Used Crank for sale (581)

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Dedicated chip conveyor with high discharge The machine can currently be inspected while powered on. Bodjzdpvgopfx Abtedg Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.

Condition: excellent (used), Reversing clamp Manufacturer: Rückle Type: PKTW 2 Dimension: 5 x 1 x 1,5 meter Forkardt power chuck type FNC 315-65 Bore 65 mm Outer diameter 315 mm Further: Bjdpfx Absin Ef Rjtjdg Profile rail guide RUE 45 4 centering and clamping units Integrated chip guide

Condition: used, Year of construction: 2017, turning length: 500 mm, spindle motor power: 30,000 W, General Year of manufacture: 2017 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 500 mm Maximum cutting radius mm 200 Stroke over center mm 25 Maximum clamping diameter mm 100 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 602 Longitudinal stroke Z-/W-axis mm 602 / 602 Cross stroke X-axis mm 140 Cross stroke X-/U-axis mm 140 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 230 Tool holder Quick-change system Bearing diameter of tool drum in the front bearing mm 660 * 790 Chuck holder Cylindrical mm 180 Chuck diameter up to mm 260 Workpiece spindle bearing diameter in the front bearing mm 170 Guidance system for machining units Rolling guides with rollers, size 45 Feed drives Cross slide adjustment W-axis, Z-axis 100% duty cycle Nm 18 / 18 Tool feed U-axis, X-axis 100% duty cycle Nm 18 / 18 Steady Z3-axis 100% duty cycle Nm 10.5 Vise right Z4-axis 100% duty cycle Nm 10.5 Circular feed workpiece C21- axis, C22-axis 100% duty cycle Nm 18 / 18 Axis speed Bsdpfx Abowgndketedg Feed/rapid traverse speed longitudinal W-, Z-, and Z3-axes m/min 0 - 40 Feed/rapid traverse speed transverse U-axis, X-axis m/min 0 - 20 Feed/rapid traverse speed Z3-axis (steady rest) m/min 0 - 40 Circular feed of workpiece C21-axis, C22-axis rpm 0 - 60 Cutter drive Power per unit (nominal / maximum) kW 15 / 30 Cutting speed m/min 120 - 255 Tool torque Nm 1500

Condition: used, machine/vehicle number: 20308, max. swing diameter: 600 mm distance between centers: 2200 mm max. grinding diameter with a grinding wheel of 800 mm diameter: 125 mm grinding wheel diameter when using steady rests: 20 - 125 mm grinding wheel dimensions: 800 x 28 - 800 x 42 x 305 mm 2 grinding wheel speeds 3 workpiece speeds: 32, 55 and 96 rpm table traverse, coarse/fine, manual: 10/2 mm Bdjdpfxecik N Sj Abteg automatic feed rate of the grinding wheel: 0.005 - 0.025 mm 6 table speeds: 120 - 1540 mm/min grinding spindle drive: 8 kW electrical connection: 380/400 V, 10 kW space requirement: 6100 x 2300 x 1600 mm weight: 7 tons

Condition: ready for operation (used), Year of construction: 2013, operating hours: 2,780 h, functionality: fully functional, workpiece weight (max.): 150 kg, grinding wheel diameter: 660 mm, center height: 270 mm, center width: 1,700 mm, grinding diameter: 300 mm, spindle speed (max.): 1,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Workpiece Grinding diameter in rotary grinding, max.: 220 mm Grinding diameter in cylinder grinding, max.: 300 mm Rotary diameter over table, max.: 300 mm Passage in the steady rest, min. / max.: 20 / 90 mm Workpiece weight between centers, max.: 150 kg Center height above table: 270 mm Distance between centers: 1,700 mm Grinding length with fixed tailstock: 1,500 mm Grinding length with special equipment: 1,300 mm Diameter of the chuck: 180 mm Tailstock quill travel: 50 mm Grinding wheel Grinding wheel diameter, max.: 660 mm Grinding wheel width, min. / max.: 20 / 80 mm Peripheral speed, max.: 35 / 63 m/s Grinding wheel for concave cam profiles Diameter with electro spindle, min.: 100 mm Grinding wheel width, min. / max.: 20 / 50 mm Peripheral speed, max.: 35 / 50 m/s Grinding spindle head X-axis Travel: 490 mm Measuring resolution: 0.0001 mm Workpiece head C-axis Speed range of workpiece spindle: 1 - 1,000 rpm Speed range of contour grinding spindle: 1 - 400 rpm Torque on the spindle: 80 Nm Resolution: 0.0001 ° Table Z-axis Measuring resolution: 0.0001 mm Bsdozarx Djpfx Abtjdg MACHINE DETAILS Drive power of the motors Grinding spindle motor: 7.5 / 15 kW Workpiece motor, C-axis: 12 W Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,600 x 2,000 mm Total weight: 9,850 kg EQUIPMENT Automatic balancing device, programmable Grinding spindle head X-axis with linear motor Optical scale on the X-axis Workpiece head C-axis with encoder Table Z-axis with linear motor Optical scale on the Z-axis Workpiece motor, direct drive type, C-axis Grinding spindle motor, direct drive type Fixed tailstock Tailstock quill Note: The machine can be powered up for inspection for an additional cost of approximately €12,000.

Condition: new, Face plate: diameter 3000mm, max. Weight of the workpiece 12 tons, length adjustment 2000 mm, rapid traverse 10000 mm / min., Stepless feed 0 - 5000 mm / min., Max. Torque on the face plate 50000 Nm, speed - continuously adjustable 0 - 80 U / min. Milling unit: diameter of the milling cutter 4600mm, depth of the milling groove 1300 mm, axial adjustment of the milling machine 320mm, axial positioning speed for milling machine spindle 0,5-140 mm/min., Milling cutter positioning 0,1 degrees; Speed ​​infinitely adjustable 0,0 - 10 U/min., Max. Torque on the cutter 315000 Nm. Made in the EU. Bdsdpowy Rxkjfx Abtog

Condition: used, Year of construction: 1952, workpiece length 5000 mm swing dia. 1100 mm clamping length 6000 mm grinding diameter 1100 mm grinding wheel diameter 1300 mm Bodpfsyt Rxvox Abtsdg workpiece weight 2500 kg main drive motor 22 kW crankshaft bearing diameter 275 mm steady 100-250 mm speeds of tool 400/500 U/min workpiece turning speeds 20-40 U/min weight of the machine ca. 30 t 13 Grinding Steady Rests Mandrels Mounting Flanges Clamping Devices The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: reconditioned (used), functionality: fully functional, overall weight: 2,000 kg, shaft diameter: 175 mm, length (extended): 4,418 mm, motor model: J624GS-F, Crankshaft J624, overhauled and ready for installation. Features connecting rod journals at a nominal size of 175 mm and main bearing journals machined to 194.5 mm (compared to the standard 195 mm) to ensure uniform fits. Hard chrome plating has been applied to journals N4 and N5 to restore dimensions and ensure surface smoothness. The component has undergone thorough inspections to guarantee proper functionality during installation. Technical Specifications Type: KURBEL Bdedpjxu Atasfx Abtjg Engine: J624GS-F Length: 4,418 mm Main bearing diameter: machined to 194.5 mm (standard 195 mm) Connecting rod journal diameter: 175 mm

Condition: used, Year of construction: 1980, workpiece length 2700 mm swing dia. 630 mm clamping length 2700 mm stroke position adjustment 40-130 mm grinding wheel diameter 1000 mm weight of the machine ca. 18,5 t dimensions of the machine ca. 9x4 m cyclic control CNC / Simatic S7-300 steady rest hydraulic pre-positioning Bdedpfsyukdzox Abteg manual fine tuning (Vertical u. Horizontal) grinding wheel flanges rough turning fixture Radial- and side turning fixtures manual Radius turning fixture filtering system Polo inclined bed filter SB-A0.4 manufactured in 2012 grinding wheels storage system for 8 grinding wheels diverse machine tools steady rest jaws diverse irrigation nozzle (workpiece cooling) washer cover with edge lavage Indexierledges for quick workpiece slide position lifting device for grinding wheels manipulation diverse spare parts sliding cover left and right diving plate and clampinserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2003, condition: good (used), Schatz Advanced Screwdriving Unit  Schatz screw machine Length: 5450 mm Height: 3000 mm Unwinding stand Length 5020 mm 2 x Demag crane 1 x Liftket electric chain hoist  Bedpfx Aboihiiiotedg 1 x Schatz 907500 Installation without Advantech TPC-1260 TE Touch Panel PC Financing through our bank is also possible. komplett-konzept.leasingo.de More screwdriving machines in other sizes - new and used - can be found here.

Condition: good (used), Weipert crankshaft grinding machine Weipert Grinding bench Centering point: Röhm 110 H MK5 Bdodpjihfrysfx Abteg machine length: 4300 mm Financing through our bank is also possible. komplett-konzept.leasingo.de More grinding machines in other sizes - new and used - you will find in our store! International shipping costs on request!

Condition: used, Year of construction: 2005, Distance between centers 3050 mm Center height 280 mm Travel paths: Z-axis 2800 mm X-axis 400 mm U-axis 160 mm W-axis 160 mm Max. workpiece weight 1000 kg Grinding wheel: Outer diameter (new) 1050 mm Max. width 120 mm Bore 304.8 mm Grinding wheel peripheral speed 6-50 RPM Accessories: - Measuring system - Tailstock Bdodpfx Abowz Rg Djteg - Coolant system - Documentation

Condition: good (used), Year of construction: 2011, LANDIS LT-2 TWIN WHEEL CNC ORBITAL CRANK GRINDER Equipped with: Landis 6400 CNC Control Siemens TOUCH HMI Arobetech Steady Rest Marposs P7 Gage System Lateral Locator Twin CBN Grinding Wheels Rotary Dresser Headstock Tailstock Rittal AC Units Specifications: Maximum Center Distance: 680 mm Bdsdpfx Absrtrxxjtjg

Condition: excellent (used), MAWEG Gluing Press Machine frame inclined at 10 degrees Single-sided loading Horizontal beam with manually adjustable height via hand crank (all clamping cylinders can be adjusted together) Hydraulic cylinders with quick clamping function, infinitely adjustable Manual hydraulic cylinder clamping Pressing force per hydraulic cylinder approx. 2000 kp Hydraulic cylinder stroke 100 mm Clamping depth 100 mm Maximum clamping length: 2800 mm Maximum clamping height: 1800 mm 4 vertical pressing cylinders 2 horizontal pressing cylinders 6 counter-stops Note on used machines: • Errors in technical specifications and prior sale excepted. • Prices quoted are ex-location and are pick-up prices – loading included! • The machines have been cleaned and function tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. Bdodsyyn E Uspfx Abteg (We only respond to inquiries that include your address and telephone number!)

Condition: used, Year of construction: 2000, Second-hand machine Year of manufacture: 2000 Features and technical specifications: - Grinding unit can be swivelled using a hand crank - The machine frame, made of welded steel, guarantees high torsional rigidity and vibration-free operation - Oscillating sanding belt with separate gear motor for better sanding results - Oscillation can be switched on as required - Grinding base with graphite coating for a longer service life of the grinding belt - Height-adjustable grinding table to utilise the full width of the grinding belt - Additional table for grinding radii with integrated extraction ports - The spring-loaded belt tensioning system automatically compensates for differences in belt length - With adjustable stops, ideally suited for veneer sanding - Excess veneer can be sanded down effortlessly - With castors - Oscillation motor power: 0.11 kW - Mains voltage: 400 V - Mains frequency: 50 Hz - Sanding belt length: 2,640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Grinding surface length: 800 mm - Grinding surface width: 150 mm - Grinding unit swivel range: 0–45° - Work table length: 950 mm - Worktable width: 450 mm - Work table height adjustment: 110 mm Bdsdpfx Abozk Nruotjg - Dimensions: 1,700 × 1,000 × 1,150 mm - Weight: 300 kg Availability: at short notice Location: Flörsheim

Condition: used, maximum load weight: 33,185 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2027, loading space length: 12,680 mm, loading space width: 2,400 mm, loading space height: 2,434 mm, loading space volume: 74 m³, total length: 13,457 mm, total width: 2,550 mm, total height: 3,895 mm, Year of construction: 2023, Equipment: ABS, STAS 3-axle HardoX steel tipper, 74 m³ First registration 01/2023, from first owner Dimensions (L x W x H): 12,680 x 2,330/2,430 x 2,434 mm (tapered design) Unladen weight: 8,815 kg Floor made entirely of 5 mm HardoX steel HB450 Front and side walls made of 3 mm HardoX steel HB450 Straight front wall, with internal access ladder Rear portal doors 50:50, pneumatic secondary release Reinforced tarpaulin roof cover Bjdpjzwr Uxsfx Abtedg HYVA tipping cylinder, Alpha type, low pressure 2x pneumatic vibrator JOST crank landing gear, full load capacity SAF axles with large disc brakes, 430 mm 1st axle: lift axle WABCO trailer EBS with overrun protection RSS WABCO Smartboard Lifting and lowering device Automatic tipping lowering Tires: 6 x 385/65 R 22.5 Aluminum access ladder Shovel and broom holder Toolbox on the left 4x LED reversing lights RENTING is the new BUYING; with us, it is also immediately available in a full-service rental. -----

Condition: used, maximum load weight: 32,447 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 10/2026, loading space length: 13,110 mm, loading space width: 2,400 mm, loading space height: 2,650 mm, loading space volume: 86 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, STAS 3-axle HardoX steel tipper, 86 m³ First registration 01/2023, from first owner Dimensions (L x W x H) 13,110 x 2,350/2,450 x 2,770 mm (tapered design) Unladen weight 9,640 kg Floor made of continuous 5 mm HardoX steel HB450 Front and side walls made of 3 mm HardoX steel HB450 Pneumatically foldable rear underrun protection Straight front wall, with interior ladder Rear portal doors 50:50, pneumatic secondary release Reinforced tarpaulin cover HYVA tipping cylinder, Alpha type, low pressure 2x pneumatic vibrators JOST crank-type landing gears, full load capacity Bdjdjzwr Urspfx Abtog SAF axles with large disc brakes, 430 mm 1st axle: lift axle WABCO trailer EBS with overrun protection RSS WABCO Smartboard Raising and lowering device Automatic tipping lowering Tires: 6x 385/55 R 22.5 ALCOA aluminum rims, Dura-Bright, high-gloss finish Aluminum step ladder Shovel and broom holder Toolbox on the left 4x LED reversing lights RENTING is the new BUYING; with us, full-service rental options are immediately available.

Condition: used, maximum load weight: 34,130 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 10,149 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 3,822 mm, Year of construction: 2024, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 55 cbm "X-Shape" First registration: 10/2024, condition: like NEW Mileage: 62,270 km Dimensions inside (LxWxH): 10,149 x 2,350 / 2,450 x 2,285 mm (conical design in width) Unladen weight: only 7,820 kg Z-chassis, cranked version Floor made entirely of 5 mm Hardox steel HB450 Front wall and side walls: 4 / 3 mm Hardox steel HB450 Sloped front wall, interior access ladder 2-wing rear portal doors with pneumatic remote unlocking Bodpsyl Tfvjfx Abtjdg GRAIN SLIDE with dust protection bag Reinforced roll-over tarpaulin HYVA tipping cylinder, type Alpha, suitable for high and low pressure Crank landing legs, rated for full load 2x pneumatic vibrators under the body SAF axles with large 430 mm disc brakes 1st axle is a LIFT AXLE with starting aid WABCO trailer EBS with RSS roll stability control WABCO Smartboard Automatic tipping lowering system Hydraulic lift and lowering device Tyres: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium wheels Aluminium access ladder Shovel and broom holder Right-hand toolbox 4x LED reverse lights RENTING is the new BUYING – also available from us as a FULL-SERVICE RENTAL, immediately available-----

Condition: good (used), Ideal 4705 Paper Cutting Guillotine This is a currently manufactured guillotine model from the renowned German manufacturer Ideal. Very good condition, ready for production. Description: – Cutting length: 475 mm, – Cutting thickness: 70 mm, – Minimum scrap: 30 mm, Bsdpfszt H S Dex Abtedg – Maximum distance from the knife to the saddle: 455 mm. Safety Cutting System includes: a lifting, transparent safety cover (blocks cutting when the knife cover is open); a safety lock (blocks the knife lever in the upper position); safe cutting depth adjustment (from the outside of the machine); cutting blades can be easily and safely rotated and replaced; a knife made of high-quality „Solingen” steel; a sturdy steel knife carrier; a sturdy pressure plate lowered by a wheel (full control of the pressure force adjustment depending on the type of paper being cut); a rear stop adjusted by a crank; a measuring tape in millimeters and inches; Solid metal construction; The set includes a table for the machine, a spare cutting stick, an instruction manual, and a spare knife.

Condition: used, Year of construction: 2020, Overview This Gronemeyer VFA is a vertical conveyor for glass bottles, built in April 2020 by Gronemeyer Maschinenfabrik GmbH & Co. (Höxter, Germany). It raises bottles between the levels of a filling line and works with two synchronously running endless chains whose carrier elements take the bottle from both sides, so the container is guided upright over the whole climb. The nominal capacity is 45,500 bottles per hour at a conveying speed of approximately 60 m/min. The conveying width is set by hand crank across a range of 20 to 150 mm, so a format change needs no tooling. The machine is enclosed in transparent guarding, has service doors with safety switches, an automatic central lubrication system and a pneumatic chain tensioning station. It is currently being dismantled and can be inspected at BEVMAQ's warehouse in Germany from early September 2026. Technical data - Manufacturer: Gronemeyer Maschinenfabrik GmbH & Co. (Höxter, Germany) - Model: VFA - Year of manufacture: Machine type: vertical bottle conveyor with two carrier chains, side grip - Product: glass bottles, Ø 68.8 mm, height 228 - 248 mm - Nominal capacity: 45,500 bottles/hour - Conveying speed: approx. 60 m/min at 50 Hz - Speed range: approx. 24 - 104 m/min at 17 - 87 Hz - Width adjustment: 20 - 150 mm, manual by hand crank - Carrier chain: type LF 114 SS - L2 NK, 114.3 mm wide, 30.48 m - Drive motor: SEW, 2.2 kW, 230/400 V, 50 Hz, IP 56, suitable for inverter operation - Gearbox: Stöber, ratio i = 9.31 - Compressed air: 6 - 10 bar, 1/8" connection - Central lubrication unit: 230 V, 50 Hz, 0.75 A - Overall height: approx. 4,185 mm - Operating environment: enclosed rooms, 5 - 40 °C Equipment - Pneumatic chain tensioning station - Automatic central lubrication system - Transparent protective guarding around the conveyor section - Service doors with RSS36 safety switches - Hand crank for width adjustment - Original Gronemeyer documentation: operating manual, installation drawing, gearbox, motor and lubrication system documents Bodpfjzw Em Uex Abtodg Condition Used - currently being dismantled; from early September 2026 it can be inspected in dismantled condition. Scope of supply and spare parts are agreed during the offer stage. Availability From early September 2026. Location: BEVMAQ warehouse, Germany. Loading by arrangement.

Condition: used, Year of construction: 1982, machine/vehicle number: 18613, KUNZMANN universal tool milling machine, model UF 6 NR Year of manufacture 1982, 2 gear stages, 1400/2800 rpm, Table size 860x240mm, 3 T-slots 14mm, spindle mount SK30, Bdodpfx Aboiqkc Istsg Travel ranges: X/Y/Z = 450/200/430mm, horizontal speeds: 18 stages from 32-1342 rpm, vertical: 18 stages from 72-2988 rpm, 12 feeds in the X-axis, separate coolant tank, chip guard, machine lamp, 3 horizontal milling arbors each with a milling cutter, 2 overarm milling arbor bearing blocks, 1 collet chuck with wrench. 1 machine vise with crank.

Condition: good (used), Hang 117-01 paper drill The device is in perfect condition, 100% functional. The highest class of machines among drilling machines. Each head is independently adjustable, which allows the use of drills of different lengths. Drill table adjustable in every plane, with a lock. The spacing of the heads is adjustable with a crank. Waste directed to an external container. Two operating speeds: 950 and 1900 rpm Technical data: number of drilling heads: 2 diameter of lights: 3-10mm stack height: 60mm drill spacing min: 45mm / max 160mm table dimensions: 780x430mm Weight: 100kg Power supply 380V Bjdpfx Ajztn Dbsbtodg The machine has documentation, maintenance tools, drills, and a new column

Condition: new, Year of construction: 2024, load capacity: 300 kg, Welding rotary table KT 300 Horizontal load capacity: 300 kg, tilted: 150 kg Bodoc Ug Tlspfx Abtedg Power supply: 220 V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilting range: continuously adjustable via crank gear motor, 0 - 90° Speed: 0.3 to 2.5 RPM Includes foot pedal remote control Optional extra: Quick-release chuck Diameter: 300 mm, €450

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 72300 € 1366.47 € 40 to Bdodpfoynm Aysx Abteg 1250 mm Y1 / Y2 / X und R Achse 200 mm 1050 mm 250 mm 440 mm servomotorischer Spindela 115 mm/s 10 mm/s 115 mm/s 650 mm 250 mm 1000 mm 7.2 kW 1950 mm 1450 mm 2650 mm 3600 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66S - 17 " Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: - higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal -low energy consumption - compact motor-spindle unit with small amount of components -no hydraulic components optional equipment: Z1/Z2-axes CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining, corner copying, and two trimming blades. A good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed speed: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection: 1x100mm, 4x80mm, including the piping shown, leading to 200mm Easy-Touch control with color screen for easy machine operation 10 programs can be saved Units: Top pressure with manual adjustment using a crank and SIKO counter Bdedpfszn Afpsx Abteg Infeed guide with manual adjustment and SIKO counter Joining cutter with diamond cutters, sharpened A total of 2 interchangeable glue tanks for quick color changes from white to transparent Gluing unit with automatic edge feed for roll material up to 3 mm Pressure zone with 3 rollers Miter saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, chamfering, and radius Corner rounding cutter R2 with diamond cutter, 1 motor-driven Radius trimming blade R2, manually adjustable Glue seam trimming blade with large roller, pneumatically controlled Hood locking mechanism CE marking Operating manual as a folder All cutting inserts of the milling units and the trimming blades have been replaced or re-sharpened, saws sharpened, diamond joining cutters sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the shaping cutter has not been replaced, but it is still sharp. Original paint, only a few spots have been touched up. Dust extraction hoses replaced. Approx. 1200 operating hours, which is only 1/2 hour per day. Machine dimensions: approx. 4300 (with table) x 1250 x 1600 mm (LxWxH) Weight: approx. 950 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider."