Used Daewoo Generator for sale (56)

Condition: new, connected load frequency 230 V battery 24V / 100Ah Brush diameter 510 mm turning speeds 175 U/min 0 Luft 24 L / s tank capacity 50 / 50 Liter weight 160 kg range L-W-H 1,1 x 0,52 x 1,0 mm Daewoo floor cleaning machine: Packed with battery and charger Iiedpfxsidabks Aabsh Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L

Condition: good (used), Year of construction: 2000, Machine come without tool holders and any additional equipement. Parts shown by hand not come. Technical details are shown on picture. Iiedpfx Aow Tc S Ujabjh

Condition: used, Torni CNC Doosan Puma TW2600 Ijdpsw Slx Usfx Aabsih 2016 (low hours) complete with robot it can be inspected in our warehouse in Gussago BS

Condition: used, Year of construction: 2004, operating hours: 10,080 h, Year of manufacture: 2004 Empty weight: 19.800 kg Iiodpfx Aaeubu Dvsboh Dimensions (LxBxH): 954 x 250 x 379 cm Damages: minor damage

Condition: used, functionality: limited functionality, Year of construction: 2005, operating hours: 3,080 h, load capacity: 4,500 kg, lifting height: 6,050 mm, free lift: 1,800 mm, fuel type: gas, mast type: triplex, construction height: 2,780 mm, fork length: 1,200 mm, empty load weight: 7,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,700 mm, LPG forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: poor Front tires type: Superelastic Front tires condition: 0 - 20% Rear tires type: Superelastic Rear tires condition: 0 - 20% Description: Engine defective Sideshift, 3rd valve, front work light, full free lift, dual tires, Iijdpfx Asvcf Rnsaboh

Condition: used, Year of construction: 2006, operating hours: 18,091 h, functionality: fully functional, machine/vehicle number: P60M0396, turning length: 1,600 mm, turning diameter: 900 mm, spindle motor power: 45,000 W, spindle speed (min.): 3 rpm, spindle speed (max.): 1,500 rpm, spindle bore: 181 mm, travel distance X-axis: 470 mm, travel distance Z-axis: 3,235 mm, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 16 m/min, feed length Z-axis: 1,650 mm, torque: 6,602 Nm, total height: 2,780 mm, total length: 5,760 mm, chuck outer diameter: 630 mm, bar diameter (max.): 164 mm, quill stroke: 150 mm, quill diameter: 160 mm, quill travel distance: 1,550 mm, swing diameter over cross slide: 800 mm, spindle nose: A1-15, overall weight: 16,100 kg, turning diameter over bed slide: 1,030 mm, Equipment: documentation/manual, The production machine will be available from October! Control: FANUC Control type: 21i-tb We are happy to answer your inquiries by phone. Iodpfx Aow Srx Ueabjih

Condition: new, Power 7,5 KW Receiver 500 L feed pressure 14 bar Iodpfju Imfzsx Aabjih liter capacity 995 l connected load frequency 400 V weight of the machine ca. 200 kg dimensions of the machine ca. 2,0 x 0,7 x ,125 m

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 575 mm, overall weight: 7,500 kg, SPECIFICATIONS Ijdpfx Aasw S E Ngjboih Longitudinal travel: 1020 mm Cross travel (Y): 510 mm Vertical travel (Z): 575 mm CNC type: SIEMENS Table length: 1200 mm Table width: 500 mm Max. permitted weight: 800 kg Number of tools: 30 Spindle taper: ISO 40 Max. spindle speed: 8000 rpm Spindle motor power: 15 kW Dimensions (L x W x H): 3275 × 2948 × 2996 mm Weight: 7500 kg Year of manufacture: 2001

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 1,420 h, load capacity: 3,000 kg, lifting height: 4,700 mm, mast type: triplex, Equipment: pallet forks, sideshift, Doosan forklift D30G Fuel: diesel Year of manufacture: 2019 Operating hours: 1420 Iisdpfew R U Nyex Aabsh Triplex mast and sideshift 4th valve

Year of construction: 2004, condition: ready for operation (used), General Data Machine weight 3500 Control Unit Brand FANUC Model 0i-T Main Drive Spindle speed range 6000 Spindle motor power 11.1 kW Number of axis 2 Additional Equipment Included in the offer: A set of tools. Iiodpowri Smjfx Aabsh This DAEWOO Puma 160 was manufactured in 2004. A robust horizontal turning machine featuring a Fanuc 0i-T control system, it supports a turning diameter up to 160 mm and a length up to 250 mm. With a spindle speed of up to 6000 rpm and a main motor power of 11.1 kW, it's ideal for precise operations. Machine weight ranges from 3,000 to 3,500 kg. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 1999, Weight: 43800kg Track width: 600 mm Engine: Daewoo Engine power: 221 kW Iodpfxjuf Haws Aabsih

Condition: new, Year of construction: 2022, Daewoo, DAFL50A, 2022, scrub machine, brand: Daewoo; type: Iisdpoh Nuy Ajfx Aabjh DAFL50A; year: 2022; NEW, NEVER USED, working width: 850 mm; electric: yes; hours on display: 0 hr; battery charger: yes; electric connection: 220 V; own weight: 160 kg; total dimension L: 1100 mm; total dimension W: 540 mm; total dimension H: 1020 mm; description: internal charger, unused, works on battery, batteries included; LOCATED IN POLAND

Condition: used, Year of construction: 2007, DOOSAN LYNX 220 LATHE Iedpfxsw Al Uxj Aaboih CNC FANUC Series Oi-TC Machine compliant with “CE” standards Max. swing over bed: 510 mm Max. swing over carriage: 290 mm Max. turning diameter: 320 mm Max. turning length: 305 mm Max. bar capacity: 52 mm Spindle nose: ASA 6” Spindle: max. rotation speed 50/5000 rpm Spindle motor power 11/15 kW Turret: 12 stations Tool dimensions (turning/boring) 25×25 / diameter 40 mm Machine weight: 2,900 kg Supplied with chip conveyor, tool presetting device, and a set of tooling.

Condition: ready for operation (used), Year of construction: 1995, Fanuc 0T Chuck diam. 210 12x turret Set of toolholders Tailstock with quill in cycle chip conveyor Presetting reset tools Aspirator condensation Turning diameter mm. 270 Turning length mm. 500 Bar passage mm. 51 Spindle motor power kW 11/15 Rapid X axis m / min 12 Fast Z axis m / min 16 4000 rpm Iiodow Ap Uiepfx Aabjh

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 1,335 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, Equipment: pallet forks, Doosan 2500 kg forklift diesel year of manufacture 2018 with 1,335 operating hours triplex mast and sideshift Isdpfx Aasw Hhkwsbjih 4th valve

Condition: used, CNC lathe Daewoo Lynx 200 B CNC Fanuc 21t 10 tool turret tailstock Iiedpfx Aajt Ip Uksbjh bar feeder The machine can be seen under power in our warehouse (M i m u)

Year of construction: 2001, condition: used, machine/vehicle number: AV5E0888, Vertical machining center with 3 axes DAEWOO MYNX 500 HEIDENHAIN 410 Accessories: Chip conveyor belt Remote electronic handwheel Iiedsgay Iuepfx Aabjh Automatic high-pressure cooling system pressure through the spindle line

Condition: good (used), Year of construction: 1998, Parts shown by hand not come. Technical data are shown on picture. Iisdpfxewb Aqnj Aabsh

Condition: good (used), Year of construction: 1999, Daewoo Lynx 200 CNC Lathe Model: Lynx 200 Year: 1999 Swing over Bed: 460mm Swing over Saddle: 350mm Max. Turning Length: 300mm Travels X/Z: 160 / 330mm Spindle Bore: 62mm dia. Spindle Speeds: 3000 RPM Machine with: 3-jaw chuck Iiodewt A Rlopfx Aabeh 10 station Turret Tailstock Swarf Conveyor

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 24 V, operation weight: 160 kg, LARGE QUANTITY AVAILABLE! Power: Battery: 24V / 100Ah Avarage power consumption: 1000W Power suction turbine: 500W Power brush drive: 500 W Max running time: 5 hours Cleaning brushes: Brush speed: 175 rpm Brush diameter: 510mm Vacuuming: Vacuum power, air volume (max): 24 L/s Vacuuming power, negative pressure (max): 120 kPA (mbar) Dimensions and weights: Theoretical surface cleaning Performance: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working range incline: 2% Fresh/waste water tank volume: 50/50 L Max. water temperature 60°C Ambient temperature 5-40°C Iedpfx Aasv Rvy Asbjih Net weight 160 kg Dimensions of battery compartment: 350 x 350 mm Values determined as per EN60335-2-72: Total oscillation value: < 2.5 m/s² Uncertainty K: 0.2 m/s² Sound pressure level Lpa: 66 dB(A) Uncertainty Kpa: 2 dB(A) Sound power level Lwa +: 81 dB(A)

Condition: good (used), Year of construction: 2000, Daewoo Puma 230, year of manufacture 2000, Fanuc 18 iT control, turning length 548 mm, turning diameter 350 mm, Isdpswx I Efjfx Aaboih 10-position turret, tailed tailstock, three-jaw chuck Ø 254 mm, tool measuring arm, swarf conveyor, coolant system, main spindle newly mounted, flat guides, accessories,

Condition: good (used), Year of construction: 2003, Daewoo Heavy Puma 600 CNC Turning Centre with Fanuc Series 18i-T CNC Control, Chuck size 610mm, X axis 900mm, Z axis 1575mm, Spindle speed 1400rpm, 12 Station Turret and programmable Tailstock, Mills Swarf and Coolant Conveyor System, Machine weight 16100 kgs, fitted with Tool Presetter. S/No. PM600042 (2003) Iijdpfx Aewvbuboabsh

Year of construction: 2000, condition: excellent (used), machine/vehicle number: AV5C0171, Vertical machining center with 3 axes with rotopallet DAEWOO ACE VC500 FANUC 18-M Accessories: Chip conveyor belt High pressure cooling system 10 bar Iiodsga Edxepfx Aabsh through the spindle line No. 2 rotary tables Comand TGV 200

Condition: good (used), Year of construction: 2001, DAEWOO MYNX 500 MACHINING CENTER FANUC SERIES 21 CNC – M TABLE MM. 1200 mm x 500 mm TRAVELS: X. MM.1020 Z. MM.650 Y. MM.510 SPINDLE SPEED 8000 RPM INTERNAL SPINDLE COOLANT / HIGH PRESSURE SPINDLE MOTOR POWER 11/15KW SPINDLE CONNECTION ISO 40 Iodsvkv Rhopfx Aabeih SPINDLE-TABLE MM.200-775 MACHINE WEIGHT KG.7,500 RANDOM TOOL MAGAZINE 30 POS. CHIP CONVEYOR COMPLETE WITH ALL DOCUMENTATION MACHINE IN EXCELLENT CONDITION YEAR: 2001

Condition: used, Year of construction: 2002, functionality: fully functional, turning diameter: 1,600 mm, spindle motor power: 45 W, spindle speed (max.): 1,500 rpm, travel distance X-axis: 1,200 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, Daewoo Doosan PUMA V-1200M CNC vertical lathe, year 2002, equipped with FANUC Series 18-T control, designed for machining large and heavy workpieces, ideal for heavy-duty and industrial sector applications. Main technical specifications: Maximum swing and turning diameter: Ø 1,600 mm Maximum turning height: 1,200 mm Maximum workpiece weight: 6,000 kg Chuck diameter: Ø 1,200 mm RAM axes: X (horizontal): 1,200 mm Z (vertical): 900 mm C axis: 360° rotation, minimum positioning increment 0.001° Main spindle: Speed: 2 ÷ 320 rpm (2 ranges) Power: 37/45 kW RAM driven spindle: Taper ISO-50 Speed: 15 ÷ 1,500 rpm RAM section: 240 x 240 mm Tool turret: 16 stations, with BT-50 type tools Max. tool diameter: Ø 400 mm Max. tool length: 450 mm Max. tool weight: 50 kg Iiedpowt S Rhofx Aaboh Maximum tool weight in magazine: 600 kg Feeds: Rapid traverse X/Z axes: 10,000 mm/min Working feeds X/Z axes: 3,000 mm/min Included accessories: Chip conveyor Coolant tank with pumps Spindle line air conditioner Various fixed and driven tool holders Manuals, electrical diagrams, CE declaration Solid and high-performance machine for vertical machining of large workpieces with high precision.