Used Cop Glasse Machine for sale (68,984)

Year of construction: 2020, condition: like new (used), horizontal glass washing and drying machine made in China . max. working width : 2000 mm min. glass size : 400 x 400 mm Hnsdpfxey R Dw Ie Ah Sst glass thikness : 3 - 25 mm working speed : 1 - 10 m/min. blower power : 15 Kw total power : 42,5 Kw brushes : 3 pairs bristle diameter of hard brush : 0,25 mm bristle diameter of soft brush : 0,08 mm brush shaft diameter : 75 mm roller diameter : 75 mm water tank : 4 units air knives : 2 table height : 900 +/- 50 mm net weight : 4300 kg machine sizes : L = 5680 mm , W : 4744 mm , H : 3287 mm

Condition: used, • Throughput capacity: up to approx. 50 liters/minute • Tank volume: 0.3 m2 • Tank material: polyethylene (UV-stabilized) Hnsdpfx Ahsywizxj Set • Sedimentation granulate Sediflock: powder form (according to manufacturer specifications) • Sludge bag approx.: 70 kg • Compressed air: 6 bar • Power connection (depending on pumps): 2 kW, 400 V/50Hz – 3NPE • Dosing of sedimentation granulate: automatic • Serial number – B085.23 • Further information can be found below • Price on request

Condition: good (used), With extended roller table • Type – SILIKANT – 2500 • Serial number – 7609 1-12 • Year of manufacture – 2001 • Belt size – 100 x 2500 • Roller table (total length) 4.10 m × 0.55 m • Center section – 1.20 m • Sides 2 x 1.45 m • Height – 1.02 m • Price upon request Hedeuqlc Nspfx Ah Ssnt

Condition: good (used), Year of construction: 2003, System with water basin and pumps, Total depth with water basin 1400 mm Total length: 8100 mm, Height: 2500 mm, Working direction: right to left Hedot Ah Acjpfx Ah Ssnt

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Vertical glass drilling machine, 1500 x 3000 Max. glass size: 1500 x 3000 mm Glass thickness: 3 – 20 mm Drilling diameter: 3 – 100 mm Control: NC controlled Drilling heads: 2 opposing drilling spindles (front and rear) Hodpfx Ahjy Nltnj Ssnt Spindle speed: Adjustable via inverter Total floor dimensions: 7500 x 2200 x 2800 mm Excellent condition Good working order, tested As is Available immediately

Condition: good (used), - Year of manufacture 12/77 Hjdpfxer Nvgns Ah Sont - Serial number: 3241 - Belt size 100 x 1830 mm - Dimensions 1650 x 1200 x 100 mm (HxWxD) Price on request

Condition: used, Copy Milling Machine DECKEL Model: KF 1 Machine No.: 61510 Year of manufacture: 1981 Weight approx.: 1 t Hnedpfx Ahjz A Hmwe Sst

Condition: new, Year of construction: 2011, functionality: fully functional, input voltage: 24 V, Lisec catalyst pump for 20 liter drums, complete unit. Can be used for PS as well as PU with paste catalyst Sold EXW our warehouse in Hungary Hedpfxewuq Ubs Ah Sont

Condition: excellent (used), Year of construction: 2016, MBR RADOVANOVIC WSR-27 Maximum glass height: 2700 mm Working direction: from left to right (L-R) PLEASE NOTE Machine excluding inlet and outlet conveyors Very good and clean condition Good working order Available immediately Hnjdpeq Ih Nyofx Ah Set

Condition: good (used), Extremely stable and heavy-duty sanding machine suitable for daily and continuous production. The machine is designed for durability and precision thanks to its robust and first-class materials. - Type: 111F - Serial number: GG111F-22160 - 11 spindles - Year of construction: 2016 - Glass thickness: 3 - 50 mm Hodpfxoq Dp Dxe Ah Sent - Min. dimension 40 x 40 mm - Machine dimensions: 11250 x 1800 x 2700 mm - Sanding profile: Flat edge with seam - Number of wheels o 3 diamond wheels edge o 1 diamond wheel rear edge o 1 polishing wheel rear edge o 1 diamond wheel front edge o 1 polishing wheel front edge o 4 polishing wheels edge - Operating pressure: min. 6 bar - Working height: 800 mm - Weight: 3,600 kg - Machine control via central display - Running direction: right - left - Feed speed: 0.6-6 mtr./min. - Connected loads: 400V, 50 Hz, 10A - 2x available - Machine was operated with central water treatment, is sold without water tray and pump.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 6,500 mm, total width: 1,400 mm, total height: 2,500 mm, overall weight: 2,800 kg, input current: 32 A, The Enkong ZM9 is a high-performance glass edge grinding machine with 9 spindles, designed for the precise grinding and polishing of straight edges and 45° bevels on glass panes. Thanks to its robust construction and modern control technology, the machine impresses with its high precision, durability, and user-friendliness. Whether in the architectural glass, furniture, or industrial glass production – the ZM9 offers a reliable solution for the efficient processing of glass while meeting all European safety and quality standards (CE compliant). Features: - 9 spindles for grinding and polishing straight edges and 45° bevels - PLC control with touchscreen display: simple adjustment of glass thickness, targeted control of individual motors, pneumatic raising and lowering of polishing motors - Infeed and outfeed conveyor belt with timing belt for maximum transport accuracy and smooth operation - Stable machine body made of solid cast iron – low vibration and long service life - Operation and documentation completely in German - Central, oil-based lubrication system for low maintenance - Electrical components according to ISO/DIN standards – European standard quality - Glass thickness sensor with automatic safety shut-off in case of incorrect glass thickness - Automatic mode with on/off switching of individual polishing discs - Stainless steel water tank with integrated pump - Running direction from right to left Hnsdpfx Ahsyzfimo Sjt - CE conformity guarantees the highest safety and compliance with standards Technical data: Number of spindles 9 pcs Min. glass size 80 × 80 mm Processable glass thickness 3–25 mm Processing speed 1.26–6.0 m/min Weight 2800 kg Installed power 19.08 kW Dimensions (L × W × H) 6500 × 1400 × 2500 mm Chamfer 45° The special price includes delivery, customs clearance, and all mentioned options and incidental costs (delivered duty paid to destination in Germany). Available expected in October 2026.

Condition: used, Year of construction: 2006, functionality: fully functional, Fully renovated, repainted drilling machine. Guides, bearings, compressed air pipes has been fully changed. Hodpfxoxz Ez Hj Ah Ssnt

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Horizontal glass washing machine TRIULZI SY 2600 6.3.6 Hnodsx Ecwmjpfx Ah Sjt Year of production: 2007 Maximum working width: 2600 mm Minimum glass size: 180 x 250 mm Glass thickness: 2 - 35 mm Working speed: 2 - 8 m/min (by inverter) Washing machine consists of: - inlet conveyor approx. 1000 mm long, - pre-washing, - 3 pairs of brushes (6 pcs.), - 3 pairs of air drying knifes (6 pcs.), - 3 water tanks (two with heating), - outlet conveyor approx. 1400 mm long. Total length approx.: 6900 mm Very good and clean condition As is Available immediately

Condition: good (used), - Type: 1300A - Serial number: 951313V - Open top - Dimension: - Total length: 4900 mm Hnsdeq Ec D Tspfx Ah Sjt - Depth 1100 mm - Height 2300 mm - Washing machine 2100 mm - Inlet 1400 mm - Outlet 1400 mm - Washing height: 1500 mm - 2 pairs of brushes - Connected loads: 380V, 50Hz, 11kW - Price on request

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, Horizontal glass washing machine BENTELER tecLine 25/3 Year of production: 2003 Hsdpfx Ahjx Ecv Ae Ssnt Maximum glass working width: 2500 mm 3 pairs of brushes (6 pcs.) Very good and clean condition As is Available immediately

Condition: good (used), Year of construction: 1991, Glass drilling machine with table (extendable) 1. Width: 900 mm 2. Width: 1800 mm / with arms extended Height: 1600 mm Depth: 1200 mm Condition: good, second-hand Hjdpezfhd Eofx Ah Sent

Condition: good (used), - Recessed grip grinder - Year of construction 1981 - Dimensions 1750 - 2300 x 1500 - 2700 x 800 mm (HxWxD) Hnedpjr Nviujfx Ah Sjt Price on request

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, total length: 11 mm, total width: 2,500 mm, total height: 3,500 mm, working height: 520 mm, input voltage: 400 V, overall weight: 6,000 kg, type of input current: three-phase, power: 60 kW (81.58 HP), Lisec glass washing machine VHW-25V8, year 2002, working direction left/right, with 8 brushes for low-e, including following: - inlet conveyor (3,3 m) maker MBR (Maschinenbau Radovanovic) - Glass washing machine VHW-25V8 - outlet conveyor (4,4 m), maker MBR Hjdpfezq S A Nsx Ah Sjnt - 2 hot water tanks - 2 sandfilter - 1 blower The machine is in very good working order and is available from current location in Germany by the end of October

Condition: good (used), - Type: FP 6 glass grinding machine with 6 spindles - Serial number: 22 - Year of construction: 2002 - Glass thickness: 2 - 25 mm - Min. glass dimension: 80 x 200 mm - Machine dimensions: 5200 x 1200 x 2800 mm - Weight: 1500 kg - 2 diamond wheels for edge - 2 polishing wheels for edge Hnjdpfx Ahjq Dzpvj Sjt - 1 combined wheel each for front and rear seam - Connected loads: 380V, 50Hz, 8.8 kW - Offer price 4.500 € free truck loaded

Condition: used, Year of construction: 2005, Multifunction centre for machining glass, INTERMAC Type Master 23, year 2005 (1700 operating hours) Hnedox Iuhropfx Ah Sjt

Condition: used, Year of construction: 2005, Used straight-line edging machine, BOTTERO Type 108 F, manufactured in 2005. Hsdpjza Amrjfx Ah Sjnt

Condition: used, Year of construction: 2017, machine/vehicle number: O3pl, functionality: fully functional, power: 0.75 kW (1.02 HP), input voltage: 230 V, input frequency: 60 Hz, type of input current: AC, rip fence adjustment: manual, actuation type: pneumatic, rotational speed (max.): 12,000 rpm, rotational speed (min.): 12,000 rpm, table width: 330 mm, table length: 2,400 mm, total length: 2,600 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 540 kg, PEMAC 03PL 3-head copy milling machine – Year of manufacture 2017 – Ready for immediate use Very well-maintained PEMAC 03PL copy milling machine for aluminum profiles, manufactured in 2017. The machine has always been used in a commercial setting, has been well-maintained, and is in fully working condition. Inspection and test runs are possible. Hnodpfx Aezlar Ush Sot Specifications Year of manufacture: 2017 230V (1-phase) 3 milling heads Spindle speed: 12,000 rpm Working pressure: 6–7 bar Weight: approx. 540 kg Included 35 used and new milling cutters Video of the machine in operation available Optionally available: Tekna TK280 punching machine (2012) Compressor Asking price: €6,500. Serious offers will be considered.

Condition: used, • Technical Data: • Washing width – 2800 mm • Support height – 900+/-30 mm • Min. glass dimensions – 360 x 300 mm • Max. glass dimensions – 4800 x 2800 mm • Glass thickness – 2-19 mm • Transport speed – 2-13 m/min • Operator side – left • Adjustable upper frame height extendable up to – 400 mm Hedpfx Ahsw Adn Rj Sont • Number of spray units – 2 pcs • Number of washing units – 2 pcs • Number of drying units – 5 pcs • Brush roller adjustment – pneumatic • Machine width – 3760 mm • Machine length – 3480 mm • Machine height/with blower platform – 1480 mm / 3900 mm • Price on request

Condition: reconditioned (used), Year of construction: 2006, operating hours: 35,435 h, functionality: fully functional, total length: 5,940 mm, total width: 1,800 mm, total height: 2,400 mm, year of last overhaul: 2023, Completely overhauled by the main dealer with genuine parts in 2023. Was hardly used, and looked after throughout. Hnedpfovw At Ajx Ah Sjt The machine has been hardly used and it is fully operational and ready to go. Transport is not included, but can be arranged for a fee. Subject to location.

Condition: used, functionality: fully functional, FOREL Insulating Glass Line - Washing Machine (6 brushes, Low-E) FOREL VW2500 (2009) Max Height: 2500 mm Hsdpey If Ayjfx Ah Ssnt Min. Dimensions: 310x160 mm Thickness: 3-40 mm - Scanner LISEC (2014) - Gas Press FOREL APG 250 (2009) Max. Dimensions: 2500x4500 mm Min. Dimensions: 190x320 mm Max Manual Opening: 69 mm Working Direction: Right to Left