Used Contour Edgebander for sale (1,515)

Condition: like new (used), Year of construction: 2023, operating hours: 1,131 h, functionality: fully functional, machine/vehicle number: 220.09.023.23, feed rate X-axis: 18 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, Edge thickness...0,4-3 (6) mm Panel thickness...8-60 mm Feed speed.. 10+18 m/min. Aggregates: Spraying unit top and bottom - Separating agent Joint trimming unit - dia tools Edge (coil+strips) magazine Quickly changeable application unit + 1 additional, "Easyclean" system "Glue box" system Pressure zone - 1+2 rollers, pneumatical Spraying unit - lubricating agent Guillotine for coil edge 0,4-3 mm Isdpfov Rlziox Adwjht End trimming unit 2x0,35 kW, 200 Hz, tilt-able 0-10° Trimming unit - R2+flat, 2 x 0,75 kW, 200 Hz Profile scraping unit, R2, pneumatically ON/OFF Corner rounding unit, 2 motors, servo adjustment Flat scraping unit in nesting execution, pneumatically ON/OFF Buffing unit Spraying unit top and bottom, cleaning agent Condition: Machine is like new, only 19 km of edge was done

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Edgebander SCM Olimpic K500 HP Year of manufacture: 2024 Condition: Perfect, only 17,000 meters of use Very rich factory equipment: - Servo-controlled pressure beam - Pneumatically controlled infeed element stop - SGP glue pot for EVA or PUR adhesives - EVA pre-melter – SCM QMS with automatic glue feeding to the pot - Automatic edge feeder - Servo-controlled pressure rollers and edge holder - Milling unit with multi-tool R1.R2.straight, 2-axis servo control Ihedpfx Adew Dn R Sswst - Corner rounding unit with multi-tool R1.R2, 1-axis servo control - Radius scraper with multi-tool R1.R2, servo-controlled in 2 axes - Glue scraper - Polishing unit - Hot air blower - 3 types of fluids – anti-adhesive, cleaner, and fluid for delicate edges - Factory-installed LED lighting - Feed speed: 12 m/min, element spacing: 60 cm

Condition: good (used), Year of construction: 2022, functionality: fully functional, Single-sided edge banding machine for applying edge banding tape with hot-melt adhesive to all four sides of a rectangular panel, including the finishing of the edge tape. Ijdpfx Adexpgxvsweht TECHNICAL SPECIFICATIONS: • Feed speed: 7 m/min • Panel thickness: 8 – 50 mm • Edge band thickness (strips): 0.4 – 3 mm (optionally 5 mm) • Edge band thickness (roll, incl. covers): 0.4 – 3 mm • Max. cross-section of edge material for trimming: 150 mm² • Roller holder diameter: 700 mm • Max. projection of edge band relative to the panel: 4 (2+2) mm • Min. distance between two panels: 600 mm • Min. panel length (minimum width 100 mm) with edge tape on roll: 160 mm; with edge material in strips: 180 mm • Min. length of edge tape on roll: 200 mm • Min. length of edge material in strips: 220 mm • Min. panel width with edge tape on roll: 110 mm (min. length 210 mm) • Working height: 900 mm • Width for fixed panel support: 615 mm

Condition: used, Year of construction: 2018, functionality: fully functional, Biesse Akron 1400 Edgebander. Genuine UK Machine available for demonstration: £10,000 + VAT This machine is suited for flush or bevel trimming of edgebanding materials upto 8mm thick (Max 3mm on the coil). Currently the machine is fitted with Straight cutters, but combination cutters can be fitted for radius trimming. This machine DOES NOT do corner rounding. But does have the following units: - Pre-Milling. EVA Hot Melt Gluing System. Ihedpfx Aoxrwm Nsdwot End Snipping Saws (Straight or Chamfer cut). Rough Trim (Top & Bottom). Fine Trim (Top & Bottom). Glue line scraping (Top & Bottom).

Condition: new, Year of construction: 2024, Edge thickness 0.4 - 3 mm The thickness of the glued boards is 8 - 45 mm The difference in the width of the rim and the thickness of the board max 4 mm The minimum length of the glued boards is 170 mm The minimum width of the boards to be glued is 90 mm Mechanical feed speed 9 m / min Adhesive temperature 60–250 ° C 1.2 l tank capacity Rotation of the heads of the pre-milling machine 12,000 rev. / min. Collecting size of the pre-milling machine 0 - 2 mm Rotation of milling cutters of the linear milling machine 12,000 rev. / min. Rounding radius R = 2mm Trimmer ball rotation 12,000 rpm. Rotation of polishing discs 2800 rpm Installed power 6.0 kW Compressed air pressure 7 - 8 bar Extraction connector min. 3,500 m3 / h 3 x fi 125 mm Ihsdpfx Aegyi Utedwjt Extended width. table (steady rest) 560 mm Table working height 960 mm Dimensions (L x W x H) 4030 x 640 x 1420 mm Gross weight 915 kg

Condition: good (used), The HOMAG KL 78 is a high-performance single-sided edgebander designed to meet the needs of industrial production. With advanced technology and versatile configuration, this machine is ideal for quickly and precisely processing panel edges with excellent quality. Ihedpsuh Acasfx Adwet Main Features: - Homatic Numerical Control for intuitive and precise operation management. - Grinding Units to ensure perfect surfaces. - Gluing Unit with Pre-Glueing for uniform adhesive application with minimal waste. - Edge Pressure Unit for a stable and durable finish. - Double End Trimmer for fast and precise edge finishing. - Overlapping Double Refiner for smooth and flawless edges on both sides of the panel. - Multi-function Rounder for complete and detailed edge processing. - 0°/90° Milling Group for highly precise and finished edges. - Edge Scraper and Glue Scraper for a flawless cleaning and perfect finish. - Brushes for thorough cleaning and surface finishing. - Available Space for Additional Units for further customization. - Spare Tool Groups for easy and continuous maintenance. With the HOMAG KL 78, every edging operation is made simple and fast, boosting production efficiency without compromising on quality.

Condition: used, machine/vehicle number: 007694, Position 1: Panel Feeding and Loading HOMAG-PROFI KAL330/7/A3/WZ Position 2: bordatriceLottoUno HOMAG-PROFI KAL330/7/A3/WZ Iedswuuf Rjpfx Adwsht Position 3: Panel Return Systems HOMAG-PROFI KAL330/7/A3/WZ

Condition: excellent (used), Year of construction: 2017, HOLZ-HER SPRINT 1329 edgebander Main Advantages and Features: ● Construction: Robustly built, stable form, and excellent vibration dampening. ● ● Control Panel: Intuitive panel with a 15-inch touchscreen monitor, allowing for easy input, storage, and display of processing data, as well as machine control. ● ● Automation: Automatically records information about used programs, processed item counts, and machine operating time. ● Quiet Operation and Safety: Noise-reducing protective covers minimize noise and enhance workplace safety. ● Programming: Programmed HOLZ HER control ensures full functionality of the edgebander, with the ability to run complete machining programs. ● Motorized Adjustment: Motorized adjustment of the height of the workpieces. Ijdown Nuaspfx Adwjht ● Transport: Rollers at the infeed and outfeed of the machine. The machine's transport chain has automatic lubrication. Detailed Specifications and Equipment (Working Units): 1. Pre-milling Unit 1802 (2 x 2 kW, 12000 min⁻¹): ○ One synchronous and one counter-rotating unit with two K/F 70-64 30 diamond milling cutters. ○ Motorized adjustment of milling thickness (max 3 mm). 2. Edge Feeding Unit 1901 Synchro: ○ Allows for precise adjustment of the edge overhang, significantly contributing to edge savings. ○ Edge feeding from a single plate with a diameter of 820 mm. Loading width for strip edges: 40 mm. 3. Glue Jet 2.3 Gluing System (Patented System): ○ No glue roller – glue is applied via a nozzle. ○ Compatible with both EVA glues (granules and cartridges) and PUR glues. ○ Full adjustment of the start and end of glue application, as well as glue application height depending on the workpiece thickness. ○ Hybrid technology, heating time: 3-4 minutes. 4. Pressure Zone 1913 MOT (Motorized Adjustment): ○ Three pressure rollers, with the first one driven and made with SYNCHRO technology. ○ The other two rollers are tilted for better pressure on the edges. 5. Trimming Unit 1928 (2 x 0.45 kW, 12000 min⁻¹): ○ Pneumatically adjustable. ○ For precise trimming of edges up to 60 mm thick with HM saw blades. ○ Both units adjustable 0-10°. Two saw blades Ø110. 6. Multi-functional Milling Unit 1826 MOT4 (2 x 0.65 kW, 12000 min⁻¹): ○ Motorized adjustment. ○ Designed for profiling edges from 15° to 90° or straight. ○ Uses diamond tools made with AIR STREAM technology. ○ Tool radius R=2 mm. 7. Corner Rounding Unit 1833 MOT4 (2 x 0.65 kW, 12000 min⁻¹): ○ Motorized adjustment. ○ For corner rounding on the fly, with HM tools up to max. R=3 mm. ○ Ability to duplicate radius milling on the edge. ○ Uses diamond tools. ○ Tool radius R=2 mm. ○ Workpiece thickness 10-60 mm. 8. Scraping Unit 1929 MOT4 (Profile Scraper): ○ Motorized adjustable. ○ For scraping PVC and ABS. ○ Max radius up to R=3 mm. ○ Equipped with two replaceable knives, blow nozzles, and dust extraction. 9. Polishing Unit 1964 (2 x 0.12 kW, 1400 min⁻¹): ○ Consists of two cleaning units with rotating felt discs. ○ Both units adjustable 0-5° for improved cleaning effect. 10. Netsystem 1856: ○ A set of 4 spraying nozzles (two at the front, two at the rear of the machine). ○ Liquid with anti-adhesive and cleaning properties. ○ Ensures an invisible joint and a pleasant finish.

Condition: repair required (used), Motorized edge banding machine Hyllus mod. 300 Robur used to be overhauled working maximum edge banding thickness 3 mm. Ihjdpfjwakgujx Adwjt groove depth 450 mm. axis distance 100 mm.

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: HFF 08 Machine no: 08/379 Year model: 2005 Edge cutter for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radii. Tech data: Max edging thickness: approx. 3mm Max workpiece height: 50mm Inner radius min: 40mm Milling motor: 12000 Rpm Work table height: 865mm Max 6 bar Ihedpjq H Spvsfx Adwst Chipboard: 120mm Milling motor: 0.37Kw Motor: 1.5Kw, 50Hz, 400V 3-phase Stock no: 2001922

Condition: new, Year of construction: 2024, Max. edge thickness 3 mm (optionally up to 8 mm) Min/Max. work piece thickness 8–60 mm* Min. workpiece length approx. 200 mm* Min. workpiece width approx. 80 mm* Feed speed approx. 10 m/min. Ihjdpfx Adeg Tu Rkswjt Ready to operate approx. 6 min. Power consumption max. approx. 14 kW Electrical connection 400 V – 3 Ph – 50 Hz Machine dimensions 5,250 x 1,230 x 1,430 mm (LxWxH) Weight approx. 1,700 kg pre-milling head Whispercut radius for corner rounder R = 2mm heatable infeed fence quick change device f.motor corner rounder change motor for corner rounding unit including HM profile cutter radius for change motor R = 1mm Radius Multi-Radiusscraper R2/R1 wheels release agent spraying unit cleaning agent spraying unit protection spraying edge nesting pneumatic 3-point adjustment

Condition: ready for operation (used), Year of construction: 2006, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 2404, workpiece weight (max.): 900 kg, type of input current: three-phase, input voltage: 380 V, Single shoulder edge bander, fully functional, out of use for a year due to job change. Recently overhauled. Complete with piece return belt as an accessory. It was used to edge furniture bands. Compact and very functional machine. Iodpjv S T Utofx Adwoht

Condition: ready for operation (used), Technical characteristics Part thickness : 8 to 50 mm Edge thickness: 0.4 to 8 mm Programmable control with group indexing Feed rate 11 m/min Composition: Edge insertion device Milling unit (straightening) Pre-melting device Edge magazine End cutting unit Milling unit (flush) Form milling unit Surface scraping unit Polishing brushes Suction nozzles : 1 x ⌀ 120 mm / 3 x ⌀ 60 mm / 1 x ⌀ 100 mm 6 bar pneumatic system Compact and complete machine Power and Motors Voltage: 400 V Pluging: Three-phased Power: 10,5 Kw Overall dimensions Lenght: 4860 mm Width: 900 mm Ihedpfst Hncwex Adwet Height: 1610 mm Weight: 2000 Kg

Condition: used, Double squaring edgebander usable in line or off line as first or second machine CNI control on separate electrical cabinet Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3200 Ijdpekvrxqofx Adwjht Maximum panel width mm 3200 Min - max panel height mm 10 - 60 Edge thickness in roll min - max PVC-ABS mm 0,3 - 3 Continuously variable feed speed 10 - 40 m\min Motorized pressure rubber belt Bearing track with retractable pin Distance between the retractable pins mm 500 Squaring part composed of (for each side): Rectifier unit with two motors Edging part made up of (for each side): Gluing unit with premelter for EVA glue Edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapped trimming unit Staggered gleaning unit with two motors Rounding unit with 4 motors 0-90° inclinable spindle moulder unit Edge scraper group Brush group

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: AKV 88 D Machine no: 569-P3 Year model: 2005 Iedpoq Ihxpjfx Adwsht Tech data: Max edging thickness: approx. 3mm Max working height: 50mm Inner radius min: approx. 8mm Feed speed 0-7 m/min Warm-up time: approx. 6.5 min Motor: 9.3Kw, 50Hz, 400V Machine size (lxwxh): 1360x690x1220mm Weight: approx. 150Kg Stock no: 2001921BXA

Condition: new, Year of construction: 2025, Space-saving with excellent specifications. Your entry point into edgebanding could not be better, as the 3.3m long F2 is both cost-effective and space-saving. And it also has the specifications you require to process perfect edges right from the word go – diamond-tipped cutters guarantee superbly prepared workpieces for edging. The specifications include pre-milling aggregate (up to 3 mm), the top-side fast-heating glue pot, trim saw and combicutter. The F2 can also be optionally fitted with a surface scraper. Get started into perfect edgebanding! Max. edge thickness: 3mm Min./max. workpiece thickness: 8–50mm Min. workpiece length: approx. 160mm Feed speed: 10 m/min. Ready to operate: approx. 3.5 min. Power consumption: ∅ approx. 5.9 kW Electrical connection: 400 V/3Ph/50Hz Table height: approx. 900 mm Machine dimensions: approx. 3,350 x 1,300 x 1,400 mm (LxWxH) Weight: approx. 620 kg Exhaust connection: ∅ 1x140 mm Surface scraper (incl. pneumatic disengagement) Ihjdoglfw Nepfx Adwet

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 400 V Pluging: Three-phased Ihedpfxstrihke Adwet Overall dimensions Lenght: 5250 mm Width: 1600 mm Height: 1500 mm Weight: 1600 Kg

Condition: new, Year of construction: 2024, Compact machine with pre-milling unit. Ihodpfed H Elksx Adwot Technical data: • Feeding speed – 7 m/min. • Panel Thickness - 12-45 mm • Edge Thickness – 0,4 – 3 mm • Mini. Panel width – 90 mm • Mini panel length – 90 mm • Working table height - 856 mm • Extensible support width - 560 mm • Extraction connector Ø in mm - Ø4" • Total Motor Power - 6,0 kw-1PH ; 5,75 kw-3PH • Overall Size (LxWxH) – 3200 x 1200 x 1200 mm • Weight, kg (with standard equipment) – 500 kg / 632 kg (N.W./G.W.) • Packing size (LxWxH) – 2820 x 720 x 1320 mm • Pre-milling – 9000 rpm • Up/down – 10500 rpm • Front/rear – 8800 rpm • Buffing – 2800 rpm • Power (kW) of each motor : • Feeding motor – 0,75 kW • Glue spindle motor - 0,25 kW • Front/rear trimming motor - 0,18 kW • Flush trimming motor - 0,55 kW • Upper buffing motor – 3 ph-0,12 kW; 1ph-0,18 kW • Lower buffing motor – 3 ph-0,12 kW; 1ph-0,18 kW • Pre-heating – 0,4 kW • Glue pot heating (5 elements) – 1,315 kW

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 400 V Pluging: Three-phased Power: 12,5 Kw Overall dimensions Lenght: 4388 mm Width: 1165 mm Height: 1385 mm Ihsdpfjupqb Ujx Adwet Weight: 1200 Kg

Condition: new, Year of construction: 2025, Edge thickness 0.4 - 3 mm Thickness of glued boards 10 - 45 mm Minimum length of glued boards 80 mm Minimum width of glued boards 60 mm Mechanical feed speed 8 / 11 / 13 m/min. Glue temperature 185 - 210 ℃ Tank capacity 2.5 - 3 kg Pre-milling head speed, main 12,000 rpm Rounding radius R=2mm Working pressure compressed air pressure 6 - 8 bar Pre-milling unit 1.8 kW x 2 Glue application roller unit 0.75 kW Glue heating unit 1.5 kW Final milling unit 0.37 x 2 kW Main milling unit 0.75 kW x 2 Corner milling unit 0.75 kW Isdpfx Adjv Dt T Hewoht Transport belt unit 1.5 kW Overall dimensions 4500 x 700 x 1450 mm Transport dimensions 4280 x 650 x 1280 mm Weight 1230 kg Pre-milling milling: diamond milling cutter. Gluing Final cutting Milling: two motors Corner finishing Radial scraper Flat scraper (glue) Spray system Polishing Internal lighting Automatic lubrication Electrical equipment: Delta brand

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 380 V Ihodpjui Ebnjfx Adwot Pluging: Three-phased Power: 5 Kw Overall dimensions Lenght: 2910 mm Width: 1800 mm Height: 1240 mm Weight: 850 Kg

Condition: ready for operation (used), Technical characteristics motorized scraper edge length cut workpiece height max: 65 mm - min 11 mm max temperature setting 400 ° C feed speed 4m / min Ihsdpjtriiaofx Adwet quick settings easy to use without compressed air for pre-glued PVC, melamine and polyester Power and Motors Voltage: 220 V Overall dimensions

Condition: ready for operation (used), Technical characteristics Calibration of 2 diamond tool holders Gluing with hot melt glue tray Automatic edge feeding Pressure group Tiltable end cutting Straight / chamfer / 1/4 round trimming Edge scrapers Iodpfx Adjttrp Sswjht Brush Capacity : panel thickness 50 mm edge thickness roll 0.4 - 3 mm edge thickness strips 8 mm Feed 10m/min Power and Motors Overall dimensions Lenght: 3700 mm

Condition: ready for operation (used), Technical characteristics Panel thickness 10 to 60 mm Edge thickness 0,4 - 3 / 8 mm Minimum panel length 150 mm Calibration Gluing End cutting Trimming Rounding Radius scraper aggregate Glue scraper Brushing Power and Motors Power: 8.6 Kw Ijdpfxeuaih Te Adwjht Overall dimensions Weight: 1600 Kg

Condition: ready for operation (used), Technical characteristics Composition : Pre-milling unit Gluing unit End cutting unit Milling unit Glue scraping unit Touch screen control Maximum workpiece thickness : 55 mm Maximum edge thickness: 2 mm Feeding speed : 5.5 m/min Extendable parallel bar 5 x 100 mm diameter suction nozzles Power and Motors Voltage: 380 V Pluging: Three-phased Power: 9,8 Kw Overall dimensions Lenght: 2389 mm Width: 1125 mm Height: 1305 mm Isdpetrihnefx Adweht