Used Dare Force for sale (6,138)

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, injection pressure: 2,389 bar, ejector stroke: 135 mm, opening stroke: 1,825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Mounting platen (H x V): 1,520 x 1,470 mm Clear distance (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Dcodpoycqc Tofx Afpsc Minimum mold installation height: 675 mm Daylight: 1,825 mm Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cm³ Shot weight (PS): 998 g Injection flow rate: 393 cm³/s Screw speed: 218 rpm Plasticizing rate: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Dimensions & Weight Required floor space approx.: 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Electrohydraulic Equipment Rated power pump motor: 75 kW Installed heating capacity: 36 kW Temperature control zones cylinder heating: 7 EQUIPMENT Oscillating elements 1 x air valve 8-fold pneumatic cascade control Accumulators 2 x hydraulic core pulls at BWAP 2 x hydraulic core pulls at FWAP Robot interface according to EUROMAP 67

Condition: not inspected (used), Year of construction: 2018, operating hours: 3,731 h, functionality: unexamined, machine/vehicle number: DS901DA010011, clamping force: 2,750 kN, screw diameter: 50 mm, injection pressure: 1,530 bar, opening stroke: 610 mm, controller model: ENDURA touch, The machine was operational until 2022 and was then professionally dismantled. Since that time, the machine has not been used again. TECHNICAL DETAILS Dcjdpfsyf Hfpsx Afpec Clamping force: 2,750 kN Platen spacing: 1,560 mm Tie bar distance: 660 x 660 mm Opening stroke: 610 mm Screw diameter: 50 mm Injection pressure: 1,530 bar Max. injection flow rate: 523–1,530 cm³/s MACHINE DETAILS Control system: ENDURA touch Cabin protection: Fully enclosed cabin Tie bar arrangement: horizontal Oil tank: 900 l Operating voltage: 400 V / 50 Hz Power consumption: 219 A Footprint: 9,000 x 4,200 x 2,900 mm Operating hours: 3,731 h AUTOMATION EQUIPMENT Fully enclosed cabin with safety door Kuka 6-axis robot KR 20 R 1810 with Gimatec QC 90-A gripper adapter KUKA 6-axis robot KR 6 R900 with QC 50-A gripper adapter Handheld control panel Marking laser with scanner and extraction unit Multi-level conveyor system with lift unit Base frame and transfer station Base frame with automatic screw feeder 4-cavity removal gripper 6827137 1+1 handling gripper 6827137 4-cavity removal gripper 7936450 4-cavity removal gripper 7936449 2+2 handling gripper 7936449 Note: The dosing unit shown is not included in the scope of delivery and sale. One of the machine's hydraulic hoses is leaking (see pictures).

Condition: new, Year of construction: 2026, functionality: fully functional, power: 55 kW (74.78 HP), ### Introduction to Jaw Crushers A jaw crusher is a type of primary crusher used in mining and ore processing plants. It works by using compressive force to break down large rocks into smaller, more manageable pieces. The machine consists of a fixed jaw and a movable jaw, which together create a V-shaped cavity called the crushing chamber. The movable jaw exerts force on the rock by forcing it against the stationary plate, causing it to break. Key Components: - Fixed Jaw Plate: Mounted in a fixed position. - Movable Jaw Plate: Mounted on a pitman that moves in a reciprocating motion. - Flywheel: Provides the necessary inertia for the crushing action. - Toggle Plates: Serve as a safety mechanism, ensuring that the jaw crusher operates efficiently and prevents damage. Dsdpfoq Nf Tvsx Afpecc ### Working Principle The working principle of a jaw crusher is based on the reciprocating movement of the movable jaw against the fixed jaw: 1. Feeding: Large rocks are fed into the top of the crusher. 2. Crushing: As the movable jaw moves back and forth, it crushes the material against the fixed jaw. 3. Output: Crushed material is discharged from the bottom of the crushing chamber. ### Applications of Jaw Crushers Jaw crushers are versatile and can be used in a variety of industries and applications, including: 1. Mining and Mineral Processing: - Primary crushing of mined ore (gold, copper, iron, etc.). - Size reduction of rocks to facilitate further processing (e.g., milling). 2. Construction and Demolition: - Crushing of concrete, bricks, and other construction materials. - Recycling of building materials to create aggregate for new construction. 3. Aggregates Production: - Crushing of raw materials to produce aggregates for concrete and asphalt. - Production of road base and railway ballast. 4. Industrial Applications: - Crushing materials in chemical processing plants. - Size reduction of materials for production processes in various industries. 5. Environmental Management: - Processing of materials for landfill cover. - Recycling operations to reduce waste and promote sustainable practices. ### Advantages of Jaw Crushers - High Crushing Ratio: Capable of producing a range of material sizes with a single pass. - Durability and Reliability: Built to withstand heavy-duty use and harsh conditions. - Simple Structure: Easy to maintain and repair, with fewer components compared to other types of crushers. - Versatility: Suitable for various types of materials and a wide range of applications. - Energy Efficiency: Efficiently uses energy, making it cost-effective for operations. ### Examples of Use Cases - Mining Operations: Jaw crushers are used as primary crushers in mine sites to crush large rocks before being processed further in the milling process. - Construction Sites: Used to break down concrete and other building materials for recycling and re-use. - Aggregate Production: Integral in producing the base materials for construction and infrastructure projects. - Demolition Projects: Efficiently crushes and recycles materials from demolished structures. By understanding the introduction and applications of jaw crushers, businesses can make informed decisions about integrating this machinery into their operations for efficient and effective material processing.

Condition: used, power: 160 kW (217.54 HP), Field of application: Mining Experience the pinnacle of versatile crushing with Polygonmach Machinery’s Tertiary Impact Crusher (HSI). Engineered to deliver exceptional performance in a wide range of applications, this advanced crusher takes your aggregate production to new heights. Dcjdpoygqw Sefx Afpec The Tertiary Impact Crusher (HSI) is specifically designed for fine crushing and shaping of hard and medium-hard materials. It stands as the ultimate solution for producing high-quality aggregates with precise particle shape and consistent gradation. The Tertiary Impact Crusher (HSI) utilizes a high-speed rotating rotor that generates a powerful impact force. This force efficiently reduces the material size, resulting in finely crushed particles ideal for a variety of applications. When it comes to stone types, the Tertiary Impact Crusher (HSI) proves its versatility. It can effectively handle various types of stones, including limestone, granite, basalt, and more. The crusher's robust design and specialized components ensure optimal performance, regardless of the stone type, making it suitable for a wide range of aggregate production needs. Let's delve into the key components of the Tertiary Impact Crusher: Rotor: The high-speed rotor delivers powerful impacts to the incoming material, ensuring efficient reduction and shaping. Blow Bars: Robust blow bars withstand high impact forces and ensure efficient crushing of the stones. Adjustable Curtains: The adjustable curtains regulate the product size by controlling the gap between the rotor and curtains, allowing precise customization. Feed Hopper: The feed hopper efficiently directs the material into the crushing chamber, ensuring a steady and continuous flow. Technology: impact Mobility: stationary Other characteristics: fine, tertiary, stone, limostone Capacity: Max.: 350 t/h(214 lb/s)Min.: 80 t/h(49 lb/s) Motor power: Max.: 500 kW(679.81 hp)Min.: 160 kW(217.54 hp) Opening height: 1,100 mm, 1,300 mm, 1,400 mm(43.3 in, 51.2 in, 55.1 in) Opening lenght: Max.: 1,800 mm(70.9 in)Min.: 500 mm(19.7 in) net weight: Max.: 33,000 kg(72,752.55 lb)Min.: 10,000 kg(22,046.23 lb)

Condition: used, Year of construction: 2006, Brake force 300 tons Working length 6100 mm Distance between uprights 4550 mm Throat depth 400 mm Punch stroke 320 mm Table width 220 mm Fast speed (0 – 100) mm/sec Woriking speed (0 - 7) mm/sec Upstroke speed (0 – 90) mm/sec Hydraulic pressure (max) 255 bar Main electric motor 18,5 KW Dcedpswhcycefx Afpjc Length 7500 mm Width 2900 mm Height 3700 mm Weight (aproxim.) 32000 Κgr

Condition: new, power: 309 kW (420.12 HP), fuel type: diesel, axle configuration: 6x6, wheelbase: 5,950 mm, fuel: diesel, color: white, emission class: euro3, Year of construction: 2024, Equipment: air conditioning, = Additional options and accessories = - Spare wheel - Sun visor = Remarks = Model description: BARCELONA ASTRA CHASSIS 6×6 (HD9 66.42) MY24 Chassis Cab Code Diesel Type: HD9 66.42 GCW: 104 Tons Horse Power: 420HP Rear Axle Rate: 5009 Shipping Dimension: 8275 x 2550 x 3500 mm Gear Box Type: Manual Gearbox ZF, 16 forward and 2 reverse gears Rear Overhang: 1200 mm Drive Hand: LH Drive Rear Differential Lock: Available Reinforced Air Filter double stage with air intake on the cab roof Heated Fuel Filter Standard Parabolic Suspensions (Leaf-Spring type) with stabilizer bar on the 1st axle Drum Brakes on all axles with ABS and EBL (Electronic Brake force Limitation) Systems Standard Batteries Qty2 (180Ah each) with manual cut-off Standard Alternator 90Ah x 28V (2520 W) Air Suspended Driver Seat (adjustable) and Standard Passenger Seat (adjustable) Electric Doors' Windows with tinted glass Standard Manual Rear View Mirrors CE compliant Radio pre-arrangement Front Lights protection grids Dodpfx Afjw Duagepjcc Front Manouvering Hook (at center of front bumper) Standard Tool Kit and Hydraulic Jack Reverse Gear Buzzer Anti-Roll Bar On 2Nd Rear Axle Anti-Roll Bar On 3Rd Rear Axle Reinforced Rear Suspensions Front Reinforcing Plate For Front Drive Axle Auxiliary Air Intakes On Left Side Close To Batteries Provision For PTO Control Reinforced Front Parabolic Suspension 9 Tons Fuel Pre-Filter Front Mirror English Plate Standard Front Hood (Same Color Of Cab With Logo In Black) Rear Lights Protection Grids Inflation Kit For Tyres: Hose + Air Gun + Manomenter Wheel Chocks (Qty 2) = More information = Transmission: ZF GVW: 40.000 kg Engine type: Cursor 13

Condition: good (used), functionality: fully functional, The SIRMAN IS IDRA is a compact, robust hydraulic piston stuffer designed for high-pressure filling of small batches. It is an ideal machine for butcher shops, specialty food producers, or as a reliable backup unit where space is limited and high filling pressure is required. Performance & Specifications High Pressure: Delivers substantial Pressure of 120 bars, making it highly effective for dense, firm, or cold product masses that require a strong pushing force. Compact Capacity: Features a manageable Capacity of 25 Liters, perfect for small-to-medium batch processing and frequent product changes. Dcodpfexv Svgsx Afpjc Durable Construction: Built with Complete stainless steel material, ensuring longevity, hygiene, and resistance to corrosion. Safety Rating: Has an IP 67 waterproof rating, indicating high protection against dust and water, which simplifies the washdown process. Operational Benefits Space-Saving Design: Its compact size and Weight (Net) of 91 kg make it portable (it has casters) and easy to integrate into small production areas. Piston Stroke Control: Features a Piston Stroke of 380 mm, providing efficient filling cycles. Reliable Power: Operates using a standard 220 V electrical connection with a Power of 560 W / 0.75 HP. Excellent Condition: This stuffer is ready for production, offering consistent, high-pressure filling.

Condition: refurbished (used), functionality: fully functional, The K+G Wetter SM 65 Bowl Cutter with Vacuum is a premium industrial machine designed for the highest quality fine-emulsifying and chopping of meat products. The addition of the vacuum system elevates product quality, making it ideal for high-end sausages, emulsions, and specialty products. Vacuum Advantage & Quality Control Superior Product Quality: The integrated Vacuum System removes air from the product during cutting and mixing. This prevents oxidation, enhances color stability, improves product binding, and significantly reduces air pockets, resulting in a denser, higher-quality final emulsion. High Knife Speed: Features a Knife shaft continuously variable from 50 to 5000 rpm, providing extreme precision to achieve the exact desired texture and fineness. Temperature Monitoring: Includes a precise Temperature monitoring system, giving the operator vital control to prevent product quality degradation. Efficient Mixing: The Mixing cycle return value of 50–500 U/min ensures thorough and gentle incorporation of ingredients, even under vacuum. Power & Operational Benefits Consistent Batch Quality: The variable speeds and vacuum control ensure highly reproducible, uniform results for every 65-liter batch. Heavy-Duty Power: Features substantial Installed Power of 24 kW, providing the necessary force to cut and emulsify tough, chilled, or frozen products efficiently. Safety and Noise Reduction: Includes a Noise protection cover and the knife shaft for a safer, quieter working environment. Hygienic Design: Constructed from stainless steel with a focus on accessibility for maintenance and easy, thorough cleaning, adhering to rigorous industry hygiene standards. Dcjdpfjxv Sk Dex Afpsc

Condition: refurbished (used), functionality: fully functional, The K+G Wetter SM 65 Bowl Cutter is a premium, compact industrial cutter designed for precise and rapid fine-emulsifying, mixing, and chopping of meat products. Its 65-liter capacity and powerful motor make it ideal for high-quality small-to-mid-sized batches. Precision & Cutting Power High Knife Speed: Features a Knife shaft continuously variable from 50 to 5000 rpm, allowing the operator extreme precision to achieve any desired consistency, from coarse chopping to fine emulsification. Temperature Monitoring: Includes a sophisticated Temperature monitoring system, giving the operator crucial control over product quality and preventing denaturing during the cutting process. Efficient Mixing: The Mixing cycle return value of 50–500 U/min ensures thorough and gentle incorporation of ingredients, seasonings, and liquids. Robust Head: Equipped with a high-performance 6-knife head, capable of handling demanding cutting loads. Operational Benefits Consistent Batch Quality: The variable speeds and precise controls ensure highly reproducible results for every batch. Heavy-Duty Power: Features substantial Installed Power of 24 kW, providing the necessary force to cut and emulsify tough, chilled, or frozen products efficiently. Safety and Noise Reduction: Included parts consist of a Noise protection cover and the knife shaft, prioritizing operator safety and a quieter working environment. Dodpfx Afsxv Skqjpocc Hygienic Design: Constructed from stainless steel with a focus on accessibility for maintenance and easy, thorough cleaning, adhering to rigorous industry hygiene standards. Intuitive Control: Features a modern, accessible control panel for easy programming and process monitoring.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, cutting width (max.): 3,200 mm, cutting length (max.): 3,200 mm, stack height: 1,200 mm, type of input current: three-phase, front table length: 3,200 mm, total width: 3,200 mm, Equipment: safety light barrier, ESKO - Kongsberg C64 with very low hours fully atomated - pallet to pallet board feeder - I-BF 60M board stacker - I-MS 60 M i-camera kit, underside cammera conveyer (new matt for buyer installation - currently with origynal one) Dsdpfxsxy Nzne Afpscc almost all optional tools: Hi power milling unit (HPMU-C) Dual HDU-C package (crease wheels - small+big, perforation, V-cut) Variangle kit VibraCut-C tool Corruspeed Knife (for cardboards) Hi-Force knife - Cpackage inc.blade adapter RM knife tool - C package Multizone pannel TB - Industrial stationary Vacum cleaner sound insulating

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 2050 mm Press force: 100 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 1700 mm Forward speed: 130 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 120 liters Main motor power: 7.5 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 800 mm Table width (G): 110 mm Length (L): 2500 mm Height (H): 2000 mm Width (W): 1500 mm Weight: approx. 5300 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Dsdsgu Nz Sjpfx Afpocc Painting: RAL 7035, RAL 5015 Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Documentation in German or English CE conformity

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 2550 mm Press force: 135 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2100 mm Forward speed: 120 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 150 liters Main motor power: 7.5 kW Dedjgu Nzrepfx Afpscc Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 850 mm Table width (G): 110 mm Length (L): 2950 mm Height (H): 2200 mm Width (W): 1500 mm Weight: approx. 6000 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Painting: RAL 7035, RAL 5015 Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Documentation in German or English CE conformity

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2550 mm Forward speed: 130 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 180 liters Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Dcodpfx Afogu N Alepjc Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Painting: RAL 7035, RAL 5015 Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Documentation in German or English CE conformity

Condition: good (used), EBA 721-06 LT Paper Cutting Guillotine The machine has been serviced and is ready for operation. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine, with a 721 mm knife length, is equipped with infrared safety curtains, a hydraulic pressure device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable timer and electronic saddle position readout with an accuracy of 1/10 mm. The machine’s main work table is made of stainless steel with a blower. Technical data: Cutting length 721 mm Infeed height 78-80 mm Infeed depth 720 mm Power supply 400 V Weight 620 kg Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator, Air table (on front and rear tables), Pedal for pre-marking the cutting line using the clamp or optical cutting indicator, Solid, adjustable steel knife carrier, Blade made of high-quality HSS steel. Safety features include: „Safety curtain” – a photocell in the front table, Transparent safety cover on the rear table, Safe drive – IDEAL patent, Dcjdpfx Afoyg D U Dspec Electronically controlled two-handed cutting start, Automatic knife return from any position, Main switch equipped with a key switch. Key-operated Knife replacement possible with the blade permanently covered The set includes: a safety knife change tool, operating tools, a paper tapping tool, and a spare knife.

Condition: good (used), Polar Mohr N78 Plus Paper Cutting Guillotine Machine after inspection, ready to work. Like new. Year of production 2016. Technical data: Cutting width 780mm Stack height 120mm 21.5″ LCD display 400V power supply Weight 1400kg Dcsdpfx Afjyg D Uqspoc Enlarged side tables. Chrome table surface Table backlight and optical cutting line Smoothly adjustable pressure force Additional covers for the rear table. Spare knife, sticks, tapping block, operating tools.

Condition: good (used), FKS PrintBind KB 2000S Perfect Binder 100% functional and ready to use. Manufactured by FKS Hamburg, Germany. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. Dedpeyg D Tyefx Afpocc The machine has a convenient base and a built-in compressor. Technical specifications: Maximum format: 320 x 310 mm Spine thickness: 60 mm Capacity: approx. 320 books/h Weight: 186 kg 230V power supply Material detection sensors Automatic cover detection and automatic cover clamp Spine milling Simple operation via LCD panel Adjustable cover clamping force Infinitely variable glue thickness adjustment Includes user manual and compressor.

Condition: used, Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Djdpfex H R U Ssx Afpecc Model: HL 4010 Li Year of manufacture: 2012 Pressing force: 40 t

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine Djdpfsukn S Hex Afpjcc Overall dimensions :3100 x 1950 x 2600 mm Weight: 5500 kg Manufacturer: Engel Type: ES 330/85 Year of manufacture: 1997 Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Condition: excellent (used), Year of construction: 2011, clamping force: 5,000 kN, Clamping force: 500 t Screw diameter: 65 mm Dsdpfx Aoyhp Avjfpscc Shot weight: 1144 g Distance between tie bars V: 800 mm Distance between tie bars H: 1000 mm Shot volume: 1244 cm3 Type: Multicomponent Drive: Hydraulic

Condition: like new (used), Year of construction: 2018, clamping force: 2,300 kN, Equipment: documentation/manual, Toshiba EC230SXII – 230 ton Injection unit i8 – Screw 50 mm CLAMPING UNIT Clamping force: 2250 kN (230 t) Tie bar spacing (H×V): 610 × 560 mm Platen size (H×V): 880 × 830 mm Moving platen stroke: 550 mm Max daylight: 1230 mm Mold height min–max: 250–680 mm Ejector force: 49 kN (5.0 t) Ejector stroke: 130 mm INJECTION UNIT – 50 mm Screw diameter: 50 mm Shot volume: 392 cm³ Shot weight PS: 361 g Shot weight PE: 286 g Max injection pressure: 200 MPa Max holding pressure: 200 MPa INJECTION SPEED / RATE STD speed: 250 mm/s STD rate: 490 cm³/s HIGH DUTY speed: 160 mm/s HIGH DUTY rate: 314 cm³/s HIGH SPEED speed: 350 mm/s HIGH SPEED rate: 687 cm³/s PLASTICIZING Plasticizing capacity PS: 160 kg/h Screw speed: 255 rpm Screw torque: 1421 Nm Nozzle contact force: 29.4 kN (3.0 t) ELECTRICAL Main breaker STD: 125 A Dcodpfxjyhpi As Afpjc Main breaker HIGH DUTY: 125 A Main breaker HIGH SPEED: 175 A Transformer: 75 kVA Heater capacity: 15.2–16 kW DIMENSIONS & WEIGHT Length: 6.4 m Width: 1.7 m Height: 2.0 m Weight: 9.9 t

Condition: excellent (used), Manufacturer: LVD Model: PPEBturbo 220 Type: PPEB-EFL 220/30 Year of manufacture: 2006 Serial number: 30494 Technical specifications: Max. press force: 2,200 kN (220 tons) Working length: 3,050 mm Clearance between uprights: 2,600 mm Max. ram stroke: 450 mm Max. table–ram distance: 685 mm Throat depth: 450 mm X-axis stroke: 600 mm Table width: 120 mm Speeds: Approach speed: 120 mm/s Working speed: 21 mm/s Return speed: 200 mm/s Drive and hydraulics: Motor power: 37 kW Power supply: 400 V Pump: variable Hydraulics: Bosch / Rexroth SYDFE1 Oil tank: 350 l Other data: Control: LVD Cadman CNC Noise level: 80 dB(A) Machine weight: approx. 14,500 kg Dedpsyhdyisfx Afpocc

Condition: like new (used), Type: PX 30530 Serial number: 12932 Year of manufacture: 2021 Bending length: 3050 mm Pressing force: 320 t Maximum pressure: 280 bar Motor power: 18.5 kW Dcjdpeyhdrrjfx Afpoc Oil tank capacity: 400 l Weight: 14,700 kg

Condition: ready for operation (used), Year of construction: 2015, Manufacturer: HSM Dodpeyhbxcjfx Afpecc Model: HL 4010 Li Year of manufacture: 2015 Pressing force: 40 t

Condition: repair required (used), Year of construction: 1990, Technical details Clamping unit Djdpfxjyhbvbs Afpocc Clamping force: 850 kN Max. mould opening force: 37 kN Size of mould platens (W x H): 490 mm x 490 mm Distance between tie bars (W x H): 320 mm x 320 mm Mould opening stroke: 375 mm Minimum mould height: 250 mm Max daylight: 625 mm Screw diameter: 45 mm Shot weight, PS: 214 g Injection rate: 180 ccm/s Injection stroke: 150 mm Screw speed: 52 m/sec Nominal capacity of pump motor: 15 kW Installed heating capacity: 5.5 kW Additional information The machine will not start due to a program error! Currently not operational!!

Condition: excellent (used), Year of construction: 2007, Arburg 320C 500-100 (2007) Clamping force: 50 t Screw diameter: 25 mm Opening stroke 350 mm Mould height : 200 mm Distance between tie bars V: 320 mm Distance between tie bars H: 320 mm Mould clamping platens: 446x446 Injection pressure : 2240 Dedpfxsu Dmgqs Afpocc Injection flow : 124 cm3 Ejector stroke : 125 mm Ejector force: 30 kN Net weight : 2080 kg Type: Horizontal Drive: Hydraulic Selogica CF card reader machine tested English language