Used Drawbar for sale (1,375)

Condition: used, maximum load weight: 14,225 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2019, loading space length: 6,611 mm, loading space height: 4,000 mm, total width: 8,511 mm, total height: 2,550 mm, Equipment: ABS, DOLL - 2-axle short timber trailer in "stool design" type A2G-10L500 (A131) Technical data: Dimensions: Total trailer length: 8,511 mm (with drawbar length 1,900 mm) Loading length: 6,611 mm Front overhang: 760 mm Rear overhang: 856 mm Vehicle width: 2,550 mm Wheelbase: 4,995 mm Load height top edge of frame loaded: 1,187 mm (with 275/70 R 22.5 tires) Overall height: max. 4,000 mm Weights: Perm. total weight: 18,000 kg Axle load (2 x 9t): 18,000 kg (techn. 24,000 kg) Unladen weight approx.: 3,350 kg (without stools and stanchions) Payload approx.: 14,650 kg Cedpfoxzurhox Addork Basic equipment:A2G DOLL - 2-axle short timber trailer in "stool design" - straight top chord Sturdy welded construction consisting of 2 longitudinal beams with straight upper chord. - Bogie with ball bearing rim - 1 wheel chock with bracket - Side underrun protection in accordance with ECE?R 737254461 Rear underrun protection: Aluminum underride guard, in accordance with ECE?R 58 Complete lighting and license plate holder installed in a protected manner, in accordance with ECE?R 487227407 Wheel cover: Complete plastic mudguards over the wheels, attached to the bogie at the front and to the main frame at the rear, with DOLL mud flaps behind the axles. Frame cover: Full-length aluminum duet plate cover (3/5 mm) bolted between the upper chords.7206867 Drawbar GZY27: Drawbar fork with silent bushing bearings and drawbar support, type GZY 27drawbar eye: Length: D-value: Maximum front axle load: Maximum total weight:Ø 50 mm (heavy-duty ECE) 1,900 mm 125 kN 10 t 27 t Connecting cable to the truck: routed along the drawbar (air, light, ABS). Cable routing: Brake and electrical cables routed protected on the main frame. Grapple bracket: Angled grapple bracket at the front, reinforced. Mud flap: Continuous mud flap at the end of the vehicle, swinging, with ?DOLL? log Chassis / Chassis:12 t Chassis: 2 single axles, BPW, 12 t with drum brakes, both axles with ABS and AGS, including safety ropes. Suspension type SL, with 2 x 43 mm trailing arms. Air suspension: Air suspension without lifting and lowering. Weight display without Smartboard: EBS-E weight display for trailers with air suspension, consisting of 2 pressure sensors to determine the axle loads. The axle loads are transmitted to the truck via CAN-BUS for weight display in the truck display. (Truck equipment not included in the scope of delivery!) Brake system: Electronically controlled 2-line air brake system (EBS-E). Brand name, load-dependent, including ABS. EBS system completely installed, spring-loaded parking brake, can be operated via parking release safety valve, as well as from the cab (truck-side installation not included in scope of delivery!) Aluminum air tank Brake connection: 1 duomatic clutch head. Tires: Tires (85.50 kg / piece): 8 pieces tires 275/70 R 22.5 make Continental Hybrid HS3 on steel rim 8.25 x 22.5. Stools / stanchions: Stool: 6 pieces ECCO? steel stool body with 2° stanchion inclination type Kombi 7 (80.0 kg), with bracket ? Clamp fastening on the main frame including 1 pair of hooks for load securing. Stanchions: ECCO aluminum stanchions type ALU 7, screwable, fixed dimension stanchions. Basic height 2,550 mm (21.0 kg). Maximum loading capacity per pair of stanchions 7t. Electrical equipment / lighting: Lighting system: Conventional wiring of the trailer to increase the quality standard. ? Long service life ? Insensitive to moisture and dirt ? Minimal maintenance ? Quick and easy repair in rare serv

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Crsdjw Hxuajpfx Addsk Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: new, empty load weight: 3,600 kg, maximum load weight: 10,300 kg, overall weight: 13,900 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 205/65 R 17,5, color: other, gearing type: other, front tire size: 205/65 R 17,5, rear tire size: 205/65 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Drawbar extendable to approx. 3,850 mm, locking positions at approx. 1,000 mm, 2,000 mm, 3,000 mm or 3,850 mm; loaded floor height approx. 800 mm; internal vehicle width approx. 2,530 mm; centrally, 4 stake pockets for 100 x 50 mm plug-in stakes; 8 stake pockets in the outer frame; 4 lashing rings, each rated at 5.3 t; outer frame with lashing eyes; 4 warning panels with lighting; rear plug-in rotating beacon; contour marking and side underrun protection; rear mudguards and spray suppression. -- Subject to printing errors, mistakes and changes; sample images. -- More data at: !, More Details: ! Cedexupqrjpfx Addork

Condition: ready for operation (used), Year of construction: 2008, operating hours: 90,000 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, controller model: Fanuc Series 16i MB, spindle speed (max.): 30,000 rpm, In recent years, more than €50,000 has been invested in the machine – the following components have been replaced/repaired, among others: Main spindle - tool holder Spindle drawbar Tool change gearbox Ball screws for X/Y/Z/U axis Motor for Z-axis Motor for U-axis TECHNICAL DETAILS Travel X: 250 mm Travel Y: 200 mm Travel Z: 300 mm Max. workpiece diameter: 32 mm Spindle speed: max. 30,000 rpm Spindle interface: HSK-E40 Tool changer: 48 positions Axes: 5 + gripper Crodpfx Adexuphqjdjk MACHINE DETAILS Control: Fanuc Series 16i MB Operating hours: approx. 75,000 h EQUIPMENT Bar loader LNS Hydrobar Express 332 Coolant filtration system Internal coolant supply (IKZ) Spindle cooling Note: The machine is offered without tool holders and collet chucks.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, Universal Milling Machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis digital readout Heidenhain ND 780 — As new condition! Technical specifications: >> Machine No. 55249/08, year 2010 >> Fixed angle table >> Spindle speed: 40–2000 rpm Csdpfxjxu Hbhs Addork >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories & features: >> 3-axis digital readout Heidenhain ND 780 >> Hydraulic vice >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant system About the machine: For sale is a Universal Milling Machine Deckel FP1, repowered by FPS, in like-new condition. Included in the scope of delivery are the hydraulic vice with rotary base, collets, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the Deckel on site under power. The machine is available immediately.

Condition: used, functionality: fully functional, Year of construction: 2022, load capacity: 1,400 kg, lifting height: 4,105 mm, free lift: 1,418 mm, mast type: triplex, construction height: 1,950 mm, fork carriage width: 570 mm, fork length: 1,150 mm, construction width: 770 mm, High lift truck Load centre of gravity: 600 Credpfx Aowqtyxsddjk Mast type: Triplex Technical condition: New Front tyres type: Polyurethane Rear tyres type: Polyurethane Battery voltage: 24V Battery year of manufacture: 2024 - BT Powerdrive - Liftable support arms (initial lift) - Electronic fingertip buttons - Electronic regenerative braking - Electronic speed control - Operator safety - Storage compartments - Automatic shutdown - Crawl function with vertical drawbar `Click-2-Creep` - Programmable performance parameters - Easy access for maintenance work Your individual equipment: - Drawbar: pedestrian - Finger protection Plexiglas - Battery compartment medium with plastic battery compartment cover

Condition: used, maximum load weight: 2,641 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 09/2025, Year of construction: 2025, Henra MT 353517 Machine Transporter for Construction Equipment, etc. - New New, immediately available from stock Perm. gross weight: 3,500 kg Transport platform: 3,500 x 1,700 mm Standard equipment includes: * Bolted tubular drawbar with two different heights for coupling brake installation * Lashing eyes recessed in the V-grooves of the loading platform * Very low loading floor for easy drive-on and off * 115 cm long loading ramp with robust access aid and adjustable spring system * Loading ramp fitted with a solid and practical rotary lock (prevents tailgate rattling) * Heavy-duty bucket holder, which also serves as a spare wheel mount * Built-in LED side marker lights in the side rail * LED front lights and LED contour lights * Closed front with tubular frame * Heavy-duty 18 mm plywood/timber floor with anti-slip surface * 185/60R12 wheels * 100 km/h type approval Crsdexzuqkopfx Addsk Despite the utmost care, errors in this advertisement cannot be ruled out. Subject to errors and prior sale!

Condition: used, Year of construction: 2020, carrying capacity 20000 kg 6000 mm efective widths 2500 mm height 850 mm weight ca. 2700 kg size of tire ca. 559 x 305 mm Total Dimension ca. 8100 x 2500 x 850 mm Like new condition, used only once. The wooden cover was damaged during initial use due to excessive point load. The heavy-duty trolley is sold without the wooden cover. Heavy-duty trailer with double swivel steering - Small turning circle - Tilt-proof thanks to steering angle limiter - Robust, low maintenance - Reversible drawbar Credpfx Asxu Nwroddek Solid wood decking, 60 mm thick, weatherproofed (original decking was 30 mm thick) available at extra cost (for self-assembly)

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, rear stanchions can be plugged in, geared support winch with load and fast gear, front, mounting shaft for two aluminum drive-on ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , -- Misprints, errors and omissions excepted, sample images --, More data under: !, More Details: ! Csdpfxoxghvks Addork

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 6,000 mm, Year of construction: 2025, total width: 2,550 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 500 8x4 Crane F710 RA2.27 with jib and winch Tractor Unit Immediately Available Removable flatbed with side panels 4400x2500x600 mm Fifth wheel coupling Volvo: - New model - FH sleeper cab - Wheelbase: 4600 mm - Exhaust emissions according to Euro 6 Step E with SCR, particulate filter, and EGR - Diesel engine, 12.8 L, 510 HP / 375 kW, 2,550 Nm - Volvo Engine Brake+ (VEB+), braking power 510 HP / 375 kW (D13K) - ADR brake regulations compliant - I-Shift AT2612F, automated 12-speed gearbox (direct drive), max input torque: 2,652 Nm - Rear axle RSS1370A, single reduction, 13 t axle load, GCWR 70 t - AA tires 315/70R22.5 - Drive axle ratio 2.85:1 - Diesel fuel tank - Driver comfort package - Air conditioning with automatic temperature control and sun sensor - Info and media package with navigation - Radio: AM/FM - USB ports, triple - 8 speakers - High instruments: digital driver info display, 12'' with 4 views - Second driver info display, 9'' - Navigation system: TOMTO - AGM batteries, 2 x 210 Ah - Battery display (volts, amperes, battery status with warning function) - Main battery switch on chassis - 330 L aluminum tank right, D-shape, 710 mm high, 830 mm long - Fuel tank, standard ground clearance - AdBlue tank left, usable volume 64 liters - Lockable tank cap - Spill-proof tank filler - Rear exhaust - 2 foldable wheel chocks, transport mounting - Marker lights rear and side - Trailer crossmember with D-value = 190 kN for G-150/G-260 hole pattern - Trailer crossmember to frame end 85 mm - Rear frame length 4395 mm, measured from drive axle/first drive axle - Rockinger 400 G-150 drawbar coupling (observe D-value/max. trailer load!) - Electrical connection for semi-trailer/trailer, 15-pin - Trailer/semi-trailer Duomatic connection - Central trailer connections - Stationary trailer brake (active up to 7 km/h) - Rear underrun protection, aluminum, fixed, thin - 4x VA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle - 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle - 2x NLA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, trailing axle Csdpsxy T Nvsfx Adderk - Electric venting pump - Gearbox/I-Shift operation via control panel on driver's seat - I-Shift driving modes: Standard, Performance, and Economy - Autoreturn to Economy mode - No manual intervention in automatic mode, without kickdown - Cruise control - Basic gearbox oil cooler, water/oil - 2-cylinder air compressor, 1100 l/min, for vehicles/combinations with increased air demand - Front air intake with standard air filter - Alternator 150A/4200W - External noise per ECE R51.03 Phase 2, with low noise certificate and L-plate - Closed crankcase ventilation - Double fuel filter on engine, large, for poor fuel quality (e.g. Eastern Europe) - Fuel filter with water separator - PTO (medium speed PTR-DM), gearbox side, 1 DIN rear connection for pump - PTO on gearbox, max output 600 Nm - Dynamic package: Fabric seats, yl (blue/dark blue) with gray fabric interior - Driver's seat comfort, air-sprung, heated, integrated seat belt - Standard air-sprung passenger seat - Lower bunk, foldable, 2000x815/740/660 mm (middle, upper, lower) with safety net - Cab parking heater, 2 kW - Storage under bunk - Refrigerator with 33 L freezer compartment under bunk

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed, Light Grey, Excellent Condition Technical Data: >> Year of manufacture: approx. 1990, Machine no. 2102-5231 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100 mm on spindle carrier >> Vertical and horizontal quill - SK40 >> Drawbar system M16 >> Weight: approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Central electric lubrication >> Coolant system >> Operating manual, spare parts diagram About the Machine: Cjdpfx Adexu E R Iedork Offered is a Universal Milling Machine Deckel FP1 in very good condition in light grey. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. In this newer FP1 model, the feed is infinitely variable in all three axes; in addition, rapid traverse is available in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain positioning control, you can input dimensions that the machine will automatically move to. The FP1 was previously used in a training workshop, where it was only operated occasionally. The oil has been changed. Mechanically and electrically inspected. The Heidenhain digital readout makes working easier and even more precise. Take advantage of the opportunity to view and test this exceptional machine under power on site. The machine is available immediately.

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 3,000 kg, construction height: 1,288 mm, fork carriage width: 730 mm, fork length: 1,150 mm, empty load weight: 720 kg, construction width: 734 mm, Low lift pallet truck Cedpfxovyvvpo Adderk Load centre: 600 Technical condition: New Front tyres type: Polyurethane Rear tyres type: Polyurethane Battery voltage: 24V Battery condition: NEW CE certificate Lift height: 120 mm Drawbar height max/min: 1288 / 1075 mm Ground clearance at wheelbase centre: 0 mm

Condition: used, maximum load weight: 2,840 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 10/2023, Year of construction: 2023, Baos M353616 Full-Aluminum Construction Machinery Trailer / Machinery Transporter Codpfexzur Usx Adderk Car Trailer 3,500 kg Condition: as new (Year of manufacture: 2023) Demonstration unit TÜV inspection: new Immediately available Technical specifications: Permissible total weight: 3,500 kg Unladen weight: approx. 660 kg Payload: approx. 2,840 kg Number of axles: 2 Loading area length: 3,550 mm Loading area width: 1,650 mm Brake type: braked, overrun brake Chassis: low-loader (wheels next to body), rubber torsion axles Electrics: 12V, 13-pin connector Tire size: 195 R14C Equipment: Heavy-duty automatic jockey wheel with strut Bucket holder Phenolic resin coated anti-slip floor plate 2x lashing points 2000 daN at the rear of the loading area 8x floor anchors 800 daN mounted laterally in the loading area 4x aluminum tie-down rings on the outer frame Automatic jockey wheel Foldable aluminum loading ramps incl. support stands Aluminum plug-in panel between aluminum loading ramps Aluminum mudguards Welded frame V-drawbar AL-KO or Knott axles and brake system 100 km/h speed approval Despite the utmost care, errors in this advertisement cannot be excluded. Subject to prior sale and errors!

Condition: used, maximum load weight: 14,850 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 02/1998, loading space length: 8,300 mm, loading space width: 2,400 mm, loading space height: 2,920 mm, loading space volume: 58 m³, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, KA-BA livestock transport body, body designed for transporting pigs and piglets, with 2nd hydraulically adjustable intermediate floor, loading area per floor: 19.80 m², interior height: 2,920 mm, double-wing door with espagnolette lock at the front, through-loading option, aluminum checker plate floor, side ventilation openings with air flaps and sliders, side loading options through flaps, drawbar length-adjustable, reversing camera, central lubrication system, ABS, EBS, BPW Eco axle(s), drum brake system, air suspension with lifting and lowering device, 2nd axle can be lifted, central lubrication system, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this property. Please contact us! Csdsvnpz Ijpfx Addsrk

Condition: used, Year of construction: 2012, operating hours: 4,500 h, CAT POWER GENERATOR/FLOODLIGHT SYSTEM Type: GEP 18 LT Generator 16.5 kVA Diesel Cedpfxewb Nhts Addsrk 4-cylinder Mast with 6 floodlights 4-point outriggers 80 km/h high-speed Hot-dip galvanized chassis Height-adjustable drawbar Ball head and jaw coupling etc...

Condition: used, Year of construction: 2018, operating hours: 10,400 h, Equipment: ABS, all wheel drive, CAT M317F (Year of manufacture ~2018) Engine & Drive * Engine: Cat C4.4 ACERT with twin turbo, 4 cylinders * Displacement: approx. 4.4 L (268.5 in³) * Power (net): approx. 112 kW / 150 HP (ISO 9249/SAE J1349) * Max. torque at 1,400 rpm: approx. 523 lb·ft (~710 Nm) * Emissions: complies with EU Stage IV / Tier 4 Final standards Travel & Drive * Maximum speed: approx. 30 km/h (~19 mph) * Drawbar pull: approx. 104 kN (23,380 lbf) * Gradeability: up to 70 % (at 17,500 kg) Dimensions & Transport Cedjw Tqgmspfx Addork * Transport length (with long boom): approx. 8.46 m (27.75 ft) * Transport height (over cab): approx. 3.15 m (10.3 ft) * Transport width (with parallel blade): approx. 2.54 m (8.33 ft) * Tail swing radius: approx. 1.85 m (5.83 ft) Weight * Operating weight: approx. 15.3 t to 17.5 t (33,730?38,580 lb), depending on specification and configuration Hydraulics & Working Ranges * Main pump flow: approx. 220 l/min (58 gal/min) * Max. pressure – working circuit: approx. 35,000 kPa (? 5,076 psi) * Swing torque: approx. 37 kN·m (27,289 ft·lbf), swing speed: approx. 9 rpm

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Digital Readout RSF Elektronik Z-530!! Technical Data: >> Year of manufacture: approx. 1975, Machine No. 0681 >> Swivel and tilting table (recently overhauled) >> Speed range: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW Csdpfjxu E I Hox Addork >> Travel X/Y/Z: 500/300/400 mm >> Features: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 >> Drawbar system M16 >> Weight approx. 1300 kg Equipment and Accessories: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Central lubrication About the machine: For sale is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are nearly new. The swivel and tilting table is as new. An oil change has been carried out. The machine has been mechanically and electrically tested. The digital readout makes work easier and more precise. Take advantage of the opportunity to inspect and test the Deckel on-site under power. The machine is immediately available!!!

Condition: new, functionality: fully functional, Year of construction: 2025, SCHORR RR200THX – Professional Wood Chipper for Branches up to 200 mm ✅ New & In Stock ✅ Shipping Available ✅ Self-Feeding The SCHORR RR200THX is a powerful drum wood chipper designed for professional use. It easily processes branches and trunk sections up to 200 mm in diameter and impresses with its robust construction, high throughput, and user-friendly operation. Equipped with a 25 HP petrol engine, this chipper delivers ample power for daily tasks in gardening, landscaping, and forestry. The electric start (e-starter) ensures comfortable and reliable startup—even in cold temperatures. The self-feeding cutting system, featuring 2 blades and 1 counter-blade made of hardened steel, guarantees a clean chipping result and consistent material flow. The large feed opening allows for quick and safe material input, even with heavily branched wood. Crsdjxu I T Eopfx Addjk The discharge chute is rotatable 360°, allowing you to direct the wood chips precisely—into piles, trailers, or big bags. Advantages - Self-feeding: No manual pushing required - E-starter: Convenient push-button starting - Robust cutting system: Hardened steel blades for long service life - Heavy-duty steel frame: Stable, torsion-resistant, and durable - 360° discharge chute: Flexible direction of chip output - Easy maintenance: Simple access to blades, filters, and oil - Mobile: Drawbar with parking brake for secure stationary placement and transport Technical Data Manufacturer: SCHORR Model: RR200THX Drive type: V-belt Max. branch thickness: 200 mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter-blade Weight: 255 kg Overall length: 2819 mm Overall width: 1217 mm Overall height: 1550 mm Discharge chute angle: 360° Engine power: 19 kW / 25 HP Displacement: 764 cc Starting system: E-starter The RR200THX is built for long-term use. All components are easily accessible, allowing maintenance to be carried out quickly. Spare parts are available from stock at any time. Upon request, we offer technical service and repairs in our own workshop or directly at your site. Financing Leasing or installment payment available—please contact us for details.

Condition: excellent (used), Year of construction: 2022, operating hours: 135 h, functionality: fully functional, overall weight: 24,740 kg, transport width: 2,540 mm, transport length: 9,141 mm, transport height: 3,604 mm, power: 260 kW (353.50 HP), Equipment: Basic package Inventhor Type 6 - Load-sensing system - 500-liter fuel tank - Longitudinal discharge conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged lubrication strips - 24V electrical control system – additional electric pump for the following functions when the engine is off: "Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear Crodpfxjxd T Hcs Addsk - Hydraulically reversible fan wheel - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Audible start-up warning - Doppstadt telematics system - Paintwork: RAL2011 deep orange Optional equipment: - 260 kW drive train – electric variant - 3-axle drawbar chassis unit - Shredding system size L – 20 teeth - Size L limiter - Additional hydraulic connections 35–80 l/min - Hydraulic travel drive - 350 mm hopper extension, water spray system on both sides - 7 m rear discharge conveyor - Neodymium overband magnet - 7 m frame for overband magnet Delivery date to be agreed upon

Condition: new, overall weight: 2,700 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ - We deliver the perfect vacuum suction system for your application! - Delivery worldwide / Dealer inquiries welcome! Internal Number: #570 Images shown are sample photos. Actual equipment and color may differ. STS V-1.5 Vacuum Tank Trailer Tank: • 1,500-liter tank capacity • Tank hot-dip galvanized • Tank is slightly inclined to the rear for easier cleaning • Side cleaning opening in the tank to remove contaminants or blockages without opening the tank lid • Tank lid opens fully toward the passenger side and is secured with hook bolts • Standard dual safety system installed to prevent compressor damage • Siphon separator • Overflow with dual ball system and sight glass • Vacuum gauge on suction unit with protective frame • Mechanical level indicator with color scale Engine and Compressor: • MEC 3000 vacuum compressor with 3,500 L/min air capacity • Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure: 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • Honda industrial engine GX 390 • Electric starter, oil sensor, control panel with ignition lock, battery, and tank • Internal suction hose to prevent damage to the engine unit • Silencer for vacuum compressor with oil catch • Stainless steel heat shield above the exhaust • 1 liter biodegradable compressor oil stored in oil bottle holder • 5L fuel canister in holder • Standard funnel with long neck for convenient engine oil changes and refilling • All engine components and accessories housed in a lockable motor box • Aluminum motor box powder-coated in desired color Chassis: • Self-supporting chassis, fully hot-dip galvanized • Low-loader tandem chassis, 2.7t • Track width matching passenger cars and Sprinters for optimal driving • Lowest possible center of gravity for the vacuum tank • 2 axles with 1,350 kg load capacity each and independent suspension from a renowned manufacturer • Continuous welded V-drawbar • Robust metal fenders with integrated lamp housing • Stanchion holders for quick and secure hose fastening with rubber bands • Storage options for tools and accessories Vacuum Tank Unit: • Overrun brake with automatic reversing function Credjxffwvspfx Addok • Self-locking ball coupling • Reinforced jockey wheel • 13-pin cable connection Connections and Hoses: • 2x 5m suction hoses (3”) with Perrot couplings • 1x 3” suction lance (1500 mm length) • 1x 3” Perrot connection on lower part of tank lid • 1x 3” Perrot connection, right side in direction of travel Custom builds and special equipment available upon request – Check it out: For more detailed information or images, please contact us directly. You’ll find a wide selection of other vehicles for SALE or RENT at: Subject to changes, prior sale, and errors. The buyer is required to independently verify the condition and features of the goods. Sale is made exclusively according to our terms and conditions and with the exclusion of any warranty.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 320 Path Control – Excellent Condition, CE-Compliant, from a Training Workshop!! Technical Data: >> Year of manufacture: 2010, Machine No. 347285 >> Fixed angle table >> Infinitely variable spindle speed up to 4500 rpm >> Infinitely variable feed on 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis: 5000 mm/min, Z axis: 4000 mm/min >> Travel (X/Y/Z): 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load capacity: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill – SK40 taper >> Hydraulic drawbar system >> Weight approx. 1800 kg >> Required floor space approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Csdpfjxupczjx Addsrk Accessories and Equipment: >> Heidenhain TNC 320 path control >> Hydraulic clamping, vertical and horizontal >> Automatic centralized lubrication system >> Spindle brake >> Technical documentation, spare parts diagrams, control operating manual, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 path control. This universal milling machine is in very good condition and has only a few operating hours. It comes from a facility where it was used exclusively for training purposes. The control system is very easy to operate. Additionally, the machine features hydraulic clamping both vertically and horizontally. Changing from vertical to horizontal operation is straightforward thanks to the fold-away vertical head. The guides are regularly lubricated via the centralized lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to view and test the Kunzmann under power at our premises. A total of 7 Kunzmann WF4/3 machines with Heidenhain TNC 320 control are available. The machines are available for immediate delivery.

Condition: new, overall weight: 2,700 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We deliver the right vacuum suction system for any application! - Delivery worldwide / Dealer inquiries welcome! Internal number: #575 The images shown are sample images. Actual features and color may vary. STS V-1.5 Vacuum Suction Tank Trailer Tank • Tank capacity: 1,500 liters • Tank hot-dip galvanized • Tank slightly inclined to the rear for easier cleaning • Side cleaning port in the tank for removing contamination or blockages without opening the tank lid • Tank lid opens fully towards the passenger side and is secured with clamping screws • Equipped with 2 safety levels as standard to protect the compressor from damage • Syphon separator • Overflow with 2 balls and inspection glass • Pressure gauge on suction assembly with protective bracket • Mechanical level indicator with color scale Engine and Compressor • MEC 3000 vacuum compressor with 3,500 l air capacity • Max. vacuum: -0.8 bar (continuous operation at -0.5 bar) • Max. overpressure: 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • Honda GX 390 industrial engine • Electric starter, oil sensor, control panel with ignition lock, battery and tank • Internal suction hose to prevent damage within the engine unit • Silencer with oil collector for vacuum compressor • Stainless steel heat shield above the exhaust • 1 liter of biodegradable compressor oil in holder • 5l fuel canister in holder • Standard long-neck funnel for changing and refilling engine oil • All engine components and accessories stored in lockable motor box • Aluminum motor box, powder coated in your chosen color Chassis • Self-supporting chassis, fully hot-dip galvanized • Low-bed tandem chassis, 2.7t Codoxffw Ajpfx Addork • Track width identical to car and Sprinter for optimal handling • Lowest possible center of gravity for the suction tank • 2x axles, each 1,350 kg load capacity, independent suspension from a renowned manufacturer • Continuous welded V-drawbar • Robust metal fenders with lamp housings • Stanchion holders for quick securing of suction hoses with rubber bands • Storage options for tools and accessories Suction Tank • Overrun brake with reverse-automatic • Automatically securing ball hitch • Reinforced jockey wheel • 13-pin electrical connector Connections and Hoses • 2x suction hoses (3") 5 m long with Perrot couplings • 1x suction lance 3" (1,500 mm long) • 1x Perrot connection (3") at the bottom of tank lid • 1x Perrot connection (3") side-mounted, right in direction of travel Custom builds and special equipment available on request - Check it out: For more detailed information and/or pictures, please contact us directly. A large selection of further vehicles for PURCHASE or RENTAL can be found at: Modifications, prior sale, and errors excepted. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is subject exclusively to our terms and conditions and excludes any warranty.

Condition: new, overall weight: 3,500 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ - We provide you with the perfect vacuum suction system for any application! - Delivery worldwide / Dealer inquiries welcome! Internal number: #510 The images are sample images. Actual equipment and color may vary. STS VR-2.0 Tank: - 2,000-liter tank capacity - Galvanized steel tank - Tank slightly inclined backwards for easier cleaning - Hydraulic rear tipping with approx. 20° angle for emptying via electro-hydraulic unit - Lateral rinsing opening in the tank to remove contamination or blockages without opening the tank lid - Tank lid opens fully to the passenger side and is secured with hook bolts - Two safety stages standard to prevent compressor damage - Siphon separator – overflow with 2 balls and viewing glass - Vacuum gauge on suction equipment with protective bracket - Mechanical level indicator with color scale Engine and Compressor: - MEC 3000 vacuum compressor with 3,500 l/min air output - Vacuum max. -0.8 bar (continuous operation at -0.5 bar) - Overpressure max. 0.49 bar - Maintenance-free V-belt drive for vacuum compressor - Honda industrial engine GX 390 – electric starter, oil sensor, control panel with ignition lock, battery, and tank - Internal suction hose to prevent damage in the engine unit - Silencer for vacuum compressor with oil catch - Stainless steel heat shield above the exhaust - 1-liter biodegradable compressor oil stored in oil bottle holder - 5l petrol canister in holder - Standard funnel with long neck for engine oil changes/refill - All engine-related components and accessories are housed in a lockable engine box - Engine box made of aluminum, powder-coated in desired color Chassis: - Self-supporting, fully galvanized chassis - Electro-hydraulics with wired remote control - 3.5t tandem low loader chassis - Track width identical to car and Sprinter for optimal driving characteristics Codpfxexd Nt Sj Addjrk - Lowest possible center of gravity for the vacuum tank - 2 axles with 1,750kg capacity each and independent suspension from a reputable manufacturer - Continuous welded V-drawbar - Robust fenders with metal lamp housings - Stake brackets for quick securing of suction hoses with rubber bands - Storage capability for tools and accessories Vacuum Tank: - Overrun brake with reversematic - Automatically locking ball coupling - Reinforced jockey wheel - 13-pin electrical connector Connections and Hoses: - 2x suction hoses (3”) 5m each with Perrot couplings - 1x suction lance 3” (1500mm length) - 1x Perrot connection (3”) in the lower part of the tank lid - 1x Perrot connection (3”) on the right side in driving direction Special builds and equipment available by request. Take a look: For further detailed information and/or photos, please contact us directly. A broad selection of other vehicles for PURCHASE or RENT is available at: Subject to changes, prior sale, and errors. The buyer is responsible for independently checking the condition and equipment of the goods. Sale is exclusively subject to our general terms and conditions and with any warranty excluded.

Condition: new, overall weight: 2,700 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We deliver the right vacuum suction system for every application! - Delivery worldwide / Dealer inquiries are welcome! Internal number: #514 The images are sample images. Actual equipment and color may vary. STS V-1.5 Vacuum Suction Tank Trailer Tank: - 1,500-liter tank capacity - Fully hot-dip galvanized tank - Tank slightly inclined to the rear for easier cleaning - Side rinsing port in the tank for removal of dirt or blockages without opening the tank lid - Tank lid opens completely to the passenger side and is secured with hook bolts - Equipped as standard with two safety stages to prevent compressor damage - Siphon separator - Overflow with two balls and sight glass - Pressure gauge on suction unit with protective shroud - Mechanical level indicator with colored scale Engine and Compressor: - MEC 3000 vacuum compressor with 3,500 l/min air capacity - Vacuum max. -0.8 bar (continuous operation at -0.5 bar) - Overpressure max. 0.49 bar - Maintenance-free V-belt drive for vacuum compressor - Honda industrial engine GX 390 - Electric starter, oil sensor, control panel with ignition lock, battery, and fuel tank - Internal intake hose to prevent damage to engine components - Silencer for the vacuum compressor with oil catchment - Stainless steel heat deflector plate above the exhaust - 1-liter bottle of biodegradable compressor oil stored in a dedicated bracket - 5-liter petrol canister in holder - Standard funnel with long neck for engine oil changes and refilling - All engine tech components and accessories stored securely in lockable aluminum engine box, powder-coated in the color of your choice Chassis: - Fully self-supporting chassis, completely hot-dip galvanized - Low-loader tandem chassis, 2.7 t gross weight - Track width matches that of passenger cars and Sprinters for optimal driving stability Csdpfx Adoxffwisdjrk - Lowest possible center of gravity for the vacuum tank - 2 axles, each with 1,350 kg capacity and independent suspension from a renowned manufacturer - Continuous welded V-drawbar - Robust metal mudguards with integrated lamp housings - Stake holders for fast securing of suction hoses with bungee cords - Storage options for tools and accessories Vacuum Tank: - Overrun brake with automatic reverse function - Self-locking ball coupling - Reinforced jockey wheel - 13-pin electrical connector Fittings and Hoses: - 2x suction hoses (3") 5 meters long with Perrot couplings - 1x suction lance 3" (1,500 mm long) - 1x Perrot connection (3") at the bottom of the tank lid - 1x Perrot connection (3") on the right side, in travel direction Special builds and equipment available on request - Check it out: For more detailed information and/or pictures, please contact us directly. You will find a wide range of other vehicles for SALE or RENT at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively subject to our general terms and conditions and under exclusion of any warranty.

Condition: new, overall weight: 3,500 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We deliver the right vacuum suction system for any application! - Delivery worldwide / Dealer inquiries welcome! Internal number: #565 Please note: images are sample pictures. Actual equipment and color may vary. STS VR-2.0 Tank - 2,000-liter tank capacity - Hot-dip galvanized tank - Tank tilted slightly to the rear for easier cleaning - Hydraulic rear tipping approx. 20° for emptying via electro-hydraulic unit - Side flush opening in the tank to remove contamination or blockages without opening the tank lid - Tank lid opens fully to the passenger side and is secured with hook bolts - Equipped as standard with 2 safety levels to prevent compressor damage - Syphon separator – overflow with 2 balls and sight glass Cedpfx Ajw Ehfxeddjrk - Manometer on suction fitting with protective bracket - Mechanical fill level indicator with color scale Engine and Compressor - MEC 3000 vacuum compressor with 3,500 L/min air flow - Vacuum max. -0.8 bar (continuous operation at -0.5 bar) - Overpressure max. 0.49 bar - Maintenance-free V-belt drive for vacuum compressor - Honda GX 390 industrial engine – electric start, oil sensor, control panel with ignition lock, battery and tank - Internal suction hose to protect the motor unit - Muffler for the vacuum compressor with oil catch - Stainless steel heat deflector above muffler - 1 liter of biodegradable compressor oil stored in an oil bottle holder - 5-liter fuel canister in holder - Standard funnel with long neck for changing and refilling engine oil - All engine components and accessories stored in a lockable aluminum engine box, powder-coated in your preferred color Chassis - Fully self-supporting hot-dip galvanized chassis - Electrohydraulics with wired remote control - Low-bed tandem chassis 3.5 t - Track width identical to car and Sprinter for optimal handling - Lowest possible center of gravity for the suction tank - 2 axles, each with 1,750 kg load capacity and single wheel suspension from a reputable manufacturer - Continuous welded V-drawbar - Sturdy metal fenders with integrated lamp housings - Stake brackets for quick securing of suction hoses using rubber bands - Storage options for tools and accessories Suction Tank - Overrun brake with reverse automatic - Automatically locking ball coupling - Reinforced jockey wheel - 13-pin electrical connector Connections and Hoses - 2x suction hoses (3") 5m long with Perrot couplings - 1x suction lance 3" (1,500mm long) - 1x Perrot connection (3") at the bottom of the tank lid - 1x Perrot connection (3") on the right-hand side in the direction of travel Custom solutions and special equipment available on request - Check it out: For further details and/or images, please contact us directly. A wide range of other vehicles for SALE or RENT can be found at: Subject to change, prior sale, and errors. The buyer is obliged to verify the condition and equipment of the goods independently. Sales are made exclusively subject to our general terms and conditions and under exclusion of any liability for defects.