Used Copy Attachment for sale (5,619)

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm Conventional lathe with copying attachment and extensive accessories Turning diameter over cross slide: 240 mm Bedpjv Rgzwofx Abtowt Spindle bore: 52 mm Turning diameter: 360 mm Center height: 180 mm Turning length: 1,000 mm Overall length: 2,200 mm Overall width: 750 mm Overall height: 1,400 mm Maximum spindle speed: 1,750 rpm Min. spindle speed: 60 rpm Total weight: 1,800 kg All technical specifications are subject to change without notice. Deviations may occur depending on the year of manufacture, model, or condition of the machine. We assume no liability for the accuracy or completeness of this information.

Condition: excellent (used), Webster & Bennett 72" Elevating Rail Vertical Turning Lathe with copying attachment 72" diameter table Bsdpfx Abezh Ndfetewt Can be shown demonstrating at our premises if required.

Year of construction: 1970, condition: used, functionality: unexamined, ZANGS card copying machine for Verdol 1344 / 896 / 448 circuit boards For sale is an original ZANGS card copying machine for Verdol cards or circuit boards. Suitable for: Verdol 1344 circuit boards Bwjdpfx Abozvgfietst Verdol 896 circuit boards Verdol 448 circuit boards Year of manufacture: unknown, presumably around 1970 Dimensions: Length: approx. 150 cm Width: approx. 125 cm Height: approx. 160 cm Weight: approx. 900 kg Electrical connection: 400 V three-phase current Motor power approx. 1.5 kW Special feature: The machine has 2 cylinders for reading the patterns. Condition: The machine has been out of operation for several years and has not been tested for functionality recently. It is complete and in good condition. The visual condition can be seen in the photos. Spare parts are available and will be included with the machine. The machine is particularly suitable for weaving mills, textile companies, owners of older Verdol Jacquard machines, and as a spare or backup machine. Inspection possible by appointment. Due to the weight of approximately 900 kg, only collection or transport by arrangement is possible. Sale in its current condition as shown in the photos.

Condition: used, Year of construction: 2010, - Release agent application, top and bottom - Scoring saw with 2.2 kW motor Bodpjzuyqijfx Abtjwt - Trimming unit with 8.0 kW motor - Double milling unit with 2 motors, each 4.5 kW - Gluing unit - End trimming unit - Flush trimming unit - Multi-function unit - Multi-profile edge trimming unit - Spray nozzles, top and bottom - Flat edge trimming unit - Buffing unit - Grooving unit Double-sided edge banding machine Manufacturer: IMA Type: Combima/II/390/B/L12 Year of manufacture: 2010 For longitudinal and transverse feed - 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long, rubber-coated chain plates, with cams - Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm. ICOS OPEN control system - Max. feed width 3,300 mm - Program-controlled master + slave width adjustment - Fixed stop on the left in feed direction Workpiece dimensions - Min. feed width 244 mm (for longitudinal processing) - Max. workpiece width (chain extension) 1,300 mm - Min. workpiece thickness 8 mm - Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying) Edge material: - Min. height 14 mm, max. height 65 mm - Roll material min. thickness 0.3 mm, max. thickness 3 mm Strips and edgebanding: - Min. thickness 0.8 mm, max. thickness 12 mm Feed speed - 10 - 50 m/min. with frequency-controlled drive. Infeed device - with 5 top-mounted, inclined and driven rollers. Center support with roller track - automatically lowerable and automatically centering. Equipped on each side with: Release agent application, top and bottom Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM. - Electronic positioning for stepless horizontal adjustment. Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Gluing unit for hot melt adhesive - With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm - 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine) - Horizontal roll holder End trimming unit - Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz - Pneumatic swivel 0 + 25 for straight and miter cuts. - Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min. Flush trimming unit 08.0555 - With 2 motors 1,850 W, 200 Hz, 12,000 RPM. Multi-function unit 08.353 - NC controlled with 2 motors, with automatic tooling for 4 profiles. Multi-profile edge trimming unit - with automatic tooling for 4 profiles via fixed-point control Spray nozzles, top and bottom - for applying cleaning agents Flat edge trimming unit Buffing unit - With 2 motors, each 180 W, 50 Hz, 1400 RPM. 1 Grooving unit - With 4.5 kW motor, 150 Hz, 9,000 RPM. - Horizontal and vertical adjustment manually with mechanical digital display - Pneumatic activation control - Manual swivel 90 ICOS open - PC-based control system with integrated PLC and electronic path control. - User-friendly interface with Windows standards - Simple, component-oriented

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, sheet thickness (max.): 3 mm, working length: 2,500 mm, TECHNICAL DETAILS Sheet thickness with tensile strength of 410 N/mm² max.: 2.00 mm Sheet thickness with tensile strength of 600 N/mm² max.: 1.25 mm Sheet thickness with tensile strength of 265 N/mm² max.: 3.00 mm Minimum sheet thickness: 0.50 mm Length of the notched plate at the inlet max.: 2,700 mm Width of the notched plate at the inlet max.: 1,500 mm Rotatable diagonal of the notched plate max.: 2,700 mm Bending length max.: 2,500 mm Clearance for bending above the work table max.: 127 mm MACHINE DETAILS Processor: Intel Pentium III, 500 MHz RAM: 128 MB SDRAM Graphics memory: 4 MB SGRAM Hard disk capacity: 9.1 GB CD-ROM drive: 600 MB Floppy disk drive: 3.5 inch, 1.44 MB Network cards: 2 Screen diagonal: 17 inches Voltage: 400 V Bodpfx Aozv Rc Sjbtswt Frequency: 50 Hz Number of phases: 3 Rated power: 38 kW Rated current: 64 A Switching capacity of the main switch: 40 kA Further technical details can be found in the attached documents.

Year of construction: 2017, condition: good (used), Railway lahte HOESCH MFD - DRH 1400 N2D MACH-ID 9089 Make: HOESCH MFD Type: DRH 1400 N2D Control: SIEMENS 840D Year: 2017 Doubled support carriage Bodpfx Ajwb Aq Ujbtjwt CNC controlled measuring and correction probe Chip conveyor internal and external clamping jaws (wheel clamp in and out) overhauling cost 850k EUR Under power free 02.2026 Rail track gauge: 1435mm Max. wheel tread Ø: 1600mm Min. wheel tread Ø: 200mm Max. axle length wheel set:2065mm Face plate Ø: 1400mm Number of slides: 2 Sjablone copy attachment: 2 Power: 55+55kW Length: 9200mm Width: 6800mm Height: 3800mm Weight: 47000kg

Condition: used, Year of construction: 2002, functionality: fully functional, overall weight: 2,100 kg, power: 25 kW (33.99 HP), Industrial copy shaping machine P. BACCI FC2 1600. Manufactured in 2002, weight 2100 kg, power 25 kW. Designed for woodworking (solid wood, furniture components). Bwedszi N Awopfx Abtet The machine comes with an Ecosis Soundproof Enclosure (Model CSF) from 2002. Current condition: The machine is dismantled and located in our warehouse. Key Features: Weight: 2100 kg Power: 25 kW Pneumatic vertical clamps Control panel with adjustable feed rates Cutter head with interchangeable HM inserts included

Year of construction: 2004, condition: used, Speed: 12,000 revolutions per minute Pneumatic material clamping via foot switch Minimum quantity spray device Bodezyapcopfx Abtjwt Milling area: 300 x 120 mm Hub: 115 mm Weight: approx. 200 kg

Year of construction: 2012, condition: used, Attachment suited for: Loading and unloading machines Bwodpfx Aboydmzuetst Please contact Sales Team for more information

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Bjdjzd Uv Eopfx Abtowt Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Bwodsy Ufk Rspfx Abtjt Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Condition: good (used), Year of construction: 1981, Wedge snowplow, snow plug, dozer blade, clearing blade, snowplow, snow pusher -Manufacturer: Schulte-Henke, Snowplow type RKS 200 DFG 4035 A -Sign length: 2000 mm -Plow height: 520 mm -with: Spring-loaded flap drive-over system Bwjdpfx Absqxvwyetst -Recording: Dimensions see photo technical drawing -Plow: mechanically adjustable -Attachment: to forklifts or similar -Transport dimensions: 2000/800/H660 mm -Weight: 230 kg

Condition: like new (used), Year of construction: 2000, machine/vehicle number: 1780020742, functionality: fully functional, The machine was used very little. Top routing unit: Cutting range using stops or copy templates 340 x 100 mm Travel 110 mm Bottom routing unit: Cutting range using stops or copy templates 240 x 85 mm Travel at front 95 mm Travel at back 45 mm Bwodpfxjzmn N Rj Abtjt Spindle speed 12,000 rpm Clamping range for profiles 115 x 100 mm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 980 mm, depth 1,250 mm, height 1,610 mm, weight 360 kg

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 33 432, Two-spindle copy milling machine, Elumatec KF 78 / 60 Bwsdpfx Aoy Sxr Njbtst used & fully functional For processing aluminum or steel profiles With vertical and horizontal milling motor, spray device and pneumatic clamping device Technical data (according to Elumatec): Profile height: 60 mm max Milling range, horizontal: 180 x 70 mm Milling range, vertical: 300 x 95 mm Stroke: 110 mm Drilling speed: 6000 rpm Milling speed: 12000 rpm Dimensions (H x W x D): 160 x 280 x 110 cm Weight approx. 260 kg

Condition: excellent (used), CATALOGUE NUMBER: 6901 TECHNICAL DATA - Max. turning length: 1200 mm - Max. turning diameter: 210 mm - Max. turning diameter with standard support: 90 mm - Max. dimension of square material for turning with automatic feed: 100 mm - 3 hydraulic copying units - Additional 3 cutting tools on hydraulic pistons (2 installed) - 4 types of spindle rotation - Automatic or manual machine operation - Spindle motor: 9 kW - Hydraulic pump motor: 3 kW - Diameter of extraction nozzle: 90 mm - Dimensions for transport (L/W/H): 3700x2100x2000 mm - Weight: approximately 3000 kg ADVANTAGES - Made in Italy - Automatic hydraulic copying unit - Original DTR documentation Bodpfozu R S Rex Abtswt - Unpainted - Used lathe, very good condition Net price: 57,900 PLN Net price: 13,786 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Year of construction: 1994, condition: used, 3-spindle copy milling machine with stops for aluminum and plastic profiles Bsdjzvmyyspfx Abtewt Maximum spindle speed: 12,000 r.p.m. Stop arms right and left Good condition

Condition: used, functionality: fully functional, Year of construction: 2006, machine/vehicle number: CG017, Cutting width: 815 mm Mounting console, bolting: 352 mm Gearbox incl. hydraulic motors Transverse cutting heads incl. round chisel RM8 Hydraulic connection lines consisting of: Bwedpfxoyk Sfxj Abtjt Supply/return: approx. 2 m (S25) Leak oil: approx. 2 m (L18) Operating pressure: max. 320 bar Flow rate: max. 250 l/min Application area: rock up to max. 70 MPa Incl. mounting plate for construction machinery technology Suitable for carrier device Liebherr R914

Year of construction: 2019, condition: like new (used), functionality: fully functional, machine/vehicle number: 178000012, Machine in new condition, barely used. Bwjdpfxjzk Ndqs Abtst

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 232657 SZ. 281, overall weight: 2,400 kg, total width: 1,350 mm, total length: 1,200 mm, total height: 2,400 mm, type of input current: three-phase, input voltage: 400 V, year of last overhaul: 2023, Refurbished eccentric press from a traditional blacksmith's workshop. An eccentric press manufactured by Ganz and Társa in 1897, now in fully refurbished condition, is for sale, complete with a set of rare cutting tools. During the refurbishment, the following parts were replaced: - Main shaft grey cast iron bearings - Drive shaft - Drive shaft bronze bearings - 3 locking pins Bsdpozt Dmfsfx Abtjwt - All protective covers - Complete repainting (with the cast surface pre-cleaned by shot blasting) The cutting tools can still be used to create various leaf and flower patterns, which are then shaped into their final form by hand. This process allows for the traditional production of completely unique shapes that are no longer available commercially. The machine has a unique historical background, and I can share more information and archival images with the buyer.

Condition: ready for operation (used), Romanian CFL 5000 Nominal weight of falling part – 5000 kg Max. stroke – 1700 mm Impact energy – 17000 kg-m Daylight between columns – 3900 mm Number of impacts – 40/min Weight approximately 170 tons Video showing the machine in operation available! Romanian CFL 3150 Nominal weight of falling part – 3150 kg Max. stroke – 1250 mm Impact energy – 80 kJ Daylight between columns – 4000 mm Number of impacts – 45/min Bsdpfx Ajy Ud N Sebtowt Weight approximately 87 tons Video showing the machine in operation available!

Condition: used, CATALOGUE NUMBER 7650 Bwedoztrfcjpfx Abtst Technical data: - max. working length 1500mm - max. working diameter 250mm - milling (disc milling cutter) 7.5kW - spindle – 2800 rpm, 3kW - spindle speed 700/1200/1500/2000 rpm - grinding unit 0.75kW - hydraulic motor 3kW - total power 17.75kW - air consumption 6-8 bar - infeed conveyor for workpieces up to 150x150mm - diameter of dust extraction nozzle 100mm, 160mm - dimensions for transport (length/width/height) 4350x2300x1980mm - weight approximately 3000kg ADVANTAGES - made in Germany - automatic hydraulic copying system - original DTR documentation - unpainted - used lathe, very good condition Net price: 59900 PLN Net price: 14262 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: used, Bomag BPR 50/55 D | Used Attachment - Other 📍Location: Switzerland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 1000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Plate does not start, according to the workshop master unknown engine damage, starter turns and compression is present according to noise. Bsdpfx Abezvy Azetswt 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41268 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 2013, – 2 pneumatic clamps – 12,000 rpm – Mist lubrication system – Weight 180 kg Bodpfx Absy An U Ijtjwt – 230V

Condition: good (used), Year of construction: 1987, Wedge snowplow, snow plug, dozer blade, clearing blade, snowplow Bsdpfod S Tg Asx Abtswt -Working width: max. 1700 mm -Plow height: 820 mm -with: Spring-loaded flap drive-over system -Plow: mechanically adjustable -for: attachment to forklifts or similar -Transport dimensions: 2195/900/H1100 mm -Weight: 350 kg

Condition: used, SECOND-HAND COPYING ROUTING SHAPER AND SANDER WITH 3 SIDES CABIN Bwedswrh E Ejpfx Abtet - 1 shaping unit - 1 shaping unit - Max. working diam. 800 mm.