Used Cr Electronic Plasma for sale (47,401)

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions Prodpfx Ajxq Hh Hoahec

Year of construction: 2002, condition: good (used), Kaut absorption dryer CR 600 Prodpfx Aaotib R Iehec Manufacturer: KAUT GmbH Type: Dryer CR600 Year of construction: 2002 Dry air volume, nominal: 600 cbm / h Dry air volume, blowing freely: 750 cbm / h Regeneration air volume: 170 cbm / h Voltage: 400V / 3N + PE / 50Hz Power consumption: 5.9 kW Párátlanítási teljesítmény 10°C/70% relative páratartalom mellett: 3.8 kg/h Párátlanítási teljesítmény 20°C-on / 60% relative páratartalom: 4.4 kg/h Párátlanítási teljesítmény 20°C/80% relative páratartalom mellett: 5.2 kg/h Available external pressure, dry air side: 220 Pa Available external pressure, regeneration air side: 150 Pa Installation and dimensions Process air inlet (W x H): 380mm x 257mm Regeneration air inlet (W x H): 166mm x 179mm Dimensions (H x W x D): 735mm x 1125mm x 600mm Weight: 110kg

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, track width: 3,000 mm, working range: 6,000 mm, total width: 3,800 mm, total length: 11,000 mm, product height (max.): 70 mm, cutting height (max.): 60 mm, Lind plasma cutting system with HiFocus 360I Hypertherm cutting unit including KWE 360, PGV 3. Cutting table with complete extraction system. System is fully functional and in excellent condition. Demonstration possible. Original price €190,000.00. The system is immediately available. The price is valid for purchases until the end of November! Prsdpfx Aajwmq Tzjhec

Year of construction: 1973, condition: excellent (used), turning length 125 mm Predpfxoxpxqws Aahoc weight of the machine ca. 0,4 t

Condition: used, mileage: 4,30,879 km, Year of construction: 2012, Serial number: YV2AG40GXCA73xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21646 Specifications: 2012 model 430,879 km Euro 5 551 hp I-shift 8x4 Lift and swing on 4 axles Crane layout Tires (see pictures) Suspension: Full air 20 T hiab hook Break the hook Remote control Error codes in the display (see pictures) Services provided by owner Light Climate Radio Trailer hitch Videos Ready for delivery     Description: We have a 2012 Volvo FH13 8x4 tridem hook truck w/ 20t Hiab hook and crane setup for sale. Prsdpfxoxq Dcze Aahsc Error codes are displayed in the car's display (see attached pictures), and it must be assumed that errors and defects may occur. The clutch has recently been replaced. The vehicle is EU-approved and is in weekly use, which means that the stated mileage may increase slightly towards delivery. Curtains and lights inside the cabin will be removed upon sale. The car is ready for delivery. Km: 430879 HK: 550 Technical approved: Yes EU-approved until: 29.11.2025 Own weight: 14300 Euro: 5 Model: FH13 8x4 tridem krokbil m/ 20t Hiab krok og opplegg for kran

Condition: excellent (used), functionality: fully functional, mileage: 2,51,613 km, power: 355 kW (482.67 HP), overall weight: 26,000 kg, fuel type: diesel, axle configuration: 6x2, operation weight: 26,000 kg, maximum load weight: 11,100 kg, empty load weight: 14,900 kg, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 25,000 mm, loading space length: 6,450 mm, Year of construction: 2020, first registration: 05/2020, Equipment: air conditioning, crane, retarder, tail-lift, trailer coupling, DAF XF 480 / HMF 2530 L-CR Crane / Steering / Lift / Construction Material • Manufacturer: DAF • Model: XF 480 • Mileage: 251,613 km • First registration: 05/2020 • Engine power: 355 kW / 482 HP • Wheel configuration: 6x2 • Transmission: Automatic • Retarder • Lift-steer axle • Suspension: leaf/air • Air conditioning • Refrigerator Predpfx Asxcyg Hsahec • Long-haul cab • Cruise control • Trailer coupling • Loading platform: Length 6.45 m x Width 2.50 m • Drop side height: 95 cm Crane • Manufacturer: HMF • Model: 2530 L-RC • Year of manufacture: 2018 • Lifting capacity: 4,150 kg at 5.5 m, 3,010 kg at 7.4 m, 2,340 kg at 9.3 m, 1,910 kg at 11.3 m • Kinshofer stone clamp ----- • Unladen weight: 14,900 kg • Payload: 11,100 kg • Gross vehicle weight: 26,000 kg • Emissions standard: Euro 6 • German vehicle • German documents • Immediately ready for use

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Psdexq Hhyspfx Aahjrc Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: excellent (used), I sell plasma cutter hypertherm powermax 800 d very good condition. /////Price listed for 1 pc ///// Plasma cutter Hypertherm Powermax 800 Plasma cutter description The Powermax800 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage for superior cutting and gouging of mild steel, stainless steel, aluminum and other metals. The Powermax800's power supply provides a constant output current that varies from 20 to 50 amps, providing optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and cut metals up to 1 inch (25 mm) thick. Prodpfx Aaoulc Ixshsc

Condition: used, Year of construction: 2014, turning length 650 mm turning diameter 320 mm centre height 160 mm turning dia. over face-slide 190 mm quill: 3 MK spindle bore 42 mm Prodpexn Txajfx Aahoc turning speeds 25-5000 U/min centre distance 650 mm Number of working hours 637 h total power requirement 8 kW weight of the machine ca. 1250 kg dimensions of the machine ca. 1,6 x 0,5 x 1,7 m Weiler Praktikant VC Plus lathe, built in 2014, from a test workshop, in excellent condition! Features: All 99 storable tools can be programmed separately with feed rate and speed or constant cutting speed. Separate control of speed and feed rate via potentiometer is also possible. Thread pitches are freely programmable and feature electronic limit switches. Additional electronic stops can be set for lengths and diameters. A coolant device is not available. 8" colour screen Energy recovery Accessories: The machine includes a quick-clamping device with 30 collets 5 to Dmr 26 mm, 3-jaw chuck made by Röhm including 10 sets of soft jaws,centring tips, tailstock mounts (MK 3) for thread cutting with threaded drills and dies by hand, 15 Multifix holders size A, turning head for Multifix holder for producing bolt circles,spindle and bed stop, tool cabinet with 12 drawers, WP holder for internal and external machining, drills, reamers, standard thread gauges up to M10, comprehensive documentation on operation and maintenance. Translated with (free version)

Condition: good (used), Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection, electronic modules, PLC controller, digital input, digital output, electronic block, decentralized peripheral device -Manufacturer: Siemens, SIMATIC S7, Distributed I/O device from vertical lathe Scherer VDZ 80 DS -Type: ET 200L 6ES7 132-1BL00-0XB0 -Additional terminal: 6ES7 193-1FL30-0XA0 -Number: 4x module available Pjdpfxexphu So Aaherc -Price: per piece -Dimensions each: 190/135/H75 mm -Weight: 0.8 kg/piece

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCO-3020-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm Predpfxerp Dcre Aahec - Width: 2780 mm - Height: 1500 mm - Total mass: 1450.0 kg - Maximum load: 2000.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: excellent (used), functionality: fully functional, mileage: 2,51,613 km, power: 355 kW (482.67 HP), first registration: 05/2020, overall weight: 26,000 kg, fuel type: diesel, axle configuration: 6x2, operation weight: 26,000 kg, maximum load weight: 11,100 kg, empty load weight: 14,900 kg, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 25,000 mm, loading space length: 6,450 mm, Year of construction: 2020, Equipment: air conditioning, crane, retarder, tail-lift, trailer coupling, DAF XF 480 / HMF 2530 L-CR Crane / Steering / Lift / Construction Material • Manufacturer: DAF • Model: XF 480 • Mileage: 251,613 km • First registration: 05/2020 • Engine power: 355 kW / 482 HP • Wheel configuration: 6x2 • Transmission: Automatic • Retarder • Lift-steer axle • Suspension: leaf/air • Air conditioning • Refrigerator • Long-haul cab • Cruise control • Trailer coupling • Loading platform: Length 6.45 m x Width 2.50 m • Drop side height: 95 cm Pedow U Dknjpfx Aahsrc Crane • Manufacturer: HMF • Model: 2530 L-RC • Year of manufacture: 2018 • Lifting capacity: 4,150 kg at 5.5 m, 3,010 kg at 7.4 m, 2,340 kg at 9.3 m, 1,910 kg at 11.3 m • Kinshofer stone clamp ----- • Unladen weight: 14,900 kg • Payload: 11,100 kg • Gross vehicle weight: 26,000 kg • Emissions standard: Euro 6 • German vehicle • German documents • Immediately ready for use

Condition: used, turning diameter 210 mm turning length 1000 mm swing diameter over bed slide 435 mm centre height 210 mm greates pass round over bed 435 mm spindle head DIN 55027 / DIN ISO 702-3 spindle bore 52 mm turning speeds 44 - 2.000 U/min transmission ratio 12 feed per revolution 0,036 - 2 U/mm diameter of quill 65 mm quill stroke 120 mm taper bore DIN 228 MK4 total power requirement 5,5 kW -Lead screw and feed screw cover -Brake for main spindle Prodpoxqrdyofx Aahjc -Toolmaker precision according to DIN 8605 -High drive power and high torque on the main spindle -Large thread cutting range -Convenient operation -Digital position display (HEIDENHAIN ND 7013) 3-axis display for bed, cross slide, and top slide Tool memory for 16 tools Tool memory with one reference point per axis Sum button for Z and Zo Inch/metric switchable Plane path X as radius or diameter display Display resolution up to 1 µ Taper calculator -LED machine light -Coolant device

Condition: good (used), power: 122 kW (165.87 HP), fuel type: diesel, color: yellow, Year of construction: 2018, operating hours: 5,571 h, Equipment: air conditioning, Technical information Track width: 70 cm Prodpfx Aaoxp Iu Eohec AdBlue system: Yes Make of engine: C4.4 ACERT Top speed: 6 km/h Empty weight: 25.000 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: CAT0325FTRBW20281 Other information EPA Marked: yes Undercarriage condition: 80 Output of the auxiliary hydraulics: 429 l/min Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 8,92x2,98x3,18 Production country: JP Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 5125 mm Measurements height 2100 mm Control Unit Brand ESAB Model EPP-360 Vis 51 Main Drive Spindle speed range 50.8–25000 mm/min Number of axis 3 This 3-axis ESAB Combirex DX 4000 plasma cutting machine was manufactured in 2012. It features the ESAB WELDING & CUTTING Vission 51 control and a Precision Plasmarc 368 plasma source. Capable of cutting up to 40 mm with plasma and 300 mm with gas, it offers a cutting area of 3000 × 13000 mm. Consider the opportunity to buy this ESAB Combirex DX 4000 plasma cutting machine. Contact us for more information. Predpfxjxfwwbe Aahsc Application Types Cutting

Condition: good (used), CNC control, control panel, control desk, operating unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit board, analog distribution card, distribution print card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Siemens, control electronic modules from injection molding machine Demag D 100-275 NC -Power supply: Type E220 G5/15WRGD -Adapter capsule: Type 6ES5 491-0LB11 5 pieces -Interface modules: 6ES5 306-7LA11 -Subrack: 6ES5 700-2LA11 Prodpfjn H Etfjx Aahoc -Individual components: see photos -Price/Sale: complete -Dimensions total: 485/220/H305 mm -Weight: 12.3 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 4,760 h, power: 380 kW (516.66 HP), color: yellow, machine/vehicle number: 741864018, Equipment: air conditioning, cabin, Operating hours: 4,760 h Psdpfxoxrbu Rs Aahorc Drum hours: 3,240 h Front tires: 900/60 R32 Rear tires: /65 R30 Header width: 9.15 m On-board computer / Cab / Air conditioning / Rotor / Rotating beacon / Header / Header trailer / Chaff spreader / Straw chopper / Further description / Attachment make: New Holland / Attachment description: Varifeed 9.15 m / Lighting/warning panels / Hydrostatic drive / Air-suspended seat / Radio / Rape table / Drawbar / Radial distributor incl. 9.15 m header + transport trailer

Year of construction: 2002, condition: used, Serial number: 2020xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20126 Specifications: Model Year: 2002 Prodpfx Ajwdvgzeahsc 230V 4 amp settings: 60, 100, 150, and 200 Cuts all types of steel Plate size: up to 2500x6000 mm Recently replaced drive motors Description:This is an Esab UXE-P 3500 with both plasma and gas burner on the same carriage. You can choose between 4 amp settings depending on the thickness of the steel to be cut: 60 amp, 100 amp, 150 amp, and 200 amp. It can cut all types of steel, including aluminum, stainless/acid-resistant, Hardox, and regular mild steel from 2 mm to 30 mm. With the gas burner, you can cut thicknesses up to 150 mm.Plasma and gas burner can also be operated simultaneously. The machine can handle plate sizes up to 2500x6000 mm.It has been regularly serviced, and the drive motors have recently been replaced.

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard Predsxndbfspfx Aahec - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: excellent (used), Year of construction: 1970, turning length 300 mm weight of the machine ca. 0,4 t Pedpfxoxmahlj Aahsrc

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand ESAB Model Vision 51 Main Drive Number of axis 2 This ESAB Eagle 2000 plasma cutting machine was manufactured in 2007. It features a custom-built 2000 x 4000 mm cutting table and is equipped with an ESAB M3 plasma system capable of handling plate thicknesses up to 30 mm in carbon steel. The ESAB Vision 51 CNC controller enhances operational efficiency with a user-friendly interface. Consider the opportunity to buy this ESAB Eagle 2000 plasma cutting machine. Contact us for more information about this machine. Pjdpfxjxn Dkte Aahjrc Application Types Cutting

Condition: new, Year of construction: 2022, AVAILABLE FROM STOCK : Geka plasma cutting machine GCS P-4020 table size 4000 x 2000mm incl. plasma source Hypertherm 125A incl. PRONEST HYPETHERM NESTING SOFTWARE - GEKA CNC cutting table Prjdpegypclefx Aahoc - Hypertherm Powermax 125A - cutting capacity: steel 25mm, stainless steel 20mm, aluminium 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for increased support and rigidity. - CNC Tex computer control with touch screen. - Linear guides on all axes for high repeatability. - Safety cutting head to prevent damage to the cutting head. - Rack and pinion gearbox with 70kg/cm servo motors. - Fully enclosed cable drag to protect cables from damage. - Movement speed 40 meters/min. - Resolution 0.01mm. - Optional automatic lubrication on all axes. - Optional, separate suction chambers in the machine bed. - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. - Torch anti-collision system (machine stops before any collision). - Laser pointer to check X and Y axes for zero reference. - The effective cutting area for P-4020 is 4000 x 2000mm. - Portal height Z = 100 mm. - Table with compartements for aspiration

Condition: ready for operation (used), Dimensions: Width: 180 mm Depth: 460 mm Height: 280 mm Pedpfxexfk Dze Aahsrc Year of manufacture: 2008 Cutting thickness: Quality cut 12 mm – Severance cut 14 mm

Condition: used, Year of construction: 2023, operating hours: 162 h, Drive: Track Serial number: cat03027kcz60xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21206 Specifications: Model year: 2023 Not certified 162 hours 18.4 kW Weight: 2,800 kg Machine width: 157 cm Rubber tracks Dozer blade Swing boom Tiltrotator Grading bucket Digging bucket Grapple Trenching bucket Prodpfx Asw S Ay Asahsc Air conditioning / AC Radio Ready for delivery Description: For sale: 2023 CAT 302.7 CR excavator equipped with tiltrotator, grading bucket, digging bucket, grapple, and trenching bucket.The machine is well maintained with only 162 hours on the clock. Fully equipped and built for reliability and performance.The cab is spacious and provides excellent visibility, along with great driving comfort.Ideal for smaller jobs and precision work.Ready for immediate delivery. Hours: 162 Own weight: 2800 Width: 157 Kw: 18,4 Model: 302.7 CR gravemaskin m/ rototilt, pusseskuff,graveskuffe,klype og grøfteskuffe

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support Predpfx Aaexnda Uohec - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions