Used Cws 500 for sale (16,022)

Condition: good (used), Vemag Filler & Depositor Model Robot 500 Year 2016 Bwodpfoz Hl Uhox Andew Complete with guillotine

Year of construction: 2017, condition: used, spindle speed (max.): 5,000 rpm, turning length: 500 mm, CNC Lathe Manufacturer: DMG MORI Model: CTX beta 500 Year of manufacture: 2017 Control system: Heidenhain CNC-Pilot 640 Technical specifications: Turning length: 500 mm Spindle speed: 5,000 rpm Drive power - main spindle: 100/40% duty cycle (ED) 25/34 kW Tool interface: VDI 30 Number of tool stations: 16 positions Spindle operating hours: approx. 3,528 h Condition: used Bedps Ahkf Ssfx Andoww Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: excellent (used), For sale is an ABUS wall-mounted jib crane equipped with an HADEF electric chain hoist, Type 63/78EF. This set is designed for lifting and moving loads in workshops, warehouses, production halls, and assembly stations. The robust steel construction from ABUS ensures high strength and stability during operation. The crane is equipped with an HADEF electric chain hoist controlled by a pendant control. The design is suitable for mounting on a wall or steel column. Technical data: Crane manufacturer: ABUS Kransysteme GmbH Hoist manufacturer: HADEF Hoist type: 63/78EF Crane lifting capacity: 500 kg Hoist lifting capacity: 250 kg Total jib length: 204 cm Hoist year of manufacture: 1987 Crane year of manufacture: 2002 Power supply: 220/380 V Frequency: 50 Hz Motor power: 0.3 kW Lifting speed: 5.0 m/min Protection class: IP44 Chain: 5 × 15 mm (DIN 5684-8) Pendant control CE marking Bwsdpfx Ansz Sm Txjdew Condition: Used. Functional. Shows normal signs of use in the form of scratches, paint chips, and dirt, as visible in the photos. Visual condition consistent with age and use.

Condition: not inspected (used), functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm above cross slide: 315 mm revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. Bjdpfxeqwlmqo Andeww main engine power: 10kw mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg

Condition: excellent (used), Year of construction: 2011, KraussMaffei KM 500-4300 CX Manufacturer: KraussMaffei Model: KM 500-4300 CX ClassiX Year of manufacture: 2011 Operating hours: approx. 45,000 h Clamping force: 5,000 kN / 500 tons Machine type: Hydraulic injection molding machine for processing thermoplastic materials Control system: KraussMaffei MC5 Clamping unit Mold clamping force: 5,000 kN (500 tons) Mold opening force: 279.9 kN Plate movement force – opening: 137.1 kN Plate movement force – closing: 116.8 kN Dimensions of mounting plates: 1,270 × 1,200 mm Distance between columns: 900 × 800 mm Mold opening stroke: 1,170 mm Minimum mold height: 480 mm Maximum daylight between plates: 1,650 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection unit Screw diameter: 100 mm Injection volume: 2,827 cm³ Maximum injection weight (PS): 2,573 g Injection pressure: 1,490 bar Screw speed: 195 / 270 rpm (standard / option) Plasticizing unit in an abrasion-resistant version Screw non-return valve Open nozzle Hydraulic and electrical system Fully hydraulic clamping system Rated power of the pump motor: 90 kW Installed heater power: 44 kW Number of heating zones in the cylinder: 7 Number of dry cycles according to EUROMAP 6: 1,050 cycles/h Capacity of the hydraulic oil tank: 1,175 l Bedpfxo Ahw Iqe Andoww Control system KraussMaffei MC5 control system Color monitor Integrated operator panel 3 USB ports Dimensions and weight Length: 8,000 mm Width: 2,600 mm Height: 2,500 mm Machine weight with control cabinet: approx. 26,800 kg

Condition: used, Year of construction: 2017, Used straight-line edging machine, capable of mitering from 0° to 45°, Bavelloni Type VE500-V10, manufactured in 2017. Bedo Ahnnhopfx Andjww

Condition: used, Year of construction: 2014, We offer this used Hartford LG-500 vertical machining center, built in 2014. Manufacturer: Hartford Bwedpfo Agcwpsx Andew Model: LG-500 Machine type: Vertical machining center Year of manufacture: 2014 System: O.T.-MD System number: T14701342 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Sumbel Herold 500 Gluing Machine This machine is like new, fully functional and ready for production. This is the most valued brand among small laminating machines. Ideal for producing covers, decorative packaging, and more. Made in Germany. The machine operates on hot glue. It features a built-in heating plate and a water bath. Brass rollers. Infinitely adjustable: glue thickness, gap width, and speed. Working width: 500mm Power supply: 380V Weight: 60kg Bwsdjzz Hh Uspfx Andsw

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: MTP-FR400G-2026-001, workpiece weight (max.): 600 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 500 mm, total height: 2,080 mm, total length: 1,950 mm, total width: 1,600 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 300 mm, type of input current: three-phase, table width: 520 mm, overall weight: 2,600 kg, table length: 720 mm, warranty duration: 12 months, table load: 600 kg, input voltage: 380 V, input frequency: 50 Hz, CNC WIRE EDM MTP FR-400G – WORKTABLE TRAVEL 400 × 500 mm – BRAND NEW, DELIVERY IN 2 MONTHS Brand-new precision CNC medium-speed wire EDM machine with Panasonic AC servo drives, 300 mm maximum cutting thickness and ±0.003 mm machining accuracy. Rigid low-bed cast-iron base with C-type frame, constant-tension wire system and a modern industrial-PC control with 15" monitor – suitable for tool and die shops, mould makers and precision parts manufacturers. Key features • Worktable travel X/Y 400 × 500 mm, worktable 520 × 720 mm, load up to 600 kg • Maximum cutting thickness 300 mm, taper cutting ±6° / 80 mm (U/V travel ±25 mm) • Machining accuracy ±0.003 mm, best surface roughness Ra ≤ 0.6 µm • Panasonic 750 W AC servo motors on X and Y axes, no-backlash drive • C3 precision ball screws and P2 linear guideways (THK / HIWIN / Yintai) • Constant-tension wire transport system, wire drum with frequency-controlled speed • Rigid low-bed cast-iron base with C-type frame, resin-sand castings • Industrial PC control, 15" industrial LCD monitor, G-code and macro support, AutoCAD import, expert system for multi-cut programs • Automatic wire positioning: edge, hole centre, outer centre, corner, three-point circle • Power-off recovery, 100 coordinate systems, 1000 parameter sets, 2D/3D graphic display and simulation Technical data Worktable travel X / Y: 400 × 500 mm Worktable size: 520 × 720 mm Maximum workpiece load: 600 kg Maximum cutting thickness: 300 mm Cutting taper: ±6° / 80 mm Taper (U, V) travel: ±25 mm Maximum cutting speed: ≥ 240 mm²/min Machining accuracy: ±0.003 mm Best surface roughness: Ra ≤ 0.6 µm X/Y positioning accuracy: 0.007 mm; repeat accuracy: 0.003 mm Minimum feed increment: 0.001 mm Electrode wire diameter: 0.08 – 0.25 mm Pulse width: 1 – 256 µs (stepless); pulse interval 1:2 – 1:9 Power supply: 380 V ±10 %, 50 Hz, 3 phases Power consumption: ≤ 2.5 kVA Display: 15" industrial LCD monitor Bwsdpfxj Ahprce Andow Dimensions and weight Main machine body (L × W × H): 1950 × 1600 × 2080 mm Control cabinet (L × W × H): 950 × 800 × 1930 mm Water tank (L × W × H): 1100 × 650 × 1030 mm Weight of machine: 2300 kg Weight of electrical control cabinet: 300 kg Total weight (machine + cabinet): 2600 kg Standard equipment • Electrical control cabinet with industrial PC and 15" monitor • Water tank (dielectric / working fluid tank) • Mobile double-plate worktable support fixture • Operating manual and CE documentation Condition and availability Brand new machine, made to order. Waiting time for the machine is approx. 2 months in total, including delivery. Serial number: MTP-FR400G-2026-001. Terms Price net (excl. VAT), EXW Sokołów Podlaski. 12 months warranty on parts. Documentation and manual included. Delivery to any European destination possible – transport quote on contact.

Condition: excellent (used), Year of construction: 2004, operating hours: 5,423 h, spindle bore: 73 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 520 mm, spindle motor power: 15,000 W, total height: 2,230 mm, total length: 3,495 mm, total width: 2,050 mm, overall weight: 5,800 kg, CNC controller: Mitsubishi M-720BM (MAPPS 2) Bedpfe Ahul Dox Andeww Capacity X-axis travel mm: 260 Z-axis travel mm: 520 C-axis: 360º (0.001°) Turning length mm: 515 Max. turning diameter mm: ø: 356 Upper turret Tool holder: 12 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 15/11 Spindle bore mm: 73 Manufacturer: KITAGAWA Counter spindle Counter spindle travel mm: 525 Equipment Chip conveyor Signal lamp Tool measuring arm Workarea light Interface for Bar feeder Working time hours Under power: 7.456 Cutting Time: 5.423 Basic machine dimensions / weight Length mm: 3.495 Width mm: 2.050 Height mm: 2.230 Weight kg: 5.800

Condition: like new (used), Year of construction: 2011, functionality: fully functional, load capacity: 500 kg, arm reach: 2,550 mm, ROBOTIC ARM BRAND: ABB MODEL: IRB 7600 - 500 / 2.55 TECHNICAL SPECIFICATION PAYLOAD: 500 KG Bwodpfo Agv U Usx Andew MAX. REACH: 2550 MM CONTROLLER: IRC 5

Condition: excellent (used), Key Information: Type: Scissor lift / lifting table Load capacity: 500 kg Condition: used – fully operational Controls: remote up/down + emergency STOP Power supply: 230/400V Year of manufacture: 2012 Price includes: complete set as shown in the photos ⚙️ Technical specifications: Load capacity: 0.5 t (500 kg) Bjdpfxoz Sl Axj Andsww Lifting height: approx. 630 mm Motor power: 0.8 kW Operating pressure: 196 bar Weight: approx. 170 kg Table dimensions: approx. 90 x 60 cm Power supply: 3-phase 230/400V Protection rating: IP55 🛠️ Description: We offer a professional hydraulic scissor lift – ideal for use in workshops, manufacturing, and warehousing. The device allows for safe and convenient lifting of heavy components to an ergonomic working height. Features include: - Stable scissor construction - Hydraulic lifting system - Remote control (up/down + emergency STOP) Perfect for: - Assembly work - Packing - Service and production - Loading and unloading 📦 Set includes: - Scissor lift - Hydraulic power unit - Controls (remote) 🚚 Shipping: - Pallet shipping - Local pick-up possible

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Fully refurbished OPS Ingersoll Gantry 500 Wire EDM Machine – in top technical and visual condition The machine underwent a comprehensive and professional overhaul in our facility and is in very good condition both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric survey, alignment, and additional check using a laser measuring system were performed. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and now presents itself in a very well-maintained visual condition. The generator and control system were cleaned and technically inspected. The generator's air conditioning unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent an extensive erosion test in accordance with the quality and testing specifications of OPS Ingersoll. The machine is ready for immediate use and is ideal for reliable production operations. Technical data: Ingersoll (OPS Ingersoll) Wire EDM Machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Bedpsyzw I Iefx Andoww Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Manual erosion with Powertec Handheld High-speed jump max. 18 m/min Generator power 60 Amps, EAGLE Powertec Travel ranges (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up plate changer Work tank (W x D x H): 770 x 670 x 440 mm Work table (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 16.10.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 132, empty load weight: 4,500 kg, FOR SALE: NEVA RE-MAX 500 CNC – Horizontal Thin-Cutting Bandsaw Year: 2009. Fully refurbished and serviced, ready for operation. Designed for cutting wood into slats. Bods Af Tp Ujpfx Andeww Power supply: 400 V / 50 Hz Machine weight: 4,600 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, OMN RV-500 Includes cooling system, dressing unit, and magnet. Bsdpfxez R Rpne Andoww

Condition: used, Year of construction: 1999, with CNC control, manufacturer: FIDIA, type: M 2, travel distances: X-axis: 4000 mm, Y-axis: 1000 mm, Z-axis: 1700 mm, with automatic tool changer with 10 tool positions, 2 pcs. clamping angles, manufacturer: MECOF, with 2nd exchangeable spindle HSK 50. Bwodps Af Nluofx Andew

Condition: excellent (used), Year of construction: 2018, The EKOMEX RBM 500 is a frozen block shredder designed for the mechanical breakdown of deep-frozen meat and hard, fibrous products in meat processing facilities. Manufactured in 2018, the machine features a 19 kW electric motor, a net weight of 1,600 kg, and a comprehensive safety interlock system. The shredded raw material is discharged directly into a meat trolley, making it ready for transfer to downstream equipment such as a grinder, bowl cutter, or mixer. How does the EKOMEX RBM 500 frozen block shredder work? The machine enables the shredding of deep-frozen meat blocks without prior thawing or manual cutting, thereby reducing preparation time and labor requirements. Its robust, stable construction (weighing 1,600 kg) is engineered for reliable heavy-duty operation, while direct discharge into a meat trolley streamlines production line logistics. Manufacturer: EKOMEX Machine type: Frozen block crusher Model: RBM 500 Machine number: 10015120003 Year of manufacture: 2018 CE number: 2018/RBM50003 Power supply: 400 V, 50 Hz, 3-phase Power: 19 kW Net weight: 1600 kg Noise level: approx. 80 dB Drive: geared motor driving the crushing shaft Working tool: crushing shaft with a set of 6 blades Feeding method: gravity feed via hopper, or via transfer/conveyor belt Product discharge: directly into a meat trolley Intended use: deep-frozen meat and hard, fibrous products Controls: panel with START, STOP, and RESET buttons; READY / NOT READY and ALARM (safety protection) indicator lights; EMERGENCY STOP Safety features: safety module, limit switch for removable guards, switch sensor, hopper safety grid, motor limit switch, main switch Bwodpsz S H Ubefx Andew Electrical system: Schneider Electric and Allen-Bradley components, starting system with time relay Materials: stainless steel and food-grade plastics Directives: 2006/42/EC (Machinery), 2014/35/EU (Low Voltage) Documentation: operating manual, electrical schematics, drawings, and parts list replacement parts, CE declaration of conformity

Year of construction: 2010, condition: excellent (used), Measuring column in a suitable transport case Height: 500 mm Diameter: 120 mm Bwsdpfofdzvasx Andjw Weight: 37 kg

Year of construction: 2022, condition: used, A CNC punching and nibbling machine with workpiece positioning is offered for sale. Equipped with a large worktable, workpiece clamping devices, foot switches and a hydraulic power unit. Inspection possible by arrangement. Bwsdpfx Ano Aga Imedsw

Year of construction: 2025, condition: like new (used), functionality: fully functional, Stainless Steel Mixing Tank 500l speed 23 rpm date of production 2024.12 used 3-4 times only Bwjdpfx Asyhnn Rondow

Condition: used, Year of construction: 2012, functionality: fully functional, overall weight: 2,500 kg, fuel type: electric, – Year of manufacture: 2012 – DTR, CE certified – Capacity: up to 20 m³/h TECHNICAL SPECIFICATIONS: – Inlet width: 500 mm – Inlet height of the feeder: 180 mm – Diameter of the knife shaft: 450 mm – Width of the knife shaft: 515 mm – Power of the main motor: 45 kW – Number of knives: 3 pcs – Knife length: 515 mm – Toothed pull shaft (bottom) – Power of the motor for the bottom toothed pull shaft: 2.2 kW – Toothed pull shaft (top) – Power of the motor for the top pull shaft: 2.2 kW – (Length / Width) of the belt feeder: 5000 x 500 mm – (Length / Width) of the receiving belt table: 3500 x 470 mm – Belt feed, forward/backward – Screen dimensions: 50 x 50 mm Transport dimensions: – Length: 700 cm Bsdpfxe Aa Iuks Andeww – Width: 240 cm – Height: 220 cm – Weight: ~2500 kg

Condition: used, Year of construction: 1975, Technical details: x-travel: 300 mm y-travel: 350 mm z-travel: 350 mm quill stroke vertical: 60 revolution per minute: 40 - 2000 U/min feed:: 12,5 - 500 / 18 step mm/min. tool taper: SK 40 Bwjdpfx Anou T Navedsw headstock adjustment: schwenkbar 90° rechts/links mm headstock adjustment: Y-Weg: 175 mm table surface area: 600 x 285 mm distance spindle nose and table: min./max.: 50 / 400 mm distance spindle center to column: min./max.: 170 7 345 mm total power requirement: 1,6 kW weight of the machine ca.: 0,8 t dimension machine xH: 1,4 x 1,1 x 1,7 m Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display Heidenhain Coolant system *

Condition: repair required (used), Year of construction: 1997, functionality: fully functional, power: 18 kW (24.47 HP), type of cooling: air, manufacturer: BECKER Type: rotary vane vacuum pump Model: DTLF 500 Year of construction: 1997 Bwedjvmhqrspfx Andow Order number: 1475879 NOTE: rotor blades need to be replaced. electric motor ELEKTRO ADDA Speed: 980 min-1 Rated power: 18.5 kW Input power: 500 m3/h Rated pressure: 800 mbar Rated vacuum: 0 mbar Attachment: FC200LT/6 Manufacturer: ELECTRO ADDA Type: MotoR Motor voltage [V]: 380/690v Current [A]: 38.5 Motor voltage [V]: 380-690 Rated speed [rpm]: 970/1170 Weight: ca350kg

Condition: used, Year of construction: 2017, Optimized miter saw Bwodpfxs Ad Ighe Andow Manufacturer: Salvador Type: SuperCut 500 Year of manufacture: 2017 Technical data - Saw blade diameter: 500 mm / 450 mm - Maximum feed rate: 200 m/min - Working height: 900 mm - Compressed air consumption: 400 Nl/min - Compressed air supply: 6 bar - Minimum connection power: 14 kW - Extraction speed: 45 m/s Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2018, machine/vehicle number: 0-250-82-8302, input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, controller manufacturer: HOMAG powerTouch / PC86, HOMAG DRILLTEQ V-500 / BHX 200/D – Year of manufacture: 2018 Vertical CNC machining center for drilling and milling operations. Equipped with dowel feeder and tool changer magazine, as shown in the inspection photos. Machine number: 0-250-82-8302 Control system: powerTouch / PC86, as shown in the screenshot Software: woodWOP 7.1, as shown in the screenshot from 22.10.2026 Meter readings according to the screenshot from 22.10.2026: Main usage: 2,885.92 h Total operation time: 6,789.99 h Photos of the meter readings and software are part of the image gallery. Electrical connection: 400 Y / 230 V, 3 phases, 50 Hz; neutral conductor required Maximum operating current: 29 A Fuse rating: 35 A Control voltage: 24 V Location: Basel area, Switzerland. Inspection possible until early December 2026 by appointment. Dismantling and removal will take place between December 8th and 18th, 2026, after coordinating a date. Bwodpfxj Agxfrs Andow Price on request. Detailed spindle configuration, working areas, software/license scope, and delivery scope will be determined after consultation. Windows version still to be confirmed. Subject to change and errors.