Used Crankshaft for sale (107)

Condition: new, functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 123 kg, warranty duration: 24 months, temperature: 80 °C, The HDS 8/18-4C Classic model focuses on structural refinement compared to its predecessor, the HDS 8/18-4M. The pump and boiler design have been improved, making this the most advanced version of the hot water model currently available. Its balanced construction allows for single-person operation and transport. The brass pump head and automatic pressure reduction system extend the service life of the unit. A large water filter protects the pump from any contaminants present in the water. Product Benefits: A reliable crankshaft pump and water-cooled motor ensure maximum efficiency and long-lasting operation. The open design allows for easy access to all necessary components. A sturdy steel tubular frame ensures maximum protection and easy transport, for example, by crane on the construction site. Integrated crane hooks and large, puncture-proof wheels facilitate transport to and from the construction site. The ECO mode allows you to optimize fuel consumption (up to 20%). The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from any contaminants present in the water. Technical Specifications: Condition: NEW Model: HDS 8/18-4C CLASSIC Hnodpfewkq I Hjx Achsr Manufacturer: KARCHER Country of Production: Germany Series: Professional Thread Type: KARCHER !EasyLock Series Power Supply (~/V/Hz): 3 / 400 / 50 Pump Output (l/h): 400 - 800 Working Pressure (bar/MPa): 30 - 180 Maximum Pressure (bar/MPa): 235 Water Heating Range (°C): ~80 Connected Power (kW): 5.5 Power Cable (m): 5 Weight (kg): 123 Fuel Tank (l): 30 Dimensions (L x W x H) (mm): 1075 x 722 x 915 Equipment: Pressure Gun: Karcher Professional High-Pressure Hose: Karcher Professional – 10 m, Lance: Karcher Professional 1050 mm Nozzle: POWER Karcher Professional Pressure Nozzle Key Features: Mobility: The unit is equipped with large, puncture-proof wheels that allow safe maneuvering on uneven surfaces. Construction: Brass pump and 4-pole, cooled, low-speed motor. A pressure reducing valve after the unit is switched off ensures the longest service life and high operating parameters. Easy Transport: Integrated crane hooks facilitate transport of the unit on the construction site.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 4016, fuel type: diesel, number of cylinders: 16, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,800 rpm, overall weight: 700 kg, total length: 2,200 mm, total width: 500 mm, total height: 800 mm, type of cooling: water, Engine block with crankshaft bearings supports. Bought by mistake for a genset overhaul - never used, stored in a box, inside a dry werehouse. Good as new. Fits any 4000 series Perking 16 cylinders genset engine. Hnjdpfju Rmt Dsx Achor

Condition: used, Year of construction: 2008, machine/vehicle number: AT88, Used Tetra Pak Sterilizer + Homogenizer 12000 l/hThe Used Tetra Pak Sterilizer + Homogenizer 12000 l/h processes liquid food products through thermal treatment and homogenization, ensuring high safety and quality standards in industrial production. Since it combines a UHT sterilization system with a high-pressure homogenizer, it delivers optimal processing for various food and beverage applications. Moreover, its design allows easy integration into existing production lines, making it a practical choice for manufacturers.General FeaturesThis system operates at a capacity of 12,000 liters per hour (l/h), providing both high performance and consistent results in thermal treatment and particle size reduction. Tetra Pak, a leading brand in food processing technology, manufactured this unit in 2008, ensuring a balance between proven reliability and advanced engineering. Furthermore, the system’s robust construction guarantees long-term durability, reducing the need for frequent maintenance.Tetra Pak Steritube UHT SterilizerThe Tetra Pak Steritube UHT sterilization unit applies high temperatures to ensure the microbiological stability of liquid products. Because it features a controlled heating system, it keeps the sterilization temperature between 95°C and 138°C, depending on production requirements. In addition, operators can adjust the holding time at multiple levels, choosing between 5, 10, 15 seconds for initial stages and 30, 45, 60 seconds for advanced stages, allowing precise thermal treatment control.To optimize heat transfer, the system regulates hot water flow between 10,500 and 32,000 l/h, ensuring uniform sterilization. As a result, the unit maintains an inlet temperature of 5°C and an outlet temperature between 85°C and 95°C, which provides controlled cooling before further processing. Another key advantage is that its design allows seamless integration with homogenization systems, CIP (Cleaning-in-Place) units, and aseptic packaging lines.Tetra Pak Alex 30 HomogenizerThe Tetra Pak Alex 30 homogenizer operates at pressures up to 250 bar, effectively reducing particle size and improving product stability. Because it processes between 6,000 and 14,000 l/h, it is ideal for enhancing the consistency and quality of UHT-treated liquid products.Additionally, the system features cone valves and pistons made of stainless steel or solid ceramic, ensuring durability and resistance to wear. It also includes grooved and V-type seals, which provide effective sealing and reduce maintenance needs. Since the homogenization process occurs in two stages, the system ensures maximum efficiency. The first stage applies 42% of the pressure, while the second stage handles the remaining 58%, both controlled electronically via VDC signals.Moreover, an ABB M3BP315SMB 4 motor powers the unit with 132 kW output, operating at 380V and 50 Hz, which guarantees reliability and high performance. At the same time, a 7.5V DC thermistor monitors the operating temperature to prevent potential malfunctions. For enhanced safety, the system includes a 24V DC door safety lock and a crankshaft speed sensor to prevent overloads.ConclusionThe Used Tetra Pak Sterilizer + Homogenizer 12000 l/h offers an efficient solution for thermal processing and homogenization of liquid food products. Thanks to its high performance and reliable construction, manufacturers can optimize their... Hsdjv Di Itspfx Achsnr

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,580 kg, input voltage: 400 V, total length: 1,180 mm, total width: 1,600 mm, total height: 2,310 mm, Special Offer – 5% Discount Available! 40T Open Back Eccentric Press Hnsdpfxjytdl As Achor The 40T Open Back Eccentric Press is a professional industrial machine designed for punching, stamping, bending and forming metal components. Its rigid open back frame provides excellent accessibility to the working area while ensuring high stability, precision and operator comfort. The machine features a transversely mounted crankshaft, dry pneumatic friction clutch and advanced safety systems for reliable, efficient and safe operation. Its robust construction makes it suitable for continuous industrial production. Main Features * Open back frame design * Heavy-duty steel construction * Fixed working table * Transversely mounted crankshaft * Dry pneumatic friction clutch * Adjustable slide stroke * Slide balancing device * Integrated safety valves * Manual controls * High productivity * CE certified Technical Specifications * Press force: 40 t * Stroke under nominal load: 6 mm * Slide stroke: 120 mm * Strokes: 55 strokes/min * Maximum die height: 220 mm * Die height adjustment: 80 mm * Throat depth: 260 mm * Working table: 710 × 480 mm * Table thickness: 80 mm * Table hole diameter: Ø180 mm * Bed opening: Ø200 × 150 × 300 mm * Slide surface: 320 × 270 mm * Maximum frame inclination: 25° * Distance between columns: 300 mm * Punch hole diameter: Ø50 mm * Punch hole depth: 70 mm * Motor power: 4 kW * Machine dimensions: 1600 × 1180 × 2310 mm * Machine weight: 3580 kg Standard Equipment * Light curtains * Mechanical safety guards * Lower table ejector * CE Declaration of Conformity * Technical documentation Applications * Punching * Stamping * Bending * Forming * Sheet metal production * Metal fabrication workshops * Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,100 kg, input voltage: 400 V, total length: 950 mm, total width: 1,460 mm, total height: 2,380 mm, Special Offer – 5% Discount Available! 25T Open Back Eccentric Press Hnodjytcvgjpfx Achsr The 25T Open Back Eccentric Press is a professional industrial machine designed for punching, stamping, bending and forming metal components. Its rigid open back frame provides excellent accessibility to the working area while ensuring high stability, precision and operator comfort. The machine features a transversely mounted crankshaft, dry pneumatic friction clutch and advanced safety systems for reliable, efficient and safe operation. Its robust construction makes it suitable for continuous industrial production. Main Features * Open back frame design * Heavy-duty steel construction * Fixed working table * Transversely mounted crankshaft * Dry pneumatic friction clutch * Adjustable slide stroke * Slide balancing device * Integrated safety valves * Manual controls * High productivity * CE certified Technical Specifications * Press force: 25 t * Stroke under nominal load: 3 mm * Slide stroke: 10–110 mm * Strokes: 80–120 strokes/min * Maximum die height: 250 mm * Die height adjustment: 50 mm * Throat depth: 210 mm * Distance between frame columns: 450 mm * Working table: 700 × 400 mm * Table thickness: 80 mm * Outer table hole diameter: Ø170 mm * Table hole depth: 20 mm * Inner table hole diameter: Ø150 mm * Slide surface: 360 × 300 mm * Punch hole diameter: Ø40 mm * Punch hole depth: 60 mm * Motor power: 3 kW * Machine dimensions: 1460 × 950 × 2380 mm * Machine weight: 3100 kg Standard Equipment * Light curtains * Mechanical safety guards * Lower table ejector * CE Declaration of Conformity * Technical documentation Applications * Punching * Stamping * Bending * Forming * Sheet metal production * Metal fabrication workshops * Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Year of construction: 2023, condition: ready for operation (used), A Thielenhaus microfinish/superfinish machine for precision surface finishing of rotationally symmetrical components such as shafts, camshafts, crankshafts, and similar precision parts is available. Application range: shaft machining, max. machining length: 750mm, max. workpiece diameter: 100mm, max. travel: 650mm. Machine dimensions X/Y/Z: approx. 2100mm/1450mm/2050mm, weight: approx. 1800kg. Including SL50 belt finishing unit, Elbaron RON 60 SV oil mist extraction system, and workpiece holder. Documentation available. An on-site inspection is possible. The machine was used for sample machining and has hardly run. Hnjdpezcyqasfx Achor

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, PRICE REDUCED!!!!! Taylor Hobson Talyrond 265 roundness measuring system. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, and shafts, as well as eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing the system's setup, except for the computer, which is a newer model from HP with a small form factor.... Max. diameter 350 mm Max. test piece height 500 mm (higher measurements are possible by measuring in two halves, up to a maximum of 1000 mm....) Self-centering of the workpiece +/- 5 mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I purchased it, was an implant company in Hamburg, where it was used in a "medically clean environment." It is extremely clean and has never been in a dirty machine hall. Hjdpfx Ajzcqy Eschonr The year of manufacture is estimated to be between 2002 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password....). Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional schematics are also included! The system will be shipped on two Euro pallets using a freight company. It is already securely fastened to them. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and stretch film to provide maximum protection for transport. The system itself is secured with "transport safety screws"... Shipping costs within Germany are included, I will cover them!!! So, within Germany: FREE SHIPPING!!! The measuring system should definitely be set up and commissioned by a Taylor Hobson service technician, who can then recalibrate the system on-site. This is now recommended after a few years. Errors can be made during setup and commissioning. For example, some locking screws are installed for transport, and if you forget to remove them, the system may be damaged when it starts up... A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!!

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 1,400 kg, input voltage: 400 V, total length: 1,150 mm, total width: 900 mm, total height: 1,910 mm, OPEN 16T ECCENTRIC PRESS – THE MACHINE HAS MINOR DAMAGE AS SHOWN IN THE PHOTOS: THE ELECTRICAL CONTROL CABINET AND THE OIL DRIP TRAY ARE DENTED. Professional 16-ton eccentric press designed for punching, stamping, bending and forming metal components. The open back frame construction provides easy access to the working area and comfortable machine operation. The rigid and durable construction ensures stable operation even during intensive industrial use. The machine is equipped with a dry pneumatic friction clutch and modern safety systems. Main machine features: • Open back frame design • Rigid and durable construction • Fixed working table • Transversely mounted crankshaft • Horizontally mounted crankshaft • Dry pneumatic friction clutch • Lifting balance device • Safety valves • Manual control • High production efficiency TECHNICAL SPECIFICATIONS: • Pressing force: 16 t • Stroke under load: 2 mm • Slide stroke: 0–70 mm • Number of strokes: 125 strokes/min • Maximum die height: 170 mm • Distance from slide block to frame: 170 mm • Working table dimensions: 320 × 480 mm • Table hole diameter: Ø100 mm • Opening dimensions: 160 × 240 × Ø210 mm Hnsdpszp I Tzsfx Achsr • Slide dimensions: 180 × 200 mm • Shank hole size: Ø40 × 60 mm • Distance between columns: 220 mm • Table thickness: 60 mm • Maximum tilt angle: 25° • Motor power: 1.5 kW • Machine dimensions: 1150 × 900 × 1910 mm • Weight: 1400 kg Equipment: • Light curtains • Mechanical guards • Ejector in lower table Delivery conditions: • Delivery to customer possible • Shipping cost calculated individually • Brand new machine • 12-month warranty • Warranty and after-sales service • CE declaration of conformity Additional delivery information: • Delivery can be arranged throughout Europe • Shipping cost calculated individually depending on customer location • Fast order processing • Personal collection possible • Machine professionally secured for transport

Condition: used, functionality: fully functional, mileage: 3,52,000 km, first registration: 12/2017, fuel type: diesel, maximum load weight: 1,050 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, energy efficiency: B, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6b, suspension: steel, number of seats: 3, loading space length: 4,300 mm, loading space width: 2,140 mm, loading space height: 2,360 mm, Equipment: ABS, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, power mirror, soot filter, spoiler, start-stop system, truck registration, VOLKSWAGEN CRAFTER Year 12/2017, approximately 352,000 km The engine was overhauled at approximately 330,000 km, specifically: crankshaft replacement, bearing replacement + turbo repair (invoice available). EURO 6B, 2.0 engine, 177 hp, automatic transmission, cruise control, air conditioning, central locking, sprung driver's seat + armrest, electric windows, electric and heated mirrors, touchscreen radio with Bluetooth, Start&Stop, fog lights, and other standard accessories. Body with adjustable side rails, internal dimensions of 4.30 x 2.04 meters, minimum side loading opening of 2.36 meters, side panels of 40 cm, sliding tarpaulins on the sides with tensioning system, and 2 rear doors. Hnsdpfxozh U Nts Achor Total weight 3,500 kg, payload 1,050 kg. Valid inspection until JUNE 2027. MASON TRUCKS Via Vicenza, 31 Vedelago (Treviso)

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 6,500 h, machine/vehicle number: S40-5934, load capacity: 227 kg, lifting height: 15,700 mm, fuel type: diesel, Equipment: all wheel drive, Genie S45 Telescopic Boom Lift Top maintained – extensive repairs – ready for immediate use For sale is a Genie S45 telescopic boom lift in very good technical condition. The boom lift has undergone extensive refurbishment and regular maintenance in the last two years. All invoices are available and can be viewed during inspection. Technical data • Manufacturer: Genie • Model: S45 • Year of manufacture: 2001 • Operating hours: approx. 6,500 h • Working height: 15.7 m • Platform height: 13.7 m • Lateral reach: 9.65 m • Load capacity: 227 kg • Drive: Diesel • Four-wheel drive • Serial number: S40-5934 Extensive investments: In 2023, the engine underwent extensive overhaul (invoice for €9,013 gross): • Engine completely serviced • Connecting rod and crankshaft bearings replaced • Piston rings replaced • Cylinder head gasket replaced • Starter replaced Hodezrgmrjpfx Achonr • Oil, air, and diesel filters replaced • V-belt replaced • Numerous other wear parts replaced In 2024, further extensive maintenance and hydraulic work was carried out (invoice for €5,254 gross): • Swing drive motor replaced • Hydraulic pump sealed • Hydraulic hoses replaced • Hydraulic oil replaced • Engine oil and all filters replaced • Machine completely lubricated • Functional test performed • Safety inspection performed Condition • Technically fully functional • Ready for immediate use • Normal age-related signs of wear • No known defects • Inspection and test operation possible at any time by appointment. In 2023 and 2024, over €14,000 was invested in the machine. As a result, the boom lift is in significantly better technical condition than many comparable machines of this year of manufacture. Price: €13,900 net negotiable (16,680 € gross) Location: Laakirchen (Upper Austria)

Condition: excellent (used), mileage: 2,85,261 km, first registration: 10/2017, empty load weight: 15,076 kg, maximum load weight: 16,924 kg, overall weight: 32,000 kg, axle configuration: 8x4, next inspection (TÜV): 11/2026, brakes: retarder, driver cabin: day cab, suspension: steel-air, number of beds: 1, Year of construction: 2017, Equipment: air conditioning, differential lock, full service history, navigation system, parking heater, Volvo FH 500/8x4/Meiller 3-way tipper/Engine damage/Retarder/Air conditioning/Boardmatik • Manufacturer: Volvo • Model: FH 500 • Mileage: 285,261 km • First registration: 10/2017 • Power: 375 kW / 510 hp • Wheel arrangement: 8x4 • Suspension: Leaf/Air • Transmission: Automatic • Retarder • Differential • Three-way tipper MEILLER D421 • Radio • Electric tarp • Rear view camera • Auxiliary heater • Long-distance cab Hnodpfxszk I Ins Achsr • 1 bed • Navigation system • Roof hatch • Unladen weight: 15,076 kg • Payload: 16,924 kg • Permissible total weight: 32,000 kg • Euro: 6 • Engine damage (crankshaft bearing damage) • MOT valid until November 2026 • German vehicle • German documents • This offer is non-binding and subject to change. • Subject to prior sale. • Errors and/or typos not excluded. • Sale subject to our general terms and conditions.

Condition: new, Year of construction: 2026, machine/vehicle number: 26.07.06, functionality: fully functional, Fresan FP 160P - C Frame Eccentric Press - 160 Tons (1600kN) TECHNICAL DATA: * Power: 160 tons (1600kN) * Strokes Per minute: 55 (variable) * Ram-Table Distance: 500 mm * Stroke Adjustment: 0 - 172 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 800 x 1100 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations Hjdpfxonyh S Rj Achonr * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: new, Year of construction: 2026, machine/vehicle number: 26.07.06, Fresan FP 60P - C Frame Eccentric Press - 60 Tons (600kN) TECHNICAL DATA: * Power: 60 tons (600kN) * Strokes Per minute: 65 Hsdsnwpc Iopfx Achjnr * Ram-Table Distance: 365 mm * Stroke Adjustment: 0 - 100 mm * Ram Adjustment: 70 mm * Table Dimensions: 500 x 700 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces (6-slide version available, optional) * Mechanical fuse for overload protection * Pneumatic counterbalance cylinders * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: new, Year of construction: 2026, machine/vehicle number: 26.07.06, functionality: fully functional, Fresan FP 20P - C Frame Eccentric Press - 20 Tons (200kN) TECHNICAL DATA: * Power: 20 tons (200kN) * Strokes Per minute: 160 * Ram-Table Distance: 240 mm * Stroke Adjustment: 0 - 50 mm * Ram Adjustment: 40 mm * Table Dimensions: 360 x 550 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table Hnjdpfx Ajnwfp Iechor * Ram with 4 sliding surfaces * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Automatic central lubrication * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: new, Year of construction: 2026, machine/vehicle number: 26.07.06, functionality: fully functional, Fresan FP 15P - C Frame Eccentric Press - 15 Tons (150kN) TECHNICAL DATA: * Power: 15 tons (150kN) * Strokes Per minute: 200 * Ram-Table Distance: 215 mm * Stroke Adjustment: 0 - 40 mm * Ram Adjustment: 40 mm * Table Dimensions: 320 x 490 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) Hnsdpfx Acsnvfv Njher * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Automatic central lubrication * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: new, Year of construction: 2026, machine/vehicle number: 26.07.06, functionality: fully functional, Fresan FP 10P - C Frame Eccentric Press - 10 Tons (100kN) TECHNICAL DATA: Hedpfxsnvfmys Achsnr * Power: 10 tons (100kN) * Strokes Per minute: 200 * Ram-Table Distance: 190 mm * Stroke Adjustment: 0 - 40 mm * Ram Adjustment: 35mm * Table Dimensions: 265 x 370 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Automatic central lubrication * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: new, Year of construction: 2026, machine/vehicle number: 26.07.06, functionality: fully functional, Fresan FP 130P - C Frame Eccentric Press - 130 Tons (1300kN) TECHNICAL DATA: * Power: 130 tons (1300kN) * Strokes Per minute: 55 (variable) * Ram-Table Distance: 500 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) Hnodpfx Acsnyh Sioher * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: new, Year of construction: 2026, machine/vehicle number: 26.07.06, functionality: fully functional, Fresan FP 100P - C Frame Eccentric Press - 100 Tons (1000kN) TECHNICAL DATA: * Power: 100 tons (1000kN) * Strokes Per minute: 60 (variable) * Ram-Table Distance: 445 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) Hjdpfenxh T Rsx Achonr * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: new, Year of construction: 2026, machine/vehicle number: 26.07.06, functionality: fully functional, Fresan FP 80P - C Frame Eccentric Press - 80 Tons (800kN) TECHNICAL DATA: * Power: 80 tons (800kN) * Strokes Per minute: 60 (variable) * Ram-Table Distance: 400 mm * Stroke Adjustment: 0 - 112 mm * Ram Adjustment: 80 mm (motorized) * Table Dimensions: 600 x 900 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) Hnjdpfx Acjnxh Hrjhjr * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: new, Year of construction: 2026, machine/vehicle number: 26.07.06, functionality: fully functional, Fresan FP 40P - C Frame Eccentric Press - 40 Tons (400kN) TECHNICAL DATA: * Power: 40 tons (400kN) * Strokes Per minute: 125 * Ram-Table Distance: 320 mm * Stroke Adjustment: 0 - 84 mm * Ram Adjustment: 70 mm * Table Dimensions: 450 x 650 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) Hsdpfx Aonwmh Sschonr * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Automatic central lubrication * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: new, Year of construction: 2026, machine/vehicle number: 26.07.06, functionality: fully functional, Fresan FP 30P - C Frame Eccentric Press - 30 Tons (300kN) TECHNICAL DATA: * Power: 30 tons (300kN) * Strokes Per minute: 140 * Ram-Table Distance: 305 mm * Stroke Adjustment: 0 - 60 mm * Ram Adjustment: 60 mm * Table Dimensions: 400 x 600 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Automatic central lubrication * Speed control with AC inverter * HMI / Touchscreen operator panel Hedpfx Acenwfrujhenr * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: used, mileage: 5,78,000 km, power: 75 kW (101.97 HP), fuel type: diesel, gearing type: mechanical, first registration: 03/2000, next inspection (TÜV): 04/2018, emission class: euro2, number of seats: 9, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1030 Hjdpfx Acoy Evgwshjnr * Papamobil * VW T4 * Bodybuilder: Ernst Auwärter * AIR CONDITIONING * Auxiliary heater * Side windows made of thermal insulation glass * 7+1+1 seats (passenger car registration) * Registration: licensed for public transport with pram/wheelchair space * Seat belts fitted to all seats * Vehicle is currently registered * Tyres in good condition * Excerpt from repair history in recent years: * Vehicle underwent a complete overhaul in 2013!!! * New brakes (at approx. 576,498 km), coil spring, exhaust including flex pipe, VW invoice available for brake system, brake hoses, etc. Gear linkage renewed for EUR 1,295, stabilizer bars replaced (560,757 km), complete body and paint restoration (CD documentation/proof available), timing belt including water pump and tensioner/injection pump timing belt replaced, serpentine belt replaced, crankshaft pulley replaced, all seating including carpet replaced, ... * VERY EYE-CATCHING AND BEAUTIFUL VEHICLE FOR SPECIAL OCCASIONS, WEDDINGS, AS PUBLIC TRANSPORT OR FOR HANDICAPPED TRANSPORT.

Condition: excellent (used), functionality: fully functional, mileage: 1,74,000 km, power: 180 kW (244.73 HP), fuel type: diesel, tire condition: 50 %, axle configuration: 4x4, fuel: diesel, color: white, gearing type: automatic, Year of construction: 2014, Equipment: ABS, Android Auto, Apple CarPlay, air conditioning, airbag, car registration, cruise control, electronic stability program (ESP), navigation system, non-smoking vehicle, power assisted steering, Volkswagen Transporter T5 Edition 2.0 BiTDI 180 hp DSG 4Motion – 2014 I am selling my 2014 Volkswagen Transporter T5 Edition, with automatic DSG transmission and 4Motion all-wheel drive. Features: Year: 2014 Mileage: 174,000 km Reconditioned engine installed at 168,000 km (approximately 5,000 km ago) Automatic DSG transmission 4Motion all-wheel drive Edition trim level Recent work carried out: Reconditioned engine New crankshaft New connecting rods New cylinder head New valves and tappets Reconditioned turbocharger Reconditioned injectors New EGR valve New DPF (diesel particulate filter) New intercooler New front driveshaft DSG transmission oil change (performed by a professional) Differential oil change The mechanical work was carefully carried out by myself, with the exception of the DSG transmission oil change. Invoices for parts and the transmission oil change are available. Equipment: Air conditioning Android car radio with Apple CarPlay Cruise control Electric mirrors Tow hitch 4 Michelin Alpin tires in very good condition Utility vehicle conversion with wood paneling and plywood flooring The vehicle is in excellent mechanical condition, starts perfectly, and drives very well. Hnedpfszqgv Dsx Achor

Condition: good (used), Bezel, setting stick, lynette -for: Crankshaft grinding machine -Technical drawing: see photos Hsdjg A I Euopfx Achenr Quantity: 1 piece available -Dimensions: 380/85/H200 mm -Weight: 13.4 kg

Condition: good (used), Bezel, setting stick, lynette -Bench: for crankshaft grinding machine Hodowv Na Sjpfx Achjnr -Peak height: 170 mm -Dimensions: see photos -Dimensions: 205/115/H220 mm -Weight: 11.1 kg