Used Deckel Fp 3 A for sale (683)

Year of construction: 1990, condition: good (used), Various collet chucks and holders, approximately 300 pieces. For DECKEL milling machines FP1 - FP2 - FP3 - FP4 Fodpfx Ajhvz Iiefpepi Individual sales upon request.

Condition: used, power capacity / kW volt / V ampere / A Fodpfxjy S Eb Rj Afpspi DECKEL MONITOR Bildschirm DIALOG FP2 / FP3

Condition: good (used), Year of construction: 1981, Deckel FP3L Active with 3-axis Heidenhain Active digital display, rigid table, vertical milling head, SK 40 S20x2 spindle mount. Good working condition. Ready for live demonstration upon request. Fjdpfx Afowg S Nkepspi

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Active Digital Readout (Heidenhain) and Infinitely Variable Feed, Original Excellent Condition Technical Data: >> Year of manufacture: 1982 Machine no. 2201-5527 >> Swivel-tilt-rotary table >> Speed range: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in all 3 axes Fpodpfjy Eqkzsx Afpoi >> Drive power: 2.0 / 4.0 kW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be displaced 200 mm on spindle carrier >> Vertical and horizontal quill, SK40, extendable >> Pull stud system: M16 >> Weight: approx. 1,500 kg Accessories and Equipment: >> 3-axis active digital readout Heidenhain TNC113 >> Coolant system >> Central lubrication About the machine: Offered here is a universal milling machine Deckel FP3 in very good original condition. The machine shows minimal backlash and all spindles move smoothly. On this newer FP3 model, the feed is infinitely variable in all three axes, and each axis features rapid traverse. A significant advantage is the active 3-axis digital readout. With the Heidenhain positioning control, you can enter dimensions and the machine will automatically move to defined positions. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our site. The machine is available immediately.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Active Digital Readout TNC 113 by Heidenhain and Infinitely Variable Feed—Excellent Condition Technical Data: >> Year of manufacture: 1983 Machine no. 2201-5919 >> Fixed angle table (reconditioned) >> Speed range: 25 – 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 2.0 / 4.0 kW >> Spindle brake >> Travel (X/Y/Z): 500 / 300 / 400 mm >> Vertical milling head movable on spindle head by 200mm >> Vertical and horizontal quill—SK40 extensible >> Pull-in system S20 x 2 >> Weight approx. 1500 kg Equipment and Accessories: >> 3-axis active digital readout Heidenhain TNC113 >> Coolant system >> Central electric lubrication About the machine: Fpsdpfx Afey D Tl Ispji Offered here is a Universal Milling Machine Deckel FP3 in very good condition. The machine has very little backlash and all spindles move smoothly. On this newer FP3 model, the feed is infinitely adjustable in all three axes, and the machine also features rapid traverse for each axis. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input dimensions that the machine will automatically position to. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain DRO makes operation both easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site. The machine is available immediately.

Condition: used, Year of construction: 1981, weight of the machine ca. 1.700 kg dimensions 2000 x 1000 x 1950 mm Fpsdpfx Aoyv Nitjfpei

Condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: 2832-1076, feed length X-axis: 560 mm, feed length Y-axis: 500 mm, feed length Z-axis: 390 mm, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 390 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, total height: 2,265 mm, total width: 2,410 mm, total length: 2,710 mm, table width: 530 mm, table length: 900 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, table load: 800 kg, overall weight: 2,890 kg, input voltage: 380 V, workpiece weight (max.): 800 kg, input current: 44 A, input frequency: 50 Hz, number of spindles: 2, number of slots in tool magazine: 20, Equipment: documentation/manual, Tool holder: SK 40, Control: DECKEL DIALOG 11, with documentation. According to our research, the NPL01 board of the tool changer is defective. Therefore, the automatic tool changer does not work. Otherwise, the machine is fully functional. Operating manual (Machine manual 1), diagnostic manual for the 'DIALOG11' control, machine manual 2 (accessories), programming manuals 1-3, and electrical wiring diagrams are available. Fsdpfx Afewqdtpjpjpi The machine can be viewed under power. The machine is bought as is. No warranty.

Condition: used, Year of construction: 1987, - Lid Contour 3 CNC control - Sliding vertical milling head with extendable spindle - counter bearing for long milling arbors - Hydraulic tool clamp - Automatic speed gearbox - Automatic clamping in X/Y/Z axes - Automatic central lubrication - coolant device - direct path measurement - Collision protection clutch in Z/Y axes - year of construction 1987 Technical data Working range: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Vertical quill stroke: 80 mm - Vertical milling head can be moved on headstock: 150 mm Main drive: - Motor: pole-changing three-phase AC brake motor and manual gearbox with clockwise/anticlockwise rotation - Power: 3.7 / 4.4 kW - 18 working spindle speeds: 50 - 2500 rpm - Step change: 1.25 Fpjdpfsu Awlzjx Afpsi - Tool holder: SK40 (M16) - Tool clamp: hydraulic Feed drive: - X-axis: 1 DC motor - Y- and Z-axis: 1 DC motor - All axes: ball screws - Feed speed programmable: 10 - 1000 mm/min - Rapid traverse X-/Y-/Z-axis: 2000 mm/min Universal table: - Number of T-slots: 7 - T-slot width: 14/H7 mm - T-slot spacing: 63 mm - Center bore Ø/depth: 63H6 / 8 - Distance from table center to screw-on surface: 260 mm - Max. Passage height (vertical milling spindle/table surface): 490 mm - Permissible load: 300 kg - Weight: 230 kg - Rotation range in horizontal position (axis C): 360 ° - Tilt range (axis A): +450 / -150 ° - Pivoting range (axis B): ± 450 ° - Measuring range with direct digital display: Resolution 360000 x 0.001 ° - Reduction ratios: 60:1 / 120:1 / 240:1 Installation: - Space requirement with safety area: approx. 2.3 x 2.5 m - Operating voltage: 400 V / 50 Hz - Total connected load: 7.5 kW / 9.5 kVA - Machine weight: approx. 1830 kg - Floor load: 3000 kg/m²

Condition: like new (used), functionality: fully functional, Universal milling machine Deckel FP3 with new 3-axis FPS active digital display Heidenhain General overhaul by FPS 2015 Mint condition Technical data: >> Year of construction 1980 Machine no. 2201-5045 >> Rigid angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> rapid traverse in 3 axes Fsdpfou Dm E Hjx Afpopi >> Drive power .:2,0 / 4,0 KW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3 axes active digital display Heidenhain (latest version) >> Coolant device >> Central lubrication To the machine : On offer is a Deckel FP3 universal milling machine in mint condition. The FP3 was overhauled by FPS in 2015 and has only been used a little since then. The machine has little crank play and all spindles can be moved easily. On this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power. The machine is available immediately.

Condition: good (used), Year of construction: 1980, Deckel FP3 tool milling machine with 3-axis Heidenhain digital readout, fixed table, SK 40 spindle taper, accessories: various collets and milling arbors, counterholder. Good operational condition. Can be demonstrated under power by appointment. Fodjxdr Uxopfx Afpspi

Condition: used, Univ. universal milling machine with active digital display, DECKEL type FP 1 Universal milling machine Machine No. 2102 - 6130 Year of manufacture 1991 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 210 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate 5 to 500 mm/min Rapid traverse 1200 mm/min Fpedpfx Ajzinzxefpji Motor power 1.6 and 2 kW, pole-changing Mains connection 380 Volt, 50 Hz - Active digital display for 3 axes, HEIDENHAIN type TNC 113 - Stepless feed in the X, Y and Z axes - Spindle speed controlled via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable 100 mm - Fixed tilting table 600 x 210 mm - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Protective enclosure with hinged doors around the machine table - Original chip tray for mounting on the machine base - Machine lamp - Counter holder with counter bearing - Electrical diagram available Space requirement L x W x H 1600 x 1250 x 1750 mm Weight 900 kg Good condition

Condition: used, Univ. universal milling machine with active digital display, DECKEL Type FP 1 Machine No. 2101 - 7088, Year of manufacture 1993 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.6 and 2 kW, pole-changing Power connection 380 Volt, 50 Hz - Active control and digital display for 3 axes, HEIDENHAIN Type TNC 123 - Stepless feed rate via servo motor in the X, Y, and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable by 100 mm - Swivel, rotary, and tilting angle table DECKEL, Type 2114 Fpjdsziny Ispfx Afpsi - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Hinged protective shield with safety switch - Original chip tray for mounting on the machine base - Electrical diagram available Space requirement L x W x H 1600 x 1200 x 1770 mm Weight 900 kg Good condition

Condition: good (used), Year of construction: 1982, x-travel 300 mm y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1,20x1,10x1,60 m Comes from a vocational school - Powered feed in X, Y, and Z axes - Coolant system - Machine vice Fodpfezfql Ssx Afpopi - Work light

Condition: ready for operation (used), Deckel Maho 27073757 / a Touch Panel for Deckel Maho CNC 432 control unit, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fpedpji D Upcefx Afpji

Condition: used, Year of construction: 1989, Technical details: x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm control: Contour 3 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90 ° quill travel: 60 mm range of revolution per miute: 40 - 4000 / 21 step U/min feed:: 2 - 3600 mm/min rapid traverse : 4000 mm/min Table dimensions: 620 x 390 mm clamping table: Winkeltisch mm table load: 0,45 t total power requirement: 12,5 kVA machine weight approx.: 1400 kg dimension machine xH: 1,5 x 2,1 x 2,0 m dimensions electric cabinet: 1,8 x 0,8 x 1,1 m Operation via control panel Grundig electronic with extension arm Fsdpfx Afeu Nc Twspjpi equipment: - cooling with pump - manual-control unit with steering wheel - machine illumination Machine can be demonstrated under power. *

Condition: used, Year of construction: 1985, Technical details: x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm control: Contour 1 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90° ° quill travel: 80 mm milling head vertical adjustable: 150 ( y-Achse) mm range of revolution per miute: Spindel vertical: 50 - 2.500 / 18 step U/min feed:: X/Y/Z: 2 - 1000 steples mm/min rapid traverse : X/Y/Z: 2000 mm/min revolution per minute: horizontal: bis 1.000 U/min Table dimensions: 460 x 800 mm table load: 0,4 t total power requirement: 9,5 kVA machine weight approx.: 1900 kg Fjdpfsu Ndcmex Afpspi dimension machine xH: 2,35 x 2,2 x 2,0 m -Equipment: - Operation via control panel Grundig elektronic with boom - Cooling with pump - machine lighting - Linear interpolation, circular polarization in XY and XZ planes - quick chuck - manual control unit *

Condition: used, x-travel 300 mm y-travel 300 mm z-travel 400 mm Control Dialog 11 turning speed range - main spindle 40 - 4000 min/-1 tool taper SK 40 swivellable +/- 90 ° quill stroke 80 mm In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Accessories: - Cabin Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as prior sale reserved! Fedpoy Ty I Uofx Afpopi

Condition: reconditioned (used), Year of construction: 1987, Universal milling machine Manufacturer: DECKEL Model: FP 1 Aktiv Year of manufacture: 1987 - refurbished, newly painted, RAL 7035 light grey / RAL 7012 basalt grey Machine No.: 2102-3429 with warranty Geometric accuracy check with test report Accessories: - 3-axis Active digital display HEIDENHAIN TNC 113 with Active function in the X, Y, and Z axes - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with draw-in thread S 20 x 2 Fpodpfxohtrd Io Afpji - Coolant system - Central lubrication, electric - Operating manual - used, sold as is -

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric Fodpfxjx S Edle Afpopi - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Condition: reconditioned (used), Year of construction: 1987, Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 2 Aktiv Fpsdpex A Eddsfx Afpei Year of manufacture: 1987 – overhauled, newly painted with new machine electrics RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2202-11579 Milling head type: 2271 Milling head no.: 300-3606 with warranty Geometric acceptance with inspection report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 - Fixed table 660 x 380 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Central lubrication, hand-operated - Coolant system - Operating manual - used, as seen -

Condition: reconditioned (used), Year of construction: 1984, Universal machining center Manufacturer: DECKEL Model: FP 1 Aktiv Year of manufacture: 1984 - refurbished, newly painted RAL 7035 light gray / RAL 7012 basalt gray RAL 5008 gray-blue Machine no.: 2101-1067 Milling head type: 2171 Milling head number: 1086 with warranty Geometric acceptance with test report Fpjdpfx Afjchfyfopsi Accessories: - 3-axis Active digital display HEIDENHAIN TNC 113 with Active function in X and Z axes - Fixed table 600 x 200 (T-slot: 12 mm) - Vertical milling head SK 40 with draw-in thread S 20 x 2 - Coolant system - Operating manual - used, as is -

Condition: reconditioned (used), Year of construction: 1983, Universal tool milling machine Manufacturer: DECKEL Model: FP 2 Aktiv Year of manufacture: 1983 – overhauled, newly painted RAL 7035 light grey / RAL 7012 basalt grey RAL 5008 grey-blue Machine no.: 2202-10799 Milling head type: 2271 Milling head number: 300-1406 with warranty Geometric inspection with test report Accessories: - 3-axis Active digital display Fodpfx Afofzk Hfspjpi HEIDENHAIN TNC 111 - Fixed table 700 x 280 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw-in thread S 20 x 2 - Central lubrication, manually operated - Coolant system - Operating manual - used, as is -

Condition: used, Year of construction: 1989, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1989 - workshop tested Fpedpfxjr En Dyo Afpoi Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 geometric acceptance with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X-, Y- and Z-axis - Fixed table 600 x 210 (T-slot: 12 mm) - SK 40 vertical milling head with tightening thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating instructions used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Fpsdpfex It Rxex Afpsi Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Manufacturer: DECKEL Model: FP 4 M Aktiv Year of manufacture: 1988 – overhauled, newly painted RAL 7035 light gray / RAL 7012 basalt gray RAL 5008 gray-blue Machine no.: 2203-7097 with warranty Geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN TNC 113 - Fixed table 800 x 460 mm (T-slot: 14 mm) Fsdpelfc U Dsfx Afpopi - Vertical milling head SK 40 with hydraulic tool clamping DIN 2080 - Chip collection tray - Central lubrication, electric - Coolant system - Operating manual Used, as is The machine is technically in the condition corresponding to the year of manufacture.