Used Dry Spray Wall for sale (9,891)

Year of construction: 2006, condition: ready for operation (used), I sell the edge spraying automat with UV-drying and sanding units MAKOR GEMINI 56, Baujahr 2006. 2-Zone Vacuumpainting with self pumps system WITHOUT lost paint 2-Zone UV-drying 2 pcs. Edge sanding aggregates tiltable. Hnodpfx Aboim Eyxo Iot Material is immediately dry and useable ! Very good condition. Available immediately. Possible to test.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 050.940-08, LUTRO Painting and Drying System – 2 Booths + Dryer – Year of Construction 2008 Price: €24,900 (negotiable) net Dismantling and removal to be carried out by the buyer For sale is a comprehensive LUTRO painting and drying system for professional/industrial use. The system was manufactured in 2008 by LUTRO Luft- und Trockentechnik GmbH and, according to the available nameplates, consists of two booths and one dryer. The system also includes the existing ventilation/filtration system, heating/burner technology, and the electrical control system with a Siemens SIMATIC touch panel. The system is currently still assembled on-site. This allows a prospective buyer to gain a good impression of the layout, components, and scope of the system before purchase. System components: 1. LUTRO KSP 7 BT Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: KSP 7 BT Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.0 m Max. component width: 3.5 m Max. component height: 2.0 m Max. wheel load: 700 kg Usable volume: 81 m³ Total steam volume: 127 m³ Connected power according to nameplate: 7.5 kW Air velocity: 0.24 m/s Air flow rate: 24,000 m³/h Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 1,713 g Maximum permissible solvent quantity during spray operation: 80,000 g/h 2. LUTRO KSP 8 BT Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: KSP 8 BT Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.5 m Max. component width: 3.5 m Max. component height: 2.5 m Max. wheel load: 1,000 kg Usable volume: 122 m³ Total steam volume: 178 m³ Connected power according to nameplate: 11 kW Air velocity: 0.23 m/s Air flow rate: 30,000 m³/h Minimum exhaust air volume flow: 1,800 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 2,321 g Maximum permissible solvent quantity during spray operation: 100,000 g/h 3. LUTRO TR 1 Dryer Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: TR 1 Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.0 m Max. component width: 3.5 m Max. component height: 2.0 m Max. wheel load: 700 kg Usable volume: 81 m³ Total steam volume: 107 m³ Connected power according to nameplate: 4 kW Air velocity: 0.15 m/s Air flow rate: 15,000 m³/h Minimum exhaust air volume flow: 900 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 1,307 g Maximum permissible solvent quantity during spray operation: 50,000 g/h Equipment / existing components Based on a visual assessment, the system includes, among other things: 2 LUTRO booths 1 LUTRO dryer Large-area floor extraction with grating Ceiling filter/supply air system Supply and exhaust air technology Ventilation units Heating/burner technology Air ducts Electrical switch cabinets LUTRO system control Siemens SIMATIC touch panel Hsdpfx Aezwvb Asb Ijnt Booth doors and personnel doors with viewing windows Lighting and other existing system equipment In principle, the system scope present on-site will be sold. Condition The system is in used condition, reflecting its age, and is currently still assembled. Important note regarding dismantling and transport Dismantling is not included in the purchase price. Price €24,900 (negotiable) net Inspection / further information An inspection of the system is possibl

Condition: used, Year of construction: 2000, with new ASCOM gunl control, PLC, light curtain, and touch panel, mounted at the inlet of the automatic sprayer. - Manufacturer: Venjakob - Type: VEN SPRAY Duo - Retrofit 2026 (year of manufacture: 2000) - Working width: 1300 mm - Right-hand operation - Price for reconditioned machine - Current condition, in the reconditioning phase - Duo pistol drive - Dry extraction - Exhaust air capacity 10,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 5 and 14 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total connection ~ 19kW - Length: 6,485mm - Width: 3,690 mm - Height: 2,497 mm - Volts, Hz 400 / 50 - Color light gray 7035 + black - Location, in stock - Voltage fluctuations max. +/- 5% The photos show only one example of a refurbished automatic sprayer. _____ Hedpozv Tcnjfx Ab Ient Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: excellent (used), Weiss SC 1000/+20IU Corrosion Climatic Cycle Test Chamber Weiss SC 1000/+20 JU Corrosion Climatic Cycle Test Chamber The test system is a combination of a climatic test chamber with variable temperature and humidity and a corrosion test chamber with a salt spray test. At-risk metallic components are tested for corrosion in a time-lapse manner according to the relevant standards. Temperature Working Range Temperature: +20 °C ... +60 °C Temperature variation over time: +0.5 °C Climatic Working Range Temperature: +20 °C ... +60 °C Temperature variation over time: +0.5 °C Relative Humidity: 10...98 % RH Temperature variation over time: 3...5 % RH Dew point: +12 °C ... +59 °C Salt spray test SS (ambient temperature range +5 °C ... +50 °C) according to DIN 50 021 (salt spray via dual-fluid nozzle, 1.5 x 0.5 mV 80 cm h) Control Digital measurement and control system SIMCON/32*-Net with touchscreen control panel Interfaces - Serial interface RS 232 C - Parallel printer interface Operating modes adjustable via process controller: - Temperature mode - Air conditioning mode - Salt spray test - Direct spraying with saline solution - Condensate load - Flushing test chamber walls - Drying/ventilating test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: Psychrome fresh measuring device TFT (with forced humidification) Technical data SC 1000/+20 JU Usable space dimensions Height up to sloped roof approx. 1000 mm + roof approx. 350 mm Width approx. 1100 mm Hnedpsph U Dhsfx Ab Ist Width between heaters approx. 1000 mm Depth approx. 1000 mm Test room door made of glass, hinged on the left Height approx. 1350 mm Width approx. 1000 mm External dimensions including unit components and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch control panel approx. 1700 mm Depth approx. 2600 mm Floor load max. 100 kg Brine storage tank approx. 200 l, with level monitoring separately next to/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Power rating: 13 kW Weight: 1300 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Hjdpfx Ajzubtljb Ijnt Further technical documents and documentation for the system are available and can be provided upon request.

Condition: used, Year of construction: 2002, -with belt cleaning at the machine outlet under a folding table with belt conveyor. In 2021, the PLC control, the touch screen control, and the frequency converter for the spraying-gun drive were replaced. - Manufacturer: Venjakob - Type: HGS-Duo/C - Retrofit 2026 (year of manufacture 2002) - Working width 1,300 mm - Operating side right - Price for refurbished machine - Current condition, in the refurbishment phase - Gun drive in duo design - Dry extraction - Exhaust air capacity 10,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 5 and 14 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total connection ~ 19kW - Length: 6,485mm - Width: 3,690 mm - Height: 2,497 mm - Volts, Hz 400 / 50 - Color light gray 7035 + black - Location, in stock - Voltage fluctuations max. +/- 5% The pictures are examples of an unrefurbished spray machine of the same type. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us! Hnedezv Tfcjpfx Ab Iet

Condition: new, XPLAN is the result of nearly 50 years of Incoplan’s experience in providing a highly efficient and energy-saving method for drying wood, worldwide, in all climate conditions. Compared to conventional air exchange systems, condensation drying with XPLAN requires approximately 60% less electrical energy. This is a gentle drying method, particularly suitable for hardwoods and softwoods, allowing their characteristics to be preserved. XPLAN is available in 3 versions: LITE, up to 10 m³ STANDARD, with additional fans for tunnel structures PRO, up to 20 m³ of wood. Build or purchase your own structure, install and connect XPLAN, and start your drying process. We provide a complete design for the ideal chamber to be built, material suggestions, and all the information you need. The images show the three versions, with suggestions for the homemade chamber structure and walls. The electrical cabinet is always included and connected to the machine. The software is automatic, touchscreen-operated, and contains several preloaded drying programs. TECHNICAL DATA SPECIFICATION COMPRESSOR NOMINAL HP 1.5 kW SHIPPING WEIGHT 154 kg AUXILIARY HEAT 4 kW INTERNAL BLOWER MOTORS 0.25 kW motor; airflow 3,060 m³/h HEAT TREATING CAPABILITIES Yes, up to 71° C (only with Heat booster) CIRCULATING FANS 2 included: 400 mm fans, 0.25 kW, 3,060 m³/h each POWER REQUIREMENTS 5.8 kW (28A) - 400 V 50 Hz (1-phase) DIMENSIONS (H X L X W) 94 × 83 × 52 cm (base unit only) Hsdjw Ug Atjpfx Ab Ient 1 power vent system included (includes exhaust and intake) DRYING TIME 25mm Green Pine - 80% to 8% in approximately 12 days. 25mm Green Oak - 65% to 8% in approximately 35 days. LOAD CAPACITY For softwoods and fast-drying hardwoods (Pine or Poplar) 3-5 m³ For slow-drying hardwoods (Oak) 10 m³ NOMINAL WATER REMOVAL RATE 114 kg per 24 hours - 5 l/h

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: A1106011/1300, working width: 1,300 mm, overall weight: 7,500 kg, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. working width: 1,300 mm Max. workpiece thickness: 120 mm MACHINE DETAILS Voltage: 400 V Current consumption: 36 A Fuse rating: 63 A Hnjdpfjzzbcgex Ab Iet Connected load: 17.0 kW Weight: 7,500 kg Transport weight: 7,500 kg Number of transport packages: 8 units EQUIPMENT 4 spray guns Wagner pump system

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, machine/vehicle number: 35120025 (inkl. Zubehör 35120030/35120035/35120040), type of input current: three-phase, space requirement height: 2,010 mm, space requirement length: 2,374 mm, space requirement width: 754 mm, Sollich nut mixing unit, type NM 200 VA, year of manufacture 2021, for the continuous mixing of dry ingredients into chocolate, fat, and spreadable products. Performance: • max. 1,200 kg/h of spreadable product with 5% dry ingredients (60 kg/h) • max. 1,200 kg/h of spreadable product with 10% dry ingredients (120 kg/h) Equipment: • retractable mixing screw for simplified cleaning, recommended for frequent product/color changes • 2 installed rotary valve feeders TD 1 (machine no. 35120030 and 35120035), arranged opposite each other, each with a level switch and a 150-liter hopper. This allows two different dry ingredients to be dosed in parallel or double the dosing capacity for one dry ingredient to be achieved. • Double-walled collection hopper at the mixer outlet with emptying pump SKP 1000 L-VA (machine no. 35120040) Hnedezzvhdspfx Ab Iot • Unheated connecting pipe attached to the side of the lower container section to the hopper for complete emptying via the attached rotary lobe pump SKP 1000 L-VA, can be shut off on both sides with flat flap valves, pipe can be removed via milk pipe fittings and quick-release couplings. • Hot water circulation system with water-water heat exchanger and circulation pump to supply the mixer, collection hopper, emptying pump, and piping to the filling system, for connection to the customer's cold water supply. • Stainless steel control cabinet for housing the power electronics • Visualization and operation are carried out ex works via the HMI of the associated tempering machine; a separate operating panel is not part of the unit. • Completely installed on a mobile stainless steel frame with swivel casters or lifting tabs for moving with a lifting device, frame with ergonomic handle, all media connections are pluggable or with quick-release couplings. This makes the unit mobile and can be switched between several lines. For operation with another control system, an adjustment of the visualization is required; the power electronics are included in the supplied stainless steel control cabinet. Connection requirements: • customer's cold water for the hot water circulation system • 400 V, 3 phases, 50 Hz + neutral + earth Condition, history and process: Year of manufacture 2021, delivery and commissioning by Sollich in week 40/2021, approximately 180 operating hours. Used exclusively for palm oil-free spreads including nut-containing products, stored dry in Wuppertal since the end of 2024, inspection by appointment. Documentation and conformity documents are available. Purchase value in 2021 according to order confirmation: €116,830 (unit complete including rotary valve feeders, emptying pump and stainless steel frame). Sale from business to business with exclusion of warranty, technical specifications according to manufacturer's documents, subject to errors. This nut mixing unit is also available as part of a complete tempering and mixing system (including Turbotemper TE 1600 D and cooling unit), see advertisement ID A22725782.

Condition: used, No. 3280 Complete painting line / water-wash spray booths Used, system still completely assembled, from a furniture manufacturing company Large complete painting line, consisting of various water-wash spray booths, spraying equipment, extensive roller conveyor system as well as fresh air and exhaust air ducting Several water-wash spray booths / spray walls Spray booths partly designed as 3-sided booths Turntable available Various spraying units / pumps available Extensive roller conveyors for workpiece transport Fresh air supply / air technology available Exhaust air ducts / extraction system available Lighting above the spray booths available Dimensions of the spray booths approx. 3000 x 2000 mm / 2000 x 2000 mm / 2500 x 2000 mm Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Hnsdpfx Ajzhblnsb Ist Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. Hedpszz Rpcjfx Ab Isnt - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 701, The electrode drying oven SET-50/4 features 4 shelves, each with 5 separate compartments for electrodes, allowing for organized storage of various electrode types. The capacity of the device is sufficient for the contents of approximately 50 packages of stick electrodes. Hedpfx Aoz Ahciob Ient The housing and door are double-walled and well-insulated. The device has a thermostat with an indicator light, allowing the drying temperature to be adjusted continuously up to 400 °C. The interior, including the shelves, is made entirely of stainless steel. Upon request, we can include an analog thermometer with a display range of 0-400 °C. Thanks to all these features, the SET-50 is the ideal device for stationary applications. It is delivered without a power cable and plug. Capacity: up to 250 kg of electrodes Dimensions in mm: 1080 x 740 x 810 Weight: 65 kg Temperature: 400 °C Heating power: 3700 watts Input voltage: 230 V 50 Hz

Condition: used, Year of construction: 1994, functionality: fully functional, Listing for Machineseeker – Used CEFLA Painting Line (Fully Operational) For sale is a complete, fully operational paint booth machine dismantled from a used production line. Manufacturer: CEFLA – premium industrial equipment for professional coating applications. System Components: 1 pc. belt conveyor • Length: approx. 1,900 mm • Belt width: 1,400 mm • Conveyor speed: 1.7 – 10.7 m/min 1 pc. CEFLA EASY 2000 automatic spraying machine Condition: Used, fully functional Regularly serviced Immediately ready for use Field of application: Ideal for industrial coating and drying processes, e.g. furniture or wood processing sectors. Hnjdpfjxdwi Iox Ab Ist Other information: Viewing possible by appointment

Condition: used, functionality: fully functional, 400 kg storage box/container for dry ice. 10 units for sale! Price: €550 per unit Worldwide shipping. Hsdezzq Tuopfx Ab Isnt Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: used, Year of construction: 2008, - Producer Elmag Superfici - Type Magnum 3.2.2 - Year of construction 2008 (2010) - Working width 1.350 mm - Working height 900 mm + - 20 mm - Operating side, right - Actual condition, machine is not overhauled - Duo gun drive system - Spraying gun carrier independently controllable - Dry filter system - Exhaust air 13.500 m³/h - Transport belttransport System - Feed speed adjustable bis 18 m/min - 2 belt cleaning units - Belt cleaning system with roller - Belt cleaning system, behind the machine - Lacquer reclaiming system with v-belt - Gun control system - PLC control with touch screen - Number of installed lacquer circles 2 Stk. - Supply air box - Length ~ 6.680 mm - Width 4.455 mm - Total connection power ~ 26.3 KW Hnedpfxszf N Dts Ab Ijt - Voltage / HZ 400 / 50 - Location, not on stock - Voltage fluctuation max. +/- 5 %

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: C116353, Equipment: CE marking, Reconditioned Production Ready！ Ref Code:1014 Emmegi Classic Magic Electronic double‑head cutting‑off machine Twin‑head saw for aluminium and PVC profiles, with NC‑controlled DC motor driving automatic mobile head movement. All angles pneumatically settable down to 22°30’ external. Key Features Blade: Ø 450 / 500 mm cemented carbide blades Cutting length: 5 m useful cut Angle range: 90° to 22°30’ external (pneumatic tilt) Positioning: Magnetic strip direct measuring system Control: Alphanumeric fluorescent display (2 × 40 chars) Memory: 99 profile corrective values (auto angle calculation) 20 cutting lists (50 rows each) via keyboard 10 cutting lists (100 rows each) via USB (PC) Connectivity: USB port, RJ45 network card; label printer ready Hnedpfxsy U Tczs Ab Ijt Clamping: Horizontal/vertical pneumatic vices with low‑pressure device Safety: Pneumatic full protective hoods for cutting zones Lubrication: Water spray‑mist (oil emulsion or minimal quantity oil) Technical Specifications Motors: 2 × 2.2 kW (400 V); total 5.3 kW Blade speed: 2,800 rpm Operating pressure: 6–8 bar; air consumption 15 NL/cycle Dimensions (5 m version): 9,400 × 1,080 × 1,840 mm (L×D×H) Weight: Approx. 1,500 kg Applications High‑precision cutting of aluminium / PVC profiles for windows, doors, curtain walls, and light alloy processing.

Condition: used, mileage: 2,42,466 km, power: 120 kW (163.15 HP), first registration: 05/2015, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front under the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, battery 100 Ah, additional battery (reinforced), 1-pole battery disconnect switch, turn signals at the front on the side, roof control unit with reading light on driver/passenger side, entry lights, additional main key, folding cover for storage compartment, configurable special module, spare wheel with Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps at the front, seats in the cab: passenger seat comfort, seats in the cab: driver's seat comfort, reinforced rear stabilizer, reinforced front stabilizer, fuel gauge for auxiliary heater, separating relay with additional battery, rear wall lining, thermal insulation of the driver's cab, heat-protective glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag on the driver side, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both sides, brake assistant, braking system with ABS+ASR, headliner in the cab, lockable glove compartment, body/superstructure: standard platform, fuel tank: main tank 75 liters, headlight range adjustment, truck approval, engine 2.1 liters - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to Euro 5 emission standard, safety belt system with warning system (driver side), seat cover/upholstery: fabric Lima, maintenance interval indicator Assyst, permissible total weight 5.00 t, dual tires on 2nd axle / rear axle * 1st owner * Rear axle with air suspension * Ambulance and rescue vehicle with box body * Superstructure from WAS * Adjustable floating table * Stretcher frame * Light carrying chair * Central locking for patient compartment * KONVEKTA air conditioning * 1 attendant seat * Refrigerator compartment * Warming cabinet * Sink * Medicine cabinets * Oxygen and suction system pre-installed * 12 + 230 Volt sockets * Skylight * External storage compartments * Rear wing doors with step * Side door with sliding window and step * All-round work lights * Partition with sliding window * Ambient lighting left, right and rear * 2x interior lighting, bright white and blue * Cab with 2 seats * 2x air conditioning at the front and rear * Automatic transmission * Telma retarder * Electric windows * electrically adjustable and heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Dual-tired rear axle * Extra pneumatically extendable step at the rear * Superstructure dimensions: L=3.650 x W=1.900 x H=1.980 mm * Wheelbase: 3.650 mm * Permissible total weight: 5,000 kg * Unladen weight: 4,415 kg Proper all-season tires from Conti, DOT 2024, at the front with approximately 6.0 mm and at the rear with approximately 4.0 mm tread depth Engine, automatic transmission, and rear axle are dry The engine runs smoothly, and the automatic transmission shifts cleanly Starter battery is new +++ Errors, changes and prior sale reserved Hodpsz A Ncbjfx Ab Isnt

Condition: used, Year of construction: 2004, - Manufacturer Cefa - type. KLEENSPRAY - Year of construction 2004 - Operating side left - Working width 1.200 mm - Working height 900 mm + - 20 mm - Gun drive single version - Dry extraction - Extraction nozzle diameter 490 x 350 mm - Exhaust air capacity 6,500 m³/h - Paper belt transport system - Infinitely variable feed speed 1.5 - 7 m/min - PLC control with touch screen - Number of spray guns installed 0 pcs. - Height-adjustable spray guns - Number of paint pumps 0 pcs. - Suitable for solvent-based paints - Suitable for water-based paints - Length 4,450 mm - Width 3,360 mm + 1000 mm - Height 2,600 mm - Total connection ~ 7.1 kW / 28.6 A - Volt, Hz 400 / 50 - Location, in stock - Voltage fluctuations max. +/- 5 _____ Hnodpjzv Td Sjfx Ab Ist Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2004, Spraying machine Venjakob VEN SPRAY-K All pictures only for example - Producer Venjakob - Year of construction 2004 - Current condition: not refurbished - Offer price for refurbished condition - Working width 800 mm (1000) mm - Operating side, right - Duo gun drive system - Dry filter system 4.000 m³/Std. - Diameter exhaust air pipe 400 mm - Transport belttransport System - Feed speed adjustable 3 - 8 m/min - Lacquer reclaiming system with v-belt - Gun control system LS 1 - Number of installed lacquer circles 1 Stk. - Airless spraying system 4 Stk. Krautzberger KAA 1300 - Number of lacquer pumps 1 Stk. - Producer lacquer pump Wagner 35-70 - Suitably for solvent based lacquer Hnodpfozv Tg Hjx Ab Ijt - Suitably for water based lacquer - Total connection power 7 kW, Stromaufnahme 17 A , Absicherung 35 A - Location, on stock - Voltage fluctuation max. +/- 5 % _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2005, - Producer Venjakob - Type. VEN SPRAY DUO/C CNC 6000 Hjdpfx Aszv Tdrob Isnt - year of construction 2005 - Working width 1300 mm - Operating side right - Price for overhauled machine - Actual condition, machine not overhauled - Pistol drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2 - 7.5 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen CNC- Installed colour circles 2 pcs. - Quick-change system for spray guns - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated in machine - Total connection ~ 29 - Volt, Hz 400 / 50 - Colour RAL 7035- Location, in stock - Voltage fluctuations max. +/- 5 % Picture shows an example of a reconditioned automatic machine _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Condition: used, Year of construction: 2014, With paper web and belt conveyor with web cleaning.System consisting of: 1. Feeding conveyor 2,000 mm 2. Spraying machine 3,630 mm 3. Take-off roller conveyor 2,000 mm - Total length: 7,630 mm - Operator side: leftItem 1 Feeding belt: - Manufacturer: Venjakob - Model: Belt Conveyor AL - Year of manufacture: 2014 - Feed rate: approx. 2.5–5 m/min. - Max. load: 15 kg/m - Length: 2,000 mm - Motor power: 0.5 kW - Variable-frequency drive (VFD) controlledItem 2 Automatic Spray Machine:Can be operated with either the belt conveyor system or the paper belt conveyor system!- Manufacturer: Venjakob - Model: VENSPRAY Smart - Year of manufacture: 2014 - Working width: 1,300 mm - Working height: 920 mm ± 20 mm - Operating side: left - Suitable for solvents and water-based coatings Hnsdpfjzv Tfvox Ab Iet - Price for a refurbished machine - As-is condition; machine has not been refurbished - Spray gun drive in Duo configuration - Dry extraction - Exhaust port diameter: 400 mm - Exhaust air flow rate: 7,000 m³/h - Feed speed: infinitely adjustable ~ 2.5–5 m/min - Light curtain, part detection, Type LS 25 - Touchscreen control - Paper belt transport system - Belt squeegee and cleaning system Type R1 - Number of paint circuits installed: 2 - Number of spray guns installed: 4 - Quick-change system for spray guns - Spray guns, Type Kremlin Airmix AVX - Airmix spray system - Number of paint pumps: 1 - Pump manufacturer: Wagner Cobra 40/25 - Length: 3,630 mm - Width: 3,450 + 990 mm - Total power consumption: 16 kW - Location: not in stock - Voltage fluctuations: max. ±5%Item 3 Acceptance of roller conveyor: - Manufacturer: Venjakob - Type: Roller conveyor - Year of manufacture: 2014 - Feed rate: approx. 2.5–5 m/min - Max. load: 15 kg/m - Length: 2,000 mm - Roller spacing: 150 m - Variable-frequency drive controlled Images are for illustrative purposes only; they are not originals*

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Pre-filtration and protection Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Dual softening unit Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Technical data: Permeate flow rate at 15 °C: approx. 450 l/h Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Hsdpfx Aezt Sb Dob Ijnt Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Diaphragm expansion tank: 8 liters Permissible water temperature: 1–30 °C Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Condition: new, Year of construction: 2024, RHS spray cleaning system Supplied as standard with: - Single washing tank. - Basket movement by gearmotor (possibility of managing fixed-tilt-full rotation). - Siemens PLC - possibility of creating and managing washing recipes. - Timer for setting the washing time. - Electrically adjustable heating. - Stainless steel washing pump. - Removable coarse filter in the tank. - Thermal insulation of the entire system. - Magnetic/electronic control of correct door closure. - Level sensor / protection for too low level. - Automatic water filling. - Vapor aspirator. Available in various configurations with: - 50-100 micron bag filter. - Drying with fan and electric heaters. - Oil separator - Emptying pump. Technical features: - Loading capacity: Single basket 670x480xh.400 mm or No. 2 450x300xh.200 mm. - Maximum allowable weight: 100 kg. Hnodpfx Aerywyaob Iot - Tank volume: 400 Lt.

Condition: new, Year of construction: 2024, SM11 spray cleaning system Supplied as standard with: - Single washing tank. - Basket movement by gear motor. - Timer for setting the washing time. - Electrically adjustable heating. - Stainless steel washing pump. - Removable coarse filter in the tank. - Electronic control of correct lid closure. - Level sensor / protection for too low level. - Tank drain with ball valve for bath change. Available in various configurations with: - Whole system thermal insulation. - 50-100 micron bag filter. Hedpfxjrwmyhs Ab Isnt - Vapor aspirator. - Drying with fan and electric heating elements. - Drying with high-pressure blower and air blade. - Oil separator. - Automatic water filling. - Emptying pump. Technical characteristics: - Basket diameter: ø1100 mm. - Internal useful height: 700 mm. - Maximum allowable weight: 250 kg. - Tank volume: 260 Lt.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 2,000 h, AMV 7450D SHOTCRETE ROBOT – DISMANTLED SHOTCRETE APPLICATION UNIT – 2012 For sale: a professional, dismantled AMV 7450D Shotcrete Robot application unit, designed for wet-mix shotcrete application. The unit was manufactured by the renowned Norwegian company AMV Andersen Mek. Verksted AS, which specializes in the design of machinery for tunnel, mining, and underground operations. IDENTIFICATION DATA: * Manufacturer: AMV Andersen Mek. Verksted AS, Norway * Model: AMV 7450D Shotcrete Robot * Year of unit manufacture: 2012 * Serial number: 12-0070 * Year of base vehicle manufacture: 2012 * Original chassis: Mercedes-Benz Actros * Type: mobile shotcrete robot * Application technology: wet-mix method * Number of operators: 1 * Operating voltage: 400 V AC * Permissible/technical weight as indicated on the AMV nameplate: 44,500 kg – parameter related to the complete machine configuration * Current condition: unit is dismantled from the chassis KEY OPERATIONAL PARAMETERS: * Maximum concrete pump output: up to 25 m³/h * Vertical reach of the boom: approximately 13.7 m * Horizontal reach of the boom: approximately 13.7 m * Working material: shotcrete * Operating method: wet-mix shotcrete application * Working system: specialized tunnel boom with spray nozzle * Unit power supply: 400 V AC * Water tank: capacity to be confirmed * Operating pressure of the system: to be confirmed based on technical documentation * Actual weight of the dismantled unit: to be confirmed DEVICE DESCRIPTION: The AMV 7450D is a specialized shotcrete robot designed for efficient and precise application of concrete in challenging underground environments and on large infrastructure projects. The extended working boom allows for shotcrete application at height and in hard-to-reach locations that are inaccessible to conventional concrete pumps. The output of up to 25 m³ of concrete per hour enables efficient execution of large areas and work requiring rapid ground stabilization. The machine is designed to be operated by a single operator. This solution reduces the number of workers in the immediate shotcrete application zone, improving safety and control over the process. * construction of concrete tunnel linings, * shotcrete application in road and railway tunnels, * mining and quarrying operations, * reinforcement of underground excavations, * securing rock walls and ceilings, * ground stabilization after excavation, * reinforcement of shafts and underground chambers, * construction of subways and other underground structures, * stabilization of slopes and embankments, * execution of landslide protection measures, * geotechnical works, * protection of foundations and deep excavations, Hnsdpfjzw T Sxox Ab Iot * reinforcement and repair of concrete structures, * repair of dams, canals, and other hydraulic structures, * protection of rock surfaces against spalling, * work on hydroelectric power plants and technical tunnels, * execution of specialized infrastructure contracts. The equipment is intended primarily for tunnel, mining, geotechnical, construction, and hydraulic companies, as well as companies engaged in the repair and modernization of specialized AMV machinery. Additional photos, videos, nameplate photos, and information regarding the included equipment can be provided. Please feel free to contact me for further information and to arrange a viewing.