Used Dosing for sale (1,142)

Condition: used, Year of construction: 2017, Ser.-No. 138524-100, Control unit: Type Unilog B8, Clamping force: 1,100 kN, Tie bar clearance: 470 x 420 mm, Mould installation height: 200 - 450 mm, Opening stroke: 380 mm, Maximum platen distance: 830 mm, Ejector stroke (hydraulic/electric): 140/125 mm, Ejector force: 25 kN, Dry cycle time: 1.5 s per 294 mm, Maximum mould weight: 1,000 kg, Minimum mould dimension: 296 x 296 mm. Injection unit: Type 350, Screw diameter: 25 mm, Screw stroke: 175 mm, Screw L/D ratio: 22, 1 hydraulic core pull, Calculated shot volume: 85.9 - 220 cm³, Specific injection pressure: 1,595 - 3,000 bar, Maximum screw speed: 350 rpm, Screw torque: 340 - 500 Nm, Nozzle stroke/nozzle force: 250 mm/40 kN. Dosing unit: Manufacturer Movacolor. Injection/dosing unit: Manufacturer Wittmann, Type Feedmax S3-NET, Year 2017. Sprue picker/robot: Manufacturer Wittmann, Type WP80, Year 2018, Travel axes X/Y/Z: 100 x 550 mm x 90°, Compressed air hose reel: Manufacturer Metabo, Type SA250, L 25 m. Machine weight: 4,800 kg, Operating hours: 42,853. Njdpfeyc Sqxsx Aa Dowb This item is part of an online auction Sale is subject to the approval of the client.

Condition: used, Year of construction: 2017, Serial no. 138522-100, control system type Unilog B8, clamping force 1,100 kN, tie bar clearance 470 x 420 mm, mould installation height 200 - 450 mm, opening stroke 380 mm, max. platen distance 830 mm, ejector stroke hydraulic/electric 140/125 mm, ejector force 25 kN, dry cycle time 1.5 s per 294 mm, max. mould weight 1,000 kg, minimum mould size 296 x 296 mm, injection unit type 750, screw diameter 35 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, theoretical shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2021, travel paths X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 5,200 kg, operating hours 36,180. This item is part of an online auction. Final acceptance subject to the approval of the seller. Nedpfxeyc Snke Aa Dowb

Condition: used, Year of construction: 2017, Serial No. 138264-100, control system type Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, maximum platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, maximum mould weight 1,800 kg, minimum mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, theoretical shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, maximum screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 46,038. Nodpfx Aeyc Sh Dja Dswb This item is part of an online auction. The sale is subject to the approval of the seller.

Condition: used, Used foaming mixer by Kinematica AG (CH) type MEGATRON FM 19-120/2 LR-P. Machine has working output in range from 40-200 l/h, depending on product. Maximal viscosity of product up to 10000 mPa*s. Foaming head is equipped with heating/cooling jacket and can work at pressure up to 23 bar and temperature up to 90C. Rotor works with adjustable rotation - in range from 375 up to 750 rpm. Main drive power consumption - 11 kW. Contact parts with product designed in stainless steel AISI 316L. Mixer is equipped with integrated lobe pump by Tri-Clover/Tri-Clamp, driven by el. motor with power 0.75 kW. Working pressure up to 23 bar. Maximal rotation of lobes - up to 370 rpm. Gase feeding system - dosing air/N2 - at pressure up to 25 bar, temperature up 20C, flow range - 0.5 to 15 ln/min. Machine is mounted on mobile stainless steel frame with local control panel. Last time used in food production. Nwsdpex Tidrofx Aa Dsb

Year of construction: 2000, operating hours: 80,000 h, condition: used, machine/vehicle number: PX17, Technical Specifications & Performance DataThis Krones premix mixer is a robust processing unit designed for beverage production lines requiring reliable, high-throughput syrup and water mixing. Manufactured in 2000, it offers industrial performance and quality consistent with Krones engineering. The system is suitable for integration upstream of filling and carbonation stages within used bottling line environments and broader industrial packaging applications.Manufacturer: KronesYear: 2000Production capacity: up to 45,000 L/hElectrical rating: 230/400 V, 3~Frequency: 50 HzRated current: 87 AAllowable operating overpressure: up to 3.5 bar (vessel rating)Certification: CE marking; manufactured under ISO 9001 quality managementAdvanced Automation & Control SystemsThe premix system is configured for stable, repeatable mixing performance with industrial-grade electrical components. The three-phase power configuration at 230/400 V and 50 Hz supports dependable operation across beverage processing shifts. Safety and compliance are supported by CE marking and ISO 9001 manufacturing standards. The unit’s control architecture is suitable for integration with line-level PLC/HMI systems commonly used in beverage production.Three-phase 3~ electrical systemRated current 87 A for robust process dutyCE-compliant safety and quality designEngineered for consistent ratio control and process stabilityProduction Line Integration CapabilitiesEngineered for inline use, this premix mixer integrates seamlessly with upstream syrup room equipment and downstream carbonators, fillers, and packaging machinery. It supports second hand and retrofit projects, enhancing capacity and process stability in existing beverage production layouts. The system fits PET or glass bottle lines as part of a complete packaging chain, from processing to filling, labeling, and capping.Inline or standalone operation within beverage processingIdeal interface to carbonators and filling machinesSupports industrial packaging workflows in used bottling line upgradesFlexible adaptation for PET and glass bottling linesMachine Condition & Maintenance HistoryThe machine is installed under power and available for quick sale. It is not currently in active production and will require dismantling for removal and relocation. Operating hours are approximately 80,000, consistent with a well-maintained industrial processing unit of this class.Under power, not currently in productionApprox. 80,000 operating hoursAvailable for prompt sale and dismantlingOperational Performance & VersatilityDesigned for beverage production, the Krones premix mixer provides accurate blending of water and syrup for a wide spectrum of products. Its vessel overpressure rating up to 3.5 bar supports stable operation in line environments that may feed carbonation steps and high-speed filling. This makes it a strong fit for producers aiming to boost throughput, stabilize quality, and modernize existing second hand bottling equipment setups.High-throughput mixing up to 45,000 L/hSuitable for still and carbonated beverage processing workflowsConsistent dosing and mi... Nwedeycvuujpfx Aa Dsb

Condition: excellent (used), Eos EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The machine has been serviced regularly (last service: 08/2024). It has exclusively processed PA11 (EOS PA1101). The system is offered including accessories: 1 x build box, docking station, multibox with cooler Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been thoroughly inspected." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set: PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. charge: 420 g) Multibox is a typical EOS accessory for powder handling, used for transporting and interim storage of material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): Travel 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Take-off chamber heating: 1.6 kW, resistance heater coil with separate temperature measurement Control & Operation: Process computer with Windows 7 OS 15.1" TFT display, membrane keypad & mouse Ethernet network connection Nwedpfx Aaoxw Uyqo Dsb Other: Noise emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Line protection: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see picture) Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Specifications and information are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 230 bar, empty load weight: 67 kg, input voltage: 400 V, fuel: electricity, warranty duration: 6 months, KARCHER HD 10/23-4S COLD WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and adjustable nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 230 bar and 1000 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply: 3 phase - 400 V - 50 Hz Discharge capacity (l/h): 1000 Operating pressure (bar): 230 Maximum pressure (bar): 253 Connected power (kW): 7.8 Weight (kg): 67 Dimensions (L x W x H) (mm): 560 x 500 x 1090 Hose length (m): 10 EQUIPMENT: NEW durable pressure gun from the German brand R+M Nsdpfx Aaoydpx Ne Dewb NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW adjustable nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: used, Year of construction: 2008, Overview  The following 2 component mixer was built in 2008 by the German manufacturer Famix. The machine is available immediately in its current condition.  Technical details  Capacity: max. 30,000 l/h 2-component mixer  Dimensions (LxWxH): 3,200mm x 1700mm x 2700mm   Flow meter  Dosing pump  Vacuum degassing  Brix measurement  CO2 regulation CO2 pressure control  Conductivity measurement   Electrical data  Operating voltage 400V/230 V 50 Hz, 80A  SIEMENS S7-300 Nodpfx Asxb Akrsa Djwb

Condition: used, Year of construction: 2007, Overview The Enoveneta TOP 15 is a grape de-stemming and crushing machine specially developed for use in wine production. It offers a capacity of 15-16 tons per hour and has a robust design made of AISI 304 stainless steel. The machine has been offered for sale due to non-use by the owner and is in good condition. Technical details  Capacity: 15-16 tons/hour Energy supply: Standard voltage 400/3/50 Motor power: Stalk remover: 2.2 kW Motorized auger: 0.55 kW Weight: 300 kg Dimensions: Length: 2,700 mm Width: 1,000 mm Height: 1,500 mm AISI 304 stainless steel frame on castors Perforated cylinder made of AISI 304 stainless steel with holes in sizes 25/22, 22/22, or 22/18 Functions  De-stemming: separation of the grapes from the stems through a perforated cylinder Crushing: Adjustable beater bar for gentle processing Removable beater bar and cylinder for easy cleaning Juice extraction: Integrated juice extraction system Speed control: Variator for dosing auger and stalk remover Accessories Open lid with removable whipping boom and cylinder Electric control panel Nodpfsu Tyzqjx Aa Djwb

Condition: used, Year of construction: 2004, Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data Capacity: up to 20,000 bph Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB Application: Water, CSD, or other beverages in returnable glass bottles Condition: Line in good condition Availability: Immediate Status: Still installed and connected   Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2,000 crates/hour | 1997 | GDB crates, stainless steel Bottle washer | Klinger | 1993 | Stainless steel, multi-zone, steam extraction, dosing system Empty bottle inspector | Krones | up to 50,000 bottles/hour | 2004 | Linatronic system Filler | Nate-Veral 60 | 20,000 bottles/hour | 2004 | glass bottles, without closer Capper | Datz | 20,000 bottles/hour | 2004 | 8-head Solo SV, left–right working direction Swing-top capper | Datz | 20,000 bottles/hour | 2004 | 24-head BVM-24R, swing-top closure Labeller | Krones | up to 20,000 bottles/hour | 2004 | Prontomatic, 2 stations, Checkmat inspection Crater | Otto Fleischer | 1993 | ROTA 1 E, automatic case packer Nwedpfoyb R Uasx Aa Djb

Condition: used, Year of construction: 1993, Overview This Klinger BC 16/1 bottle washer was manufactured in 1993 by the german manufacturer Klinger and is designed for cleaning returnable glass bottles. The machine is made entirely of stainless steel and equipped with modern cleaning, dosing, and control features ensuring reliable operation and excellent hygiene results. The washer is in good working condition. Suitable for multiple glass bottle formats used in beverage filling lines. Technical Data Manufacturer: Klinger Type: BC 16/1 Year of manufacture: 1993 Application: Returnable glass bottles Material: Full stainless-steel construction capacity: 20.000 bottles/h Features Complete stainless-steel construction Steam extraction system Finger infeed and finger discharge Chemical dosing system Rotating spray pipe system Lauer control panel Conductivity measurement Stainless-steel filter inserts Plate heat exchanger Compatible with standard bottle formats Nsdpfxeyb Sxaj Aa Dewb

Condition: used, Year of construction: 1999, Overview  This KHS filling monobloc was manufactured in 1999. The filling monobloc is still in production until the end of October and can be viewed in person. The special feature of the filler is that it can process carbonated or still mineral water with natural flavors using a micro-dosing unit. It also includes an accumulation table. Technical data  Rinser, Isobarometric Filler, Capper Monobloc | KHS, Zalkin | VK-E 40/50/10/S PET | 1999 (low working hours) Filling carbonated mineral water and also carbonated mineral water with natural flavours Processing: PET bottles 1,25L & 0.50L cylindrical petaloid base Bottle neck: PCO28 1881 Current capacity: 23.400 bph Number of rinsing nozzles (KHS Innoclean): 40 Number of filling valves (KHS Innofill): 50 Number of capping stations (Zalkin): 16 Including also micro-dosing unit Perrier for natural flavours With caps magazine & elevator Accumulation table Gebo Sidel type AQ file Dynamic accumulation and buffer between the filler outlet and the labeller inlet, avoids untimely stops upstream (filler, blow-moulder) due to the labeller Nwodpswvl Dgsfx Aa Dob

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Capacity: 9,500 bph Cell Pitch: 95 mm Bottles per row: 25 Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg YOM 2024 Formats: 0,25l 0,33l 0,5l 0,75l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Nwjdpfxevrfivj Aa Dob

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 36,000 bph at 1.5L water 35,000 bph at 1.5L soft drinks (sweet) 32,000 bph at 1.5L soft drinks (light) Formats: 0.5L and 1.5L bottles PCO 28-1881 closure Filling product: Water and carbonated soft drinks (7.5g CO₂) Closure system: Screw caps, fed via chute and tipper (Zalkin + NSM) Packing: Shrink pack: 3x2 bottles (double lane) Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Electrical specs: 400 V / 50 Hz Control systems: ABB, Siemens Operating direction: Standard Scope of Delivery  Blow moulder: SIG Corpoplast Blomax 24, year 2008 24 stations, heating oven with 20 boxes, ABB control Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK Air conveyor: NTS Mistral, year 2000 Pneumatic adjustable rails, basket cable tray Filler: KHS Innofill EV-VF, year 2000 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version Inspection & Coding: Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 Bottle laser coding: Videojet with housing Pack inspection: KHS Innocheck CUB, year 2015 Packing machine: Kisters SP060V, year 2000 Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only Conveyors & Pack labelling: Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication Pack conveyor: Paxona + Schaefer, year 2009 Pack labelling: Contact 100, self-adhesive label from reel Nwodpewh U Avofx Aa Dob

Condition: used, Year of construction: 2022, Overview This continously crate washer, type: Nowicki MPP-150P was built in 2022 in EU.  for washing E1, E2, E3 crates with a maximum size of 600 x 460 x 420 (length x width x height). Water heating system: steam Also suitable for the bowls and GN 1/1 containers. Stainless steel construction Width (adjustable) min. : 200 mm / min. height: 50 mm Closed water circulation with filter Automatic dosing pump High-pressure nozzles adjustable in angle Display Regulation and control of temperature up to +65 C  On/Off Pump Automatic/ Manual mode Setting time and date Nozzle pressure adjustment: up to 4.5 bar Service Mode Water-resistant, IP 67 Technical Details Capacity: max.150 crates/ hour Height: 1820mm Width: 1057mm Length: 2629mm Scope of delivery continously crate washer | Nowicki | MPP-150P | 2022 Njdovnl T Hjpfx Aa Dewb

Condition: used, Year of construction: 1999, Overview The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported.  Tech Specs: Capacity: 6,700 bph Cell Pitch: 102 mm Bottles per row: 10 Dimensions + Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg YOM 1999 Formats: 0,33l 0,5l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Nwjdpswg E D Isfx Aa Dsb

Condition: used, Year of construction: 2016, Overview  This weighing and packaging line was built in 2016 by the Spanish manufacturer Volpak. The system is fully equipped, in very good technical condition and shows only minor wear. The system is still installed and connected and can therefore be viewed in person at any time. Technical details Output: 60 bags/minute Doypack/flat bag formats: 20/25g, 50g, 300g, 500g, 750g Possibility of micro-dosing powders Modern wide zipper/belt Scope of delivery  Doypack packaging machine | Volpak | SI-280 F1 Multi-head weigher | Ishida | CCW-RV-228-S/05-SS 4 raw material unloading stations Lindor mixer Cox & Plant feeder between the unloading stations and the mixer and multihead weigher Ishida X-ray unit with recoil, IX-GA-4075 Ishida dynamic check weigher with DACS-G-S0 recoil Installation for the injection of nitrogen or another inert gas, together with a measuring system Dust extraction system Euro slot Smooth welding system Nwsdpstz H T Dsfx Aa Djb

Condition: used, Year of construction: 2024, Overview:  The ALWID KRONE-D is a semi automatic dosing filler. The machine is suitable for volumetric filling of not carbonated liquids (low viscosity up to high viscosity) for the pharmaceutical, chemical and food industry. Procedure: The ALWID KRONE-D is a semi automatic machine. The operator places the bottles on the height-adjustable worktable manually and presses the START switch at each filling valve. That way, also single bottles can be filled. As soon as the START switch has been activated, the filling valve moves down and opens. The bottle is filled. Then the filling valve closes and automatically moves up, when the adjusted volume has been reached. Now the filled bottle can be machine can be used for several different liquids, bottle shapes and bottle sizes without requiring additional format parts. As the construction is solid and clear, the format change only needs a short time. The filling volume is easily and quickly adjustable by changeable volume-adjustment rods. Immersed filling is possible, when foaming products are to be filled. The machine is movable. Technical data: number of filling stations: 2, expandable to 4 diameter of filling valve:  filling volume: 100-1000 ml  machine made of: stainless steel product touching parts stainless steel, glass and plastic pneumatic connection:: R 1/2“ / 6 bar electric connection: not needed   Nwsdpfxexb Umrj Aa Dsb

Condition: used, Year of construction: 1999, Overview This SIDEL blow moulder and KHS filling monobloc were both manufactured in 1999. They are still in production until the end of October and can be viewed in person. The special feature of the filler is that it can process carbonated or still mineral water with natural flavors using a micro-dosing unit. The filler (KHS Innofill monobloc) and accumulation table (Sidel AQ) are also available without the blow molder (Sidel SBO 18 Series 2), price on request.  Technical Details Blow moulder | SIDEL | SBO 18 Series 2 | 1999 Current capacity: 23.400 bph in 1.25L Working hours: 40.000            Number of moulds: 18      Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:            Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control Lanfranchi bottles buffer storage silo            Unscrambler and air conveyor system with drive to the entry KHS monobloc Supplied with all format & spare parts available Rinser, Isobarometric Filler, Capper Monobloc | KHS, Zalkin | VK-E 40/50/10/S PET | 1999 (low working hours) Filling carbonated mineral water and also carbonated mineral water with natural flavours Processing: PET bottles 1,25L & 0.50L cylindrical petaloid base Bottle neck: PCO28 1881 Current capacity: 23.400 bph Number of rinsing nozzles (KHS Innoclean): 40 Number of filling valves (KHS Innofill): 50 Number of capping stations (Zalkin): 16 Including also micro-dosing unit Perrier for natural flavours With caps magazine & elevator Accumulation table Gebo Sidel type AQ file Dynamic accumulation and buffer between the filler outlet and the labeller inlet, avoids untimely stops upstream (filler, blow-moulder) due to the labeller Nsdpferqar Sjx Aa Dewb

Condition: used, Year of construction: 2022, Overview  The filling machine Flowmeters 8 was built in 2022 by Polish manufacturer Perunpack. The machine was only tested, is still under power and can be viewed in person at any time.  Technical Details  Capacity: 800-1000 bottles per hour for the 5 l format Machine can fill containers from 150 ml to 6000 ml. Number of filling stations: 8  Diameter of fillers: 16 mm Machine can fill thick products and typical water  Measurement system is based on Keyence flow meters, special flow meters for dosing machines Machine is equipped with a pump with an elastic rotor that doses the medium into a pressure tank and then onto the fillers. Entire machine is made of 304 stainless steel Siemens control system. Filling from the bottom of the container. Lowering and raising the boom with fillers using a servomotor    Nwjdpferziuyox Aa Djb

Condition: used, Year of construction: 1997, Overview   The filling line for cups was built by HAMBA in 1997, is still in operation until the end of 2024 and can be inspected at any time.   Technical data Output: 20 - 40 cycles/min   Products that can be packed:   Liquid yoghurt milk, 0.3 to 4% fat (20-45°C)   Stirred yoghurt with fruit, max. edge length of fruit pieces 15mm, 0.3 to 4% fat (3-10°C)  Cream, 25 to 35% fat (3-42°C)  Salad dressings with salt, herbs and vinegar  Pudding, sweet (2-70°C)  Cup formats:  Cup diameter: 75 mm   Max. Height 120 mm   Filling ranges:   50 ccm to 250 ccm filler with fruit dosing  30 ccm to 150 ccm filler with fruit dosing  Closure: sealing lid   Control Siemens S7   Scope of delivery  Filling machine | HAMBA | BK 8008 A | 1997  Tray erector | Schäfer and Flottmann | SFS 337 | 1997  Empty crate conveyor | Manex | - | 1997  Packer | AF | - | 1997  Integrated in SIG HAMBA BK 8008 P system  Good maintenance condition  Full crate conveyor | Manex | - | 1997  Layer palletizer | Manex | - | 1997 (revision 2004)  Nedpfx Aot Uw E Dja Dowb

Condition: used, Year of construction: 1996, Overview  This Krones Lavatec KES-2-5-312/25-110 bottle washer was manufactured in 1996 and has an output of 29,000 bottles per hour. The machine has been modernized several times, including an S7 control system, caustic filtration with drum screen and pH value measurement for hot water 1. The machine will run until the end of January 2026 and can be inspected in person at any time until then. Technical details  Output: 29,000 bottles/hour Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Equipment & modernizations  Plastic cell with 110 pitch Suitable for swing-top bottles Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Modernizations: Retrofitted S7 control system Drum screen for caustic filtration Railing on the machine Hanger-specific caustic spraying in the deflector Cleaning & heating system: Rental rotating spraying Heating with tube bundle exchanger and hot water Lye concentration measurement and dosing control, also for post-caustic pH value measurement for hot water 1 Soaking & rinsing system: Double pre-soak with sieve belt Lye volume: 30 m³ Caustic solution, hot water 1, hot water 2, cold water and fresh water Head section can be steamed and rinsed with disinfection H₂ suction Nodpfjvxtavox Aa Dswb

Condition: used, Year of construction: 2020, Overview This filling machine from the German manufacturer ALWID is equipped with 8 filling heads and is specifically designed for filling small-volume bottles (100 ml). Precise dosing is achieved using mass flow meters (Coriolis principle) from the reputable manufacturer Endress+Hauser, ensuring high accuracy and repeatability. Technical Specifications: Manufacturer: ALWID Number of filling heads: 8 capacity: 8.000 - 10.000 /h working direction: right-left Filling volume: Designed for 100 ml (other volumes may be adjustable) Dosing system: Mass flow meters by Endress+Hauser Typical application: Low- to medium-viscosity liquids Key Features: Hygienic design for easy cleaning (CIP) Suitable for pharmaceuticals, cosmetics, food, or chemicals High filling accuracy thanks to mass flow technology adjustable filling lance movement Njdpfx Aoxb Umfoa Dowb

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Nwedpfsl Hx Adjx Aa Dob

Condition: used, Year of construction: 1993, Overview  The following 6 component mixer was built in 1993 by the German manufacturer Famix. The mixer can be offered completely overhauled and with warranty. The machine is available immediately in its current condition.  Technical details  Capacity: max. 30,000 l/h beverage   6-component mixer  Dimensions (LxWxH): 3,200mm x 1750mm x 2800mm   Flow meter  Dosing pump  Vacuum degassing  Brix measurement  CO2 measurement  CO2 pressure control  Conductivity measurement   Electrical data  Operating voltage 400V/230 V 50 Hz  Control voltage 42V AC  Nsdpfjvcp U Rex Aa Dewb