Used Coolant Purification System for sale (4,062)

Year of construction: 2007, Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Ciqjkttqz8 Metal link width approx. 670 mm Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor - Coolant tank with integrated pump - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Condition: new, Functionality: fully functional, Machine/vehicle number: 347403-02, Genuine BITZER Mechanical Coolant Concentrating Bottle Level Controllers Uolc8Bkn2Z

Condition: new, liter capacity:25 l/min Pressure of coolant:80 bar rated current:13 A Clean water tank capacity:1600 l total power requirement:18 kW Ups77Npjxt weight of the machine ca.:1150 Kg dimensions of the machine ca.:2,4 x 2,0 x 1,9 m

Condition: as good as new (ex-display), Year of construction: 2019, We are offering a used as an exhibition machine type of Knoll Lubicool mobile high pressure unit for machine tool with a few operations hours. The system cleans the cooling lubricant and provides the machine with high pressure. The unit only was used for short test period. Description: The transfer pump pumps the dirty CL from the machine tool into the compact filter The compact filter seperates chips and the soiling from the CL, which flows in the clean media tank The dirty fleece is collected in the sludge container The high pressure pump provides the machine tool with cleaned CL through swichable outputs The integrated touchpad allows the control and visualization of the most important system parameters. It is suitable for - demanding machining processes - deep hole drilling in one move - processing with difficult materials (e.g. high-alloyed steel, titanium, copper, bronze) - original equipment and retrofitting Properties and benefits - space-saving and flexible installation - fast intallation and easy retrofitting - effective filtration via belt filter - high pressure up to 150 bar - KNOLL-Smart Connect control incl. Touchpad - LED-status light - short amortization time Equipment: - KNOLL-Compact filter KF (with filter fleece) - KNOLL-High pressure pump type: KTS 20-30-T-G (5,5 kW) - Transfer pump (0,63 kW) - Filtered fluid tank 150 l - Sludge container - Two valve blocks with a total of 8 switchable outlets - Includes interface cable to the machine tool (for Tornos Deco machines) - 400 V/50 Hz Powersupply: 400 V/50 Hz - Includes frequency converter for high pressure pump - Control: KNOLL-SmartConnect incl. touchpad and LED status light - With pipe set Dimensions: L/W/H: 1496x600x1198 mm Approx. price of new equipment: ~22.000 EUR If you are interested, we will provide you with additional information and pictures. The KNOLL Lubicool unit can be viewed at our site in Hungary at a pre-arranged time. Bei0Wuq

Condition: used, Year of construction: 2008, liter capacity 100 / 154 / 51 l control OP77A Siemens tank capacity 2800 l total power requirement 46 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,7 x 2,5 x 3,56 m Suction belt filter HSF 150 E / was operated on a grinding machine with OIL Machine supply pump 1 100L 3.5 bar Machine supply pump 2 154L 20 bar / 51L 60 bar Cooling unit OED RK-V-2 with 25kW cooling capacity Tank volume 2800L Clean tank 1050L capacity Dirt tank 1750L capacity Uksdnze3Yx Filter capacity min. 375L / max. 600L for emulsion Filter capacity max. 300L for oil

Condition: as good as new (ex-display), Year of construction: 2010, liter capacity 63 l tank 250 l E2Po7Mu Pressure power 1,5 (max. 2,5) bar total power requirement - kW weight of the machine ca. 100 kg dimensions of the machine ca. 1,4*0,6*1 m

Year of construction: 1992, Condition: used, Chip conveyor, scraper conveyor with coolant tank BMF type KF 200 K17 Ident. No.: 0495078 Order No.: 915979 Year of construction 1992 metal link width 200 mm distance of driving bars approx. 380 mm length of possible chip removal 1100/2100 mm insertion length approx. 1350 mm insertion height 370 mm insertion width 460 mm Hopper width top 400 mm hopper width bottom 170 mm Conveying height - ejection height approx. 1250 mm Motor power belt drive 0,37 kW Mains connection 400 Volt, 50 Hz - drive of the scraper chain via gear motor Sv2Mrw - Coolant tank without coolant pump Space requirement L x W x H 3800 x 1300 x 1650 mm weight chip conveyor approx. 500 kg good condition The conveyor is for chip transport of a milling machine, lathe or machining center.

Condition: used, Coolant pump Make Spandau Type PMS 7 A immersion depth 350 mm Pump diameter 95 mm total length 515 mm 2750 rpm 3Jpmhrkj 220 - 440 Volt 0,32 kw 96 litres per minute at 1 metre feed height

Condition: new, liter capacity:25 l/min Pressure of coolant:80 bar rated current:13 A Clean water tank capacity:1300 l total power requirement:14 kW weight of the machine ca.:680 Kg dimensions of the machine ca.:2,0 x 1,1 x 1,8 m We are importers for FRASCARA high pressure coolant systems Frascara delivers compact, mobile and reliable high pressure coolant / filtering systems with 50 or 70 bar 21 l/min. We can provide up to 3 pressure levels controlled by M-Functions. Oil operated systems are available also. Areas of application: Cleaning of coolant lubricants, emulsions and cutting oils without filter residues. Installation on machine tools for individual machines Function: The lifting pump inside the machine tank with minimum 2bar / 20 l/min capacity presses the contaminated water through the twin filter unit into the clean water tank. of the Frascara unit, from where it is pumped back through the spindle by a 50 bar pump. When the filters are getting clogged, an alarm is triggered and the operator switches to the second filter bank. The first set of filters then can be cleaned while the system is in full operation. The filters are made of wire mesh and can be reused. Bei0H9Y The system is very quiet and extremely reliable!

Condition: good (used), I sell, spandau 380v coolant pump. Dppvif

Condition: used, Year of construction: 2007, liter capacity 100 / 154 / 52 l Control OP77A Siemens D7Vzjqs tank capacity 2800 l total power requirement 46 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,7 x 2,5 x 3,56 m Suction belt filter HSF 150 E / was operated on a grinding machine with OIL Machine supply pump 1 100L 2.5 bar Machine supply pump 2 154L 20 bar / 52L 60 bar Cooling unit OED RK-V-2 with 25kW cooling capacity Tank volume 2800L Clean tank 1050L capacity Dirt tank 1750L capacity Filter capacity min. 375L / max. 600L for emulsion Filter capacity max. 300L for oil

Condition: used, liter capacity 350 l weight of the machine ca. 0,2 t dimensions of the machine ca. 1300x900x1000 m Ukwbfdf9S7

Condition: new, Year of construction: 2018, liter capacity 20550/42 Grad Qa coolant R134a/1430 Refrigerant pressure 20 bar total power requirement 14,5 kW weight of the machine ca. 186 kg dimensions of the machine ca. 0,5x0,5x2,1 m Gxcykim

Condition: new, Coolant mixer Make Hebro Cak77W0Bap type ND 2305 unused in closed original packing flow rate at 4 Bar/20 L/min. 2 Bar 14 L/min

Condition: repair required (used), Year of construction: 2000, Functionality: limited functionality, Machine/vehicle number: 40 4009.2601.0800, Type of input current: three-phase, Input voltage: 380 V, Total width: 1,600 mm, Total length: 2,200 mm, Total height: 2,400 mm, Delivery head: 1,500 mm, Tank capacity: 900 l, Overall weight: 350 kg, Volume flow: 12.6 m³/h, Pump capacity: 210 l/min, Input current: 16 A, Input frequency: 5,060 Hz, Pressure: 15 bar, Operating pressure: 10 bar, Noise level: 70 dB, Operating temperature: 22 °C, Ambient temperature (min.): 18 °C, Frequency: 50 Hz, Ambient temperature (max.): 26 °C, Filter area: 0.4 m², Filling capacity: 210 l/min, Tank is basically functional, but must be reassembled or used as a spare part. There is always about 150 liters left inside, but no problem with circulation. Very sturdy construction E2Pqgqi

Condition: used, Container capacity: 75 l Coolant pump, immersion depth: 110 mm 1 fan each for the heat exchangers electrical connection: 380 V Vprcumspm space requirement: 650 x 400 x 900 mm Weight: 32 kg

Condition: like new (used), Year of construction: 2013, Functionality: fully functional, Total width: 1,130 mm, Total length: 1,750 mm, Studer Favorit coolant tank with pump and with automata paper transfer. Used, but in very good conditions. You can work with it immediately. Delivery conditions: EXW Székesfehérvár, Hungary. Total width: 1130 mm. Total length: 1750 mm. Hu0Rwj0 Name of the product: Studer Favorit coolant tank Producer: ARO Technologies AG Model: Studer Favorit coolant tank Year of production: 2013

Year of construction: 2022, Condition: ready for operation (used), A Ruez cooling lubricant system as good as new is available. Capacity: 34720l, filling volume: 32710l, usable volume: 22020l + clean tank volume: 6000l. Level indicator: OWE 2C, inlet/distributor: screen basket, machine dimensions X/Y/Z: approx. 7400mm/2800mm/6000mm. Including integrated sludge scraper and chip conveyor. Including two-part Ruez lamella separator, Ruez safety trough, clean tank, Ruez magnetic roller filter, chip cart superstructure. Without belt filter and sediment system. Documentation available. On-site inspection is possible. Dppc9P

Condition: good (used), Year of construction: 2004, Manufacturer: Faudi Type: KA1-1404 Capacity: 2,250 liters/minute Pump performance: 3 x 1200 liters/minute; 5 bars Tank size: 24.5 m³ Safety pit: 26.5 m³ Max filtered particles: 60 microns Liquid: Emulsion Cf300Mmpwv Weight: 7 tons

Year of construction: 2010, Condition: excellent (used), Coolant pump Make Optimum Canister : 370 x 250 x H.170 mm Type 3352001 Motor 32 W/400 V -50 Hz min.2800 Amp.0,08 Bhhywxqtvq Series BJ 201006

Condition: used, 7 SK 50 tool holders with coolant ring . . 4 holders with drill tools : Ccbxrb8 1 x 50 mm 1 x KOMET KUB 2 / 2 / 58 = 60 mm 1 x 70 mm 1 x 75 mm . . 2 pieces holders : for shank diameter : 40 mm / 40 mm

Condition: good (used), Flow rate differentiated by 2 speeds available Ihitttd Delivery head depending on pump speed Immersion depth: 180 mm Flange-Ø: 100 mm Connection outlet: 5/4". 2 speeds by pole-changing motor: 1400/2800 rpm electrical connection: 380 V, approx. 0,5 kW

Condition: excellent (used), Submersible coolant pump Immersion depth: 350 mm Delivery rate: 292 l / min Delivery height: 1000 mm Flange Ø: 140 mm Outlet connection: 5/4 " Speed: 2700 rpm electr. Connection: 240/400 V, 0.9 kW Required space: 300 x 200 x 620 mm high Weight: 9 kg Ngslb

Condition: ready for operation (used), Immersion depth: 550 mm Delivery rate: 292 l / min Delivery head: 1 m WS Flange Ø: 140 mm Outlet connection: 5/4 " Speed: 2700 rpm Ccppnm08U electr. Connection: 400 V, 0.6 kW Total length: 800 mm

Condition: ready for operation (used), Immersion depth: 550 mm Delivery rate: 292 l / min Byuwy9Fjgo Delivery head: 1 m WS Flange Ø: 140 mm Outlet connection: 5/4 " Speed: 2750 rpm electr. Connection: 345 - 420 V, 0.85 kW Total length: 800 mm