Used Deckel Fp6 for sale (677)

Condition: good (used), DECKEL Tool Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Laedpfxoxyc Tke Aansk Travel: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Expansion of working area to: 300 x 260 mm Spindle speeds, vertical/horizontal: 40 – 2,000 rpm Gear stages: 16 Spindle taper: SK 40 Tool holder: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z axis: 5 – 500 mm/min Feed adjustment: stepless Rapid traverse X/Z axis: 1,200 mm/min Feed Y axis: manual Fixed angle table: 600 x 210 mm Tilting vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1,250 x 1,200 x 1,850 mm Technical data subject to change! Features: - For horizontal machining, the milling head is swiveled 90 degrees and pushed to the rear. - 3-axis precision digital readout HEIDENHAIN - Stepless feed on X/Z axis - The machine was partially overhauled by a specialist company a few years ago. Equipment: - 3-axis digital readout HEIDENHAIN - Micro coolant spray system - Fixed angle table - Chip tray - Machine lamp - Machine feet Further accessories available on request! Condition: Good to very good, from a training workshop Available from March 2026

Condition: used, Year of construction: 2010, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Heidenhain iTNC 530 tool taper SK 50 number of tool places 120 Pos. On-time hours ca. 66737 h spindle hours ca. 36316 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Fully protective cabin with sliding doors and interior lighting - Setup room - Tool measurement in the work area with BLUM laser - 3D measuring probe - Operating modes 3 bar internal coolant supply with 600 l tank and paper belt filter - Chip flushing gun with 1 bar/ l pump - Chip conveyor - Brankamp monitoring system - 3-color signal light - Coolant ring nozzle - Blow-air cooling system - Coolant system - Oil/emulsion mist separation system - Control cabinet cooling unit - Operating manuals Accessories, tools, and clamping devices shown are only included in the scope of delivery Ledpfxsxylqxs Aaneak if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2007, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG Deckel Maho Machining Center 5-Axis Simultaneous Model: DMU 50 EVO Linear Year: 2006 Complete Machine Lasdsxtqfnepfx Aanek With Documentation CNC Heidenhain type Mill Plus

Condition: ready for operation (used), Deckel FP 2 NC Universal Milling Machine Universal Milling Machine TNC 320 / 321 Travel distances: x- 300mm | y- 300mm | z- 400mm Stepless spindle speed 31.5 - 5000 rpm Feed rates 2-4000 mm/min Rapid traverse 4000 mm/min Tool holder SK 40 Quill stroke 80 mm Machine weight 1350 kg You are welcome to arrange an inspection appointment. We can also organise affordable shipping for you! You will receive a proper invoice. For international customers, we can also provide a net invoice. The requirement is a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers. The specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Lsdpfx Aasxfkm Asnjak Variations in technical data or errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN iTNC 530 Table dimensions 500 x 380 mm table weight 500 Kg c-axis 0.001º ( ± 360º) 0 b-axis 180 ° rapid traverse X-axis 80 m/min feeds 50 m/min spindle turning speed range 18.000 U/min spindle taper BT- 40 Ljdpfx Aajxluf Asnoak spindle drive 30 kW Internal cooling system 40 bar handwheel HEIDENHAIN HR-410 Working hours 51.770 h Spindle hours 14.627 h total power requirement 50 kVA weight of the machine ca. 6,5 t

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: Heidenhain Mill Plus, table width: 500 mm, table length: 500 mm, rotary table diameter: 500 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,618 h, coolant supply: 40 bar, spindle nose: SK40 (DIN69871), number of slots in tool magazine: 60, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The 5-axis DMU50 eVolution has been removed from production in working order and can also be seen in operation in our showroom (by appointment). The machine is equipped with 40 bar internal spindle cooling, chip conveyor, 60-tool changer, Renishaw tool setter, Heidenhain 3D probe, 18,000 RPM spindle, Visiport, and original factory extraction system. Ljdoxnixispfx Aanoak

Condition: excellent (used), DECKEL Universal Milling Machine FP 1 No. 2101 with HEIDENHAIN 2-axis Digital Readout Travel Paths: X/Y/Z: 300 x 160 x 340 mm Manual Adjustment Milling Head Arm: 100 mm Extension of Working Area to: 300 x 260 mm Spindle Speed Vertical/Horizontal: 40 – 2,000 rpm Gear Steps: 16 Spindle Taper: SK 40 Tool Fixture: S20 x 2 (Deckel Standard) Quill Travel: 60 mm Feed X/Z Axis: 5 – 500 mm/min Feed Control: stepless Lasdpexyc N Eefx Aansk Rapid Traverse X/Z Axis: 1200 mm/min Feed Y Axis: manual Fixed Angle Table: 600 x 210 mm Tilting Vertical Head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data not binding! Features: For horizontal machining, the milling head is swivelled 90 degrees and slid to the rear. 2-axis precision digital readout HEIDENHAIN POSITIP VRZ 719 Infinitely variable feed on X/Z axis The machine underwent partial overhaul by a specialized company a few years ago. Equipment: 2-axis HEIDENHAIN digital readout Fixed angle table Chip tray Machine lamp Machine feet Further accessories on request! Condition: good to very good from training workshop Available from March 2026

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: ITNC 530, table width: 560 mm, table length: 760 mm, table load: 600 kg, rotational speed (min.): 20 rpm, rotational speed (max.): 8,000 rpm, overall weight: 3,600 kg, spindle speed (min.): 8,000 rpm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 20, Equipment: documentation/manual, rotational speed infinitely variable, Deckel Maho DMC 635 - Control: Heidenhain ITNC 530 - Travel range X-, Y-, Z-axis: 635 / 510 / 460 mm - Feed rate: 0.01–10,000 mm/min - Rapid traverse: 30 m/min - Spindle speed: 20–8,000 rpm - Table clamping area: 790 x 560 mm - Tool holder: SK40 DIN 69871 - Tool magazine with 20 stations - Machine weight: approx. 3,600 kg - Rinsing gun - Coolant/air blast selection (M25) - Handheld control unit The machine is in very good condition, with only a few spindle operating hours. Inspection and testing under power at our premises is of course possible. We are pleased to offer you transport, installation, and commissioning at your site as well. Everything from one source: We, Baumgärtner CNC GmbH & Co. KG, are a company specializing in: - Service - Maintenance - Overhauls Laodpsx Hfngjfx Aansk - Automation of DMG machines and other well-known manufacturers. We support you! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repairs, you can rely on us.

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 milling machine equipped with a 3-axis Heidenhain TNC113 active control, notable for its ease of operation. This modern version, built in 1989, features central lubrication, an electric coolant pump, and a machine lamp, among other benefits. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on-site at any time. Delivery time: on request Machine no.: 2102-xxxx Table: Rigid angled table or rotary-tilt-swivel table Travel (X/Y/Z): X 300 mm / Y 160 mm / Z 340 mm Quill travel: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool taper: SK40 Feed: Infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, infinitely variable feed regulation on all 3 axes, coolant unit, central lubrication, technical documentation, leveling feet, safety equipment (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines undergo thorough inspection - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - If required, you can order additional accessories such as tools, etc., directly - We can also install further equipment such as safety devices upon request Lsdjpy Eldjpfx Aansak - We are happy to handle shipping and/or installation

Condition: used, Year of construction: 2009, Offered here is a used machining center from the manufacturer Deckel Maho DMG. The machine is powered up and can be inspected at our facility. Free loaded on truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel distances X-, Y-, Z-axis: 1250 x 1000 x 1000 mm Feed rate X-, Y-, Z-axis: 20 - 60,000 mm/min Lajdpfx Ajw Ew T Soanjk Rapid traverse X-, Y-, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 °/min Max. rotation of table plate: 30 rpm Spindle speed: 20 - 8,000 rpm Gear stages: 2 Max. workpiece diameter: 1250 mm Max. workpiece height: 1580 mm Clamping surface: 800 x 800 mm Max. workpiece weight: 1,500 kg Weight of pallet: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Max. tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of machine (without magazine or other accessories): approx. 20,000 kg Space requirement: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Accessories: Chip conveyor with coolant tank Coolant system 4x machine pallets Tool magazine Oil mist extraction Various new spare parts: 1x Length measuring system Y-axis (new) 1x Lubrication unit 230V 0.12 30 bar (new) 1x ZAHNRADP-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox *F1C-A25 (new) 1x Conversion kit power module (new) 1x Lifting devices for the machine

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40–2000 rpm, 16 steps Motor power 1.0 and 1.6 kW, pole-changing Power supply 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at vertical milling head 60 mm - Swiveling, rotating, and tilting angle table - Coolant pump in machine base - Separate control cabinet Space requirements L x W x H 1100 x 1100 x 1600 mm Ljdpfxeghtvao Aanoak Weight 690 kg In good condition

Condition: used, Year of construction: 1979, x-travel 800 mm y-travel 300 mm z-travel 400 mm turning speed range 25 - 2.000 U/min power capacity 4 kW feed 5 - 500 m/min rapid traverse 1,5 m/min work table: 1.000 x 700 Lajdjwwwqhepfx Aansk tool taper SK40 weight 1,8 t dimensions of the machine ca. 2,50 x 2,40 x 2,00 m The machine is in good condition. The digital display is defective (the scales are ok) Extra interchangeable milling head. No accessories.

Condition: good (used), Year of construction: 2010, operating hours: 43,000 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rotational speed (max.): 14,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, rotational speed infinitely variable, Machine has 2 pallet. Control is Siemens. Spindle was changes directly frm DMG servis - new spindel has cca 500 hours Lsdpfx Aaev Acpbsneak

Condition: excellent (used), Tool Milling Machine DECKEL FP 2 with new 3-axis digital readout from laboratory operation - Well-maintained original condition - Travel X/Y/Z 400x200x400mm - Digital readout 3 axes "NEW" - Swivel table – clamping surface 700x350mm - Spindle speed range 40 – 2000 rpm - Automatic feed / rapid traverse on all three axes - Tool holder ISO 40 - Vertical - horizontal milling device - Vertical head swiveling with quill - Coolant system - Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1500Kg Lodpox Hahujfx Aanoak Subject to errors and input mistakes.

Condition: good (used), Year of construction: 2002, operating hours: 14,798 h, functionality: fully functional, machine/vehicle number: 22850028382, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, DMG Deckel Maho DMC 63 V machining centre, year 2002, in good condition. Robust and precise machine, ideal for general engineering, tooling, and SMEs. 3 axes, travels approx.: X: ~630 mm, Y: ~500 mm, Z: ~500 mm TNC Heidenhain 530 Spindle approx. 15,000 hours External coolant supply Fully enclosed guarding Manufactured in Germany (DMG – Deckel Maho) Documentation included Laodpfx Aaex H Swzonek Loading/transport costs at buyer’s expense.

Condition: used, Geldmacher MST / Deckel FP4M Milling Machine, Tool Milling Machine Weight: approx. 1,450 kg Year of manufacture: 2012 Installation dimensions: Reference value: approx. 2,500 × 2,700 × 2,100 mm (Length × Depth × Height) Travels: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Spindle taper / Tool holder: SK 40 Quill stroke: Vertical quill: approx. 90 mm travel; additionally, the vertical milling head is movable on the spindle head Spindle speed range: Approx. 50 - 2,500 rpm Feed rates: Feed: approx. 8 - 630 mm/min; Rapid traverse (max. feed rate): approx. 1,300 mm/min The machine is in very good condition. You are welcome to arrange an inspection. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, we can issue a net invoice (VAT-free) provided you supply a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers as well. The stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Laedpfxjxcldks Aanek Deviations from the technical data as well as mistakes in the article description may occur and are subject to change.

Condition: reconditioned (used), Year of construction: 2007, CNC Vertical Machining Center DECKEL MAHO DMC 70 eVolution With Heidenhain iTNC 530 path control system Year of manufacture: 2007 Travel paths: X 750 Y 600 Z 520 Speed range: 0 – 18,000 rpm, stepless (SK 40) Including the following accessories: 2-axis NC swivel rotary table, 700 mm x 500 mm clamping surface 2-station pallet changer Vertical tool changer with 92 magazine slots (SK 40) Full enclosure with sliding doors and internal lighting Electronic handwheel 3D probe Heidenhain TS 640 Tool measurement in the work area (BLUM laser) Operating modes 3 + 4 IKZ 40 bar (internal coolant supply) Ledpjxxyd Dofx Aanjak Rotoclear (camera or viewing system) Chip conveyor Coolant system Chip flushing gun 4 height-adjustable machine feet Operating manuals

Condition: good (used), Internal item no.: 25094 Lsdpfx Aexxkwneanoak Universal milling machine Deckel FP1 + Accessories (machine vice / dividing head / SK40 tool holders / tailstock) The milling head is equipped with an M16 drawbar + Additionally, S20x2 drawbar The machine can be inspected under power.

Condition: used, Year of construction: 2003, operating hours: 68,200 h, functionality: fully functional, machine/vehicle number: 15035706824, controller model: ITNC 530 Softwarestand 11, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 21000 spindle hours Laodpfx Aox Ed Aqeanok

Condition: good (used), DECKEL MAHO 5-Axis Milling Machine DMU 50 eVolution - With probe - With handwheel - With several tools Good condition, fully functional, can be viewed and tested on site. Shipping also available abroad. Inspection: Please note that, to avoid misunderstandings, the item can gladly be inspected and tested under power before purchase. Please ask any questions before buying to avoid uncertainties. For general inquiries or to arrange a viewing appointment, I am available at the phone number provided below or above at any time. Subject to prior sale and errors in description. VAT is shown separately on my invoices. Lsdox Emxkopfx Aaneak Shipment via forwarding agent.

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Digital Readout AXESTA and 2 Accessory Cabinets from University Ownership, Excellent Condition Technical Data: >> Machine No.: 0494 Lodpoxxzl Nefx Aansak >> 3-axis digital readout AXESTA >> Swiveling, tilting, and rotating table >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Equipment: vertical & horizontal spindle >> Extendable vertical and horizontal quill - SK-40 >> Drawbar system S20x2 >> Weight approx. 1,300 kg Accessories and Equipment: >> 3-axis digital readout AXESTA >> Coolant system >> Central lubrication system 2 accessory cabinets with tooling: collets, horizontal and vertical tool holders, clamping tools, dividing head with 3-jaw chuck, vise, tailstock, faceplate, additional small swiveling, tilting and rotating table, rotary table, tailstock, vise, and much more About the Machine: Offered here is a Deckel FP3 universal milling machine in excellent condition. All spindles move easily. The machine comes with 2 tool cabinets filled with accessories. Previously owned by a university. An oil change has been carried out. Mechanically and electrically tested. The digital display makes operation easier and even more precise. Take the opportunity to view and test the Deckel FP3 under power on site.

Condition: used, Year of construction: 2004, Deckel Maho DMU 70 eVolution Year of manufacture: 2004, Operating hours: 68,400 h, Spindle hours: 25,024 h Heidenhain TNC 530, SK 40 tool holder, 5-axis swiveling table Travel paths 500 mm x 700 mm, internal cooling, chip conveyor, W + W filter system Filter system also from 2004, model EL-FI 1000, coolant tank capacity 900 l _____ Our general terms and conditions apply; additionally, the seller is not liable for typographical or data transmission errors. The visual appearance of the offered items corresponds to their age and the pictures shown. Lajdpstvfpcefx Aanek The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to businesses and without any guarantee.

Condition: used, Year of construction: 2000, functionality: limited functionality, machine/vehicle number: 2881-0469, Machine is running. Axes are moving. Spindle is rotating. Ledpfox Azqmjx Aansak

Condition: reconditioned (used), Year of construction: 2006, CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock With MILL PLUS iT path control system Year of manufacture: 2006 Travel paths: X 800 Y 800 Z 800 mm Spindle speed range: 0 – 8,000 rpm, stepless (SK 50) Including the following accessories: - NC rotary table, 900 mm x 700 mm clamping surface (maximum table load 1.4 t) - Universal milling head with controlled B-axis - Universal tool changer with 40 magazine stations, double gripper (SK 50) - Fully enclosed guard cabin with sliding doors and interior lighting - ICS – 40 bar (internal coolant supply) - Chip conveyor - Rotoclear Lodpfxoxn Acze Aaneak - 3D tactile probe Heidenhain TS 641 - Operating modes 3 + 4 - Electronic handwheel - 50 pcs. tool holders SK 50 - 3 height-adjustable machine feet - Transport device - Operating manuals

Condition: ready for operation (used), Working travels 300x150x340mm Universal table 600x260mm Spindle taper 40 Lasdsdr E Apopfx Aanok Spindle speeds 40-2000 rpm Digital read-out Misc.accessories MARCELS MASCHINEN CH