or systems where essential components are added or modified by the customer. In such cases, AGTOS provides an installation declaration. Upon request, we are happy to send you a layout plan.

Condition: like new (used), Year of construction: 2015, load capacity: 1,000 kg, lifting height: 7,700 mm, construction height: 3,050 mm, operating hours: 2,089 h, fuel type: electric, mast type: triplex, Manufacturer + model: CROWN SP 3522 - 1.0 Mast: 3F7700 ID: 23033.2653 Category: Used Mast type: 3F Lowered height: 3050 mm Lifting height: 7700 mm Capacity: 1000 kg Platform height: 7000 mm Picking height: 8600 mm Cabin width: 1370 mm Ndjdpfx Akjzut Syjmoc Year: 2015 Hours: 2089 hours Battery: 24 V / 775 Ah - Hoppecke Options: Fully equipped - Mast: Triplex FFL - Equipped with side guides & sensors (INCLUDING side rollers/wheels & sensors!!)

Condition: used, Meat Master MM-26 / BI/52 Brining Machine For sale is a professional, mobile brining injector from the premium brand Inject Star, model MM-26. This machine from the Austrian quality manufacturer Pökelmaschinen Ges.m.b.H. Vienna (Inject Star) is a classic in butcher shops, for direct marketers, and in artisanal meat processing. It is ideally suited for the precise and uniform injection of brine into pieces of meat, with or without bones. The MM-26 series, due to its more compact dimensions, is perfect for small to medium-sized butcher shops, catering suppliers, or direct marketers (e.g., farm shops). The brining machine is made entirely of robust stainless steel and is in excellent, very clean condition for its age (see detailed images). The mechanical needle system with springs and the electromechanical control are extremely robust and, in contrast to modern touchscreen controls, are hardly susceptible to costly electronic damage. Technical data: Manufacturer: Inject Star (Pökelmaschinen Ges.m.b.H. Vienna) Trade name: MM-26 / Meat Master 26 Ndjdpfxez Dtg Hj Akmec Type / Model: MM-26 / BI/52 Connection value (rated power): 2.5 kW Operating voltage: 3x 400V / 50 Hz (three-phase power) Year of manufacture: 1999 Equipment: Spring-loaded needles (automatic bone protection / needle deflection system), sturdy stainless steel articulated belt, integrated pressure regulation with manometer, mobile base with rollers, suction hose with filter basket. Safety: CE marking present, transparent splash guard at the workstation. "Everything from one source: We will gladly offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2015, load capacity: 1,000 kg, lifting height: 5,050 mm, construction height: 2,900 mm, operating hours: 3,183 h, fuel type: electric, mast type: duplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast: Z + S - 2W5050 ID: 25053.2983 Nsdszq Udvopfx Akmsdc Category: Used Mast: 2W Lowered height: 2,900 mm Lifting height: 5,050 mm Capacity: 1,000 kg Platform height: 4,250 mm Picking height: 5,850 mm Initial lift: Yes Cabin width: 1,000 mm Year: 2015 Hours: 3,183 h Battery capacity: 48 V / 465 Ah Options: - Side guidance / Rail guidance

Condition: good (used), Year of construction: 2014, operating hours: 6,884 h, load capacity: 1,300 kg, lifting height: 5,700 mm, fuel type: electric, mast type: duplex, construction height: 3,250 mm, Manufacturer + model: MAGAZINER EK 1300 Mast: 2W5700 ID: 25072.5431 Category: Used Mast: 2W Forks: 1200 mm Lowered height: 3250 mm Lifting height: 5700 mm Capacity: 1300 kg Platform height: 4150 mm Picking height: 5750 mm Initial inspection: Yes Year: 2014 Hours: 6884 hours Ndjdozuti Ejpfx Akmoc Capacity: 48 V / 930 Ah Options: VNA truck / Man-up - SAFETY doors with TILTING FUNCTION!!! - Side guidance / Rail guidance

Year of construction: 2014, condition: ready for operation (used), number of axes: 7, This 7-axis Yaskawa Motoman ES165D + rail was manufactured in 2014. It is designed for advanced automation tasks, providing flexibility and precision in various applications. If you are looking to get high-quality automation capabilities, consider the Yaskawa Motoman ES165D + rail machine we have for sale. Contact us for further details. • 7th-axis linear rail/track (external axis) Nodpfxjy T Iiye Akmsdc

Condition: used, functionality: fully functional, Year of construction: 2012, For sale: Electric Overhead Travelling Crane 10 T (AT-101, 2012) Condition: Very good, well-maintained, and technically sound. Reliable electric overhead travelling crane (Electric Hoist Type AT-101) designed for lifting and transporting heavy loads in manufacturing and storage facilities. Technical specifications: Model: Electric Hoist Type AT-101 Lifting capacity: 10 tons Lifting height: 12 m Lifting speed: 8 m/min Travel speed: 20 m/min Power supply: 380 V Duty cycle: 25% ED (short-term periodic duty) Year of manufacture: 2012 Application: Electric overhead travelling crane designed for lifting, transporting, and positioning heavy loads, equipment, or metal blanks. Suitable for use in: - manufacturing workshops, - mechanical repair shops, Nsdpfsxm Tr Dex Akmodc - warehouses and logistics centers, - metal processing lines. If you have any further questions, please do not hesitate to contact us.

Condition: used, machine/vehicle number: 008377, X axis working area: 3390 mm Y axis working area: 1570 mm Nedpfxjx Swb Ao Akmedc Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Total number of drilling spindles: 32 Total number of tool changer positions: 10

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: KA28 - 14/796737, ABUS overhead crane, crane runway, bridge crane, workshop crane, overhead travelling crane Equipped with ABUS technology Load capacity / lifting capacity 1.6 t - 1,600 kg Span 9,550 mm, external dimension approx. 9,700 mm Ndjdpfxjw Hnvte Akmec Year of manufacture 1998, floor control and scale included Crane is equipped with super fine lifting – speed 0.08–0.8 / 5 m/min Lifting height 6 m Hoist: GM816 L6-204.41.064.E Overall height from top edge of crane to hook approx. 710 mm (320 mm beam + 390 mm hoist) End carriage length without buffers approx. 150 cm Optionally, 2 x 40 m HEA240 crane rails available Crane is dismantled and immediately available Very good condition, inspection logbook available Column slewing cranes and wall-mounted slewing cranes are also available Demag KBK and ABUS HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarder possible, please inquire with zip code Collection preferred