Used Cross Cutter for sale (7,075)

Condition: used, Year of construction: 2005, Cuts fillets into portions by weight The Marel IPM3 X300 is a portion cutter for fish, chicken and meat fillets. Each piece is scanned on the belt, and the machine works out where to cut to get portions of a fixed weight or length. You get more out of every fillet with less trim left over. The machine was built in 2005 and has a perforated belt 280 mm wide. Settings are made on the control panel with a colour screen. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Hjdpsz Nc Rrefx Airew Type: Portion cutter (fixed weight or fixed length) Products: Fish, chicken and meat fillets Belt: Perforated, 280 mm wide Scanner: Cameras with laser line Controls: Control panel with colour screen Electrical: 3 x 380–480 V Construction: Stainless steel

Condition: ready for operation (used), Year of construction: 2016, WEINIG OPTICUT S50 – OPTIMIZING SAWMILL For sale: a professional Weinig OptiCut S50 optimizing sawmill. The machine is from 2016 and is in perfect technical condition. It is currently connected and operational, allowing for a demonstration during operation. Machine specifications: • Model: Weinig OptiCut S50 • Year of manufacture: 2016 • Overall length: 11.30 m • Width: 1.40 m • Condition: excellent • Machine connected and ready for operation • Available from 10.10.2026 Hedpfxoz Du Hbs Airew The machine can be inspected and tested before purchase.

Condition: ready for operation (used), functionality: fully functional, Manual feed of the cutting head Disc diameter 350 mm 3000 rpm Cutting angle adjustment -45/+45 degrees Pneumatic clamping Cutting process initiated with two buttons Hjdpfx Asz E Dy Hoirjw Safety switch Minimum air pressure 6 bar Year of manufacture 1995 400V

Condition: excellent (used), Year of construction: 2016, operating hours: 10,000 h, functionality: fully functional, Complete painting system comprising two Cefla Flexispray spraying units and three Cross Oven drying ovens. The system was purchased new in 2016 and is customized for painting softwood interior door frames for the Dutch market. The system includes the following units: Cefla Cross Oven #1 Width 320 cm, length 300 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #1 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Hedpsz Hbm Tjfx Airow Cefla Cross Oven #2 Width 320 cm, length 390 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #2 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #3 Width 570 cm, length 700 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. The painting system is installed at the factory and is available for a test run. The system is sold "as-is," and its dismantling, relocation, and transport are the buyer's responsibility. Sales price for the system is 120.000 EUR VAT 0% and is negotiable. If there are several buyers, we reserve rights to sell the system to the highest bidder.

Condition: excellent (used), Year of construction: 1962, Ref: 11154 . 1962 Heidelberg SBG Cylinder Professionally converted for precision die cutting and creasing applications. Features: For die-cutting / creasing in packaging and commercial finishing Used for carton production, creasing, embossing, or die-cutting Cylinder mechanism ensures consistent pressure distribution Ideal for materials such as cardboard, paperboard, and synthetic substrates Highly efficient, accurate and durable Long-term mechanical reliability. Comprising; Single sheet suction feeder Spring loaded gripper action Chain delivery 2 Standard chases. Specification: Hsdpfx Aisz Ek Nusrsw Max sheet size: 570 × 770 mm Min sheet size: 210 × 280 mm Max. impression area: 530 x 760 mm Speed: Max. 4,600 sheets/hour Machine size (L×W×H): 3,500 × 2,000 × 1,850 mm Net weight: 5,850 kg

Condition: used, Year of construction: 2013, KONGSBERG CUTTERS HAVE SUPERB BUILD QUALITY, COMPREHENSIVE TOOLING, CUTTING ACCURACY AND GREAT SOFTWARE REFURBISHED 2013 KONGSBERG XP24 CUTTER Excellent condition 3200 x 1680mm work area 1Kwatt Router for milling (refurbished new spindle) Heavy duty tool / large & small crease wheels V Notch tool, high force knife, oscillating knife I cut software / PC New conveyor belt recently fitted 3 Phase extractor, 6kwatt Busch vac pump & silencer Hodpfxjz S Hx He Airow

Condition: used, Kraus and Reichert Kuris KVS700 Cutting Knife Machine, Fabric Cutter, Textile Item condition: Used and tested for functionality. _RD 6 kg Textile Machines Hedpjpitkgjfx Airjw Find more textile machines – new and used – in our shop! International shipping costs available upon request!

Condition: used, Lista drawer cabinet with milling tools Lista drawer cabinet Number of drawers: 13 Type of extension: Full extension Very high load-bearing capacity due to precise and stable construction made of high-quality, welded sheet steel Color of cabinet: Reseda green, RAL 6011 Load capacity per drawer: 200 kg External dimensions W x D x H: 720 x 710 x 1000 mm Contents: Hjdpfx Ajq Aa I Tsirew Metal circular saw blades Disc milling cutters, cross-toothed and coupled Disc milling cutters, cross-toothed Angle, semi-circular milling cutters Dovetail milling cutters Semi-circular milling cutters Thread milling cutters More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 1982, Format: 0x0 Hsdpfxjx Rh Dxs Airew Equipment: Corner cutter, manual

Condition: used, Year of construction: 1973, This Krause C64-50 Autofeed Die Cutter is a powerful machine designed for precise and efficient die cutting work. With a maximum format of 600 x 500 mm, it offers the flexibility to handle a wide range of materials. The machine is currently located in the Netherlands and is standing still, which represents an ideal opportunity for those looking for a high-quality die cutting machine. Format: 600 x 500 mm Min. Size: NULL Max. Size: Maximum sheet size: 600 x Hsdpfxovfx Ulj Airow Net Weight: 8.200 kg Measurements: L: 3.320 W: 2.440 H: 2.13 Equipment: Krause autofeed die cutter Max. Size: 60 x 50 cm (23 x 19 inch) Processable materials: Paper, heavy cardboard, corrugated board, plastics, and leather Maximum cutting pressure: Approx. 40???50 tons (engineered for high-precision heavy die cutting)

Condition: excellent (used), Year of construction: 2015, Tipper Tie TTChop 20 Cutter Based on more than 130 years of experience in design and a keen sense of innovation, the TTChop cutter generation TIPPER TIE sets new standards in grinding technology. TTChop20 combines functionality and advanced technology. This is an extremely versatile and yet specialized machine for each individual application. The production of raw coarse or fine sausages, tender boiled sausages or emulsions brings the same remarkable results as gentle mixing and dipping of a wide variety of components. Comes with a lot of extra knifesets. Manufacturer: Tipper Tie Model: TTChop 20 Year: 2015 Production Hours: 9.338 hours Capacity: 200 liter Max. load elevator: 250 kg. Power: 400V / 50Hz / 98kW Machine Dimensions LxWxH: 3.250x2.600x2.200 mm Hodpev Eamcsfx Airjw Machine Weight: 4.100 kg.

Condition: like new (used), The MAGURIT FROMAT 053 is an industrial-grade guillotine designed specifically for the highly efficient pre-cutting of frozen meat blocks at temperatures as low as -30°C. Perfectly suited for both medium-sized operations and heavy-duty industrial use, this machine significantly optimizes the entire production workflow. It features a built-in pneumatically operated lifting table (chute) that effortlessly transports heavy blocks directly into the cutting room, ensuring maximum operator ergonomics and workplace safety. A specialized block holding device guarantees stability during operation, resulting in the desired product quality and a perfectly clean cutting edge with every stroke. Accommodating massive frozen blocks up to 500 mm in width and 340 mm in height, and powered by a robust 5.5 kW main motor, the Fromat 053 delivers exceptional continuous performance and reliability for modern meat processing facilities. Technical Specifications: Manufacturer: Magurit Model: FROMAT 053 Type: Frozen meat block cutter / guillotine Operating Temperature: Down to -30°C Hsdpfx Aezhhc Teirjw Max Block Dimensions (WxH): 500 mm x 340 mm Loading System: Pneumatically operated lifting chute Main Motor Power: 5.5 kW Voltage: 400 V / 50 Hz Features: Clean cutting edge, ergonomic workflow, dedicated block holding device Application: Medium-sized and large industrial meat processing plants

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head corner cutter -Type: Ø 160 mm -Recording: SK50 -Dimensions: Ø 160 x 250 mm Hodpfxozqy Nws Airow -Weight: 11.2 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Machine model: ALC400G Hedpfsyu Nqmox Airjw Max. workpiece dimensions (W×D×H): 600 × 470 × 240 mm (Flushing) Max. workpiece dimensions (W×D×H): 600 × 470 × 230 mm (Submerged) Max. workpiece weight: 500 kg (Flushing) Max. workpiece weight: 350 kg (Submerged) Work tank dimensions (W×D): 850 × 610 mm X axis travel: 400 mm Y axis travel: 300 mm Z axis travel: 250 mm U axis travel: 150 mm V axis travel: 150 mm Taper angle (at workpiece thickness 130 mm): ±25° Wire diameter: Ø0.1 – Ø0.3 mm Wire feed speed (max): 420 mm/sec Wire tension: 3 – 23 N Machining method: Flushing / Submerged Distance from floor to table top: 995 mm Wire bobbin weight: 8 kg Machine dimensions (W×D×H): 2,115 × 2,500 × 2,230 mm Machine installation space (W×D): 3,350 × 3,850 mm Machine weight (including power supply): 3,400 kg Air pressure: 0.5 MPa Air consumption: 30 NL/min Total power input: 3-phase, 50/60 Hz, 13 kVA Dielectric tank external dimensions (W×D): 700 × 2,155 mm Dielectric tank weight (empty): 450 kg Dielectric tank capacity: 675 liters Dielectric fluid filtration method: 3 replaceable paper filters (internal pressure type) Deionizer: Ion-exchange resin (18 L type)

Condition: good (used), functionality: fully functional, Sturdy, mobile roundwood and timber cross conveyor. Equipped with 5 chain strands. Electric drive for mobility. Track width 1.60 m. Hsdpfx Aszum Uusirjw

Condition: used, Letter Press Tiegel in good condition - DIE Cutter Heidelberg OHT in einem guten Zustand. Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1953 - Serial-No. 43717 Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Hjdpfx Aioztzp Rsrsw On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2005, condition: excellent (used), functionality: fully functional, machine/vehicle number: 14764, Key operating data Motor power (standard): 5.5 kW Cutting diameter of the rotor: 300 mm Rotor width / cutting length: 125 mm Rotor speed: 230 rpm (slow-speed system for noise and dust reduction) Average output (throughput): 80 kg/h (depending on the type of plastic and the mesh size of the screen) Power supply: 3 x 400 V + N, 50 Hz Cutting system and working chamber Hjdpfx Ajztplgjirew Opening of the shredding chamber: 450 x 335 mm Opening of the feed hopper: 490 x 420 mm Number of rotating knives (on the rotor): 10 Number of fixed knives (on the stator): 2 Cutting geometry: Shear cutting with a slanted rotor, which facilitates the handling of three-dimensional parts Standard screen: Mesh size 6 mm (round, interchangeable) Particle size of the recovered regranulate: Standard 4–8 mm (depending on the installed screen) External dimensions and weight Machine length: 1100 mm Machine width: 900 mm Machine height: 2100 mm (for the version with a high stand frame for dust extraction) Total weight: 500 kg Additionally: new replacement knives, three screens with 5, 6 and 8 mm Cross magnet in the feed hopper!

Condition: used, Year of construction: 2017, functionality: fully functional, Rotox FWS 381 Hedpfx Ajzpygyjirjw

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Hsdpfx Aezzrutsirew Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 13100019, type of input current: three-phase, overall weight: 1,000 kg, For sale: a professional log edging saw (optimizing saw) from the renowned German company Winter Holztechnik, model Optimax 100. The machine is fully functional, regularly serviced, and ready for immediate operation. It is ideally suited for the fast and precise removal of defects and the preparation of elements with fixed lengths in joinery workshops. Key features and advantages: Hsdpfx Ajzzw Uleirsw PLC control: Intuitive touchscreen panel for easy programming. Multifunctionality: Capability for sequential cutting (memory for up to 10 dimensions) and cutting lines marked with fluorescent chalk. Efficiency: The machine can replace the work of several people, offering a speed of up to 80 cycles per minute. Precision: Very high cutting accuracy of +/- 1 mm. Technical data: Saw motor power: 7.5 kW. Feed motor power: 2.0 kW (feed speed continuously adjustable up to 80 m/min). Cutting height: max. 100 mm. Blade diameter: Ø 455 mm (bore 30 mm). Minimum material length: 300 mm. Power supply/Air: 400V / 8 bar.

Condition: excellent (used), Your contacts within our company: Hjdoiimtqjpfx Airjw Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Technical data for the pallet racking crossbeam: Racking system: META (Thyssen) Included in the scope of delivery: 1x Pallet racking crossbeam, used Material color: orange Crossbeam type: HN 100|20 Box profile: 100 x 50 mm Clip: 3 HK (hooks) Clear width: 2,700 mm Maximum load per crossbeam pair: 2,100 kg, with evenly distributed load 2x Locking pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting out General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery. Our services at a glance: (Prices upon request) Assembly, installation Our general assembly conditions apply Racking inspection Racking inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Year of construction: 2016, Holac WS 150 Cutter The WS 150 is the multipurpose dicer or size reduction machine for extra-high output levels. Its continuous product flow and cutting operation make it the perfect partner for pre-cutting meat and fat. Its gentle product handling, which avoids build-up of pressure or heat, guarantees the highest possible quality of the end- product. Single-part, all-plastic feed-auger, independent from cutting grid Adjustable speed of cutting blade and auger Product window in blade chamber Simple and effective sanitation Integrated lift-tilt mechanism (optional) Easy to integrate into continuous product lines Two-part grid Hardened shear edges and product stabilisers Simple and safe grid fixation Manufacturer: Holac Model: WS 150 Year: 2016 Capacity (depending on product): Max. 10.000 kg/h Loading dimensions WxHxL: 150x150x900 mm Feed motion: 1-75 mm Power supply: 16 kW Hsdpfx Ajub Rcuoirsw Cutting grid sizes: 6x6 mm – 75x75 mm Machine dimensions LxWxH: 2.275x1.325x2.170 mm Machine weight: 1.350 kg.

Condition: new, Type: SC 330 Completely made of special stainless steel 330-liter bowl made of stainless steel Frequency speed regulation 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in set Machine dimensions in cm: Width: 243 Hedpfx Aisunag Rorew Depth: 230 Height: 182 Electric power: 80 kW Voltage: 400 V, 50 Hz

Year of construction: 2019, condition: like new (used), Board cross conveyor for sale. Six controls. Distance between controls 0.85 m. Width 4, 40m. Length 2.80 m. Drive, motor reducer 1.5 kw. In full working order, after repair. Hjdpenl Dvlsfx Airjw

Condition: new, Technical data for the pallet rack traverse: Shelf system: Kimer The scope of delivery includes: 01x pallet rack traverse, new Material color: RAL2004 pure orange Type of cross beam: TB120x50 agraffe: 4 HK (hooks) clear width: 2.700 mm max. load per truss pair 2.400 kg, with evenly distributed load Your contact persons in our company: Mr.: Andre Evering Hodjnmytcepfx Airow Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.