Used Corrugator Pipe for sale (3,196)

Condition: good (used), Profile bending machine, bending machine, pipe bending tool -Handover: in the current condition as viewed -Accessories: 1 damaged pressing tool: 3/4", see photos -suitable for: pipe size 1/2" to 1 1/2" -Dimensions: 630/670/H440 mm -Weight: 36 kg Bwsdpfegrzvgex Abzsw

Year of construction: 2010, condition: good (used), Used Stainless steel Goudsmit PM3 Pipemagnet Length 950mm Inlet and outlet 250mm Bwjdpfxsir E Hfs Abzow Maximum capacity 100m3/h

Condition: ready for operation (used), machine for expanding and reducing tubes 3 heads Bwodswrt Tzepfx Abzjw no tooling included (can be supplied on demand) Dimensions: 1500 x 2000 x 2000 mm Weight: 1600 kg

Condition: used, Year of construction: 2006, pipe diameter (max.): 35 mm, bending angle (max.): 150 °, total length: 3,000 mm, input voltage: 380 V, wall thickness: 3 mm, 2006 wafios BER35 Bwodsvftpdepfx Abzew

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, total width: 3,100 mm, total length: 2,250 mm, total height: 1,900 mm, type of input current: three-phase, overall weight: 1,345 kg, PELTOC drum winder is developed more then 10 years different pipe and hose winding solutions development experiences. There has been used only solutions what have been worked a years and been proved by self. Peltoc develop all produced machines only quality producer and all over world widely available standard components, considering on development highest service factory, minimal wear and service parts, lowest energy consumption and thanks for that we can ensure longer lifetime and more reliable solutions. Producer: PELTOC OÜ Model: HOHL 2400 Maximum drum rotation speed: 1 - 30 RPM (Option up to 200RPM) Maximum winding speed m/min: 0 - 200m/min. (Depends from drum inside diameter) Maximum full load drum weight: 1700 kg (Option up to 4000Kg) Maximum drum outside diameter: 2400 mm (Option up to 4000mm) Bwedpfxoqwg Hys Abzew Minimum drum diameter to lift from floor: 1000 mm (Option from 600mm) Maximum drum outside width: 1250 mm Minimum drum outside width: 730 mm ( Option to 300mm. Need to order extra spacers for narrower drums) Drum center hole diameter: 000 mm (For each client size) Compressed air: Not needed! Electricity: 400V / 50 Hz / 3 Faze. Machine have 16A plug Weight: 1345 Kg Dimensions: 2250 x 3100 x 1882 mm (L x W x H)

Year of construction: 2009, condition: excellent (used), IPM-TP 40 - 400 PIPE SAW for PVC PIPE Application: Cutting and chamfering PVC, PE, PP PIPES With chip extraction fan Min. diameter 40 mm Max. diameter 400 mm Year of manufacture 2009 Accessories: Various clamp jaws Machine locations: Sachal Extrusionsmaschinen Bedsvbvznopfx Abzsww D-26345 Bockhorn-Grabstede Bahnhofstraße 6 The machine is my property.

Condition: good (used), Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 9 pieces -Profile diameter: 27 to 60 mm see photos -Hole: Ø 32 mm -Shipping/Price: complete -Transport dimensions: 655/350/H120 mm -Weight: 42 kg Bwjdpfoxmirtox Abzew

Condition: new, tube diameter 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu wall strength 2.0 mm bar material - diameter 30.0 mm revolutions per minute 2.0 U/min voltage 230 Volt total power requirement 1.1 kW weight 80.0 kg range L-W-H 410 x 1000 x 570 mm ERCOLINA MediBender "MB 42 M" Bedpfx Aboxaa Sdezsww - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 1“1/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8“ gas Equipment: - patented fast tool change system - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 programs each program with up to 9 bending angles programmable - in addition, the necessary correction angles can be entered . for each bending angle in the working mode BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: ready for operation (used), machine for expanding and reducing tubes Bodpfswrt Tusx Abzoww 1 head no tooling included (can be supplied on demand) Stroke: 150 mm Power: 11 kW Dimensions: 2200 x 800 x 1200 mm Weight: 500 kg

Condition: new, – Capacity: 34 x 3 mm Bwedpfxoxq Hl Es Abzow – Digitally adjustable stroke – Emergency stop switch – With 3 tool sets: 33.7 mm, 21.4 mm, 16 mm – Documentation – Weight: 80 kg – 400V

Year of construction: 2018, condition: excellent (used), The line is consisting of different producer : It is 2 layer , PE 100, pressure pipe production : 1. Three extruders (inner, outer layer and stripes) with automatic material loaders. Outer layer: LIANSU LSS 65/35, Main extruder , 350 kg/h,2018 Y Inner layer: LIANSU LSS 45/30, Co –extruder, max 40 kg/h, 2018 Y Stripes: co extruder Bsdpfx Abjuuah Uszeww 2. Extrusion die head complete with all necessary tools, die adaptors, heaters, for all dimensions 20-125mm. Lamellar calibrators up to Ø90mm, SDR 26, 17, 11, and with combinations can be produced SDR 9 and 7.4. Compete list with all tools (in attachments). 3. Vacuum tank, Periplast, year 2001, 6m length, with water-spey nozzles for cooling. 4. Additional cooling chamber, 6m length, Periplast , year 2001. 5. Unit for permanent and long term readable thermal marking, GNATA FILIPPO, Italy, type MAC 140/CCRC/AT-2. 6. Haul off, Liansu, ISPQ 110, year 2013.

Condition: new, neu ca. 2 Wochen ab Auftragse Niederlande 4417 € Bsdpfx Ajwir Dmobzsww 100 x 2.000 mm 20 - 76,1 mm 1 1 3 kW 220 kg The AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm

Year of construction: 2019, condition: like new (used), functionality: fully functional, Jutec 5045 Pipe Bending Machine – Like New – Half Price! For sale: Jutec 5045 semi-automatic pipe bending machine, year of manufacture 2019, used only for a few months. The machine is in almost new condition and immediately ready for operation. Location: Tatabánya, Hungary Price: HUF 10,000,000 net (approx. €25,000) – around half of the original price! Technical specifications: Model: Jutec 5045 Type: Electromechanical, semi-automatic pipe bending machine Capacity: Ø 6–50 mm pipes Suitable for tight bending radii, high precision Automatic central mandrel lubrication with minimal lubricant consumption Pneumatic valve control Spindle-driven frame adjustment Tooling included: • Ø 33.7 mm pipe, bending radius R = 70 mm Bwodpfexliuxox Abzow • Ø 42.4 mm pipe, bending radius R = 90 mm Condition: Hardly used, like new Fully operational and immediately available Regularly serviced, stored in a dry indoor environment Viewing by appointment. Exchange or trade-in may be considered.

Condition: used, Year of construction: 2004, Technical details: Bwedpfxju Ibzke Abzew tube diameter: 20 mm bending radius max.: 100 mm control for program: S7-300 tube pipe draw up length: 2270 mm air pressure - required: 7 bar total power requirement: 15 kW Bending speed: 540 °/sec control voltage: 24 V / DC V connection voltage: 400V / 50Hz / 3 Ph V dimensions L x W x H: Biegeaggregat: 1,8 x 1,4 x 1,6 m dimensions L x W x H: Zuführung: 1,2 x 1,5 x 1,55 m dimension machine xH: 3,0 x 1,0 x 1,2 m Mandrel tube bending machine Bending direction RIGHT Operation via SIMANTIC Panel PC control unit Pneumatics: Pressure 7 bar; flow rate 200 l/min. Hydraulics: Pressure 150 bar; flow rate 6.8 l/min. Equipment/Accessories: -oil drip tray 3.1 x 0.96 x 0.02m -Spare parts and accessories *

Condition: ready for operation (used), machine for expanding and reducing tubes 2 heads Bwjdjwrt Tnopfx Abzjw

Condition: new, Year of construction: 2024, neu 2024 9721 prompt, Zwischenverkauf v Italien 7780 € 150.15 € 1 1 42 mm 400 mm 570 mm 1000 mm 80 kg 4 cm³ 42 x 3 mm 48 x 1,5 mm 42 x 4 mm 42 x 2 mm 42 x 2 mm 50 x 3 mm 54 x 2 mm 54 x 2 mm 60 x 2 mm 50 x 4 mm 30 mm 40x20 (liegend), 40x12 (s mm 260 mm 10 mm 3,3 U/min 1.1 kW manual clamping electronic preselection of bending angle digital read our for Clamping position 30 programms with each 9 bends material spring back compensation Bwodpfxowirzfo Abzsw overload protection mobile by rolls and handle foot pedal tools not included Alternatively also available as following models (prices on request): MB 42M (single phase, 2 U/min) MB 42PM (portable, single phase, 2 U/min)

Condition: used, Year of construction: 1992, Technical details: tube diameter: 6 mm tube diameter max.: 16 mm bending angle max.: 90 ° electrics - voltage/frequency: 220 / 50 V/Hz Total power requirement: 0,75 kW Weight approx.: 0,145 t machine dimensions LxWxH: ca. 1,0 x 0,8 x 1,2 m Application: Mini tube bending machine with free bending head. Processing of precision steel tubes according to DIN 2391/C, material 35.4 NBK Ø 6 - 16mm. -With hydraulic drive -8-fold bending preselection angle up to 180 -Pipe stop length 1m -Emergency stop button -mobile with parking brake -pivoting pipe head (vertical in horizontal position) -required hydraulic oil = approx. 20 liters (e.g. Esso Nuto 32) Bedpowivn Nofx Abzjww Accessories: various bending tools *

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 10900 € 209.28 € 60 mm 595 mm 363 mm 900 mm 130 kg 10.5 cm³ 60 x 3 mm 2"Gas x 3,91 mm 60 x 4 mm 60 x 2 mm 60 x 4 mm Bwjdpfx Abowirxkjzjw 60 x 4 mm 64 x 4 mm 64 x 4 mm 60 x 4 mm 50 x 4 mm 35 mm 60x30x4 stehend, 60x40x5 mm 300 mm 10 mm 10 mm 1,25 / 2,50 U/min 1.5 kW digital read out for bending angle manual clamping material spring back compensation digital read out and zero setting for clamping point 2 speeds overload protection mobile by rolls and handle tools not included

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 39500 € 754.45 € 127 mm 850 mm 1200 mm 850 mm 720 kg 80 cm³ 127 x 7,1 mm 4" x 8,56 mm Bodpfxewirvis Abzeww 127 x 7,1 mm 114,3 x 5,6 mm 114,3 x 5,6 mm 139,7 x 8,8 mm 139,7 x 8,8 mm 64 x 6 mm 88,9 x 3,65 mm 50 x 4 mm 90 mm 130 x 25 stehend, 130 x 6 mm 700 mm 36 mm 10 mm 0 - 0,75 U/min 3.5 kW digital read out for bending angle 4 hexagonal tool holders (40, 50 80 and 110 mm) Possibility to bend left and right Users manaul Tools on request

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 29100 € 555.81 € Bwodewirvcepfx Abzjw 100 mm 500 mm 1200 mm 850 mm 480 kg 43 cm³ 100 x 6 mm 3" 1/2 x 4 mm 100 x 6 mm 100 x 3,6 mm 100 x 3,6 mm 114,3 x 6,3 mm 114,3 x 6,3 mm 114,4 x 6,3 mm 88,9 x 3,65 mm 100 x 5 mm 70 mm 100 x 25 stehend, 100 x 5 mm 400 mm 36 mm 10 mm 0 - 1,3 U/min 3.5 kW quick-change tooling system digital display of bend material spring back compensation remote control of bend, return and emergency stop functions accurate counterbending die positioning footswitch 3 hexagonal tool holders heavy-duty steel gear case users manaul tools not included, prices on request

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 12460 € 239.23 € Bedpfx Abswiru Sezoww 60 mm 500 mm 760 mm 1000 mm 186 kg 10 cm³ 60 x 4 mm 2" x 3,91 mm 60 x 4 mm 60 x 2 mm 60 x 3 mm 60 x 6 mm 64 x 6 mm 64 x 6 mm 63 x 4 mm 50 x 4 mm 35 mm 35 x 35 mm 60 x 20 stehend, 60 x 35 mm 380 mm 10 mm 10 mm 1,5 / 3 U/min 1.5 kW quick-change tooling system digital display of bending angle material spring back compensation foot pedal for hands-free operation accurate counterbending die positioning users manual tools not included, priced on request

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 7168 € 138.34 € 1 Bwodpfjwirqtex Abzjw 150 x 2.000 mm 20 - 114,3 mm 1 1 4 kW 270 kg The new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second. The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed. The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm (sample photo)

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 9340 € 180.26 € 48 mm 570 mm 410 mm 1000 mm 110 kg 6 cm³ 48 x 3,5 mm 1"1/2 x 3.68 mm 54 x 1,5 mm 50 x 4 mm 48 x 2 mm 48 x 2 mm 60 x 3 mm 64 x 2 mm 64 x 2 mm 60 x 2 mm 50 x 4 mm 32 mm 45 x 16 stehend, 45 x 25 mm 300 mm 10 mm 10 mm 2/3 U/min 1.5 kW 3 phase digital display of bend material spring back compensation quick-change tooling system 2 hexagonal tool holders accurate counterbending die positioning portable with base wheels footswitch users manual ALTERNATIVELY ALSO AVAILABLE AS FOLOWING MODEL (PRICE ON REQUEST): SB 48M (single phase, 2 r/min) Model with TCPlus control on request MACHINE-KIT WITH TOOLS (PRICES ON REQUEST): . maschine tube radius SB 48M K2D SB 48M Gas inch 2 x Ø SB 48T K2D SB 48T Gas inch 2 x Ø tools: Bwjdpfx Abewirlkszew Ø 1/2" (21,3 mm), R46 Ø 3/4" (26,9 mm), R56 Ø 1" (33,7 mm), R67 Ø 1" 1/4 (42,25 mm), R90 Ø 1" 1/2 (48,25 mm), R100 . maschine tube radius SB 48M K3D SB 48M Gas inch 3 x Ø SB 48T K3D SB 48T Gas inch 3 x Ø tools: Ø 1/2" (21,3 mm), R67 Ø 3/4" (26,9 mm), R82 Ø 1" (33,7 mm), R112 Ø 1" 1/4 (42,25 mm), R130 Ø 1" 1/2 (48,25 mm), R150

Condition: new, neu Bwjdpfx Aowiq Nhsbzsw ca. 8 Wochen ab Auftragse Italien 14020 € 269.18 € 76 mm 370 mm 680 mm 910 mm 193 kg 15 cm³ 76 x 3 mm 2" x 5,4 mm 76 x 3 mm 70 x 4 mm 76 x 1,6 mm 76 x 4 mm 76 x 6 mm 76 x 6 mm 76,3 x 3,25 mm 50 x 4 mm 45 mm 75 x 15 stehend, 75 x 30 mm 380 mm 10 mm 10 mm 1/2 U/min 3.5 kW digital display of bend material spring back compensation quick-change tooling system 2 hexagonal tool holders (40 and 50 mm accurate counterbending die positioning foot pedal users manual tools not included

Condition: used, Year of construction: 2019, gebraucht 2019 5505 prompt, Zwischenverkauf v Niederlande 2670 € Bwodpfxowiqwle Abzsw 1 100 x 2.000 mm 20 - 76,1 mm 1 3 kW 190 kg DEMO MACHINE / MINT CONDITION The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm