Used Deckel Fp4At for sale (693)

Condition: repair required (used), Year of construction: 1996, functionality: limited functionality, machine/vehicle number: 500 050, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, torque: 82 Nm, controller manufacturer: Grundig / Heidenhain, controller model: MillPlus, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 400 mm, workpiece diameter (max.): 50 mm, workpiece weight (max.): 200 kg, total height: 2,200 mm, total length: 2,200 mm, total width: 1,800 mm, table width: 500 mm, table height: 800 mm, table length: 700 mm, table load: 200 kg, rotary table diameter: 500 mm, overall weight: 3,000 kg, spindle speed (min.): 20 rpm, Deckel Maho DMU 50 T – CNC universal milling machine (year of manufacture 1996) Bsdpfx Aijz D Ab Tsajlp For sale is a CNC universal milling machine, Deckel Maho DMU 50 T, equipped with the proven MillPlus control system. This machine is ideally suited for toolmaking, the production of single parts and small series, as well as for training workshops. Key features: Control system: MillPlus (Deckel Maho) Travel distances: X = 500 mm / Y = 400 mm / Z = 400 mm Table: Swiveling round table for flexible 5-axis machining Equipment: Full enclosure with sliding doors and ergonomic control panel The machine has a fault in the X-axis. When moving, it triggers the emergency stop. Since the machine has not been used since 2018, repairing it is not worthwhile for us. Sales and transport conditions (Incoterms): Sales condition: EXW (Ex Works / Ex Location) Dismantling & Loading: The dismantling, removal from the building, loading, and transport must be fully organized and carried out by the buyer (at their own cost and risk). Dismantling can also be carried out for a fee. Various accessories included. The machine can be inspected on site by appointment.

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, CNC Horizontal Machining Center with Pallet Changer DECKEL MAHO DMC 55 H duoBLOCK Year of manufacture: 2008 Control system: Siemens Sinumerik 840D Machine type: CNC Horizontal Machining Center Number of axes: 4 (X, Y, Z, B) Spindle hours: approx. 44,000 hours Travel distances X-axis: 560 mm Y-axis: 600 mm Bjdpfx Aio Agn Scjaelp Z-axis: 600 mm B-axis: 360° NC rotary table Rapid traverse rate X/Y/Z: 40 m/min Positioning accuracy according to the manufacturer: ± 0.003 mm Repeatability according to the manufacturer: ± 0.001 mm Main spindle Spindle speed: 12,000 rpm Tool interface: HSK-A63 Spindle power: 20 kW (40% duty cycle, standard version according to the manufacturer) Spindle torque: 110 Nm (standard version according to the manufacturer) Tool changer Tool magazine: 40 tool positions Tool interface: HSK-A63 Maximum tool diameter: 80 mm Maximum tool diameter with free adjacent positions: 160 mm Maximum tool length: 330 mm Automatic tool change Work table and pallet changer Automatic 2-position pallet changer Pallet dimensions: 400 × 400 mm Maximum pallet load: 500 kg Maximum workpiece height: 850 mm NC rotary table with 360° B-axis Equipment Siemens Sinumerik 840D CNC control system HSK-A63 main spindle with 12,000 rpm 40-position tool magazine Automatic 2-position pallet changer NC rotary table / B-axis Internal cooling system (IKZ) Chip conveyor Measuring probe Coolant system Electrical connection data Mains connection: 400 V / 50 Hz Connected power: approx. 58 kVA Maximum circuit breaker rating: approx. 100 A Dimensions and weight Length: approx. 5,000 mm Width: approx. 3,000 mm Height: approx. 2,800 mm Machine weight: approx. 11,000–13,000 kg The machine has been regularly maintained. All hydraulic and air hoses have been replaced. Emergency stop switch on the control panel is defective. Clamping devices and tool holders are not included.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 with special paint finish and 3-axis digital readout K&C NEW, in excellent condition. Technical data: >> Machine no. 2200-1958 >> Long sliding head >> 3-axis digital readout K&C NEW >> Swivel table with tilting and rotating function >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travels X/Y/Z: 500/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical and horizontal quill, extendable - SK-40 Bsdpfxo Agwvms Aiaolp >> Collet system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout K&C, newly installed with manufacturer's warranty and operating manual. Display unit: Setting reference points, setting zero points, entering coordinates, switching between mm/inch, absolute or incremental coordinates, circular functions, hole patterns, radius milling functions, etc. >> Coolant system About the machine: Offered is a Deckel FP2 universal milling machine in very good condition. The Deckel has excellent guides and is geometrically perfect. The long sliding head runs smoothly even at maximum speeds. The Deckel has very little backlash and all spindles can be moved easily. The machine has been completely disassembled and repainted. An oil change has been performed. Mechanically and electrically tested. The digital readout from K&C makes working easier and even more precise. Furthermore, you have a 1-year warranty on the new digital readout. Take the opportunity to inspect and test the Deckel on site under power.

Condition: good (used), Year of construction: 2013, operating hours: 21,000 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, controller manufacturer: Siemens, controller model: Sinumerik, table load: 200 kg, rotational speed (max.): 12,000 rpm, spindle speed (min.): 10 rpm, spindle speed (max.): 12,000 rpm, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Universal machining center DECKEL MAHO DMU 50 Ecoline Year of manufacture: 2013 Control system: Sinumerik 840D Operating hours: 21,000 hours Technical data: Spindle speed: 10 - 12,000 rpm Drive power: Internal cooling system pressure: 12 bar Tool holder: SK 40 Number of magazine positions: 30 Travel distances: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: +5/-110° C-axis: 0.001° Bedpfx Aoz Td Areiaolp Accessories: - Chip conveyor - Coolant system, 12 bar Further data and images will follow. All technical specifications are without guarantee.

Condition: used, Year of construction: 1991, functionality: fully functional, Equipment: rotational speed infinitely variable, Tool grinding machine Manufacturer: DECKEL, Type: S 11 Year of manufacture: 1991 Technical details Manufacturer: DECKEL Type: S11 Year of manufacture: 1991 Clamping area: 500 x 180 mm Max. tool diameter: between centers 130 mm, with overhanging clamping 620 mm Max. tool length: between centers 270 mm Grinding stroke: 190 mm longitudinal Transverse adjustment of the tool slide: 100 mm Vertical adjustment of the grinding head: 325 mm Longitudinal adjustment of the grinding spindle: 5 mm Spindle speed: 2,000 to 10,000 rpm, continuously adjustable Drive power of the grinding motor: 1.1 kW Total power consumption: approx. 2.2 kW Connection voltage: 400 V / 50 Hz Max. grinding wheel diameter: 125 mm Workpiece spindle mounting: SK 40 T-slots: 12 mm on the machine frame Machine weight: approx. 850 kg Dimensions: L 1.60 x W 1.10 x H 1.60 m Bodpfxe Afyq Is Aiajlp Equipment • 5-axis adjustability • Motorized height adjustment of the grinding head • Opto-electronic measuring system with 2-axis digital display • Very large range of accessories as shown in the photos • Technical documentation All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2011, DMG MORI HSC 55 linear Operating hours: 18,600 h spindle hours since replacement max. 1000 h Bljdpfx Aio Agp S Usaop NEW SPINDLE Control: Heidenhain iTNC530 Travel: X-450 mm, Y-600 mm, Z-400 mm A-axis: C-axis: 360 A-/C-axis speed: 110 U/min Express travel X/Y/Z: 80 m/min clamping surface: 400 x 400 mm max. table load: 200 kg Spindle speed: 20 - 28,000 RPM tool holder: HSK-A63 tool magazine: 120 seats Tool measurement: BLUM Laser probe: Yes Chip conveyor and internal coolant lubricant supply (IKZ): 40 bar

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 from a training center Technical data: >> Machine no. 6884 >> Rotary, tilting, and swiveling table >> Speed: 40 - 2000 RPM >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travel distances X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical quill and horizontal quill - SK-40 >> Clamping system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> Coolant system About the machine: A Deckel FP2 universal milling machine in good condition is offered. All spindles can be moved easily. All bellows are new. An oil change has been carried out. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel machine on site while it is powered. The machine is immediately available. For an additional charge, the machine can be equipped with a new K&C digital display. Bede Agn Rxjpfx Aiaelp

Condition: used, Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, controller model: 840D Powerline, workpiece height (max.): 1,580 mm, workpiece diameter (max.): 1,000 mm, total height: 3,394 mm, total length: 5,551 mm, total width: 3,375 mm, table width: 800 mm, table length: 1,000 mm, overall weight: 17,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are pleased to offer this CNC 5-axis universal machining center. It is a Deckel Maho (DMG) DMC 100U Duoblock from 2008 with the Siemens 840D control. Technical specifications: Table dimensions: 1000 x 800mm Number of pallets: 2 Max. workpiece dimensions: ø1000x1580 mm Max. workpiece weight: 1000kg X-axis travel: 1000 mm Y-axis travel: 1000 mm Z-axis travel: 1000 mm A-axis (rotation of the head): 130 ° (0,001 °) C-axis (work table rotation): 360° Spindle speed: 18,000 rpm Spindle mount: HSK A-63 Blede Agvh Tjpfx Aiaop Spindle motor: 28/19 kW Number of positions in tool magazine: 60 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you.

Condition: good (used), Year of construction: 2012, Ref. -No.: 10659 Manufacturer: DECKEL MAHO Type: DMC 835V Year of construction: 2012 Type of control: CNC Control: Haidenhein iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 1541XXX X-Travel: 835 mm Y-Travel: 510 mm Z-Travel: 510 mm Number of T-slots: 5 Max. Tool Weight: 6 kg Max. Tool Length: 250 mm Max. Tool Diameter: 80 mm Tool change time: 1,6 s T - groove width: 14 mm T - slot spacing: 100 mm Tool Taper: SK40 Bsdpfszw Tw Usx Aiajlp Numbers Of Tools In Magazin: 30 Spindle Speed: 12000 RPM Max. Torque: 130 / 87 Nm Turning Speed Range - Stepless: 30 mm / min Total Power Requirement: 35 kW Dimensions Of The Machine Ca.: 4,5 x 3,5 x 2,7 m Weight Of The Machine Ca.: 5 t Changeover time chip - chip: 6 sec Feed rate: 1 - 20.000 (X / Y / Z) High pressure cooling: 20 bar Further information: The machine can be inspected while powered on by prior arrangement.

Condition: good (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,600 rpm, controller model: DECKEL Contour 3, TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Table length: 700 mm Table width: 460 mm Table load capacity: 350 kg Spindle speed: 40–3,600 rpm Tool interface: SK 40 MACHINE DETAILS Bjdpfx Ae Afxabsiaslp Control system: DECKEL Contour 3 EQUIPMENT Automatic tool changer

Condition: repair required (used), Year of construction: 1999, functionality: not functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, controller manufacturer: Heidenhain, controller model: TNC 310, table width: 500 mm, table length: 700 mm, table load: 200 kg, rotational speed (max.): 5,000 rpm, overall weight: 3,000 kg, spindle speed (max.): 5,000 rpm, spindle nose: SK40, input voltage: 400 V, DECKEL MAHO DMU 50 M CNC | Heidenhain TNC 310 | Year 1999 | Damaged For sale: Deckel Maho DMU 50 M CNC machining center from 1999, equipped with Heidenhain TNC 310 control. The machine is sold as damaged – it displays error 120202 during startup, therefore it is offered as a unit for repair or for parts. The error indicates a lack of connection to the PLC controller. Technical data * Manufacturer: Deckel Maho * Model: DMU 50 M * Year of manufacture: 1999 * Control: Heidenhain TNC 310 * Machine type: Universal CNC milling center (3+2 axes) Working parameters * X-axis travel: 500 mm * Y-axis travel: 400 mm * Z-axis travel: 400 mm * Table surface: 700 × 500 mm * Maximum table load: approx. 200 kg * Spindle speed range: 0-5000 rpm * Spindle taper: SK40 * Maximum working feed rate: 5000 mm/min * Rapid traverse: 5 m/min ## Equipment * Heidenhain TNC 310 control * Manual tilting/rotary table: * B-axis: from -10° to +95° * C-axis: 360° * Cooling system * Safety guards ## Technical condition The machine is sold as non-functional. Error message 120202 appears during startup. The error has been discussed with a service technician, who indicates damage to the middle LT module - the module itself reports error 1. Repairing the module, depending on the extent of the damage, costs between 5,000 and 8,000 PLN. The machine is sold in the condition shown in the photos. Ideal for a service company, someone involved in CNC machine repair, or as a source of spare parts. It was in continuous use until October 2024. ## Additional information * Year of manufacture: 1999 * Weight: approximately 3000 kg * Power supply: 400 V * Loading possible. * Viewing by prior arrangement. Blodpfe Adzt Isx Aiajp Price: negotiable I will issue a VAT invoice. The stated price is the net price. Please contact me by phone and arrange to view the machine. Machine loading is not possible - sold without loading. We do not have a forklift with the appropriate lifting capacity.

Condition: used, Year of construction: 2003, functionality: fully functional, Sale only within the EU. Without the pneumatic tensioning device! Bljdpfx Aisz N Eaksasp Dismantling and loading will be carried out by the seller. Transportation will be handled by the buyer.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, DMU90P duoBLOCK Operating hours: 52,700 h Operating hours: 22,700 h Immediately Available! Control: HDH iTNC640 Bedj Aa Ayuepfx Aiaolp Travel: X-900 mm, Y-1050 mm, Z-850 mm clamping surface: 900 x 700 mm max. table load: 1.800 kg Spindle mount: SK50 Spindle speed: 12,000 rpm tool magazine: 60 seats Internal coolant supply (IKZ) and chip removal package: 40 bar Tool measurement: BLUM Laser probe: Heidenhain electric handwheel: Yes

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, CNC horizontal machining center with pallet changer DECKEL MAHO DMC 55 H duoBLOCK Year of manufacture: 2008 Control system: Siemens Sinumerik 840D Machine type: CNC horizontal machining center Number of axes: 4 (X, Y, Z, B) Spindle hours: approx. 46,000 h Travel distances X-axis: 560 mm Y-axis: 600 mm Z-axis: 600 mm B-axis: 360° NC rotary table Rapid traverse X/Y/Z: 40 m/min Positioning accuracy according to manufacturer: ± 0.003 mm Repeatability accuracy according to manufacturer: ± 0.001 mm Main spindle Spindle speed: 12,000 rpm Tool holder: HSK-A63 Spindle power: 20 kW (40% duty cycle, standard version according to manufacturer) Spindle torque: 110 Nm (standard version according to manufacturer) Tool changer Tool magazine: 40 tool positions Tool holder: HSK-A63 Maximum tool diameter: 80 mm Maximum tool diameter with free adjacent positions: 160 mm Maximum tool length: 330 mm Automatic tool change Work table and pallet changer Automatic 2-position pallet changer Pallet dimensions: 400 × 400 mm Maximum pallet load: 500 kg Maximum workpiece height: 850 mm NC rotary table with 360° B-axis Equipment Siemens Sinumerik 840D CNC control system HSK-A63 main spindle with 12,000 rpm 40-position tool magazine Automatic 2-position pallet changer NC rotary table / B-axis Internal cooling (IKZ) Chip conveyor Measuring probe Coolant system Electrical connection data Mains connection: 400 V / 50 Hz Connected power: approx. 58 kVA Maximum fuse rating: approx. 100 A Bedpfe Agn H Usx Aiaslp Dimensions and weight Length: approx. 5,000 mm Width: approx. 3,000 mm Height: approx. 2,800 mm Machine weight: approx. 11,000–13,000 kg The machine has been regularly maintained. All hydraulic and air hoses have been replaced. Emergency stop switch on the control panel is defective. Clamping devices and tool holders are not included.

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP3 from a vocational school! Technical data: >> Machine No. 1847 >> Swivel-tilting table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel distances X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical and horizontal quill - SK-40 >> Collet system S20x2 >> Weight approx. 1300 kg Accessories and equipment: >> Central lubrication Bsdpfx Aj Agn Inoiajlp About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles can be moved easily. Most of the bellows are new. An oil change has been carried out. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel machine on-site while it is powered up. For an additional cost, the machine can be equipped with a new digital display from K&C.

Condition: ready for operation (used), Year of construction: 2007, Key Technical Specifications • Type: 3-axis vertical machining center / traveling-column milling machine • Travels (X / Y / Z): 2,200 mm / 560 mm / 720 mm (approx. 220 cm X-axis) • Table Size (L x W): 2,600 x 600 mm • Maximum Table Load: 2,200 kg • Spindle Speed: Up to 18,000 RPM (common configuration for this model variant) • Tool Taper: SK 40 Blodpfjz Tc E Sjx Aiasp • CNC Control Unit: Heidenhain iTNC 530 • Machine Weight: Approximately 12 tons

Condition: good (used), Year of construction: 2004, Ref. -No.: 10629 Blsdps Ahkxysfx Aiasp Manufacturer: MICHAEL DECKEL Type: S20 Turbo Year of construction: 2004 Type of control: CNC-Steuerung Storage location: Halberstadt Country of origin: Germany Workpiece Diameter: 250 mm Max. Grinding length: 340 mm Max. Workpiece Weight: 50 kg Grinding wheel diameter (max.): 150 mm Turning Speeds: 8000 RPM Workpiece holder: SK 50 Further information: The machine can be viewed while powered up.

Condition: repair required (used), Year of construction: 1999, operating hours: 5,050 h, functionality: limited functionality, machine/vehicle number: 2885-0681, total height: 2,540 mm, total length: 1,900 mm, total width: 2,530 mm, Equipment: documentation/manual, Product CNC machining center Brand Deckel Maho Type DMC 63V Measurements WxDxH approx. 190x253x254 cm Year Blodpfx As Aguunsiaep volgens opgave 1999 Specifications Serial number 2885-0681, operating hours: 5,050. Siemens control system. Please note: The circuit board is defective; a replacement part is included and is part of this lot. The machine has been disconnected from the power supply and all fluids have been drained. Details Please note! The buyer is responsible for providing lifting and hoisting equipment. Please note! The maximum floor load is 1,600 kilograms per square meter.

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, CNC Universal – Machining Center DECKEL MAHO DMU 95 monoBlock NEW DMG Design With Heidenhain TNC 640 path control Year of manufacture: 2024 Travel ranges: X 950 Y 850 Z 650 Spindle speed range: 0 – 20000 rpm, stepless (HSK 63) With the following accessories: NC rotary table, 1000 mm x 750 mm clamping surface 3D measuring probe, Heidenhain TS 460 Vertical tool changer with 120 magazine slots (HSK 63) Tool breakage monitoring Chip flushing in the work area door Chip flushing gun with pump, 1 bar/40 l min Bodpfxs Agvvyj Aiaslp Blow-off air at the spindle center Accuracy package Application Tuning Cycle MPC Machine Protection Control Net Service App, Service Agent Operating mode 3 + 4 Electronic handwheel IKZ 40 bar with paper band filter Chip conveyor Rotoclear Coolant system Spindle oil cooler Oil mist extraction 3-piece height-adjustable machine feet Control cabinet cooler (Rittal) Operating manuals THE MACHINE IS IN EXCELLENT CONDITION.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3 from a training workshop!! Technical data: >> Machine no. 1114 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travels X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical and horizontal spindle - SK-40 >> Collet system S20x2 >> Weight approx. 1300 kg Accessories and equipment: >> Coolant system >> Central lubrication About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles can be easily moved. All bellows are new. An oil change has been carried out. Mechanically and electrically inspected. Take the opportunity to inspect and test the Deckel machine on-site while it is powered up. Bodj Agbypjpfx Aiaslp For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3 from a vocational school!! Technical specifications: Bledpfx Ais Afyy Hoaop >> Machine no. 1212 >> Swivel and tilting table >> Speed: 40 - 2000 rpm >> Feed rate and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel distances X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical quill and horizontal quill - SK-40 >> Collet system S20x2 >> Weight approx. 1300 kg Accessories and equipment: >> Coolant system >> Central lubrication About the machine: For sale is a Deckel FP3 universal milling machine in good condition. All spindles can be moved easily. Most of the bellows are new. An oil change has been performed. Mechanically and electrically inspected. Take advantage of the opportunity to inspect and test the Deckel on-site while it is powered. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: good (used), functionality: fully functional, overall weight: 700 kg, For sale is a used Deckel FP1 milling machine in good working condition. The machine has feed in the X and Z axes. Travel ranges XYZ: 300x150x340mm Tool holder: SK40 S20x2 Spindle speeds: 40-2000 rpm Quill with 60mm stroke Ideal machine for toolmaking or prototype production. Already the new version of the FP1 with selector dials for speed and feed selection. Included: - High-quality hydraulic vise - Chip tray Milling cutters and tool holders can also be included upon request. Blodpfez Aa Idex Aiajp Loading options (forklift) are available. Shipping is also possible upon agreement. Inspection under power and collection in 5023 Salzburg.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 2882-0275, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, controller manufacturer: Deckel Maho, controller model: Dialog 112, workpiece length (max.): 1,250 mm, workpiece width (max.): 800 mm, workpiece weight (max.): 1,250 kg, total height: 2,900 mm, total length: 3,900 mm, total width: 4,100 mm, table width: 800 mm, table length: 1,250 mm, table load: 1,250 kg, rotational speed (max.): 8,000 rpm, overall weight: 9,100 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 10,000 W, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, For sale is a vertical CNC machining center, Deckel Maho DMC 100 V, manufactured in 1998. The machine is in good condition and fully functional. Technical data: Manufacturer: Deckel Maho GmbH Type: DMC 100 V Year of manufacture: 1998 Serial number: 2882-0275 Travel in X: 1,000 mm Travel in Y: 800 mm Travel in Z: 700 mm Table size: approx. 1,250 × 800 mm Table load: approx. 1,250 kg Spindle speed: up to 15,000 rpm Tool holder: SK 40 Tool magazine: 30 positions Operating voltage: 400 V / 3-phase Rated current: 70 A Weight: approx. 9,100 kg If you are interested or have any further questions, please do not hesitate to contact us. Location: 30827 Garbsen. Bsdpfxez I R Eus Aiajlp

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 2820-0484, total height: 1,930 mm, total length: 2,060 mm, total width: 2,430 mm, Equipment: documentation/manual, Product Milling Machine Brand Deckel Type FP 3A Measurements WxDxH approx. 206x243x193 cm Specifications Serial number 2820-0484, Grundig control unit. The machine has been disconnected from the power supply and all fluids have been removed. Bjdpe Aguy Esfx Aiaolp Details Please note! The buyer is responsible for providing lifting and hoisting equipment. Please note! The maximum floor load is 1,600 kilograms per square meter.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Deckel FP 1 MK with TNC 123, year of manufacture 1994, with CE marking. Spindle speeds: 40 - 2000 rpm, SK 40. Travel distances: X 300, Y 160, Z 340. Stepless feed rate + rapid traverse in all axes. Weight: approx. 880 kg. Accessories: Universal table, electric central lubrication system, coolant system, Bljdezx Ep Sjpfx Aiasp collet set, 5 tool holders, Röhm machine vise, swarf drawer. Condition: Original, not repainted, smooth operation at all spindle speeds and axis movements, and flawless guidance. Can be inspected while powered on. Free loading at D-88433 Schemmerhofen.