Used Cutter Tube for sale (4,759)

Condition: used, functionality: fully functional, Kuper Hymmen AS 220 Veneer Guillotine Cutting width: 2200 mm Cutting depth: 1020 mm Electronic cutting fence travel Bdedpjzt Sc Ujfx Abtsg Knife activation: two-hand control for safety Safety gate Guillotine motor: 4 kW Clamping motor: 1.5 kW

Condition: used, This Cedima joint cutter, manufactured in 2018, will be auctioned online as part of our industrial auction / machinery auction for warehouse clearance – Schnelle & Co. Ebi GmbH – construction equipment, power tools, and accessories. Bdsdpfozv Sbcex Abtsg You can find this and many other items on our platform.

Condition: used, Year of construction: 2017, functionality: fully functional, Rotox FWS 381 Bsdozpygyopfx Abtodg

Condition: good (used), Samed Innovazioni MM 1 Corner cutter for hardcovers Produced in Italy, Samed Innovazioni Rebord. Very good condition. This is a professional, production device for cutting corners for hardcover. Year of production 2014. Bdodpfeztn Tijx Abteg Solid construction ensures precision of operation. Interchangeable knives. Adjustable cutting depth. One set of knives included.

Condition: new, ML-1400 NXL die cutter The machine is brand new. It is the heaviest die cutter in this format. Bdsdoztn Ruspfx Abteg Format: 1400 × 1000 mm Weight: 6500 kg 380 V power supply Engine: 5.5 kW Working speed 15 +/- 2 cycles / min Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 modes of operation: continuous, with time delay, manual – central lubrication – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in EU. Possibility of testing in the showroom in Radom.

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container. Bdsdpfx Ajztn N Robtjg

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Bsdpfx Abjztn I Hjtsdg Format of the press 855x1230mm Weight 6900kg Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake – control panel – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter A very rare model on the market. The machine is ready to work, in very good technical condition. After inspection. Suitable for die-cutting. Central lubrication. Format 40×57 cm Weight 3500 kg Bdodpfsztn Iyjx Abtsg Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks.

Condition: used, Profile cutter head for the professional, machine-based machining of solid wood, wood-based materials and other suitable materials. Technical data: - Blade: RVZ Z2 Bjdpfxszv N Ims Abtsdg - Cutting circle (ø): 122 mm - Bore: 40 mm - Marking: MEC - Length: 80 mm - Material: Steel

Condition: used, Planer head for the professional, machine-based machining of solid wood, wood-based materials and other suitable materials. Technical data: - Blade: RVZ Z2 - Cutting diameter (ø): 122 mm - Bore: 40 mm - Marking: MEC - Length: 100 mm - Material: Steel Bodpjzv N Aqsfx Abtjdg

Condition: used, Planer head for the professional, machine-based machining of solid wood, wood-based materials and other suitable materials. Technical data: - Blade: RVZ Z2 - Cutting circle (ø): 122 mm Bdedpfezv Izxjx Abtog - Bore: 40 mm - Marking: MEC - Length: 100 mm - Material: steel

Condition: new, Max. capacity steel tube (mm) 32x2 Max. capacity stainless steel tube (mm) 25x1.5 Max. capacity steel profile (mm) 30x30x1.5 Bdodpozuklkofx Abteg Min. Tube (mm) 8 Max. Radius (CLR) 225 Min. Radius (CLR) 20 Control system PLC Max. bending angle (°) 190 Screen 10” PC Windows touch screen

Condition: good (used), functionality: fully functional, Year of construction: 2016, laser power: 3,000 W, TruLaser Tube 5000 fiber (T06) X Working area max.: 6500 mm Y Working area max.: 200 mm Laser power: 3000 Watts Control system: SINUMERIK 840D SL Standard equipment Machine - Machine table for automatic loading up to 6.5 m - Max. outer diameter of the circle: Round tube up to 152 mm, Rectangular tube up to 170 mm - LoadMaster tube 6.5 m with grouping chamber - Part removal station for 3 m finished part length (incl. scrap conveyor with container) - Part stacking station (with conveyor table and conveyor table extension) - NitroLine - FocusLine - Laser power control - Programmable cutting gas - Automatic start/stop system - Work area lighting Laser - Solid-state laser TruDisk 3001 with one laser output Bodpfx Abezv Tnwetedg - Maintenance log function - Laser chiller Cutting unit - Lens cutting head with 150 mm focal length - ControlLine Control system - Sinumerik 840DSL - Remote maintenance interface Data transfer - USB interface - RJ45 network interface Safety - CE certification - Light barriers - Compact dust extraction system (1500 Nm*/h) - Protective housing with certified safety panes Service - Network installation via teleservice Additional machine equipment - SeamLine Tube with inner detection - Adaptive clamping technology - Adaptive clamping feeding station - Adjustable feed chuck - Chip conveyor, longitudinal - Technology package for bevel cutting Automatic LoadMaster Tube 6.5 m - LoadMaster Tube 6.5 m at the rear - LoadMaster Tube 6.5 m tube diameter 15 mm - Unloading station 4.5 m - 1 set of clamping jaws - 1 set of guide rollers - Various support sets for round and rectangular tubes

Condition: new, Year of construction: 2026, BENDMASTER 70 Tube and Profile Bending Machine The BENDMASTER 70 tube and profile bending machine is an industrial, non-mandrel bending machine designed for precise bending of steel tubes, square profiles, and materials with larger cross-sections. Thanks to its robust construction, automated bending angle measurement system, and powerful drive unit, the machine provides repeatability, efficiency, and reliability – even during intensive production work. It is an ideal solution for heavy industry, construction, and industrial installation applications. Main advantages of the machine Non-mandrel bending system – enables tube bending without the need for a mandrel, simplifying operation and accelerating the production process. Maximum tube capacity of 70 × 5 mm – allows processing of thick-walled steel and structural tubes. 5 kW main drive motor – provides high torque and reliable bending performance even with demanding materials. Digital bending angle display – real-time monitoring of preset and actual values enables precise parameter adjustment. Two-speed operating system – 1.2 rpm during bending and 2.4 rpm during return movement increase overall cycle efficiency. Stable welded steel construction – ensures resistance to deformation and vibration, even under heavy loads. Dies for tube diameters 38.1 mm, 48.3 mm, and 70 mm – the machine includes tooling for the most commonly used industrial tube sizes. Design and technology The BENDMASTER 70 has been designed as a non-mandrel roller bending machine with an electro-hydraulic drive system, suitable for heavy-duty operation. The powerful 5 kW main motor enables stable and safe bending of large-diameter tubes. The digital bending angle measurement system integrated with the control panel allows precise programming and monitoring of operating parameters. The machine features a compact design and can be integrated into production lines. Precision and work efficiency The BENDMASTER 70 steel tube bending machine provides complete control over the bending process. The die rotation speed during bending (1.2 rpm) ensures accuracy and process safety, while the fast return speed (2.4 rpm) improves productivity. The ability to bend up to 180° allows the production of complete arcs and spiral shapes, including large-section structural tubes. The machine is designed for precise forming of components where dimensional accuracy is critical. Applications The BENDMASTER 70 bending machine is used in many industrial sectors, including: production of steel structures and load-bearing components, construction and installation industries, HVAC and heating system installations, production of railings, gates, and industrial fencing, prefabrication plants for piping systems. Standard equipment Digital bending angle measurement system Tube bending dies: Ø 38.1 mm Bdjdpfxsvugv Ao Abtsg Ø 48.3 mm Ø 70 mm Technical specifications Parameter Value Maximum tube bending capacity 70 × 5 mm Maximum square profile capacity 50 × 50 × 2 mm Maximum bending angle 180° Die rotation speed during bending 1.2 rpm Die rotation speed during return 2.4 rpm Main motor power 5 kW Overall dimensions 1300 × 700 × 900 mm Weight 680 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Bodpoww E Nrsfx Abtedg Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations

Condition: used, machine/vehicle number: 008005, Max width workable: 2440 mm Bedpfewu Aacjx Abtsdg

Condition: used, machine/vehicle number: 007393, Max width workable: 2500 mm Bdodowkrqiepfx Abtsg

Condition: refurbished (used), functionality: fully functional, warranty duration: 12 months, overall weight: 1,300 kg, input voltage: 380 V, input frequency: 50 Hz, Cutter Laska – type: K 60 Capacity: 60 liters with 2 speeds; Bdjdpfx Aezunxbsbtsg Dimensions: 1400 mm x 1400 mm x 1600 mm.

Condition: used, Year of construction: 1997, 3D UV dryer Superfici Elmag 2 tubes - 3D UV-dryer Superfici & conveyer - the pictures show the machine before overhaul - Producer Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min Bjdpszf N Edofx Abtjdg - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: new, Model CNC 114R1 Max. steel tube capacity (mm) 114.3 x 6 Max. stainless steel tube capacity (mm) 114.3 x 5 Min. tube diameter (mm) 32 Max. steel profile capacity (mm) 80 x 80 x 4 Max. radius (CLR) 300 Bjdpfx Abezt Ir Sstjdg Min. radius (CLR) 55 Control system PLC Max. bending angle (°) 190 Screen 17” Industrial PC with Windows touch screen Bending drive Hydraulic

Condition: new, Fully automated block cutting machine for pallet legs. Maximum length of raw material 6m. Bjdpewdutmjfx Abtsdg The machine suits all type of pallet production. OKKR-2006 can operate as a separate standing machine or as part of a production line. How does it work? The machine is fed block material on the chain infeed conveyor. The material is fed automatically and the machine cuts the blocks into the preinstalled length. OKKR-2006 can be programmed to cut several different lengths of blocks from the original piece of raw material. Maximum length of the raw material is 6m. Asssembled block size: Min / max length: 600 mm - 6000 mm Width min / max: 75 mm - 150 mm Thickness min / max: 75 mm - 100 mm Specifications Operators | 0 Length | 7,5 m Width | 2,5 m Height | 1,8 m Power | 7 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 450 L/min Should be filled and controlled | Lubrication points Machine capacity | 36 blocks/min Standard equipment | 1 electric motor for saw blade 1 electric motor for material infeed 1 electric motor for chain infeed Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 176308, Country of manufacture: Switzerland Voltage: 400 / 380 / 50 / 3 Net weight: approx. 350 kg Dimensions: 82x85x156 cm Installed power: max 2 kVA Customs classification: 8460.3930 TECHNICAL SPECIFICATIONS GRINDING WHEEL SPINDLE UNIT Spindle speed (both rotation directions): 2,500 / 3,500 / 5,000 / 7,100 rpm Grinding wheel motor power (2,800 rpm): 0.4 HP Vertical slide stroke (linear): 100 mm Micrometric stop adjustment travel: 25 mm Micrometric stop readout accuracy: 0.01 mm WORKPIECE SPINDLE UNIT Workpiece spindle speed (both directions, continuous): 100–900 rpm Motor power: 0.2 HP Indexing plate teeth count: 120 Angular vernier reading: 20' Collet type: W-20 Horizontal travel: 100 mm Rapid feed per handwheel turn: 2 mm Micrometric feed per handwheel turn: 0.1 mm Micrometric feed per scale division: 0.001 mm SPINDLE HEAD SWIVEL RANGE (a) Main direction: 165° Fixed ratchet increments: every 3° Increments with micrometric screw: every 2' (b) Grinding plane: approx. 15° Stop: at 0° Cross movement range: 80 mm Bdodpfx Asw T S Sqjbtog Micrometer travel: 25 mm Reading precision: 0.01 mm Extraction motor power (2,800 rpm): 0.25 HP All technical specifications provided without guarantee and subject to possible errors or omissions.

Condition: used, Year of construction: 1973, Indexing milling cutter with 3-roller feed spindle, 30 mm diameter. Bedpfx Ajzd Tg Ajbtodg Location: Nattheim.

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder, Type WL 6 Power: 18.5 kW Our WL 6 machine concept: The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF, plywood, veneer remnants, etc.) into fuel chips, achieving a significant volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be fed via a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 RPM Bedecbtpkepfx Abtsdg Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible edges Screen size: 10-60 mm possible (standard 15-20 mm) Paint finish: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) - Star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox limit switch - Presser bar - Very robust Weima WAP gearbox Recommended accessories - Log spacer (free-cutting hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - Table milling machine with swiveling milling spindle and table extensions Table milling machine with a swiveling milling spindle from -45° to +45° Stable steel cast iron construction Dynamically balanced milling head anchored to the work table Particularly robust design Smooth operation thanks to precision components and high weight Bdjdpfx Abjdqzcxstjg Standard with right/left rotation and electronic locking during direction change 5 speeds from 3000 - 10000 min-1 Speed change is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large work table made of cast iron for lasting precision Easy operation thanks to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence cheeks included as standard Powerful industrial motors Equipment details: Milling fence Milling fence with crank/handwheel adjustment from the front With numerical display Quick-change spindle Quick-change spindle MK 4 standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenon cutting operations and for slotting Scope of delivery: Manually swiveling milling spindle from +45° to -45° Speed display via LED on the front Aluminum fence cheeks Arc milling guard Right/left rotation of the milling spindle MK 4 quick-change milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article no.: 5220728 Technical data Dimensions of work table: 2500 x 810 mm Swiveling range of milling spindle: +45 to -45 degrees Usable length of spindle with Ø 30-35 mm: 140 mm Usable length of spindle with Ø 40-50 mm: 180 mm Milling spindle stroke: 90 mm Max. tool Ø for profiling: 250 mm Max. tenon tool Ø: 350 mm Max. form cutter tool Ø: 160 mm Max. tool Ø, plunge-cutting: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 min-1 Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle Ø on the fence: 1 x 120 mm Extraction nozzle Ø under the table: 2 x 80 mm Location: In stock at 54634 Bitburg - immediately available -