Used Drum Feeder for sale (5,497)

Year of construction: 2018, operating hours: 1,363 h, condition: used, Model TR 5800 – Screening plant with remote control – Operating hours: 1,263 h – Yanmar engine, 4-cylinder – Drum length: 3.55 m – Drum diameter: 1.55 m – = Further information = Fuel type: Diesel Year of manufacture: July 2018 Model year: 2018 Chedpfx Apszt Ecuotjb Color: Green Drive: Track Unladen weight: 12,500 kg = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 32/5, Rotary screen S = 1.5 Chjdpsztxw Ssfx Aptsb P = 0.55 kW N = 9 rpm Weight: 450 kg Dimensions: 630 x 1500

Year of construction: 2024, condition: new, functionality: unexamined, This is an ATEX-certified filling machine with 4 dispensing nozzles, suitable for standard 10L containers. Cedpfxezxrubo Aptohb It features load cells, allowing each container to be filled with a pre-set weight. The machine was purchased in 2024 but has never been used by us. It is still new in its original packaging. Brand: Boloni.

Condition: ready for operation (used), Year of construction: 2008, bar length: 3,200 mm, overall weight: 900 kg, Bar diameter Ø 5-45 mm Magazine capacity 280 Bar change time 27 sec. Feed rate 150 mm/sec. adjustable Return speed 950 mm/sec. Supply voltage 230/400 Volt Installed power 3 KW Codpfsw Rfiwex Aptshb Compressed air 6 bar Weight 900 kg

Condition: excellent (used), machine/vehicle number: 2069056, Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Codpow Rvu Djfx Aptehb Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: used, Year of construction: 2011, 5 machines for sale only as a PACKAGE: 1. CNC turning center, 3 units Manufacturer: Traub Type: TNL 26 Year of manufacture: 2011 / 2008 / 2006 Operating hours: 64,154 / 75,849 / 81,823 Control: Mitsubishi TX 8i Equipment: - Main spindle - Counter spindle - Upper turret - driven + Y-axis - Lower turret - driven + Y-axis - Front tool holder - driven + Y-axis - Rear tool holder - Bar feeder 2x FMB / 1x Breuning The machines come from an ongoing production process. Chsdpfxszxhxvo Aptsb 2. CNC lathe, 2 units, one defective Manufacturer: EMCO Type: Turn 332 MC Year of manufacture: 2010 / 2008 Operating hours: unknown Control: Siemens Sinumerik 840D Equipment: - Main spindle - Counter spindle - Upper turret - Lower turret - Bar feeder TOP ETL 8-45 One machine comes from an ongoing production process; the other was previously used as a source of spare parts, and several components have been removed. The sale is without clamping devices and tools. Dismantling and loading can be organized by a specialist company for an additional charge.

Condition: like new (used), functionality: fully functional, Hydraulic feeder type 814 300 80 m/min. Csdpeyi Afmjfx Aptohb Motor power: 5.5 kW Control panel Year of manufacture: 1991

Condition: used, color: other, Year of construction: 2007, operating hours: 6,500 h, GVW: 12.700 kg Make of engine: Duetz CE mark: yes Serial number: 101582511260 Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. Chodpfxoy R Uwrj Aptsb All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines.

Condition: used, A compact but robustly built industrial level free standing resaw. Variable feed speeds Suitable for softwoods and hardwoods Quick, simple and safe to operate Feeding system / general capacity. RVP 200 variable speed feed system Steel feed rollers 200mm dia. Variable feed speed 0 - 30 mt/min speed. Max. feed roller to blade clearance 200mm. Max. fence to blade clearance 200mm. Main saw Dia. of saw pulleys 800mm. Max. cutting height 400mm. Max. blade width 80 x 0.8mm. Max. / Min blade length 5530 / 5380mm. Height of the table from the floor 950mm. Table size 1060 x 8000mm. Automatic star-delta starter. Automatic pneumatic braking of wheels. Safety micro-switch to doors. Front infeed support rollers with emergency protection cable. Tilting table 15 dergrees. Telescopic blade guard. CHACO blade guide on the table. Rackwork. Dust scrapers on wheels. Chjdpfx Ajzx D Umjptsb Steel saw blade ready for use. Extraction points x 2 - 100 and 120mm dia. Working air pressure 6 to 8 bar.

Condition: new, Year of construction: 2024, functionality: fully functional, This is an ATEX-certified filling machine, suitable for standard 200L drums. The machine was purchased in 2024 but has never been used by us. It is still new in its original packaging. Brand: Boloni. Csdpfjzx S Eysx Aptshb The machine is sold in its current condition.

Condition: used, axle configuration: 3 axles, first registration: 09/2026, color: other, Year of construction: 1984, Empty weight: 6.800 kg Axle 1: left 1 mm right 1 mm Csdpfx Aezxri Eeptehb Axle 2: left 10 mm right10 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers! 

Condition: used, Year of construction: 2015, overall weight: 5,500 kg, OKUMA OSP-P300L-R control unit, with TOP AUTOMAZIONI XFS370 bar feed system. Workholding and tooling are not included. Chsdpfjzxrx Tjx Aptob AVAILABLE IN NOVEMBER 2026.

Condition: used, functionality: fully functional, Year of construction: 2003, Used Ammann rotary drum dryer Cedpfszxbn Dsx Aptshb Year of manufacture: 2003 Burner: Oertli, year of manufacture: 2003, output: 9.74 kW Infeed conveyor belt

Condition: excellent (used), RETSCH ZM 200 Ultra Centrifugal Mill with DR 100 Feeder Manufacturer: RETSCH GmbH Type: ZM 200 Machine Type: Ultra Centrifugal Mill / Fine Grinding Mill Accessories: RETSCH DR 100 Feeder For sale is a used RETSCH ZM 200 Ultra Centrifugal Mill with RETSCH DR 100 Feeder and extensive accessories. The ZM 200 is designed for the fine grinding of sample material and is offered together with the DR 100 feeder shown in the images, various sieves, rotors, collection and feed components, and other accessories. Technical data: Manufacturer: RETSCH GmbH Model: ZM 200 Device type: Ultra Centrifugal Mill Power supply: 1~ 200–240 V / 50–60 Hz Power according to nameplate: 1,100 W Current consumption: 12 A Operation: digital control and display panel Interfaces: RS232 / RS485 Connection for DR 100 feeder CE marking Feeder: Cedozxqhyspfx Aptjhb Manufacturer: RETSCH GmbH Type: DR 100 Device type: Feeder / Vibration Feeder Digital control and display panel Start/Stop operation Feed hopper and feed chute as shown in the images Dimensions: ZM 200 (L × W × H): 515 × 410 × 365 mm Equipment: RETSCH DR 100 Feeder Feed hopper Feed chute Rotor / grinding tool as shown in the images Various ring sieves / sieve inserts Collection container Filling and collection components Filter bag Various RETSCH spare parts and accessories Operating manual ZM 200 Operating manual DR 100 Other accessories as shown in the images Transport data: Dimensions ZM 200 (L × W × H): 515 × 410 × 365 mm Weight: not specified / not determined Transport or shipping possible by arrangement Condition: Used Device shown in operational state. Display and control panel shown in active state. Optical condition as shown in the images. Signs of wear and tear are present. Scope of delivery: 1 × RETSCH ZM 200 Ultra Centrifugal Mill 1 × RETSCH DR 100 Feeder Feed hopper and feed chute Rotor / grinding tool as shown in the images Various ring sieves / sieve inserts Collection container and filling components Filter bag Operating manual ZM 200 Operating manual DR 100 Extensive accessories as shown in the images Availability: by arrangement. Scope of delivery as shown in the images. Subject to changes, errors and prior sale.

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034613, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max. Feed Speed: 30 m/min - Max. Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Rear extraction with self-centering extractor or front ejection. - Repositioning System: Optional rail allows axial or radial displacement up to 600 mm for lathe access. - Automation: Fully PLC controlled, with brushless motor and digital pneumatic valves for speed and thrust control. - Bar Storage: Single-level magazine, 235 mm capacity. Bar feeder details: TOP Automazione model: FU 352 Semi-automatic Bar Feeder for Horizontal Loading to Lathe (Autonomy depends on bar diameter) Dimensions: Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: - Digital HMI controller for manual operations Chjdpfx Apsxx Scljtob Machine status: - In working condition

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034612, Technical characteristics: Core Specifications Bar Diameter (Round): 6 mm – 50 mm Bar Diameter (Hexagonal): 6 mm – 45 mm Bar Diameter (Square): 6 mm – 37 mm Bar Length Options: 1200 mm – 3200 mm Maximum Feed Speed: 30 m/min Chodpfx Asxx Sfaoptjb Maximum Remnant Length: 300 mm Required Air Pressure: 6.5 – 7.5 bar Operating Voltage: 230V / 50 Hz Weight: 1200 kg Design & Features Guide Channel: Manually interchangeable, made of Vulkollan-type plastic, suitable for high-speed bar rotation. Front Steady Block: Interchangeable every 5 mm for optimal bar support. Remnant Management: Rear extraction via self-centering extractor or front ejection available. Repositioning System: An optional rail system enables axial or radial displacement up to 600 mm for lathe servicing. Automation: Fully PLC-controlled, equipped with a brushless motor and digital pneumatic valves for speed and thrust control. Bar Storage: Single-level magazine with a 235 mm loading capacity. Bar Feeder: TOP Automazione Model FU 352 SX SEMI-AUTOMATIC BAR FEEDER FOR HORIZONTAL LOADING TO LATHE (AUTONOMY DEPENDS ON BAR DIAMETER) Dimensions Bar Feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: DIGITAL HMI CONTROLLER FOR MANUAL OPERATIONS Machine Status: OPERATING

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Rod loader, Topload 4-25 Year of manufacture: 2014 Chsdpfx Aszwb Uzepteb Previously mounted on an Emco E25.

Year of construction: 1997, operating hours: 30,000 h, condition: used, functionality: fully functional, OVERHAUL in 2022 New reinforced table – 660x960mm No support leg /it is available for mounting, but the program needs to be updated/. It has a new controller and can operate in sheet feeding mode. Price: 80,000 PLN Below are the specifications: Effective forming area 650 x 950mm Chodpfx Aszt Suksptjb Table stroke 300 mm Film width Up to 700 mm Installed power 15 kW Heating panel power 13 kW Pneumatic table lifting 0.4 MPa Compressed air consumption 5 m3/h Thickness of forming material 0.15-6mm Performance in cycles per hour 40 - 100 Weight approx. 250kg Dimensions: depth x width x height 1250mm x 2230mm x 2040mm

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230021, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min Chedpfjxx R S Eox Aptjb - Max Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, manufactured from Vulkollan-type plastic for optimal bar rotation at high speeds. - Front Steady Block: Interchangeable in 5 mm increments for precise bar support. - Remnant Management: Supports rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enabling axial or radial displacement up to 600 mm for lathe servicing. - Automation: Complete PLC control with brushless motor and digital pneumatic valves for feed speed and thrust regulation. - Bar Magazine: Single-row magazine with a 235 mm load capacity. # Bar feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Dimensions: - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Main Features and Capabilities: - HMI digital controller for manual operation Machine status: WORKING

Condition: used, Year of construction: 2005, overall weight: 7,400 kg, FANUC Series 18i-TB control system, IEMCA AUTOMATA 2.5 robot loader – year 2010. Chodpfx Aszxr Izoptob AVAILABLE FROM NOVEMBER 2026.

Condition: ready for operation (used), functionality: fully functional, bar length: 3,200 mm, bar diameter (max.): 43 mm, overall weight: 900 kg, Bar diameter Ø 5-45 mm Magazine capacity 280 Min. bar changeover time 27 sec. Feed rate 150 mm/sec., adjustable Chedpfew Rcfvsx Aptob Return speed 950 mm/sec. Supply voltage 230/400 Volt Installed power 3 KW Compressed air 6 bar Weight 900 kg

Condition: new, *IMMEDIATELY AVAILABLE* Chsdpfozy Axysx Aptob Includes: Manual winch Features: Net: €5,037.82 / Gross: €5,995.00 Article number: BKT227281600.01 Technical data: • Brand: Blyss • Model: KTT 27 • Vehicle type: Cable reel trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 280 x 160 x 0 cm • External dimensions (LxWxH): 470 x 234 x 218 cm • Loading height of the floor: 0 cm • Permissible total weight: 2,700 kg • Unladen weight: 711 kg • Payload: 1,989 kg • Chassis: Low loader (wheels next to the superstructure) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Designed for cable reels up to a diameter of 2800 mm and a width of 1600 mm. • Standard tube holder approx. xx mm • Torsion-resistant chassis with a massive holder frame, hot-dip galvanized • Easy operation of the holder frame with or without a cable reel • Barrier-free insertion of the cable reel • Play-free mounting and securing of the reel by fixing • Massive support wheel holder and rear support • Stable telescopic crank supports at the front and rear • Incl. Robust and maintenance-free manual winch • Very stable steel frame welded • Frame completely hot-dip galvanized • Plastic mudguards • Reverse automatic • KNOTT drawbar and parking brake • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • License plate holder 340x200mm _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any desired options! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Hand winch Features: Net: €5,000.00 / Gross: €5,950.00 Article number: KET118331600.01 Technical data: • Brand: Stedele • Model: KET 18 • Vehicle type: Cable reel trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 330 x 163 x 0 cm • External dimensions (L x W x H): 325 x 220 x 171 cm • Loading height of the floor: 0 cm • Permissible total weight: 1,800 kg • Unladen weight: 430 kg • Payload: 1,370 kg • Chassis: Low-loader (wheels beside the superstructure) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Designed for cable reels up to a diameter of 1600 mm and a width of 1300 mm. • Standard tube holder approx. 60 mm • Torsion-resistant chassis with a solid receiving frame, hot-dip galvanized • Easy operation of the receiving frame with or without a cable reel • Barrier-free insertion of the cable reel • Play-free storage and securing of the reel by fixation • Solid support wheel holder and rear support • Stable telescopic crank supports at the rear • Incl. Robust and maintenance-free hand winch, pulling force approx. 2,300 kg • Very stable steel frame, welded • Frame completely hot-dip galvanized • Robust aluminum tread plate fenders, walkable • Reversing automatic system • ALKO overrunning device and parking brake • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Foldable license plate holder _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about special requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Chsdpszy Agkjfx Aptsb Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF15063530, Technical Characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz Chedoxx R Nqspfx Aptjb - Weight: 1200 kg Design & Features - Guide Channel: Manually interchangeable, made of Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Offers rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system allows axial or radial displacement up to 600 mm for lathe servicing. - Automation: Fully PLC controlled with brushless motor and digital pneumatic valves for speed and thrust regulation. - Bar Storage: Single-level magazine with a 235 mm load capacity. Bar Feeder: TOP Automazione Model: FU 352 - Dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Main Features and Capabilities: - HMI digital controller for manual operations. Machine Status: WORKING - Set of guide channels and accessories for bar clamping worn - Set of bearings for pusher head worn

Condition: like new (used), Tilting mixer for stainless steel drums. Cedpfx Aozxk Rzsptohb