Used Concentricity for sale (238)

Condition: used, Evaporation station for apple concentrate with a capacity of 12,000 liters juice inflow. In 2014, it was completely modernized by B&P Przeworsk, which is now Bucher Unipektyn. Nwedpfxjxn Uq Ds Airjn

Year of construction: 2005, condition: used, functionality: fully functional, Evaporation station for apple concentrate with an input juice capacity of 24,000 liters Nwsdexn Ugfepfx Airen

Condition: good (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Vacuum evaporator-concentrator for for the treatment of water-based liquids and effluents by low-temperature evaporation, forced circulation and external heat exchangers. Maximum nominal distillate production: 20,000 litres/24 h (834 l/h, ±10%). Boiler working volume: 1,540 litres. Approximate evaporation temperature: 30–60°C. Operating vacuum: 4–18 kPa absolute. Electrical supply: 400 V, three-phase, 50 Hz. Electrical power consumption: 13 kW. Rated current: 29 A. Specific electrical consumption: 16 Wh/l ±10%. Required thermal power: 593 kW. Hot-water inlet temperature: 80–90°C. Cooling-water inlet temperature: 10–30°C. Compressed-air pressure: up to 8 bar. Approximate empty weight: 2,550 kg; maximum operating weight: 4,500 kg. Approximate transport dimensions: 4,850 × 2,000 × 2,760 mm. Main construction in stainless steel. Equipped with an evaporation chamber, liquid-ring vacuum pump, circulation pump, heating heat exchanger, condenser, distillate tank and discharge pump, pneumatic valves, PLC, touchscreen and instrumentation for level, pressure, temperature and flow measurement. Maximum permissible concentrate density: 1.3 kg/dm³. Maximum viscosity: 10 cP. Maximum recommended particle size: 800 microns. Maximum inlet-liquid temperature: 70°C. Noise emission below 80 dB(A). Not suitable for flammable, explosive, radioactive or chemically incompatible liquids. Nwodpfx Aszvdfteirsn

Condition: like new (used), Set of 3 Industrial Vacuum Cookers – Stainless Steel Set of 3 industrial vacuum cookers made of stainless steel, designed for cooking, heating, and processing food products under controlled vacuum conditions. The set consists of three process vessels installed on a common frame with an elevated work platform, providing a robust solution for industrial batch production. Vacuum processing allows for cooking and concentration operations at reduced pressure, enabling operation at temperatures lower than those used in conventional atmospheric processes, depending on the product and recipe. MAIN FEATURES -Quantity: 3 vacuum cookers -Type: Industrial vacuum cooking/processing system -Application: Cooking, heating, and processing of food -Robust construction in stainless steel -3 independent process vessels -Configuration for batch production -Integrated piping and valve system -Vacuum processing -Bottom product discharge -Individual drive systems -Inspection/access hatches -Stainless steel work platform -Guardrails and access system -Designed for professional food processing environments -Integrable into complete production lines APPLICATION The system is designed to process food products in closed vessels under vacuum conditions. Working at reduced pressure allows the cooking and heat treatment conditions to be adapted to the characteristics of each product. The configuration of three vessels also provides high flexibility for managing different batches or production stages within the same facility. Depending on the product, it can be used for: Vacuum cooking Heating and heat treatment Concentration Mixing and homogenization Reduction of liquid products Sauce production Processing of fruits and vegetables Preparation of fillings and formulated products APPLICATIONS Especially suitable for food manufacturers, sauce and condiment producers, fruit and vegetable processors, prepared meal manufacturers, and industrial kitchens. Depending on its configuration, it can be used to produce sauces, jams, preserves, fruit preparations, vegetable products, fillings, concentrates, and prepared meals. The configuration of 3 industrial vacuum cookers offers a particularly interesting solution for facilities that require production flexibility and simultaneous processing of different batches. Machine available for inspection. Nedpfx Aiozwv Ipjrswn Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), functionality: fully functional, Production lines for fruit and vegetable preserves. A significant portion of the equipment is newer – from 2011 and 2014 – supplemented by older, robust machines that have proven their reliability through years of continuous operation. The machines are sold as a complete line. Line capacity (based on an example product) – approximately 1200 liter jars/hour (~1.5 tons/hour). This translates to approximately 28,800 jars/day, or ~36 tons/day. (I) What can be produced on this line: - Compotes (jars, bottles) - Jams and thick preserves - Juices (bottle filling, tube pasteurization) - Canned goods (sterilization in an autoclave) - Pasteurized preserves in jars (pickles, vegetables, sauces) (II) Process flow: Nsdpfxez Daatj Airswn 1. Product dosing – into buckets, jars (2 dosing machines) 2. Filling – bottles (filling machine), cans (dosing machine + seamer) 3. Thermal processing – boiling tank, evaporators (juice/puree concentration), tube pasteurizer (liquid product before filling) 4. Packaging closing – sealers (bottles, jars), capping machine 5. Sterilization/pasteurization of finished packaging – autoclave (cans, jars), tunnel pasteurizers (3 units) 6. Labeling – labelers for bottles, jars and cartons 7. Collective packaging – heat tunnels (shrink film), conveyors (III) Equipment list: 1. Carton labeler 2. Heat tunnel (shrink film) 3. Conveyors 4. Heat tunnel 5. Bottle labeler 6. Jar/bottle labeler 7. Heat tunnel x 3 8. Labeler (without control panel) 9. Tunnel pasteurizer x2 10. Dosing machine for buckets 11. Dosing machine + seamer for cans 12. Pleszew Autoclave (2011) 13. Tunnel pasteurizer 14. Dosing machine 15. Capping machine 16. Seamer 17. Bottle filling machine 18. Jar seamer 19. Dosing machine for jars x2 20. Tube pasteurizer 21. Evaporator x3 22. Boiling tank Total value: 2,380,000 PLN = ~ 545,000 EUR (IV) Why buy the entire line: Complete process line – from dosing to collective packaging – without the need to find missing components. Option for pickup with dismantling and transportation (to be agreed upon). Equipment used in production – documented history of use. Flexible sales options: entire line, separate technological units (e.g., canned goods section with autoclave, bottle filling section), or individual machines. Terms: Visit possible by prior arrangement. Transportation and dismantling to be agreed upon.

Condition: used, ITW Gema QCS 03 25-310 Complete Automatic Powder Coating Line, Powder coating system, Used machine Manufacturer / System: ITW Gema AG (Switzerland) & Recycolor Kft. Type / Model: GEMA QCS 03 25-310 (Powder coating booth) Year of manufacture: 2008 Serial Number: 5008-03012 (GEMA) / 16/2008 (Recycolor) Condition: Used, good industrial condition Dimensions and capacity: - Current layout footprint: 27 m x 18 m (system components can be reconfigured or modularly installed according to buyer needs) - Maximum workpiece size: 2500 x 800 mm - Conveyor line speed: High-capacity, 2 m/min - Exhaust air volume (booth): 16,000 Nm³/h - Cyclone dust collector extraction capacity: 8000 m³/h - Permissible organic powder concentration: 25 g/Nm³ (certified powder), 10 g/Nm³ (uncertified powder) - Zone 22 Main system components and technical specifications: 1. Surface Pre-treatment Tunnel (Recycolor Kft.): - Continuous multi-zone degreasing, (phosphating), and rinsing system. Nwsds Af I Hdepfx Airen - Final rinse zone: DI (demineralized) water rinse stage. - Construction: Watertight PP sheet housing with drip zones and partition plates to minimize cross-contamination. - Lower zone tanks equipped with internal filters, circulation pumps, and fitting assemblies. - Dehumidification / Exhaust: Fan extraction with droplet separator. - Control system: Fully automated PLC control. 2. ITW Gema QCS 03 25-310 Powder Coating Booth & Recovery System: - GEMA quick color-change booth with integrated overhead conveyor. - Double-sided automatic powder coating with 4+4 (total 8) spray guns with 2500 mm vertical stroke. - Pre-touch manual spraying area at the inlet for complex geometries. - Mono-cyclone powder recovery system and absolute filter with built-in exhaust fan. - Bottom cone with swing-out sieve unit for automatic or manual powder recycling. 3. Water Drying and Powder Curing Oven (Recycolor Kft.): - Fuel type: Natural gas - Main gas burner: Weishaupt WG30N/1-C/ZM-LN 3/4" W-MF (Max. output: 320 kW, supply pressure: 100 mbar) - Gas-infrared burners: INFRATEC / Honeywell CVI-r1 - VK4115V (24 units x 10 kW/unit = 240 kW total power, max. 50 mbar) - Air recirculation: 2x MA-62/1440 fans (2 x 15,000 m³/h flow rate, 2 x 7.5 kW motor power) - Design: Thermal-bridge-free sandwich panels with internal framework and "A-shape" thermal lock entry/exit to retain internal hot air. - Operating temperature range: Adjustable between 60 – 220 °C.

Condition: used, This listing is for a Thermo Scieintific Savant SPD121P SpeedVac Vacuum Concentrator. The unit is in full working condition and is ready for immediate release. The Thermo Scientific Savant SPD121P SpeedVac Vacuum Concentrator is an advanced centrifugal evaporator designed to efficiently remove solvents and concentrate samples while preserving their integrity. Here’s a closer look at its features, specifications, and applications: Key Features: PTFE-Coated Chamber: The deep aluminium chamber is coated with PTFE, offering high durability and corrosion resistance, making it ideal for handling a variety of solvents. The built-in vacuum gauge provides real-time monitoring of vacuum levels, ensuring precise control during the evaporation process. User-Friendly Time/Temperature Controls: Equipped with a membrane touch pad for easy programming, allowing users to easily set time and temperature parameters. Variable Drying Times: Drying temperatures can be adjusted from 35°C to 80°C in 5°C increments, giving users flexibility for different types of samples. Endpoint Mode: This feature automatically terminates the process when a pre-set vacuum level is reached, ensuring consistent concentration results. Glass Safety Lids: Nwjdpfx Aexxz H Tjirjn Standard glass lids improve drying efficiency by applying radiant IR heat to samples, accelerating the evaporation process. Chemical Trap Kit: Comes with disposable cartridges equipped with colour indicators to trap acids and water vapour, safeguarding the vacuum system from contamination. Tubing and Fitting Kit: Includes 4 feet of clear, thick-walled vacuum tubing, two clamps, and a cutter, making setup straightforward and allowing for immediate use. Applications: Removing Ethyl Acetate: Widely used for evaporating ethyl acetate from samples, which is crucial in applications such as CAT assays and analysing drug metabolites from solid phase extracts. Biomolecular Research: Ideal for concentrating samples in aqueous and mild organic solvents, facilitating research in biomolecular studies where precise sample preparation is necessary.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 155-110000, Year of construction: 2017, operating hours: 20,000 h, total length: 1,300 mm, total height: 2,000 mm, total width: 900 mm, overall weight: 601 kg, input voltage: 380 V, input current: 8 A, For sale: Professional industrial Stratasys Fortus 450mc FDM 3D printer in exceptionally good condition. A highly reliable and precise 3D printer, ideal for functional prototypes, jigs/fixtures, and end-use components in technical plastic materials. The machine is supplied as a complete, turnkey solution, including an SCA 3600 post-processing station, a wide range of print nozzles (tips), material canisters, and consumables. Specifications & Machine Information * Model: Stratasys Fortus 450mc * Serial number: K10456 * Software version: 6.8.7102.0 * Build volume: 406 x 355 x 406 mm * Activated material licenses: Extensive license package included: * ABS (ABS-M30, ABS-M30 Black/Blue/Custom/Grey/Red/White, ABS_ESD7, ABS_M30I) Njdpfx Aiozqz Hworown * ASA (FLUX/BLU, DGRY, GRN, LGRY, ORG, RED, WHT, YEL, BLK) * PC / PC-ABS / PC-ISO (incl. PC-ISO Translucent & PC Support) * Nylon 12 / NYL12CF (Carbon Fiber) * Antero 800NA / Antero 840CN03 * ST130 * Soluble Supports (SR30, SR35, SR100, SR110) Included equipment & accessories 1. Post-processing & Chemicals * SCA 3600 (Support Cleaning Apparatus): Washing station for easy and automatic removal of soluble support materials (SR30/SR100/SR110). * WaterWorks Concentrate P400SC: Cleaning concentrate for washing tanks. 2. Nozzles & Print Head Components (Tips) Large, assorted selection of print and support nozzles, as well as scrapers (see image): * Modeling tips: T12, T14, T16, T20, T20C * Support tips: T12SR100, T12SR30, SR30/35, U1010S1, ULTEM Support T16, etc. * Extra scraper blades/cleaners. 3. Materials & Canisters Large selection of filament spools/canisters and original boxes included (incl. ULTEM 9085, ULTEM Support, ASA, ABS-M30, PC Support, SR-110 soluble support, etc. – please note that some may be partially used or past their expiration date, but have been stored in a dry place).

Condition: good (used), Year of construction: 2000, Donau Danuflex 145 Donau Danuflex 145 high-speed radial drilling machine, year of manufacture 2000, in SUPER condition CE compliant!! Technical data: Year of manufacture: 2000 Drilling and threading capabilities Drilling capacity in steel: approx. 42 to 45 mm Threading: up to M36 Tool holder / spindle: MK 4 Spindle speed: 15 to 2,800 rpm (infinitely variable) [1, 2, 3] Travel distances & work area Outrigger travel: 1,050 mm Drilling radius: min. 540 mm / max. 1,590 mm Quill stroke: approx. 200 to 220 mm Column stroke (W-axis): approx. 450 mm Column diameter: 195 mm Table & dimensions Work table: typically approx. 1,200 x 750 mm with 5 T-slots Work table height: approx. 905 mm (ergonomic design for standing operation) Feed: automatic / stepless quill feed with electromagnetic feed clutch Equipment (standard): Threading device, hydraulic clamping for outrigger and lifting column, central lubrication and machine light Nsdpfsz Rwpyox Airswn Accessories and equipment: Several work tables About the machine: Offered is a Donau Danuflex 145 high-speed radial drilling machine. This high-speed radial drilling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Up to 3 fixed machining stations ensure maximum flexibility in the machining of workpieces, both large and small, as well as very long parts. Swivel tables allow the machining of angled bores. Large travel distances and workpiece heights up to 1500 mm are ensured. Effortless, simultaneous positioning to a drilling position in 3 axes. A self-centering spindle head positions itself precisely in centering bores. Concentric countersinking is achieved by self-centering countersinks in the bore. The guides are regularly lubricated by the central lubrication system. The Donau has been mechanically and electrically tested by us. Take the opportunity to inspect and try out the Donau on site under power. You can find more drilling machines from well-known manufacturers on our website.

Condition: good (used), Year of construction: 2003, For sale 1 CNC training/production lathe CHALLENGE Omitechnique (FAGOR): Technical Specifications (Manufacturer's Plate) - Brand / Model: Challenge Omitechnique (Original base: OTA-1640A) - Manufacturer: Buffalo Machinery Company Limited (Made in Taiwan) - Year of manufacture: March 2003 - Numerical Control (CNC): FAGOR control cabinet Nodpfx Ao Af Af Ujirewn - Power supply: 400 V / Three-phase (3Ø) / 50 Hz - Main motor power: 5.5 kW (14.6 A) - Total power: 13.4 kW (18.15 A) - Machine weight: 2,050 kg Included equipment & Configuration - Chuck: 3-jaw concentric chuck installed (Bison brand, high quality) - Turret: Quick-change tool holder (Multifix type) with its clamping handle - Tailstock: Manual, currently equipped with a drill chuck and a drill bit - Coolant system: Blue articulated hose for cutting fluid, directed towards the tool - Lighting: Integrated light bar under the upper fairing - Safety: Emergency stop buttons (on the Fagor control and the front frame), protective fairing for the work area Do not hesitate to contact me for any additional information.

Condition: ready for operation (used), A concentrate system for thickening and concentrating liquids, typically in the production of juices, concentrates or other liquids in the food industry, is available. Evaporator: horizontal, evaporator stages: 4, operating mode: live steam, heat exchange: preheating/recovery/cooling, condensation: semi-barometric milk condensation, flavor extraction: rectification/floor column. Water evaporation: 4840kg/h, inlet quantity: 6600kg/h, inlet dry matter: 12%, outlet quantity: 1760kg/h, final dry matter: 45%, aroma recovery at 150-fold concentration: 42l/h, steam consumption: 1685kg/h, specific steam consumption: 348g/kg, fresh water consumption: approx. 12700l/h. Documentation available. On-site inspection is possible. Njdpsv Sugqefx Airjwn

Condition: used, This listing is for a Eppendorf Concentrator AG The unit is in full working condition and is ready for immediate release The Eppendorf Concentrator plus is a benchtop device designed for the efficient and gentle vacuum concentration of DNA, RNA, nucleotides, proteins, and other liquid or wet samples. It features advanced heating technology and a chemical-resistant, maintenance-free PTFE diaphragm pump, eliminating the need for oil changes. The system offers versatility with a wide variety of rotor options to accommodate tubes from 0.2 mL to 50 mL, as well as microplates and PCR plates. Nwjdpsxv D D Nsfx Airjn Key Features Motorless drive and sealed chamber for trouble-free operation Whisper-quiet operation (60 dB), even with the pump on, for a pleasant working environment Automatic vacuum release prevents sample bumping or foaming Integrated brake mode for a faster rotor stop and quicker access to samples Three evaporation modes (aqueous, alcohol, and off) Four heating levels (30°C, 45°C, 60°C, and ambient) to match sample and solvent needs, reducing processing time System Options Basic System Includes the Vacufuge Concentrator and a 48 x 1.5 to 2.0 mL rotor AC receptacle for external vacuum pump connection All pump functions, including vacuum release and evaporation modes, are controlled by the concentrator

Condition: used, This listing is for a Techne Dri-Block heater with sample concentrator Nwjdpfjxzg Syex Airen

Year of construction: 2014, condition: excellent (used), Mineral Spiral Concentrator to treat pulp streams with a heavy mineral content Type K8LM5/2 Make: SWMS - South West Metallurgical Services UK Year: 2014 Condition: good, little hours Nwsdegak Hlepfx Airsn 2 Units available complete documenation available

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, wheel width: 540 mm, total length: 3,250 mm, total height: 2,350 mm, total width: 2,650 mm, type of input current: AC, workpiece weight (max.): 250 kg, helix angle: 45 °, input voltage: 220 V, workpiece length between centers: 1,000 mm, workpiece weight between centers: 250 g, workpiece diameter between centers: 630 mm, workpiece diameter (max.): 630 mm, year of last overhaul: 2025, overall weight: 2,500 kg, Technical specifications: – Workpiece diameter min / max. 5 mm / 630 mm – Distance between centers min / max 15–1050 mm, – Measurable tooth width: 540 mm, – Module min / max 0.5–20 – Installation dimensions: Length × Width × Height 3250 mm × 2650 mm × 2360 mm – Maximum installation area: 8.4 m² – Machine weight: net 2500 kg Control system: Zeiss ST 57 Required power supply: 220 volts, 50 Hz, compressed air: 8 bar Machine accessories: – Basic machine with probe holder – Höfler measuring sensor with Zeiss probe holder – Calibration sphere Nwjdpfx Ao Afqd Eeirjn – Complete set of workpiece carriers – Auxiliary table – Probe assortment: Various measuring probes for different modules – Computer with monitor and printer – Operating manual in English Software: Basic equipment – Software module for testing spur and helical gears, evaluating K profiles, pitch, concentricity, axis position program – Selectable software language – Evaluation according to DIN/ISO/AGMA/customer-specific tolerances

Condition: like new (used), Year of construction: 2011, measuring range X-axis: 100 mm, measuring range Z-axis: 1,000 mm, mount diameter: 100 mm, overall weight: 160 kg, path measurement accuracy: 2 mm, tool weight: 1,60,000 g, Year of construction: 2011 Fully automatic with manual options Intuitive input of automatic measurement cycles Wear-free and maintenance-free linear motors Flexible control console From manual to fully automatic Low distortion even under the maximum permissible load thanks to its high installed weight Nwedpfx Aisyzzb Seren FEM-optimised and thermally stable cast iron construction RFID – data carrier system Customer-specific data storage Measurement processes with integrated data retrieval and storage Integration of all popular RFID systems The read / write head can be positioned automatically and manually for all popular tool holder systems Technikal data Length and diameter up to 1,000 mm Max. tool diameter for measuring according to snap gauge principle 100mm Maximum tool weight 160 kg Tool holder SK50 (additional holders availale from company HAIMER/Microset) Concentricity at the spindle nose 2 μm Repeatability ±2 μm Tool preseting Quick and precise measuring results thanks to intuitive operation Accurate measurement values for complex and helical cutters with the precise focus window User administration and access privileges Display currently in 16:9 format Cross hair fixed / floating with automatic measurement lines and automatic contour evaluation One design for the software of all equipment classes Windows 7 Professional or Ultimate, whatever you need Data exchange Post-processed data is transferred to the relevant data exchange drive either via the network or via USB. All equipment can provide tool data to almost any software (tool management, databases, CAD / CAM) via a bidirectional interface – irrespective of whether.

Condition: used, Year of construction: 1995, total length: 22,000 mm, total width: 7,300 mm, total height: 6,700 mm, cutting range round steel at 90°: 120 mm, type of input current: three-phase, overall weight: 30,000 kg, input voltage: 380 V, cutting range square steel at 90°: 120 mm, input current: 63 A, cutting range flat at 90° (X-axis): 120 mm, space requirement height: 7,000 mm, space requirement length: 25,000 mm, space requirement width: 13,000 mm, Complete KASTO automated long-material storage, handling and sawing system for steel bars, tubes, pipes and profiles. The system consists of a KASTO SSZ Vario 140 Duo automatic storage installation with material handling equipment and a KASTO PKS 140 PL circular saw. The installation is designed for efficient storage and automatic supply of long steel materials directly to the cutting process. A key advantage of the system is the very high storage density. The storage system itself, without the saw, measures approximately: 22.0 m × 7.3 m × 6.7 m Floor space required: approx. 160.6 m² At the same time, the system offers a total of: 526 storage locations consisting of: 489 storage shelves with 275 mm depth 37 storage shelves with 565 mm depth Each storage location can accommodate material up to: 6,500 mm length The calculated total horizontal shelf area is approximately: 1,010 m² This means that more than 1,000 m² of usable long-material storage surface is concentrated within only approximately 160 m² of factory floor space. The storage structure consists of 9 double-sided material storage columns. Technical data Manufacturer: KASTO Maschinenbau GmbH & Co. KG Model: SSZ Vario 140 Duo Documentation designation: SSL Vario 140 K-Duo Year of manufacture: 1995 Storage locations: 526 Maximum material length: 6,500 mm Maximum material dimensions: Ø 140 mm or 260 × 120 mm Handling device capacity: 10 kN / approx. 1,000 kg Storage location load ratings: 5 / 10 / 15 / 25 kN Storage dimensions without saw: approx. 22.0 × 7.3 × 6.7 m Storage footprint: approx. 160.6 m² Calculated total shelf area: approx. 1,010 m² Storage configuration: 9 double-sided storage columns Electrical supply: 380 V / 50 Hz / 3-phase Power: 20.0 kW Current: 63 A Weight of bridge handling unit according to nameplate: approx. 4,700 kg Integrated / associated sawing machine: KASTO PKS 140 PL circular saw The system is particularly suitable for steel service centres, steel distributors, metalworking companies, machine builders and manufacturers processing large quantities of bars, tubes and profiles. Automatic material storage and handling can significantly reduce internal transport, forklift and crane movements, material searching and preparation time before cutting. Technical documentation and installation drawings are available. Nwjdpsz I Tm Iefx Airen Location: Poznań, Poland Inspection possible by prior arrangement. Exact technical condition and final scope of supply can be confirmed during inspection.

Condition: used, Year of construction: 1995, Concentrating plant for the juice industry. The plant dates back to 1977 and was rebuilt in 1992. It was extended and equipped with a new cooling tower circuit. The plant is designed for 6600 kg/h of cloudy apple juice. With a single-stage concentration, the juice is thickened from 12° to 25°Brix. Up to 71°Brix can be achieved in the second pass. Additional title: with aroma recovery Input quantity apple juice: 6600 kg/h Water evaporation: 4840 kg/h Discharge quantity concentrated juice: 1760 kg/h Steam consumption: 1685 kg/h Length: 7,70 m Width: 6,70 m Nwsdpfowu N T Ajx Airjn

Condition: like new (used), Year of construction: 2024, operating hours: 490 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, COMPLETE MINERAL MASTERBATCH PRODUCTION LINE – PELLETIZING PROCESS High-concentration mineral masterbatch • Turnkey industrial installation • Spain ASKING PRICE: XX.XXX + VAT | COMPLETE LINE ONLY A complete production solution Complete industrial installation designed for the production of highly concentrated mineral masterbatch. The line integrates raw material handling, weighing/dosing, high-speed mixing, conveying, pelletizing, screening, and bagging into a single, coordinated system. The equipment is offered as one complete lot, dismantled and available for relocation. Capacity Approx. 750–850 kg/h* Operating hours Maximum 490 h Mixer 500 L / 300 L usable / 75 kW Pelletizer 350 mm / 37 kW Automation Siemens S7-1200 PLC Power supply Includes 200 kVA Perkins generator Integrated process RAW MATERIAL FEEDING → AUTOMATIC WEIGHING/DOSING → HIGH-SPEED MIXING → TRANSFER → PELLETIZING → SCREENING → BAGGING Why this line is attractive • Complete and integrated: avoids the engineering and integration work involved in sourcing the equipment individually. • Very low operating hours: maximum recorded operating time is 490 h. Nwodpjz Aibajfx Airjn • Industrial-scale mixing: 500 L mixer with 75 kW drive and variable-speed control. • Automated dosing and control: Siemens S7-1200 PLC architecture with weighing and recipe-management functions. • Relocatable asset: installation is offered dismantled, making it suitable for transfer to another industrial site. *Capacity is an approximate figure based on the installation configuration and intended application; actual throughput depends on formulation, operating conditions, and product specification.

Condition: like new (used), Year of construction: 1999, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 87.99.167, pressure: 50 bar, pressure (max.): 65 bar, input voltage: 400 V, type of input current: AC, Homogenizer Test Plant - Very Little Operation Was used in a test and pilot plant. Originally designed for homogenizing cream cheese (UF concentrate from feta production) Nwodpfeway Rpox Airen Capacity approx. 400 l/h Drive pulley conversion kit for up to approx. 700 l/h included Machine fully functional and in good working order.

Condition: excellent (used), Year of construction: 2023, operating hours: 2,000 h, functionality: fully functional, Equipment: compressor, documentation/manual, Available immediately due to change in business direction. A complete, fully operational beverage production system currently used for the commercial manufacture of premium kombucha. The plant is equally suitable for the production of soft drinks, functional beverages, botanical drinks, syrups, flavoured waters, iced teas and other non-carbonated beverages. Manufactured from food-grade 304 stainless steel and certified to UKCA, CE and TÜV SÜD standards. Located in Ireland. Plant Specification • 4 × 4,000L Jacketed Fermentation/Process Vessels • 2 × 2,000L Mixing/Kettle Vessels with Whirlpool Mixing • 4,000L Cold Water Tank • 4,000L Glycol Tank • Plate Heat Exchanger • Siemens PLC Control System • Complete Glycol Chilling System • Pumps and Pipework throughout • Stainless Steel Process Pipework • 2 × 200L CIP Units • Fully integrated valves and sanitary fittings • Temperature controlled throughout production. Metered Pump Nsdpfszp Hkxex Airewn Capabilities Suitable for production of: • Kombucha • Functional beverages • Soft drinks • Flavoured waters • Botanical drinks • Tea beverages • Juice blends • Syrups • Beverage concentrates • RTD drinks The integrated whirlpool system allows efficient ingredient incorporation and mixing. Condition • Fully operational • Currently in production • Well maintained • Excellent condition • Available for inspection under power Certification • CE Certified • UKCA Certified • TÜV SÜD Certified • Food Grade 304 Stainless Steel Location Ireland Can assist with dismantling and loading. Price POA / Offers Invited Alternatively willing to discuss sale of complete turnkey beverage manufacturing facility. Photos and videos available upon request.

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Pre-filtration and protection Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Dual softening unit Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Technical data: Permeate flow rate at 15 °C: approx. 450 l/h Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Nwjdpfszt Sb Djx Airsn Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Diaphragm expansion tank: 8 liters Permissible water temperature: 1–30 °C Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Condition: good (used), Year of construction: 2007, input voltage: 230 V, measuring range X-axis: 250 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 570 mm, overall weight: 315 kg, - Universal measuring device for measuring tools in transmitted light (2D) and incident light. - Easy to use thanks to photorealistic input dialog on 2 displays and automatic cutting edge recognition. -Swivel device for radial and axial measurement in incident light. - Special measuring programs for radius contour, rake and clearance angle, chamfer width, wobble compensation, step drills, concentricity and much more. - Contour progression measurement >lasso< with nominal/actual comparison. - Incident light image processing >metis 2D< - Protocol editor >Matrix< Technical data Travel Z 570 mm X 152 mm Measuring range Nedpfx Asqc Tkbeirswn - Longitudinal axis Z 570 mm - Diameter 250 mm - Repeat accuracy ± 0.002 mm - Setting accuracy < 2μ - Display accuracy 0.001 mm - Positioning accuracy 0.001 mm - Concentricity accuracy 0.002 mm Optionally, another machine can be offered as a spare parts carrier. However, this is defective.

Condition: used, Year of construction: 2018, Sander Multizon ozone generator with a rated output of 120 g of ozone per hour. Technical data according to the nameplate: - Manufacturer: Erwin Sander Elektroapparatbau GmbH - Machine: Multizon ozone generator, 120 g/h - Type: Nwjdpfsz Ri S Tox Airon - Machine no.: 2582 - Year of manufacture: 2018 - Rated output: 120 g ozone/h - Ozone concentration: 20 g ozone/m³ - Permissible operating pressure: -0.05 bar - Air flow rate: 6.0 m³/h - Electrical connection: 400 V – N – PE, 50 Hz - Power requirement: 12 kVA (excluding injector pump) - Current consumption: L1 13 A; L2 5.4 A; L3 10 A - Weight: 330 kg - CE marking

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Holz-Her 5-Axis Nesting Machining Center DYNESTIC 7535 LIFT ATTENTION: The machine is located in Sydney / Australia! Nesting with lifting table + labeling station + pusher conveyor, including a manual labeling station for small parts. Machining area: 3700 x 2200 mm. The milling spindle has a power of 13.0 kW / 18 HP (S6) and accepts tools with a maximum diameter of 350 mm via an HSK interface. Drilling with 24 spindles, 18 vertical and 6 horizontal. The maximum drilling diameter is 35 mm. For grooving, the drilling head has an integrated sawing unit for a saw blade with a maximum diameter of 125 mm and a maximum width of 4 mm. 18-position tool changer, pneumatically liftable, with a cover to protect the HSK 63F collet, as well as a 1-position pick-up changer for saw blades with a maximum diameter of 350 mm. Pneumatic stops, which can be recessed into the table, for special machining operations on the nesting table, or also with vacuum suction cups. 1000 m³/h vacuum capacity via VariAir pump (frequency-controlled). To be able to use the vacuum capacity in a concentrated manner, the table has a 16-zone vacuum system. Power Label above the lifting table for panels up to X=4200 x Y=2200 mm. Touch Label Light - extra label printer under the operator screen for labeling small parts. The pre-installed pusher unit is connected to the extraction system and can clean the panels and the nesting table. Overhead laser for complex contours (laser color green). Screen: 21.5'' / 16:9 touch screen Software: 1x Campus V7 (machine) + 1x Campus V7 (office), including high-speed curve and 5-axis simultaneous milling. Barcode scanner Touch Tool - tool length measurement Cold Gun - tool cooling Delivery, installation, and training for the machine can be carried out directly by us for an additional charge. The machine is currently located at our branch in Sydney / Australia. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Nwodpfxjz Hvy Io Airsn Our general terms and conditions can be found on our website at holzher.de/de/agb.