Used Conventional Milling Machine for sale (65,185)

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank Kedpfx Afoqa Txqopslt - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: used, Radial drilling machine WEBO Type R4bR Kjdpfxeu T Ty Hj Afpolt Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Ksdotrhq Hopfx Afpslt Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 Kledpfxofbt Hue Afpst movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: used, Universal Tool Milling Machine MAHO Type MH 800 P with digital readout and HEIDENHAIN TNC 121 contouring control . 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently used only occasionally in the workshop of an electronics company. Travel X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40–2000 rpm, 18 steps Feed X, Z-axis: 10–500 mm/min, stepless Feed Y-axis: 5–250 mm/min, stepless Rapid traverse X, Z-axis: 1.4 m/min Rapid traverse Y-axis: 0.7 m/min Quill vertical travel: 100 mm Quill feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill horizontal travel: 100 mm Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC contouring control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02–0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping Kledpsv Amryofx Afpst - Coolant system integrated in the machine base - Universal rotary table, 360° rotatable, tilts and swivels 30°, 225 mm cross adjustment - Rotary table with direct indexing 72 x 5° and indirect indexing via index plate 1:120 = 1 rev = 3° - Swiveling control panel - Central lubrication - Operating manual - Machine mounted on steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Space requirements L x W x H 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Total weight: 4250 kg (actual) Very good condition

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system Klsdpfxsv R E Rdj Afpet - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Klsdpfx Asw Nklhsfpst Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Kledpjw A Af Iefx Afpot Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: used, CNC Milling Machine ABENE Type VHF-360TI serial no. 36084 year of construction 2008 CNC control HEIDENHAIN TNC 320 Travel X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle holder SK 40 Spindle speed 55 - 3000 rpm. 2 steps Feed speed 30 - 4000 mm/min. infinitely variable Rapid traverse speed (X + Y-axis) 4000 mm/min. Rapid traverse speed (Z-axis) 2000 mm/min. Spindle nose-to-table distance 20-495 mm Motor power spindle drive 7.5 kW Mains connection 400 Volt, 50 Hz - CNC contouring control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces - Electronic handwheel - mechanical handwheels for X and Y axis - Spindle speed manually switchable with 2 gear stages (stage 1 = 55-700 rpm) + (stage 2 = 701-3000 rpm) - Inclined bed concept with laterally mounted swivel spindle head +/- 50° - Manual inclined bed adjustment via hand crank - Hydro-mechanical tool clamping Kljdpfjty A Ehjx Afpot - Automatic central lubrication - Coolant system with electric cooling lubricant pump opposite - Machine light - Switch cabinet permanently attached to the machine - Operating hours of control unit on = 14780 hours - Read operating hours machine on = 12980 hrs. - Read operating hours program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm Kedpfx Aoy Tlx Sjfpslt z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: good (used), Year of construction: 1965, Model maker milling machine with swivel head, MK 4, rotary table, d. Accessories Year of construction: 1965 X (mm): 1000 Kodpfoq Ixz Rsx Afpolt Y (mm): 600 Mounting (iso/mk): 4 Power (kw): 2

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Features and technical data: - with tilting spindle: 0° - 45° - with aluminium sliding table - Table size: 1100 x 620 mm - Working height: 880 mm - Sliding table dimensions: 900 x 200 mm - Sliding table travel: 900 mm - Spindle diameter: 30 mm Kodpfx Afsy Si Arjpelt - Spindle stroke: 150 mm - Speeds: 3100/4600/6200/8000 rpm - Motor: 4 kW - with 4-roller power feeder - Dimensions: 1200 x 1000 x 1400 mm - Weight: approx. 490 kg Availability: short-term Location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2009, operating hours: 2,542 h, functionality: fully functional, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned, powered on, ready for demonstration Spindle hours: 2,542 h Klsdpfx Ajy S E Ahjfpet X travel: 400 mm Y travel: 350 mm Z travel: 400 mm Tool holder: SK 40 Spindle speeds: 1,000 – 4,500 rpm Feeds: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control: TNC 320 Motor power: 5.5 kW Weight: 1,920 kg Space requirement: approx. 2,000 x 2,000 x 2,100 mm Total connected load: approx. 7 kVA Central lubrication Coolant system CE compliant Scope of delivery: – Technical documentation – Full safety enclosure – LED machine lamp

Condition: good (used), Year of construction: 2001, functionality: fully functional, Kunzmann WF 7 CNC milling machine TNC 410 control Manufacturer: Kunzmann Type: WF 7 Year of manufacture: 2001 Condition: used, under power Control: Heidenhain TNC 410 X-path 610 Y-path 400 Z-path 400 SK 40 housing Speed 1-5000rpm Tilt/swivel table Scope of delivery: - Underlays Kodpfoy S E Abjx Afpelt - Various tool holders

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Kunzmann WF 600 M milling machine (2012) Manufacturer: Kunzmann Type: WF 600 M Year of manufacture: 2012 Kljdpjy S Ez Dofx Afpst Condition: used, very good Control: Heidenhain TNC 124 X-axis 600 mm Y-axis 400 mm Z-axis 400 mm Table length 650 mm Table width 350 mm Spindle speed 4500 rpm Vertical spindle and horizontal spindle - SK40 Hydraulic tightening system Main drive motor: 5.5 kW Dimensions approx.: 2 x 2 x 2 m Weight approx. 2000 kg Coolant system Scope of delivery: - Documentation - Machine light - Machine feet - Machine vice

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 580 mm, feed length Y-axis: 200 mm, feed length Z-axis: 130 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 130 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 100 rpm, spindle mount: MK 4, throat depth: 286 mm, quill diameter: 130 mm, quill travel distance: 130 mm, type of input current: three-phase, total length: 860 mm, total height: 1,200 mm, table width: 240 mm, input voltage: 400 V, total width: 740 mm, table length: 800 mm, drilling capacity: 45 mm, position of the milling head: ±90°, drilling depth: 130 mm, workpiece weight (max.): 375 kg, distance table to spindle center: 450 mm, Equipment: documentation/manual, rotational speed infinitely variable, Drilling and Milling Machine ZX7045B VARIO – professional metalworking machine The ZX7045B VARIO drilling and milling machine is a solid and versatile machine designed for professional metalworking in workshops, production plants and tool rooms. The machine allows drilling, milling and tapping operations, making it a universal solution for many machining applications. Ksdpfx Afjyvh Hqspolt The machine is equipped with a powerful 2.2 kW motor and infinitely variable spindle speed control in the range of 100–3200 rpm. The spindle is mounted on precision bearings ensuring high machining accuracy, while the gear transmission operating in an oil bath guarantees durability and quiet operation. The head can be adjusted in height and tilted ±45°, allowing machining at various angles. The automatic spindle feed and automatic spindle reverse during tapping significantly improve operator convenience. A large worktable measuring 800 × 240 mm with T-slots allows stable clamping of workpieces. The heavy-duty construction and base ensure high stability during operation. The machine is also equipped with a cooling system and an emergency stop switch. Technical specification Parameter Value Model ZX7045B VARIO Max drilling capacity 45 mm Max face milling diameter 80 mm Max vertical milling diameter 32 mm Max tapping capacity M12 Spindle taper MT4 Spindle travel 130 mm Spindle speed 100 – 3200 rpm Speed control variable Max distance spindle–table 450 mm Distance spindle axis–column 286 mm Table travel X 580 mm Table travel Y 200 mm Table size 800 × 240 mm Head tilting ±45° Motor power 2.2 kW Power supply 400 V Machine dimensions 860 × 740 × 1200 mm Weight 375 kg Delivery to the customer is possible. Shipping cost is calculated individually by the transport company. If you are interested in other machines, please visit our website.

Year of construction: 2021, condition: new, functionality: fully functional, A used one is for sale Felder Milling machine F-900 Z with tenoning and slotting table length 1300mm The machine is inot used at all and therefore in mint (new) condition. Technical data: - 5 milling speeds - Milling spindle swivels 90° - 45° Klsdpsy Iyvnefx Afpet - Milling stop for tools up to Ø 230mm - Multi-adjustment system - Tapping and slotting table 1300mm - electrically height-adjustable + swiveling "PowerDrive" - Engine power 7,3kW SD start

Condition: excellent (used), Year of construction: 1999, Type: AKF 250L Motor: 400V 2,2kW Speed: 2800 rpm Kledpfx Aett Eb Sofpet Cutter O: 250mm Cutter holder shaft O: 40mm Milling width: 300mm Milling depth: 85mm Profile height: 160mm Weight: approx. 150kg Dimensions W x H x D 950 x1450 x 930 mm

Condition: excellent (used), Type AKF 6/250 Motor 400 V / 3.0 kW Kedpeuf E R Ijfx Afpelt Speed 4500 rpm Cutter Ø 250 mm Cutter holder shaft Ø 40 mm Milling width 305 mm Milling depth 80 mm Suction nozzle 80 mm Weight 210 kg

Condition: excellent (used), Year of construction: 2001, spindle speed (max.): 12,000 rpm, Copy router Power (kW) 1.5 Voltage (V) 400 Operating pressure (bar) 7 Klsdpfx Afetqytiopot Milling motor speed (min-1) 12,000 Max. Workpiece cross-section W x H (mm) 200 x 100 Milling area L x W (mm) 315 x 130 Immersion depth (mm) 200 Machine dimensions L x D x H (mm) KF 347 = 1,260 x 820 x 1,650 Weight (kg) approx. 350

Condition: good (used), Year of construction: 1982, functionality: fully functional, Table dimensions: 1400 x 1000 mm Table rotates from 0 to 360 degrees Spindle taper: ISO40 Spindle swivels Minimum spindle speed: 90 rpm Maximum spindle speed: 2880 rpm Machine height: 3260 mm Machine length: 2650 mm Machine width: 2600 mm Machine weight: 5100 kg Accessories, equipment: - Built-in rotary table - Rapid traverse Kedpfx Aoy Iwf Hjfpjlt - Motorized height adjustment - Machine light The machine is in very good condition.

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 108/1008-3, functionality: fully functional, power: 4 kW (5.44 HP), total length: 1,750 mm, total width: 1,500 mm, total height: 1,450 mm, overall weight: 750 kg, workpiece width (max.): 180 mm, number of spindles: 2, TECHNICAL DETAILS Number of spindles: 2 Max. workpiece width: 180 mm MACHINE DETAILS Main motor power: 4.0 kW Klsdpfxsy Tnits Afpst Dimensions & Weight Dimensions (L x W x H): 1,750 x 1,500 x 1,450 mm Net weight: 750 kg EQUIPMENT CE marking

Condition: good (used), Year of construction: 2002, functionality: fully functional, Profile machining center, portal milling machine Type: MBZ 72/80-3 Ksdpfx Afjy S Hazspjlt Year of manufacture: 2002 Condition: used Technical data: x-axis: 7000mm y-axis: 1000mm z-axis: 370mm Spindle drive: 6.8KW Spindle speed: 20,000 RPM Tool holder: SK30 Pull stud: DIN 69872 Tool changer: 12 Special equipment/accessories: – Vögele central lubrication system – Niels minimum quantity lubrication system – Vacuum system with 8 clamping modules – 8 tool holders incl. tools – Workpiece probe incl. tool holder – Documentation

Condition: used, machine/vehicle number: 2055, up to 2000 rpm, T-slot table size 1000 mm x 400 mm, with 3-axis digital readout HEIDENHAIN Klsdpfey Sqi Hox Afpet

Condition: like new (used), Year of construction: 2021, Optimum OPTImill MZ 2S tool milling machine Ideal for training workshops!!! Available now With digital 3-axis position display DP 700 from NEWALL. With inverter drive of the feed axes controllable via the control panel. Versatile range of applications Excellent damping properties and stability of the machine frame All guides are hardened and precision-ground and can be adjusted using wedge strips Automatic feed in X-, Y- and Z-axis, infinitely adjustable via an electronic joystick on the control panel Electric feed limit stop Ball screw in all axes Central and clearly arranged control panel with integrated digital position and speed display Massive cross table, generously dimensioned and precisely surface-machined with 5 T-slots Coolant device Large handwheels with scale Machine lamp Smooth running Manual central lubrication TECHNICAL DATA Dimensions and weights Length (product) approx. 1239mm Width/depth (product) approx. 1168mm Height (product) approx. 1900mm Weight (net) approx. 1400kg Drilling/milling head Milling head swivel range ± 90 Drilling/milling capacity Cutter head size max. 100mm Drilling capacity steel (S235JR) 30mm Continuous drilling capacity steel (S235JR) 26mm End mill size max. 25mm Electrical data Drive motor power 2.2kW Supply voltage 400V Mains frequency 50Hz Horizontal milling table Horizontal milling table length 750mm Horizontal milling table width 320mm Distance vertical spindle - horizontal milling table min. 75mm Distance vertical spindle - horizontal milling table max. 410mm Horizontal milling table T-slots size 14mm Horizontal milling table T-slots quantity 5 Horizontal milling table T-slots distance 63mm Distance horizontal spindle - horizontal milling table min. 70mm Distance horizontal spindle - horizontal milling table max. 400mm Horizontal milling table max. load 285kg Vertical milling table Vertical milling table length 830mm Klodpfx Afeuqix Uepjt Vertical milling table width 250mm Vertical milling table T-slots size 14mm Vertical milling table T-slots quantity 2 Vertical milling table T-slots distance 63mm Coolant system Coolant pump(s) Drive power 95W Travel distance Manual X-axis travel 400mm Manual Y-axis travel 200mm Manual Z-axis travel 335mm Travel path X-axis automatic approx. 310mm Travel path Y-axis automatic approx. 160mm Travel Z-axis automatic 295mm Vertical spindle Vertical spindle throat depth 100mm Vertical spindle Spindle holder ISO 40 DIN 2080 Vertical spindle Speed range 50 - 1890min¯¹ Vertical spindle Number of speed ranges 12 steps Vertical spindle Tightening bar M 16 Vertical spindle Quill stroke 120mm Vertical spindle Load max. 1100Nm Feed speed Bjpvld3Hbf Feed speed X-axis 10 - 600mm/min Feed speed Y-axis 10 - 600mm/min Feed speed Z-axis 10 - 600mm/min Electrical connection Total connected load 4kW Motor(s) Rapid traverse X-axis power drive motor 0.375kW Rapid traverse Y-axis power drive motor 0.375kW Rapid traverse Z-axis power drive motor 0.375kW