Used Drum Feeder for sale (5,002)

Condition: used, can be used as crumber or pre-duster (only dry coatings) ideal for irregular shapes all stainless steel adjustable speed mobile outfeed conveyor Nodeymnnbspfx Ag Nowc belt width 400 mm outside dimensions (l x w x h) : ± 3.000 x 1.600 x 1.900 mm

Year of construction: 1971, condition: excellent (used), Brand: Sun Mountain Type: FTM Year of construction: 1971 Dimensions: approx. B 1,00 X 1,00 x H 1.50 m Weight: approx. 500 kg All information without guarantee. Njded Sdg Sepfx Ag Nowc The machine is located in a very good condition. A demonstration of power is possible in our showroom at any time.

Year of construction: 2000, condition: excellent (used), For sale: Professional closed powder feeder Sulzer Metco / Oerlikon Metco – model 9MPE-DJ (Closed Loop Powder Feed Unit). The device is designed for precise and stable dosing of powders in thermal spray processes (HVOF, APS, plasma, etc.). Nameplate data: • Model / Type: 9MPE-DJ • Year of manufacture: 2000 • Power supply: 115 / 215 / 230 V • Frequency: 50 / 60 Hz • Power: 0.92 kW • Current: 4 A • Phase: single-phase Features and equipment: • Closed-loop powder feed control – excellent repeatability of dosing • Operator panel with display and membrane keypad • Precision carrier gas regulators (rotameters, pressure gauge) • Powder hopper/tank located at the bottom of the cabinet • Mobile housing on casters Nedpoyg U Rvsfx Ag Nswc • Complete set as shown in the photos Technical condition: • Device is complete and well maintained • Normal signs of use consistent with age • Visible Oerlikon Metco service stickers (serviced in the past) • Was recently in use in an industrial installation Applications: • Thermal spray lines (HVOF, plasma, arc, flame) • R&D laboratories and industrial production • Precision dosing of metallic and ceramic powders

Condition: used, functionality: unexamined, Ferwood code: RU0007495 - Manufacturer code: CIMR-G5C43P7 - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer refurbishment service, please contact us. 4KG - 36X26X21cm Nsdpeyk Ehgsfx Ag Newc

Condition: ready for operation (used), Year of construction: 2002, - Max. bar length: 1,560 mm depending on the spindle of the automatic lathe - Material diameter: 5–80 mm Nwedeyk Dwgjpfx Ag Nsc - Additional guides required for this - Material support surface: 650 mm - Dimensions LxWxH: 2,000 x 1,150 x 1,400 mm - Weight approx. 500 kg

Condition: used, Auger diameter: 35 cm Length: 385 cm Discharge opening: 45 cm x 33 cm Infeed width: 217 cm Nwedpfxoxz R Rae Ag Njc Infeed height: 175 cm

Condition: used, Conveyor transporter for feeding products to a height of 400 cm. Nwjdpfjvzz T Asx Ag Nsc Currently, the conveyor was used to feed preforms to a PET bottle blow molding machine, but it can also be used for transporting other products to significant heights. Manufacturer: M. TANNER AG Model: VZT-2000 Conveyor height: 4300 mm Belt width: 500 mm Weight: 850 kg All components included with the machine are shown in the photos. Machine condition: used, requires technical inspection.

Condition: new, feeder 4 rollers roller DM 120 mm roller width 60 mm motor power 0,75 kW motor speed 1.400 U/ min feeder speed 3 - 18 m/min, variable weight approx. 37 kg without stand optional with stand ‘standard’ or ‘stand 1050’ Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. Nwedoh Dikwspfx Ag Nsc • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm Njdpfema Dkfex Ag Nowc seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg

Condition: used, Used O'Hara Technologies model Labcoat IIX 316 stainless steel coating pan system. Unit has (1) 762mm diameter perforated drum, (1) 482mm diameter drum & (1) 381mm diameter drum. Approx batch sizes range from 1kg to 40kgs. Unit has local controls. Unit includes Servolift units for drum handling. Nodsyma Dnspfx Ag Njwc

Condition: used, Year of construction: 2021, operating hours: 494 h, HAMM HD8VV Roller from 2021 with only 494 operating hours! ----* Manufacturer: Hamm * Model: HD8VV * Year of manufacture: 2021 * Read operating hours: approx. 494 * Operating weight: approx. 1,590 kg * Unladen weight: approx. 1,450 kg * Kubota diesel engine / 16.1 kW * Water sprinkler system * Transport length: approx. 2.295 m Nwsdoynqycopfx Ag Nsc * Transport width: approx. 0.88 m * Transport height: approx. 2.21 m * Additional photos and video available upon request * Price: 12,900 EUR, net + 19% VAT. ---- For further questions, please call: Erik Kortum: WhatsApp All information provided without guarantee or warranty. Subject to errors and prior sale.

Condition: used, Year of construction: 2017, operating hours: 4,814 h, Bomag BW100AD-5 roller from year 2017 with spreader and operator protective canopy! ----* Manufacturer: Bomag * Model: BW100AD-5 Roller * Year of manufacture: 2017 * Recorded operating hours: approx. 4,814 * Operating weight: approx. 2,312 kg * Working width: approx. 1 metre * Spreader * Operator protective canopy * KAG * German machine, 1st owner * Water spray system * Vibration * Kubota diesel engine * More photos and video available on request (WhatsApp Erik: ----For further questions, please call: Nwodpeynqx Ssfx Ag Nec Erik Kortum: WhatsApp All information provided without guarantee or warranty, errors and prior sale excepted.

Condition: used, Year of construction: 2019, operating hours: 4,107 h, Bomag BW100AC-5 combination roller from year 2019 with 4,107 operating hours! ----* Manufacturer: Bomag Nsdpfx Aoynqyisg Nswc * Model: BW100AC-5 Combination Roller * Year of manufacture: 2019 * Indicated operating hours: approx. 4,107 * Operating weight: approx. 2,400 kg * Working width: approx. 1 meter * German machine, single owner * Water spray system * Vibration * Kubota diesel engine * Additional photos and video available on request (WhatsApp Erik: ----For further questions, please call: Erik Kortum: WhatsApp ?All information without guarantee or warranty. Subject to errors and prior sale. ?

Year of construction: 2025, condition: new, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h We produce: Drum dryer Belt dryer pipe dryer Pellet plant Mills Nodpjghmp Nefx Ag Newc crushers Brsgistoyp Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Condition: new, Year of construction: 2025, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Nedpfx Ajq Igyvog Newc Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, control type: NC control, bar length: 3,000 mm, bar diameter (min.): 25 mm, bar diameter (max.): 72 mm, IEMCA Maxis 72 Nwedpfx Ageykk Dmo Noc

Year of construction: 2001, condition: used, Technical details: Numbers of turbines: 1 Stck. drum length: 580 mm operating hours: 30.810 h compressed air: 5 - 7 bar filling volume: 100 dm³ total power requirement: 24,2 kW total wight: ca. 5,8 t Njdpsu Nu Nkofx Ag Nowc DRUM - Shotblasting Plant in a closed drum Manual and automatic operation technical specifications: -spinning wheel Ø = 380mm -drum Ø = 1150 mm x length 580 mm -max. filling weight = 220 kg, filling volume 100dm³ -piece size (max. edge length) = 100mm -Turbines 380mm; 15.0 kW -blast media discharge speed approx. 80.0 m/s -Ablast media throughput/turbine approx. 240.0 kg/min. -Steel abrasive grade, nothing else possible! (recommended is: StD-Z 0,6 DIN 8201 HV 700) -Compressed air with cartridge filter system approx. 12 m³/h The plant is not electrically connected. Sale as currently is at the warehouse Leipzig (see last photos). Machine has been functional before dismantling. *

Condition: new, Year of construction: 2025, functionality: fully functional, Description: Nodpfx Ajynb N Ijg Nowc New price: €45,000 – open to offers. For sale is a brand-new FMB Turbo 5-65 bar feeder, year of manufacture 2025. The unit has never been put into operation and is in mint, factory-new condition. The Turbo 5-65 is the ideal solution for loading bar stock with diameters from 5 to 65 mm into CNC lathes. Its robust cast iron bed ensures maximum running smoothness and precision. Technical data & highlights: - Year of manufacture: 2025 (new unit) - Condition: Unused / Original condition - Material diameter: Ø 5 – 65 mm - Control: Modern 8.4" touch operating panel (mobile) - Feature: Highest vibration damping due to solid machine bed - Availability: Immediately from stock (no long manufacturer lead times) - Complete bar feeder including documentation and standard accessories

Condition: new, functionality: fully functional, fuel type: electric, color: yellow, Year of construction: 2026, The bunker of the PRO-150 Mobile crushers has been developed by our engineers as user-oriented to operate with high-level efficiency. The vibration speed of the vibrating feeding bunker is easily guided by the automation system which can be adjusted manually. This feature prevents the bunker from wearing out and provides the user with longer and more efficient usage. In order to avoid any performance loss due to the damp or muddy material processed in the crusher plants, the wobbler feeder contains all the necessary qualities. While the wobbler feeder has potential to process without any problems for many years. Aslo stands out with easy maintenance feature as well. The poor quality of material separated in the wobbler feeder is thrown into the bypass belt and therefore user get a high-quality final product. Additionally; if desires, the materials falling into the bypass can be sent directly to the screen thanks to the reversible conveyor in the bypass system under the wobbler feeder. FABO primary impact crushers are designed to crush soft and medium hard stones with high rotor speed. It is considered as the heart of the mobile system. With the help of high-speed rotating rotor crushing hammers, the products poured from the feeder are crushed with the help of pallets. Hydraulically adjustable rods allow the products to be obtained in the desired size. FABO folding type hydraulic belts send the right product to the crusher and the stock area according to customer requests after sorting through the vibrating screen. With foldable structure, the plant minimizes dimensions of the machine for the transportation. The number of stock belts can change due to customer requests. 10 mm EP 125 4-ply belt elastics moving on twisted sheets perfectly transport the aggregate coming out of the screen to the area desired by the user. Belt elasticity, which produced resistant to wear, offers many years of life without letting customer down. Nedpfjyf Ibfex Ag Njwc The flap system is a special system that allows the directly crushed material to be taken from the crusher with the help of the pre-stock belt without being screened in the mesh. The plant minimizes production time with its unique location just in front of the screen.

Condition: used, Year of construction: 2016, operating hours: 965 h, Dynapac CC1200C combi roller from 2016 with only 965 operating hours! ---- * Manufacturer: Dynapac * Model: CC1200C combi roller * Year of manufacture: 2016 * Displayed operating hours: approx. 965 * Operating weight: 2,470 kg * Water sprinkling system * Power: 26.1 kW * 1st owner * CE documentation available * Good condition Nwsdpjymvf Uofx Ag Njc * Additional photos and video available on request (WhatsApp, Erik) * Price: €13,900 net + 19% VAT. ---- For further questions please call: Erik Kortum: WhatsApp All information provided without guarantee or liability, subject to errors and prior sale.

Condition: used, Year of construction: 2016, operating hours: 773 h, HAMM HD8VV roller from year 2016 with only 773 operating hours! ----* Manufacturer: Hamm * Model: HD8VV * Year of manufacture: 2016 * Indicated operating hours: approx. 773 * Operating weight: approx. 1,580 kg Nwsdpfx Aoymvgfsg Njc * Unladen weight: approx. 1,450 kg * Kubota diesel engine / 14.8 kW * Water sprinkler system * Transport length: approx. 2.295 m * Transport width: approx. 0.88 m * Transport height: approx. 2.21 m * Additional photos and video available upon request * Price: 9,900 euros, net + 19% VAT ---- For more questions please call: Erik Kortum: WhatsApp ?All information provided without guarantee; errors and prior sale excepted.?

Condition: used, Year of construction: 2014, operating hours: 1,495 h, Dynapac CC1200C combination roller from 2014 with only 1,495 operating hours! ---- * Manufacturer: Dynapac * Model: CC1200C combination roller * Year of manufacture: 2014 * Indicated operating hours: approx. 1,495 * Operating weight: 2,470 kg * Power: 26.1 kW * 1st owner * CE document available * Good condition * Additional photos and video on request (WHATS APP, Erik) * Price: €12,900 net + 19% VAT. ---- For more questions please call: Erik Kortum: WhatsApp Nwjdpfxjymvfus Ag Njc All information provided without guarantee or warranty, errors and prior sale excepted.

Condition: good (used), axle configuration: 2 axles, first registration: 09/1988, suspension: air, color: blue, Year of construction: 1988, Make axles: BPW Brakes: drum brakes Suspension: air suspension Empty weight: 3.340 kg Carrying capacity: 22.960 kg GVW: 26.300 kg Technical condition: good Nodsyi D Ebjpfx Ag Njwc Visual appearance: good Please contact Arie or Pedro for more information

Condition: excellent (used), Robust industrial machine made in Germany: Walther Trowal, model DLT 4, year 1980. The device is intended for surface finishing of metal, aluminum, or plastic parts – trowalizing process (deburring, edge rounding, polishing, cleaning). Classic drum-type construction – reliable, heavy-duty, and durable, typical for “West Germany” manufacture. Technical data: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Drum speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • Complete machine, drum rotates smoothly and evenly. • Perforation and internal lining in good condition. • No visible cracks or structural damage. • Requires electrical connection and possibly a basic inspection. • Ideal for tool shops, machining plants, or production lines. Application: • Deburring and cleaning parts after machining. • Polishing metal or aluminum components. • Finishing screws, bushings, stamped parts, castings, and precision components. Condition: used, robust, classic Walther Trowal construction – ready for light refurbishment or immediate operation. Nsdpfx Agsxmlins Newc

Condition: new, Year of construction: 2026, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15-20 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes as stand-alone machines or machine lines. This machine is a flexible and efficient automatic board feeder developed for pallet production machines, but also well suited for other applications within the wood industry. The machine is specifically designed to integrate with both deck nailing machines and leg nailing machines, regardless of brand or capacity. We have supplied automatic board feeding systems to nailing machines from, among others, Cape, Corali, Storti, IMH, IM Hart, Viking and Mychrome. Thanks to the reliable vacuum system and the simple maintenance-free one-piece feeder – based on our own patented solution developed more than 40 years ago – only minimal adjustments are required when changing dimensions. This results in short changeover times and high operational reliability. The machine equipment also includes a tilting package lift that tilts the package approximately 10 degrees. This ensures that the boards remain stable and do not fall apart when the straps are removed, even if the boards are not perfectly aligned in the package. As optional equipment, the system can be complemented with: - Automatic turner - Vision/Camera system - Automatic removal of sticks between board layers The end result with this type of feeders is a reliable and flexible high-quality solution that enables more productive and cost-efficient pallet manufacturing. Material dimension of a standard machine: Board length: 600-1600mm, board width: 60-150mm, board thickness: 16-32mm Package length: 800-1600mm (packages with boards shorter than 800 should be on a EUR-pallet), package width 800-1200mm, package height: 0-1400mm Feeding capacity: 50 boards/min (with board width 100mm) Machine dimensions (LxWxH): 4300x3700x2800mm Nsdpfxoyk Tlge Ag Nowc The machines is CE-marked. Do not hesitate to contact us for more information, pictures and videos.