Used Die Sinking Edm Machine for sale (91,303)

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: M1042, Technical characteristics: # Working chamber: 980 × 860 × 900 mm (W × H × D) # Working table height: 935 mm # Mechanical weight: 1900 Kg Electrical Equipment # Power supply: 400 VAC, 3-phase, 50 Hz # Installed capacity: 30 kVA # Generator output: 450 A / 43 V DC (pulse technology included) Dimensions Csdpfx Adexx Nkyodork # Machine Dimensions (L×W×H): 2100 × 2000 × 2600 mm; Equipment consists of: # Main machine, electrolyte filtration system, industrial cooler, electrolyte treatment (CR-6 elimination) Dosing unit for electrolyte stabilization # Control system: Siemens HMI – User-friendly interface: Touch panel with integrated tool menu # Communication module for tooling needs: up to 12 signals # Safety features: Light curtain or sliding door for operator protection # Process monitoring: Real-time data tracking and short-circuit detection Machine status: WORKING # Safety light barrier – needs replacement

Year of construction: 2004, operating hours: 38,000 h, condition: excellent (used), Bobst SPanthera 106LE automatic die-cutter Size: 76 x 106 cm Technical Details: paper from 70 to 1000 gsm corrugated board up to 2 mm max. format: 760 x 1,060 mm min. format: 350 x 400 mm Crjdpfx Adjxx Txzodok speed up to 9,000 Equipment: stripping station optical register infeed automatic pile feeder adjustment ultrasonic double sheet detector Centerline 1 micrometric plate 1 plate 4 mm 2 closing frames quick Lock stripping Non-Stop delivery elevated 220 mm

Condition: used, Year of construction: 2019, Wire EDM machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of manufacture: 2019 Operating hours: approx. 9,500 Csdpsxpfy Sjfx Addsrk Controller: M800 D-CUBES Mitsubishi Electric control Hybrid construction Travel paths X/Y/Z: 400 x 300 x 220 mm Travel range U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS – Optical Drive System Tubular direct drives in XY axes Linear scales in XY axes Intelligent AT – Automatic wire threading For wire diameters 0.10 – 0.3 mm Automatic small hole detection 5 controlled axes – prepared for additional axes PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler

Condition: repair required (used), Manufacturer: FANUC Tip: A04B-0221-B201 The condition of the machine is unknown, it does not work, it is for sale in this condition, !!! We do not know what is the probleme! Cjdsik Hb Tjpfx Addork

Condition: used, Year of construction: 2000, functionality: fully functional, Equipment: compressor, cooling unit, documentation/manual, fridge, EDM (Electrical Discharge Machine) Brand: Sodick Crjdpfxox A Atij Addok Model: AQ325 Year: 2000

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 6.0138, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 462 mm, table load: 800 kg, controller model: CHARMILLES ROBOFIL 6020 SI, No minimum price – guaranteed sale to the highest bidder! This machine is being auctioned due to the closure of a business. Bidding commits you to timely collection between 26.01.2026 and 29.01.2026! Crodpfoxqalljx Addek TECHNICAL DETAILS Travel Paths Travel X-axis: 630 mm Travel Y-axis: 400 mm Travel Z-axis: 462 mm Travel U-axis: ±50 mm Travel V-axis: ±50 mm Workpiece Max. workpiece dimensions: 1,260 x 685 mm Max. workpiece height (immersed): 200 mm Max. load capacity: 800 kg Max. workpiece height between feedthroughs: 360 mm Measuring resolution: 0.5 µm Maximum manual speed: 15 mm/s Wire unwind speed Tension, taper offset Maximum workpiece height for wire threading: 300 mm Work tank dimensions: 1,355 x 760 x 425 mm MACHINE DETAILS Control: CHARMILLES ROBOFIL 6020 SI Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,700 x 2,900 mm Weight: 4,000 kg Electrical Details Operating voltage: 380/400 V Frequency: 50 Hz Rated current: 18 A EQUIPMENT Includes matching workshop drawer cabinet with accessories and documentation

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, *Black Week Special Offer until 28.11.2025* AGIECUT Challenge 2 eCut Year of manufacture: 2005 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without tank): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes control console with USB port Codpfsxyxfpox Adderk The machine will be cleaned, overhauled, and tested by us upon receipt of order. Commissioning and training can also be offered upon request.

Year of construction: 2022, condition: ready for operation (used), Technical specifications: Sheet Max. sheet size: 1060 x 740 mm Min. sheet size: 400 x 360 mm Stock range: Paper from 90 gsm Cardboard 157~2000gsm Corrugated board (E,B FLUTE) Crjdpfsw Hpxisx Addok Min. gripper edge: 4mm Die-cutting Max. die-cutting size: 1040 x 730 mm Max. pressure: 300 tons Max die-cutting speed: 7500 sph Max speed with stripping 6500 sph Rules height: 23.8 mm Main motor capacity: 11 kW Total power capacity: 23 kW Dimensions (L x W x H): 6000 x 4200 x 2400 mm Net weight: 16,000 kg 2 pcs die-cutting plates 2 pcs Die-cutting frames 1 pc tape inserter

Year of construction: 1991, condition: ready for operation (used), Main Drive Number of axis 3 Movement X-Axis Movement 500 mm Z-Axis Movement 270 mm Y-Axis Movement 350 mm Crjdpfsxxnklsx Addek This 3-axis Sodick A500L wire edm machine was manufactured in 1991. It features a 500 mm X-axis, 350 mm Y-axis, and 270 mm Z-axis, providing precise and efficient operations. If you are looking to get high-quality wire EDM capabilities, consider the Sodick A500L machine we have for sale. Contact us for more information. Application Types EDM

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 160 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 150 mm, overall weight: 2,200 kg, In working condition, removed from production, documentation available. Crodpfoxyyrqjx Addok

Condition: ready for operation (used), Year of construction: 1988, Control: FANUC Travel: X= 500, Y= 350, Z= 300 mm Max. table load: 350 kg Csdpfoxx Uatox Adderk Dimensions: 3500 x 2400 x 2400 mm Weight: 3,000 kg

Year of construction: 2019, condition: excellent (used), Web width: 500 mm Speed: max 150 m/min Csdpfxju Iucuj Addsrk Main unwinding - Unwinding with bearings on both sides - Pneumatic roller lift - Servo drive Vacuum cutting table BST web edge control Vacuum station (2x) - Servo drive - Adjustable web width Die cutting station - Servo drive - Pneumatically operated PowerBridge - Easy tool change thanks to Moving bridge - Register mark control Rewinder/unwinder - Separate servo drive for winder and auxiliary shaft - Direction of rotation on both sides - Pneumatic clamping - Automatic diameter calculation Tube Scan - web monitoring Web buffer unit ( static) Tandem rewinder - Separate servo drive in each case - Friction shafts - Cutting table for web fixing - Separate display S-CONtrol - Convenient and intuitive to operate - User and recipe management - Display on rail system

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, GF AgieCharmilles Progress VP2 Year of manufacture: 2011 Travel paths: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Cjdpfoxyw Ebjx Addsrk Maximum workpiece weight: 200 kg (submerged) / 450 kg (dry) Achievable surface finish: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and automatic re-threading after wire breakage Manual front door (accessible from one side) Including AGIEJOGGER hand-held box for convenient setup AGIE IPG-V generator with power module AGIEVISION 5 control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and fully overhauled after order intake. A test cut with optimal surface finish is performed prior to acceptance. You will receive a 6-month warranty on the machine. We are happy to offer on-site commissioning and training.

Year of construction: 2008, condition: ready for operation (used), A start-hole drilling machine Madra-EDM is available. Clamping dimensions X/Y: 600mm/400mm, max. workpiece height: 300mm, travel X/Y: 500mm/400mm, travel W: 250mm, travel Z: 0.01mm-380mm, max. electrode length: 400mm, max. workpiece weight: 500kg, drilling diameter range: 0.3mm-3mm. Machine dimensions X/Y/Z: approx. 1300mm/1300mm/2000mm, weight: approx. 1000kg. The electronics of the machine are defective, as the current for the erosion process is not provided. Dokumentation vorhanden. An on-site inspection is possible. Crsdpox Dcarjfx Addsk

Year of construction: 2017, operating hours: 7,456 h, condition: ready for operation (used), Main Drive Number of axis 3 Movement X-Axis Movement 600 mm Z-Axis Movement 310 mm Y-Axis Movement 400 mm This 3-axis Sodick VL 600Q wire EDM machine was manufactured in 2017. It features X-Travel of 600 mm, Y-Travel of 400 mm, and Z-Travel of 310 mm. If you are looking to get high quality EDM capabilities consider the Sodick VL 600Q machine we have for tact us for more information. Application Types EDM Cjdjxxdtcopfx Addork

Condition: good (used), Year of construction: 2023, operating hours: 5,001 h, functionality: fully functional, X working area max.: 3000 mm Y working area max.: 1500 mm Control: TRUMPF Control based on Rexroth IndraMotion MTX Machine: - Closed machine frame - Hybrid axis system - Linear magazine with 24 slots for clamps and tools - Hydraulic clamps (3 pieces) - Drives with maintenance-free three-phase motors - Repositioning with programmable hold-down device - Foot pedal for clamp closing - Parts chute on the right Punching Head: - Delta Drive - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch lubrication spray system - Punch slug extraction - Forming function - Stroke counter for punches Codsxxbwxjpfx Addjrk Control: - TRUMPF Control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Programmable cutting gas pressure - Automatic shut-off - Remote support interface - Program management - Production planning Data Transmission: - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Dual-beam safety light curtain Extended Standard Equipment: - 1st positioning pin (inside right) + Brush tables + MultiTool + Thread forming with thread counter + Thread-former breakage monitoring + Lubricant level monitoring + Marking/rapid beading + Deburring and rolling technology + Adaptive stroke calibration + Die lubrication spray system + Smart Punch Monitoring + Parts flap on the left + Parts conveyor belt for parts flap left + Collection tray for parts conveyor left + Sensor for parts chute + Parts conveyor for parts chute right + Additional clamp + 4x individually openable clamps + 4x height-adjustable clamps + Automatic clamp closing loading sensor system + Optical loading sensor + Automatic repositioning movement to compensate for loading tolerance + Repositioning device for DeltaDrive + Vibration-dampened installation + Chip conveyor with tilting bin + Machine status light + Warpage detection + Wireless Operation Point SheetMaster Compact 3000 x 1500 (AK05): - Loading station with spreading magnet for sheet separation - Suction frame - Vacuum sensors - Double sheet detection - Unloading cart for residual grids and microjoint sheets - Second operator station for loading and unloading + Compact setup for light grid and reference point system + Peeling system SortMaster Compact: - Machine-integrated automated small part removal - Suction frame for unloading good parts up to 600 x 400 mm (X x Y) - 2 suction bars (each suction cup individually controllable) - Unloading area 600 x 800 mm - Vacuum sensors for the suction circuits + X-axis extension - Extension of the unloading area to 1200 x 800 mm

Condition: used, Punching machine for, e.g., slipcases with many punching dies Crodsxw N Ntopfx Addek

Condition: excellent (used), functionality: fully functional, Angle Cutter INDUMASCH 260 Csdpfjxyl Evjx Adderk

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 2,154 mm, total length: 2,050 mm, total width: 2,234 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 800 mm, overall weight: 2,450 kg, warranty duration: 6 months, GF Machining Solutions CUT P350 Year of manufacture: 2020 AC CUT HMI-2 control system Travel paths (X / Y / Z): 350 x 220 x 220 mm Travel paths (U / V): 350 x 220 mm Credoxywz Aepfx Addjk Max. taper angle: +/- 30° at 200 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 800 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.08 µm Available wire diameters: 0.15 mm to 0.33 mm Overall system dimensions: 2050 x 2234 x 2154 mm Total system weight: 2450 kg The machine will be cleaned, completely overhauled, and tested for all functions by us after receipt of order. We are pleased to offer you commissioning of the machine as well as operator training on the control system.

Year of construction: 2014, operating hours: 16,500 h, condition: ready for operation (used), Main Drive Number of axis 5 Cedpfx Ajxxdqzeddork Movement X-Axis Movement 400 mm Z-Axis Movement 230 mm Y-Axis Movement 300 mm This 5-axis Sodick SL400Q wire EDM machine was manufactured in 2014, featuring a 400 x 300 x 230mm work envelope and U/V axes of 90mm each. If you are looking to get high quality EDM capabilities consider the Sodick SL400Q machine we have for sale. Contact us for more information. Application Types EDM

Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm Y working area max.: 1270 mm Control: Bosch Type 3 Basic Standard equipment: - Robust C-frame - Safety light barriers - Coordinate guide with integrated linear magazine - 2 clamping claws - Automatic tool changer - Automatic repositioning - Tool length compensation - Forming capability - Mono tool holder with 360° rotation for all tools - Programmable hold-down device - Multitool drive - Punch slug extraction - Brush tables - Part chute 200 x 200 mm, sorting of parts into 2 containers - NC-controlled, digital, maintenance-free three-phase drives - Network interface RJ34 - 3.5" floppy disk drive Crodpfx Adsxxbdledsk - TOPS 2000 graphical programming - Online diagnostics via modem - Operating manual + Vibration-damped installation + Multitool + Thread forming + Start post

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, High-precision wire EDM machine at a special price! Csdjxx Tgxepfx Addork AGIECUT Excellence 2 Year of manufacture: 2003 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without tank): 200/450 kg Best achievable surface finish: 0.1 µm Ra Maximum cutting rate in cylindrical cut: 300 mm²/min Available wire diameters: 0.10 - 0.33 mm Including AGIE universal clamping frame Including AGIE Jogger handbox Including console with 4x USB ports Including AGIE-Setup 3D The machine has been cleaned, overhauled, and thoroughly tested by our technicians. We are also happy to offer commissioning and training on request.

Year of construction: 2013, condition: ready for operation (used), General Data Machine weight 3500 kg Control Unit Brand MITSUBISHI Main Drive Number of axis 3 Movement X-Axis Movement 600 mm Y-Axis Movement 400 nmm Z-Axis Movement 310 mm Workpiece Workpiece X 820 mm Workpiece Y 305 mm Workpiece Z 1050 mm Workpiece weight 1500 kg Additional Equipment Cjdpfsxvty Hsx Addjrk Wire diameter: 0.1 – 0.3 mm This 3-axis Mitsubishi Electric MV2400R wire EDM machine was manufactured in 2013. It features a PC-based control unit with a 15" LCD touchscreen, supporting 2D/3D CAM and graphics verification. Capable of handling workpieces up to 1050 x 820 x 305 mm and 1500 kg, it offers a machining travel of 600 x 400 x 310 mm. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi Electric MV2400R machine we have for sale. Contact us for more information. Application Types EDM

Year of construction: 2002, condition: ready for operation (used), Main Drive Number of axis 5 Min. Wire Diameter 0.1 mm Max. Wire Diameter 0.35 mm Movement Crjdpfxox A I Hze Addok X-Axis Movement 530 mm Z-Axis Movement 400 mm Y-Axis Movement 350 mm This 5-axis ONA KE350 wire EDM machine was manufactured in 2002. It features X/Y/Z travels of 530 × 350 × 400 mm and U/V travels of 140 × 140 mm, supporting a maximum workpiece size of 1050 × 800 × 400 mm and weight up to 3000 kg. It includes high-precision closed diamond guides and capabilities for automatic wire threading and water temperature control. Consider the opportunity to buy this ONA KE350 wire EDM machine. Contact us for more information. Application Types EDM

Year of construction: 2007, condition: ready for operation (used), This Sodick AQ537L was manufactured in 2007. It operates optimally between 20°C and 25°C ambient temperatures, with a full load current of 43 A and a rated capacity of 15 kVA. It requires a supply voltage of 200 V and is designed for three-phase power. Contact us for more information about this machine. Application Types EDM Crsdpfsxwqvzox Addek